How do I adjust the tempo of a drum track inserted in Audition multitrack session?

(Note: for the Audition 101 user)  In a multitrack Audition session, what is the best way to adjust the tempo of an inserted drum track to sync up with the already metronome-established tempo of recorded rhythm tracks (guitars & vocals)?

Time Stretch the clip. Either by trial and error or, if you know the tempo of the inserted track, by calculation.

Similar Messages

  • How do you change the tempo of a drum loop?

    Forgive my ignorance but I am still familiarizing myself with all the features of the program. How do you change the tempo of a drum loop? I see in the help file where it tells you how to change the projects overall tempo but not where to change the drum tempo itself. Thanks.

    Nevermind I found it, thanks.

  • How can I change the tempo of a drum loop?

    Ok so I have the rhythm pack and lot's of drum loops. They are all insanely fast. It's hilarious, I can't find a single loop with just a constant hi hat tap suitable for the beginning of a slow rock song.
    More importantly, there doesn't seem to be a way to adjust the tempo of just the drum loops. It seems like it should be an easy thing but I've tried everything and looked all over google.
    Please, if there's a work around to slowing down these 2000+ super fast drum loops, help!
    Thanks

    The drum loops should adjust to the tempo of your song, also in the preview. So if you set your song to a crazy fast tempo, all loops will play very fast!

  • How do i sync the tempos for two different tracks playing at the same time?

    i am new to audition so i apologize if there is an easy answer to this question, but...
    i upload two different two different songs and i want to get them to play at the same time and sound halfway decent. how do i get the tempos to match?

    http://www.adobeforums.com/webx/.2cccd873/0

  • How can I change the tempo of an imported track in GarageBand 10.0.1?

    Hi - I am trying to change the tempo of an imported track in GarageBand. I am very new to this and need basic help! My son was able to change the tempo on his older version of GarageBand but we can't seem to do it on my version 10.0.1. Thanks.

    Woolsey5 wrote:
    I am trying to change the tempo of an imported track in GarageBand [...] version 10.0.1.
    http://www.bulletsandbones.com/GB/GBFAQ.html#changeimporttempogbv10
    This FAQ entry offers a Minute GarageBand video tutorial
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • How do I adjust the tempo or BPM of a sample to match the song I'm working on?

    Hi, the title pretty much says it all.
    I am working on a tune in audition CS6, however I am aware that audition is not intended for music production, but I already have the beat, bass line and melody laid down in a multi-track session, now I have download a few audio samples and acapellas that I want to use on my tune but do not know how to go about matching the tempo so that my audio sample fits like a glove over my original tune.
    Please help.

    There are two things you need to know, really. The first is that when you import a clip into multitrack view, by default stretching is off. But if you grab the little triangle at either the top left or top right of a clip, you can stretch it anyway - this turns stretching for the clip on automatically. To get things right initially, you need to position the clip at the correct start point, and stretch or shrink the end point so that it finishes where you want it to. The second thing is that the 'slip' tool is sometimes useful here as well. This leaves your clip window exactly where it is, and lets you slide the clip around within it, so you can, if you want, 'push' the beat with your clip - or of course the complete opposite.
    By default, clip stretching is in real time, but the chances are that when you've got it in the right place you'll want to improve the quality. So  you right-click on your clip, select the stretching options and set it to render it, rather than run in real-time mode. This takes longer, but sounds miles better.
    Once you get used to it, these operations are pretty easy to carry out.

  • How can I change the tempo of a single track?

    Hi,
    I've been struggling with finding a way to change the BPM of a single track. There are three tracks and only one of them needs to be sped up. When I try using the flex editor, it is too complicated for what I am trying to do. Is there any more comprehensive way - a slider, or an input option - for changing the BPM of a single track in the newest version of garageband?

    The reason some files sound funny and others don't is because audio is handled a few different in Garageband depending on it's source (audio your recorded vs Apple Loops vs non Apple Loop pre recorded audio). Each of these have different color regions with different properties.  I just found this thread that might better explain it:
    http://hintsforums.macworld.com/archive/index.php/t-67538.html
    I hope that helps!

  • How To Change the Tempo of Just One Track?

    I want to change the tempo of just one track of a song, but when I change the tempo of one track, the tempo of the whole song changes and gets messed up. Does anyone know how to just change the tempo of just one track of the whole song.

    You can not change the tempo of a single track, in GB it's one tempo per song.
    The only workaround would be to change the tempo, export only that track (soloed), and then drop the export back into your project (with it set back to the proper tempo)

  • How to adjust the tempo of a project by mouse tools in globe track

    I remember I once saw a movie on Apple official web showing how to use the mouse tool to "draw" the tempo in the globe track to catch the tempo of a live recorded project .
    It seemed that it's very simple in the movie , but not by using the" adjust the tempo by using the region length and locators" .I remember the guy in the movie just draw some line in somewhere in the globe track and the tempo will change automatic and correctly to catch the percussion audio track ....
    But I cannot remember the detail now.. somebody here watched this movie before ?
    I try to make it , but I failed all the time ....
    Thanks!

    Look for "Beatmapping" in the manual

  • I need to adjust the tempo of a commercial song imported from iTunes

    I need to reduce the tempo of a commercial song which I imported to GB from iTunes by ~6%. Can I do this in GB, and if so, how?

    If you need a precise value, I suggest using an audio editor (e.g. Audacity, which is free) to achieve this - you can add numerical values there. If you use GB, you can only adjust the tempo in integer steps, and the percentage value depends on the tempo you start with.
    What you could do in GB is the following:
    • set the song's tempo to 100
    • import your audio file
    • turn the orange region into a purple one and check "follow tempo & pitch"
    • set the song's tempo to 94.

  • How can I change the tempo (and the snap grid) of the project without altering the duration of the original audio clips?

    This question is for Logic Express.
    I have many very short audio clips that I recorded into my project.
    I want to adjust the project tempo so that I can use the snap grid to make a beat out of my short audio clips. But when I change the project tempo, it automatically adjusts the lengths of my audio clips.
    So how can I change the tempo (and the snap grid) of the project without altering the original audio clips?

    The reason some files sound funny and others don't is because audio is handled a few different in Garageband depending on it's source (audio your recorded vs Apple Loops vs non Apple Loop pre recorded audio). Each of these have different color regions with different properties.  I just found this thread that might better explain it:
    http://hintsforums.macworld.com/archive/index.php/t-67538.html
    I hope that helps!

  • Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help.   Is th

    Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help.
    Is there another way to adjust tempo of loops the faster way, any other technique?

    No clue why the final processes have suddenly started to take so long. Two things I'd try: a) capture from an older tape to see if some problem with the new tape is at fault.  And b) check the health of your RAM and the hard drive.
    The red frame sounds a bit like a glitch we used to have in OnLocation (actually in its predecessor HDV Rack) which was caused by a partial GOP. But that was a product of HDV Rack recording from the live video stream. It turned out that HDV cameras intentionally interrupt the data stream for an instant upon starting to record--specifically to avoid recording a partial GOP to tape. So my gut says that the tape has partial GOPs at the points where you stopped/started recording.

  • How can I adjust the font size of my printouts?

    I have an HP Officejet 4500 all-in-one printer and a new HP pavilion Slimline computer.  Since I changed to this computer, my printouts have very small font size making them hard to read.  How can I adjust the font size of the printout?  Is it a computer or printer function? I appreciate the help.

    I, too, am frustrated.  This seems like something that would easily be handled within the application software.  However, none of the fixes I've been offered have been very helpful.  My cousin sugested using Control C and Control V to move the text to WORD.  Once in WORD, you can manipulate the text on a WORD page...sometimes.  I've had good and bad luck with this method.  It still requires working in two different programs to get it legible.  Does anyone else have a 4500  All-in -one with this problem, or is it only me?  Thanks,  [Edited for Personal Information]

  • How do I adjust the print size of a photo?

    I created a collage in PSE 10 and took the photo to Ritz to have printed out in an 18" x 24" poster.  When the file was read into their computer for printing, the sizing came up as 18'1/2" x 24".  Printing the photo as is will cut 1/2" off of the collage.  How do I adjust the print parameters of my photo file in PSE 10 to be exacetly 18" x 24"?  Thanks.

    Here is my suggestion:
    Open a blank, new file (File>new>blank file) size 8.5x11"
    Open the collage
    Go to Select>all
    Go to Edit>copy
    Go back to the blank file created in step #1
    Go to Edit>paste. The collage will be on its own layer
    Access the move tool, and with the corner handles resize the collage. Using the corner handles should preserve the aspect ratio. If you open the rulers, you will have a point of reference as you go along.
    Print a draft copy to see if it will be suitable in the frame..
    Please report back with your progress.

  • How can I adjust the font size in iTunes 11?

    How can I adjust the font size in iTunes 11?  Specifically, when in Artist view both the text in the sidebar and the track listing are huge.

    How to change fontsize in iTunes
    Take an XML-Editor and open:
    "C:\Program Files (x86)\iTunes\iTunes.Resources\de.lproj\TextStyles.plist"
    For other languages change your country code (de, en, fr, pl ...).
    Example for english:  "\en.lproj\TextStyles.plist".
    Backup this File !!!
    To change the Text-Size, change the integer value of the following item:
    "<key>size</key>"
    "<integer>8</integer>"
    This means Text-Size 8
    "<key>size</key>"
    "<integer>12</integer>"
    This means Text-Size 12
    To change the font, change the integer value of the following item:
    <key>font</key>
    <string>Arial</string>
    This means the font changes to Arial
    This also works:
    <key>italic</key>
    <true/>
    <key>bold</key>
    <true/>
    <key>underline</key>
    <true/>
    Example of common Text Properties:
    <!-- Artist View, Text Size In Artist List , Unselected -->
      <key>1033</key>
      <dict>
            <key>- loc hint -</key>
            <string>item table cell 3</string>
            <key>bold</key>
            <true/>
            <key>font</key>
            <string>Segoe UI</string>
            <key>size</key>
            <integer>8</integer>
        </dict>
      <!-- Artist View, Text Size In Artist List, Selected -->
      <key>1034</key>
      <dict>
            <key>- loc hint -</key>
            <string>item table cell 3 (bold)</string>
            <key>bold</key>
            <true/>
            <key>font</key>
            <string>Segoe UI</string>
            <key>size</key>
            <integer>8</integer>
        </dict>
    <!-- Album View Text Size, Titles Of Track List, After Click On Album -->
        <key>1021</key>
        <dict>
            <key>- loc hint -</key>
            <string>item track list 1</string>
            <key>font</key>
            <string>Segoe UI Semibold</string>
            <key>size</key>
            <integer>8</integer>
        </dict>
      <!-- Artist View Text Size, Titels Of Track List -->
        <key>1022</key>
        <dict>
            <key>- loc hint -</key>
            <string>item track list 2</string>
            <key>font</key>
            <string>Segoe UI</string>
            <key>justification</key>
            <string>right</string>
            <key>size</key>
            <integer>8</integer>
        </dict>
      <!-- Track Number Size, In Album And Artist View -->
        <key>1023</key>
        <dict>
            <key>- loc hint -</key>
            <string>item track list 3</string>
            <key>font</key>
            <string>Segoe UI</string>
            <key>justification</key>
            <string>right</string>
            <key>size</key>
            <integer>9</integer>
        </dict>
      <!-- Artist Text Size, In Album And Artist View -->
        <key>1024</key>
        <dict>
            <key>- loc hint -</key>
            <string>item track list 4</string>
            <key>font</key>
            <string>Segoe UI</string>
            <key>size</key>
            <integer>9</integer>
        </dict>
    <!-- Album View Text Size, Title Of Album Under The Cover -->
        <key>1001</key>
        <dict>
            <key>- loc hint -</key>
            <string>item grid 1</string>
            <key>bold</key>
            <true/>
            <key>font</key>
            <string>Segoe UI</string>
            <key>size</key>
            <integer>8</integer>
        </dict>
      <!-- Album View Text Size, Artist Under The Cover -->
        <key>1002</key>
        <dict>
            <key>- loc hint -</key>
            <string>item grid 2</string>
            <key>font</key>
            <string>Segoe UI</string>
            <key>size</key>
            <integer>8</integer>
        </dict>
    <!-- Titleview Textsize In Table -->
        <key>9002</key>
        <dict>
            <key>- loc hint -</key>
            <string>List Contents (Small)</string>
            <key>font</key>
            <string>Segoe UI</string>
            <key>size</key>
            <integer>8</integer>
        </dict>
    <!-- Title View Text Size, Title Of Album Next To Cover -->
        <key>9029</key>
        <dict>
            <key>- loc hint -</key>
            <string>List Contents (Small Bold)</string>
            <key>bold</key>
            <true/>
            <key>font</key>
            <string>Segoe UI</string>
            <key>size</key>
            <integer>5</integer>
        </dict>
    <!-- Textsize Playlist Sidebar Left Selected -->
        <key>1307</key>
        <dict>
            <key>- loc hint -</key>
            <string>playlists outline small font (selected)</string>
            <key>bold</key>
            <true/>
            <key>font</key>
            <string>Segoe UI</string>
            <key>size</key>
            <integer>3</integer>
        </dict>
    <!-- Textsize Playlist Sidebar Left Unselected -->
        <key>1304</key>
        <dict>
            <key>- loc hint -</key>
            <string>playlists outline small font</string>
            <key>bold</key>
            <true/>
            <key>font</key>
            <string>Segoe UI</string>
            <key>size</key>
            <integer>7</integer>
        </dict>
    Hope this helps.

Maybe you are looking for

  • Less than or Equal to Variable on Calquarter is not working in Webi

    Hi Guru, I have Variable on Calquarter which brings the query result for all the cal quarters which are LESS THAN or EQUAL to entered one. But, when we execute the Webi Report of this Bex Query, we get data for all the Calquarters in the infoprovider

  • My emails from the same person are grouped together, how do I undo this so that each email stands on it's own?

    1.My emails from the same person are grouped together, how do I undo this so that each email stands on it's own? 2.Currently my emails are grouped together if the subject is the same, how do I undo this? 3.My emails are "folded up", with tabs like "S

  • Strange problem with audio (link inside)

    Hello Community, please help me! So I started this project where I film everything I do in the year 2014 and stuff. Well, this week I began with doing the work in AE, so far so good. I'm not finished yet, but I just wanted to try to render and upload

  • Excel as a datasource

    I have a Crystal report (currently it is Crystal 9 but we are migrating to XI R2) that uses an Excel file as the datasource.    It uses the Microsoft Jet OLEDB driver 4.0 and Excel 8 as the database type.   I am pointing to a shared drive (letter g)

  • How to create tab pane in jsf

    i have two pages file.jsp file1.jsp i want to open these page in diff tab. both pages contains ajax tags how i will do this.