How do I access my external drive over the web with my iPhone. The drive is attached to my Time Machine.
How do I access my external drive over the web with my iPhone. The drive is attached to my Time Machine. I am new to Apple and am trying to get all my stuff working together.
This is not a supported feature of iPhone or Time Capsule.
Similar Messages
-
How do I access an external hard drive attached to an Airport Extreme using the Finder's "Go to the folder" feature?
I have an external hard drive attached to my Airport Extreme and I can access it just fine through Finder. I would like to be able to keyboard navigate to it in an efficient manner. I tried to use the "Go to the folder" feature but was unable to.
I had tried dragging the drive to the Network folder but the shortcut it created does not lead to the drive's contents...it seems to lead right back to the parent directory:
I hope I explained the question well. Thank you for all of your help and time in tending to my inquiry.Cant you set up "back to my mac" then go to finder preferences and put a check mark under everything under the shared location. Also set up back to my mac on your airport extreme.
-
How do I access my encrypted User Account files from my Back Up hard drive? Time Machine was used to create the back up disk; File Vault was used to encrypt the files.
Thanks. I will try going through TM. Since my Simpletech is on the way out, I'll be plugging in a new external hard drive (other than the back-up drive) and trying to restore the library to the new drive. Any advice or warning if this is NOT the right thing to do?
Meanwhile, that is a great tip to do an alternate back-up using a different means. It's been tough to figure out how to "preserve access" to digital images and files for posterity, knowing the hardware will always fail/obsolesce sooner or later, and that "clouds" are only as good as their consistent and reliable accessibility. Upping the odds with redundancy will help dull the edge of my "access anxiety", though logically, it can never relieve it. Will look into
Carbon Copy Cloner. -
How to install Snow Leopard on Macbook Pro? keep getting msg- cannot install Internal HD is used for Time Machine- this was reset to external HD and still get msg?
At some point, your internal HD was selected for use as Time Machine backups, and a Backups.backupdb folder was created at the top level. So OSX thinks you're trying to install it on the same drive as your backups.
Open your internal HD with the Finder (you won't find it via a Spotlight or Finder search) and delete that folder. -
I have CD version of Adobe Photoshop Element 9. I have CD version of Adobe Photoshop Element 9. I have purchased the new Macbook which does not have DVD drive. Can I download this software over the web and install using the Serial Number I have. Thanks,@
yes,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Installed GoFlex 1.5 TB external drive on my iMac running OS X 10.7.4 and error says Time Machine can't create a backup folder. Any solutions?
Well, to unmount the drive, you can use the Terminal application.
Start in Applications > Utilities > Terminal.
When the Terminal window opens, type - without the quotes and with the space at the end - this:
"diskutil unmount "
Then drag the icon of the unmounted drive from the desktop into the Terminal window - the drive location will be added to the end of the command above. It should look something like this:
diskutil unmount /Volumes/volumename
Then press enter (return).
That should unmount the drive. Now you can try the Time Machine process again with perhaps a different interconnect cable for the GoFlex. -
# Question
How do I disable those pesky "hover-over" pop ups? I tried the method of right clicking on them and opting out, but it doesn't work. If you guys could add some kind of blocker to your browser, it would be a huge plus!Chris CA wrote:
Did you createa smart playlist? It's purple with a gear icon.
And you set the criteria to
Match rule:
Date added is in the last two weeks?
I tried it, but couldn't get it to work. I think I had trouble with the Rule. I put a Rule in as follows: Data added in the last five hours? I added music (data) but nothing appeared in my Smart Playlist. Oh yes - I named the playlist: Recently Added.
What did I do wrong? Is it necessary to have a question mark at the end of the Rule? I couldn't find anything on how to create a Smart Playlist in Help. There is stuff in there, but it does not go into much detail, i.e., nothing on the proper wording of the Rule. -
hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem please
and this is an pic for the problemThere is some troubleshooting for 0xE8 error codes on this page : http://support.apple.com/kb/TS3221 - you could see if anything on that page fixes it
-
How can I restore files from my old iMac to this new purchased MacBook Air? I am using time machine backup in my old imac.
Hi,
Try Target Disk Mode
OS X Yosemite: Transfer files between two computers using target disk mode
There is also Migration Assistant.
OS X Yosemite: Transfer your info from a computer or storage device -
How can i use isight camera to broadcast to web with Mac OS 10.4?
I am using an iBook G4 running OS 10.4 as a printer server. I have to do this to be able to print on my HP DeskJet 882c printer from computers running OS 10.6 and above (although I have not been able to get it to work with 10.8).
I can connect an iSight camera to the iBook via FireWire. Can I set that up to broadcast a video feed to a web site so I can visually monitor the area near the laptop and printer?jrmnewtonma wrote: How can i use isight camera to broadcast to web with Mac OS 10.4?
You could use compatible older versions of QuickTime professional extensions for your Mac OS X version.
This professional quality software is very powerful, and it will certainly stream any video you need. However, it is not simple to use, so be prepared to do some research and study to get it configured and working.
To use your iBook with its OS X 10.4, you will need QuickTime Broadcaster 1.5.3
and Darwin Streaming Server (v5.5.5) (if you need streaming server functions.)
Although I have never used it, QuickTime Streaming Server 4.1.1 might be a useable substitute for Darwin.
Message was edited by: EZ Jim
Mac OSX 10.8.3 -
I have a new Macbook pro. I downloaded all previous Itunes purchases and then sync my IPhone. The New songs that I purchased today appear on the IPhone however it will not play. How do I fix the issue with my IPhone?
Hey Etti101,
I'd start off your troubleshooting process by deleting and redownloading the songs:
If iTunes in the Cloud is available in your country, try the following steps to resolve the issue:
Delete the purchased song that is exhibiting the problem from your iTunes library.
Click on the Purchased link in the iTunes Store to view your previously purchased music.
Download your previously purchased song from this list.
via: Songs in iTunes may not play back completely
http://support.apple.com/kb/TS4357
Regards,
Delgadoh -
I re-send a mail with 3 pdf attachmets to an outlook account and the attachments do not arrive to the receiver, if the receiver is a Windows PC. If the receiver is an iPhone the attachments can be accessed til the moment Unload the full message is pushed
It is NOT legitimate. It is SPAM
The latest Firefox release is 7.0.1 which you should update to by visiting http://www.mozilla.org/en-US/firefox/new/ -
How can i start the web analyzer to look the report
HAi
I created a query in Bex. And then i created the 'Web templates' for this query in WAD.
Now how can i start the Web Analyzer to look this query in the web. I want to see only through web analyzer.
So pls tell me how can i start the web analyzer. i mean step-by step method for opening the web analyzer and to look the report.
thnaks
kumarHi Ravi.
The web analyzer is not used to open templates created in the WAD. If you want to open the query in the web analyzer you should open it by calling the 0ANALYZER template ID. I.e. http://server.domain.com:port/sap/bw/BEx?cmd=&template_id=0ANALYZER&sap-language=EN
Alternatively you can open the web template created in the WAD in the browser by clicking "Execute in the Browser..." or just enter the template ID in the URL provided above.
Hope it helps (assign points if helpfull!).
BR
Stefan. -
how to burn a video produced in iMovie in iDVD: with gratitude for the advice received I used the "professional quality" setting in iDVD for a video which in iMovie is 1h 20min long. however this also failled. where did I go wrong, please?
the message sked me to alter the quality of the DVD as the content was too large for the quality sellected.
PLEASE HELP again,
THANK YOU VERY MUCH
MIchaelCheck the Advanced ➙ Project Information menu option to make sure the playing time of the entire project, movie plus menu is below the 120 minute limit.
OT -
How can I obtain the web site template of the ''Imvelo Safari Lodges'' that appears on the Site of the day web page?
Hi Ginette,
The site that you are referring to does not appear to be a template that you can get your hands on, however, I will suggest that you contact the owner via their contact us page and see what can be done.
- Abhishek Maurya
Maybe you are looking for
-
Need ideas for a validation concept
Hello, I am a bit helpless about validations on my page! I have a page with a lot of items, which are particularly filled with AJAX. When a button is pressed these items should be validated before a page process runs. And of course if a validation fa
-
Runtime error during opening a process chain in rspcm
Hello, i created a process chain just a simple one which loads Data from the DataSource into a DSO and then into a InfoCube. I executed this processchain without activiating my Initial-Request in the DSO. So i got a hanging Request there, i deleted a
-
i downloaded songs to my phone at xmas and when i plugged in to my laptop it wiped the phone of new purchases when i try and download them to my computer in itunes via previous purchesses it wont load the list and i keep getting error 10053 can any1
-
Using VOFM Transaction can we generate an IDOC automatically
Hi I have a requriement that when ever we change the sales order Rejection Status Field (ABSTA). An IDOC needs to be generated and the status should be sent to third party. Once the IDOC is generated we use XI to transfer the message to third party.
-
Problem: Deploy a SSO Third Party Integration Adapter in Portal
A user want to deploy a SSO third party integration adapter (Novell Access Gateway) in Portal (AS v10.1.2.0.2). And used method in Note 430877.1. They can login through Novell Access Gateway and login Portal, but when click search user button, there