How do I access the preset frames in Photoshop Elements 11?

I have been using Corel PaintShop Pro 14 and have switched to Photoshop Elements 11.  It came with Preset frames for using on your photos.  I wondered if Elements 11 has the same feature and if so how can I access them?

Open your image in Expert mode. On the top menu click:
Window >> Graphics
In the graphics panel click the second pull down menu (to the top right)and choose frames.
Scroll through the thumbnails and double click on one to apply to your image. Then save.

Similar Messages

  • How do you open the clone panel in Photoshop Elements 12, it isn't shown in the windows list

    I am trying to access the clone panel in Photoshop Elements 12. The tutorials I have seen show a drop down list from the windows button, however on my drop down list there is no clone panel.
    I guess my question is does PE12 have a clone panel and if so how do I access it?

    I've never heard of a "clone panel" but the clone stamp is in the Enhance section on the right side, below the Healing Brush. If you see the pattern stamp there instead, just click the clone stamp in the tool options at the bottom of the window.

  • How can I download the Mac version of Photoshop Elements 12?

    I downloaded the Windows Version of Photoshop Elements 12 instead of Mac version....how do I get this fixed
    Thanks

    download the mac version.
    what's the problem?  if you need a link it's here:  http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
    follow all 7 steps to dl.

  • How can i uninstall the free download of photoshop elements 10?

    how can i uninstall my free download of photoshop elements 10?

    Simply use the unijnstaller in your Add or Remove Programs system panel on Windows or the relevant Application Support:Adobe:Installer folder on Mac.
    Mylenium

  • How can I download the trial version of Photoshop Elements on Windows Vista?

    I am eager to try out the trial version of Photoshop Elements 7.0-however I can’t download it!  I get to 99% downloaded and then get a fatal error telling me that there are integrity check problems.  I am using Windows Vista.  I have also tried removing and downloading it again but this hasn’t worked.  Does anyone know what I should do?

    Hi,
    I believe your issue must be resolved by now, else you can try it again and see if it working fine now or not.
    Also, this link might be of some help to you: http://kb2.adobe.com/cps/400/kb400530.html
    Regards,
    Ankush

  • How can I change the installed PC for Photoshop Elements 11?

    I already installed pfotoshop elements 11 on a pc.but  I want to uninsutal lthis one,and install other new  pc.How shoud I do?
    Tell me detail , how  to do deactivatin?

    open pse 11>click help>deactivate.
    before doing the above, make sure you have your serial number recorded.  otherwise, use Belarc Advisor - Free Personal PC Audit, for software, hardware and security configuration information on your computer.…
    install pse 11 on your new computer using the installation file(s) and your serial number.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • How do I change the install location of Photoshop Elements 12

    I downloaded elements through Adobe Download Assistant to my D:/ drive on my Win 8.1.
    When I continue to install it, it only gives me the option to install it to "C:\Program Files\Common Files\Adobe\PSE12STIInstaller".
    I tried to open it as an Administrator but I'm still unable to change it, it doesn't even give me the option.
    Am I not supposed to be able to change it?
    Thanks, Isak.

    OaknestHill you can choose the install location during the installation process.  Please see the screen shot I took below of the appropriate screen.
    You will want to click on the Change button to select your installation location.  Please be aware there are shared files/resources which will still reside on the hard drive which contains your operating system.
    If you are unable to click on the Change button then I would recommend you begin with trying the installation under a newly created local administrator account.

  • How to access the Text Frame, when we use scrollable frame,

    Hi Friends,
    How to access the Text Frame, when we use scrollable frame,
    Thank you,
    [ Nav ]

    That's the same question:
    how can I access something (a page item) on a page…
    Answer: you need something unique in that object you can get a handle on.
    Or you use the selection a user of your script is doing and work with that selection…
    A "scrollable frame" is nothing special. What it makes it a "scrollable frame" is the DPS software.
    So you have to look for attached labels on the object, that identify the object for the PDS plug-in "Overlay Creator" as a "scrollable frame". That's possible with the "extractLabel("KeyString")" function. But you need to know the appropriate key-string in advance.
    In another of your thread in the DPS forum, I basically answered the question how to obtain those key-strings.
    When knowing the key-string you could loop through all your page items (you can skip all text frames) in the allPageItems-collection, to identify the "scrollable frame" by extracting the right label.
    If you have more than one "scollable frames" you need a second unique identifier for the particular object.
    That could be nearly any property.
    Keep in mind, there is no "scrollableFrames" collection in the DOM !
    Uwe

  • How do I access the web utility with model cisco sf302-08p ?

    Hi,i have a problem with the model Cisco SB SF302-08PP Switch , i connect a cable rj45 to my pc and configure the adapter local area connection (ip address:192.168.1.252), the LEDs blink green, and go to the address bar and get the IP by default, which according to the manual is 192.168.1.254 and the result is: page not found. Is there any way to change the web utility? How do I access the web utility?

    restore  the switch by holding more than 30 seconds and try accessing with ip 192.168.1.254. username and password is "cisco". before change your base ip to 192.168.1.2-253.try to ping and check the connectivity

  • How do I access the web-based utility

    I just purchased a wireless router...WRT300N. I want to access the "web-based utility" in order to update the firmware.
    How do I access the web-based utility...help!
    Thanks.

    Access the router’s web-based setup page.
    For instructions, click here.
    Linksys Easy Answer 4030, applies to WRT300N
    Upgrading the Linksys Router's Firmware
    Hope this helps,
    Lilla
    Westell 6100 modem/router; Linksys WRT54GL v1.1 router firmware 4.30.9; Linksys WPC54G v2 Notebook Card; CenturyTel DSL using PPPoE

  • How can I access the Attribute Values from the Search Region

    Hi all,
    I have a table which contains Company id, department id, and PositonId. For a particular Company and Department there may be multiple records.
    I have to pupulate a table which contains the position and other details that comes under a particular Department and Position based on the selection in the Three comboBoxes.
    Also I have to populate a select many Shuttle to add new postions and records under a particular Department.
    I created a query panel *(Search Region)* for the serch and a table to display the data. That is working fine.
    Now the issue is I am using a view criteria to populate the shuttle with two bind variables ie, DepartmentId and CompanyId.
    If the serach will return a resuktant set in the table it will also pupulate the correct records, otherwise ie, if the if the serch result is empty the corresponding iterator and the attribute is setting as null.
    SO I want to access the attribute values from the Search Region itsef to populate the shuttle.
    I don't know how can I access the data from the Search Region.
    Please Help.
    Regards,
    Ranjith

    you could access the parameters entered in search region by the user as follows:
    You can get handle to the value entered by the user using queryListener method in af:query.
    You can intercept the values entered as described
    public void onQueryList(QueryEvent queryEvent) {
    // The generated QueryListener replaced by this method
    //#{bindings.ImplicitViewCriteriaQuery.processQuery}
    QueryDescriptor qdes = queryEvent.getDescriptor();
    //get the name of the QueryCriteria
    System.out.println("NAME "+qdes.getName());
    List<Criterion> searchList = qdes.getConjunctionCriterion().getCriterionList();
    for ( Criterion c : searchList) {
    if (c instanceof AttributeCriterion ) {
    AttributeCriterion a = (AttributeCriterion) c;
    a.getValues();
    for ( Object o : a.getValues()){
    System.out.println(o.toString());
    //call default Query Event
    invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
    public void onQueryTable(QueryEvent queryEvent) {
    // The generated QueryListener replaced by this method
    //#{bindings.ImplicitViewCriteriaQuery.processQuery}
    QueryDescriptor qdes = queryEvent.getDescriptor();
    //get the name of the QueryCriteria
    System.out.println("NAME "+qdes.getName());
    invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
    private void invokeQueryEventMethodExpression(String expression, QueryEvent queryEvent){
    FacesContext fctx = FacesContext.getCurrentInstance();
    ELContext elctx = fctx.getELContext();
    ExpressionFactory efactory = fctx.getApplication().getExpressionFactory();
    MethodExpression me = efactory.createMethodExpression(elctx,expression, Object.class, new Class[]{QueryEvent.class});
    me.invoke(elctx, new Object[]{queryEvent});
    Thanks,
    Navaneeth

  • I'm trying to set up Family Sharing. My settings show that the people I chose are there but I don't see any shared information. How do I access the shared info?

    I'm trying to set up Family Sharing. My settings show that the people I chose are there but I don't see any shared information. How do I access the shared info? All computers are using Yosemite 10.10.1 and are new 13" MacBook Pros.

    Hi wmcknigh,
    Welcome to Apple Support Communities.
    The article below should help you resolve the issue with shared content not appearing after setting up Family sharing on the MacBook Pros.
    If you don't see your family's shared content - Apple Support
    Cheers,
    -Jason

  • How can I access the Home Sharing Library from my iPad?

    We have an ipad 2 with ios 7, and an imac with itunes 11.1.3
    Just heard about home sharing and want to use this - surprised we haven't heard of it before
    home sharing is turned on in itunes (file > home sharing).
    home sharing is on for the ipad (settings > music)
    They are both connected to the same wifi network (usually our computer doesnt use wifi and is wired, but we turned wifi on just for this)
    When I open music in the ipad (even after continually quitting and reopening the app) there is no 'more' button in the bottom right that there is supposed to be.
    What is wrong? How do I access the library from the ipad? Help please!

    Welcome to the Apple community.
    More does more than home sharing, so it's odd that it isn't there, even if home sharing wasn't working for some reason. Are you sure you are in the music app and not the iTunes App.

  • I have just acquired an iMac desktop. I want to sign on to my airport wireless network, but cannot remember the password. How can I access the password or reset it. I already use a MacBook Pro and an iPad on the network.

    I have just acquired an iMac desktop (about 4 years old). I want to connect to my Apple airport wireless network, but cannot remember the password. How can I access the password or, if necessary, reset it. I already use a MacBook Pro and an iPad on the network and don't want to jeopardize what already works well. I am not all that computer literate.

    How can I access the password or, if necessary, reset it.
    Read the user manual that came w/your Airport router or you can cross-post in one of the  AirPort Forums for instructions. 

  • On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
    If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
    If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

Maybe you are looking for