How do I access the web utility with model cisco sf302-08p ?

Hi,i have a problem with the model Cisco SB SF302-08PP Switch , i connect a cable rj45 to my pc and configure the adapter local area connection (ip address:192.168.1.252), the LEDs blink green, and go to the address bar and get the IP by default, which according to the manual is 192.168.1.254 and the result is: page not found. Is there any way to change the web utility? How do I access the web utility?

restore  the switch by holding more than 30 seconds and try accessing with ip 192.168.1.254. username and password is "cisco". before change your base ip to 192.168.1.2-253.try to ping and check the connectivity

Similar Messages

  • How do I access the web-based utility

    I just purchased a wireless router...WRT300N. I want to access the "web-based utility" in order to update the firmware.
    How do I access the web-based utility...help!
    Thanks.

    Access the router’s web-based setup page.
    For instructions, click here.
    Linksys Easy Answer 4030, applies to WRT300N
    Upgrading the Linksys Router's Firmware
    Hope this helps,
    Lilla
    Westell 6100 modem/router; Linksys WRT54GL v1.1 router firmware 4.30.9; Linksys WPC54G v2 Notebook Card; CenturyTel DSL using PPPoE

  • Error: "Cannot access the web server" with BlazeDS Turnkey

    Help! I'm new to Flex and BlazeDS and Eclipse.  I was trying to setup a Flex Project using a BlazeDS/Tomcat server running from Eclipse on Windows XP per the example in flexbandit.com/archives/55#comment-269 and in (www.infoq.com/articles/blazeds-intro).   I am NOT using the Eclipse Flex plug-in.  I'm using Flex Builder for the Flex code.
    Here's what I've done:
    I installed BlazeDS and tested http://localhost:8400 - That worked.
    I setup Tomcat in Eclipse.  -  That seemed to work.
    I created a Dynamic Web Project in Eclipse - That seemed to work.
    I created the bare-bones BlazeDS Configuration under the Eclipse project and then created a basic HelloWorld java class.
    I added the destination in the “remoting-config.xml” file found in the c:/projects/workspace/ReportGenTool/WebContent/WEB-INF/flex” directory:
    <destination id="HelloWorld">   <properties>  <source>HelloWorld</source> </properties> </destination>
    When I started the application server by clicking on the server's green play button in Eclipse and then tried to open localhost:8400/ReportGenTool, I got the 404 error : The requested source (/ReportGenTool/) is not available which according to the instructions is fine.
    Next I created a Flex Project, but when I try to validate the new Flex project configuration, it gives me an error "Cannot access the web server. The server may not be running, or the web root folder or root URL may be invalid."
    When I validated the server was running after setting up the BlazeDs Turnkey, I saw the BlazeDS page.
    Now when I bring up http://localhost:8400 I get:
          Directory Listing for /
          Apache Tomcat/6.0.14
    My eclipse project is named ReportGenTool and I've overwritten the WebContent directory with the META-INF and WEB-INF directories from the BlazeDS installation (C:\blazeds\tomcat\webapps\blazeds).  According to Eclipse the server is running.
    My Flex project is named ReportGenTool and is located in another directory away from the Eclipse project directory.
         My root folder is: C:\Projects\workspace\ReportGenTool\WebContent
         Root URL: is http://localhost:8400/ReportGenTool/
         Context root is: /ReportGenTool/
    Any idea what might be wrong? What didn't I configure that needs to be configured?
    Thanks in advance.

    This is not working because your router has a direct to your web server that is not through the outside interface which is needed for nat to occur, for this to work you need to setup a loopback interface as nat outside and policy route traffic to there for your server traffic
    Bu if your server is internal why do you need nat at all? Can you not use bind with views that might be simpler
    M
    Sent from Cisco Technical Support iPad App

  • How can I use the setup utility with my gaming adapter?

    How can I use this program (the cd that came with my netgear wireless game adapter) to setup my gaming adapter? I want to configure my gaming adapter but it seems like i cannot do so? How can I achieve this?

    Hi again,
    thought a bit about this...
    This thing looks to me like a special sort of wireless router with one ethernet port, which also is a bit old I guess.
    With nowadays wireless router, the configuration usually is made using a Web-Browser like Safari or Firefox and accessing the router through a built-in webpage.
    The IP adress of the router is also usually 192.168.0.1.
    Have a look inside the Netgear-Documentation, to see if this also possible here.
    Stefan

  • How do I display the web address with Adobe PDF Reader 10.1.1 & IE 9 x64?

    Until a week ago, I was using IE 9 32-bit version together with Adobe PDF Reader 10.1.1.   When I would try to open a PDF file from within the browser, it would and the Web Address would continue to display at the top of the window while browing the PDF document. I could then continue using IE 9 and move on to other pages and etc...
    Now, I have swtiched to using the IE 9 64-bit version. What happens now is that when I enter an address in the web browser and it's a direct link to a PDF file example: https://www.technicalindicatorindex.com/newsletter/bpdf/TII_Newsletter _1686a_10.11.11_7055475115.pdf ), it opens up with no problems, but I no longer see the IE 9 Web Address shown anywhere. So in essence, that page becomes a Adobe PDF program window and I loose my IE 9 access. I guess the PDF files are no longer displayed within the browser (althought I have it check ON).
    Am I missing something?

    I did write there, but no replies
    I guess that with Adobe Reader 10.1.1 running with IE 9.x in x64 bit mode, you cannot open the PDF within explorer, as it does it outside it as a separate Window?
    Correct?

  • How do I access the AF Portal with SCR331 reader in Mac OS 10.5.6

    I have searched every website known to man and I am unable to find a way to access the AF Portal using a CAC reader issued to me. It is an SCR331. It shows up just fine in Keychain Access and I am successful in adding a new identity for the website. But when I go to the website www.my.af.mil and hit the button to access using my CAC card, it says that I have hit the Cancel button.
    Any ideas?

    To All,
    I encountered the same problems you describe with the Air Force portal. Followed all recommendations to no avail. After lots of trial and error this is what I did in my setup and worked:
    1. close all open programs. Open keychain access, connect the reader, insert CAC, select CAC keychain by clicking on it once, you will see a list with 3 certificates and 3 private keys to the right.
    2. double click on the certificates and find the one that shows "Usage Digital Signature, Non-Repudiation" and Purpose #1 Smartcard Logon, Purpose #2 Email Protection, Purpose #3 Client Authentication". This is the right certificate for online CAC authentication.
    3. control-click the CAC certificate identified as the right one in step 2 and create an identity preference for each server addresses that the AF Portal has:
    https://www.my.af.mil/EAI_JUNCTION/eai/
    https://www.my.af.mil/EAI_JUNCTION/eai/auth
    https://www.my.af.mil
    I had to create an identity preference for each; for some reason if I don't use all three, login fails.
    If you also want to access the virtual MPF, also create an identity preference with the following server: https://w20.afpc.randolph.af.mil/afpcsecurenet20/
    Note that these server addresses are case-sensitive and you need to put the "/" just as I did above.
    4. verify the identity preferences were created by selecting the login keychain, you should see them in there.
    5. open safari and enter: https://www.my.af.mil in the safari address bar. Enter PIN number if requested. I have noticed that sometimes it will work flawlessly and sometimes the server will reject the certificate and ask you to select a different one. If I select the one that says DOD EMAIL CA-15 and hit enter (sometimes repeatedly) it will then work. Don't know why this happens but have read is a USAF server-side issue.
    Once you are able to access the portal, logout and try the vMPF by entering https://w20.afpc.randolph.af.mil/afpcsecurenet20/ in the Safari address bar
    hit OK if presented with a consent screen. You may be given a username/password screen, reenter https://w20.afpc.randolph.af.mil/afpcsecurenet20/ into the address and try again, you should be in AFPC secure.
    I tested this in a 2008 white macbook with an OmniKey 3121 USB reader and an Oberthur ID One v5.2 CAC card. My OS is 10.5.6.
    Please let me know if this helps.
    R Burgos

  • How can I access the address file with all contact info and print it?

    i'd like to be able to print out address info, phone no.s, etc but not do that one contact at a time so I'm looking for a file that might have all the contact info available in one place that I can access.

    Export your address book as a Comma Separated (csv) file and then open it in Excel. Then you can arrange the data any way you desire.
    Open the Address Book window and from the menu bar select Tools-Export.

  • How to conect an IP web cam with FME

    Hi
    I have an Axis 233D IP web cam conected via ethernet with a
    PC.
    I would like to stream the web cam with Flash media encoder.
    Is this possible?
    How do I attach the Web cam with the FME?
    If someone can help please do.
    Thanks

    Using the axis video capture I mannage to have the camera in
    the input but not in the output.
    I have seen axis webcams been streamed in flash. There must
    be a way.
    Thanks

  • I have an Ipad, I activated the time capsule with no issues. I added the airport Utility application without issue.  However, I do not know how to access the hard drive with either my Windows computer or the Ipad.  Does someone know how?

    I have an Ipad, I activated the time capsule with no issues. I added the airport Utility application without issue.  However, I do not know how to access the hard drive with either my Windows computer or the Ipad.  Does someone know how?

    On windows load the airport utility .. latest correct version as possible.. there is no windows 8 but win7 works after a fashion.
    Make sure the TC is using SMB compatible names.. short no spaces and pure alphanumeric.
    Type the name directly into windows explorer.
    \\TCname or \\TCIPaddress
    If no luck turn off all the firewalls.. internal windows plus security software plus whatever other gargyoles and other rubbish AV software you have running.
    Ensure windows is able to at least ping the TC by IP address and name..
    Use the utility in windows to set file sharing to guest account on with full read and write access.. and set workgroup to WORKGROUP.

  • I have a MacPro with two 1T hard drives. How do I access the hard drive that is not the start-up drive?

    I purchased a MacPro and upgraded to 2 1T hard drives.  How do I access the hard drive that is not the start-up drive?

    Have you formatted these new drives yet with Disk Utility?  That is the first step.
    Once they are formatted, if you want to see them on your desktop open the Finder preferences, General, and clock the checkbox that says "Show these items on the desktop" for the hard disks.  If that preference was already set you should see the drives appear after they are formatted.  Then they are there for you to use as you wish.

  • How to access the Web Service Browser

    Hi,
    I need to access the Web Service Browser to generate a Web Service Description.
    How can I do it?
    I use the follow url:
    http://<host_name>:<port_number>/sap/bc/bsp/sap/WebServiceBrowser/search.html?sap-client=<relevant_client>
    but I can't say how to determine values for the three placeholders.
    Help me please.
    THANKS

    Hi Andrea,
    you can access the web services in sap transaction SICF. Then right click on the
    service and choose "test". The hostname is the host on where the sap system
    runs.
    The port ´number can be seen in transaction SMICM -> shift + F1. Here you can see
    the portnumer assigned to the HTTP protocol.
    And the client is the sap client (standard client) for which the service is configured.
    Hope this helps.
    KR,
    Andreas

  • On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
    If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
    If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

  • How do I access the data saved on my time capsule?  for example, if i try to view my photos it tells me that i have 2.4gb of photos and gives me the option to "view with iPhoto"....but when i click on "view with iPhoto" nothing happens...  thanks!

    how do i access the data stored on my time capsule?  for example, if i try to view a photo, i get the option to "view with iphoto" but when i click on "view with iphoto" nothing happens.  i'm having similar trouble openning up movies, music, etc.  it appears as though the files exist / saved on the time capsule (because i can see how much storage they consume), but i can't open them.  thanks!

    Unfortunately, Apple removed the feature to "browse backups" in Time Machine backups of iPhoto a few years ago.
    You have to restore the entire iPhoto library to a separate location to be able to "see" it, and then choose the specific images that you want use.
    For complete details, see #15 in Pondini's excellent support document Time Machine -- FAQ.  Check the information in the pink box there.
    Frequently Asked Questions

  • Help with purchased music w/ old apple ID no longer in use... how do i access the music?

    i purchased music with an apple id i no longer use and no longer have the email address/or password -- had to shut email down years ago. how do i access the music in itunes that I purchased on my new computer with my current apple id (which I have also now had for some years)? thank you for any help.

    buddsct wrote:
    I can not acces that apple ID...
    Why not?
    -> https://iforgot.apple.com/appleid

  • HELP!  I subscribed to imatch on my mac so that I could access the songs anywhere with my iphone.  However since I live in a rural community I would like to make playlists that always stay on my phone in case I don't have service.  Not sure how.

    HELP!  I subscribed to imatch on my mac so that I could access the songs anywhere with my iphone.  However since I live in a rural community I would like to make playlists that always stay on my phone in case I don't have service.  Not sure how.

    I have the same issue.  While I am sure your solution would work, my playlist has over 6,000 songs and hiting every song to download it is not very practical.  Is there another way?
    I am looking to have a subset of my music physically on my phone so that I can play it without internet access, but have access to the entire library when I do have internet access. 

Maybe you are looking for