How do I apply perspective to type in Illustrator CS6?

I want my type to resemble a building, how do I figure this out?Also i have a thumbnail box which I'm putting my box in, how do
I cut off the type from the outside of the box.

I have used this technique on type and when I expand the appearance, a lot of lines appear (it is no longer smooth). I need this to look good on screen and for print. Any suggestions on avoiding or fixing this problem?
Thanks!
Lani

Similar Messages

  • How do you apply 2 different types of page numbers in the same document?

    How do one apply 2 different types of page numbers in the same document??? I do not want a number on the first page!

    Click in the second section text:
    Inspector > Layout > Section > Configuration > uncheck Use previous headers and footers
    Then go back and simply delete what's in the header/footer of the first section.
    Peter

  • How to solve the problem when opening program illustrator cs6 ERROR: 16 It is WINDOWS 8.1 / 64 BIT help please

    how to solve the problem when opening program illustrator cs6
    ERROR: 16
    It is WINDOWS 8.1 / 64 BIT
    help please

    Thanks, Jeff! The file Adobe Setup Error.log contains the following information:
    02/14/14 07:20:26:474 | [INFO] |  | OOBE | DE |  |  |  | 8860 | DEVersion: 5.0.0.0
    02/14/14 07:20:26:475 | [INFO] |  | OOBE | DE |  |  |  | 8860 | Loading library from C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE5\Setup.dll
    [    8860] Fri Feb 14 07:20:26 2014  INFO
    ::START TIMER:: [Total Timer]
    CHECK: Single instance running
    CHECK : Credentials
    Load Deployment File
    CHECK : Another Native OS installer already running
    Create Required Folders
    Assuming uninstall mode
    Lookup for master payload
    [    8860] Fri Feb 14 07:20:26 2014 ERROR
    DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
    [    8860] Fri Feb 14 07:20:26 2014  INFO
    :: END TIMER :: [Total Timer] took 6.90443 milliseconds (0.00690443 seconds) DTR = 579.338 KBPS (0.56576 MBPS)
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 1 error(s), 0 warning(s)
    ERROR: DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
    Please search the above error/warning string(s) to find when the error occurred.
    These errors resulted in installer Exit Code mentioned below.
    Exit Code: 33 - The product is not installed, cannot uninstall.
    Please see specific errors and warnings for troubleshooting. For example, ERROR: DW040 ...

  • How can I can write Arabic in Adobe Illustrator CS6 ?

    How can I can write Arabic in Adobe Illustrator CS ?
    I use Adobe® Creative Suite® 6 Design & Web Premi
    And I write Arabic in Adobe photshop CS6 but I can't write in  Illustrator and  indesign
    PLZ help me .

    Hi,
    In Photoshop, Middle-east/North-african type (MENA) is enabled in all editions. In Illustrator and InDesign, you need the MENA-enabled editions of the software. Please use these links to download the trial and explore Arabic language support in Illustrator:
    Illustrator: http://www.adobe.com/mena_ar/downloads/download-illustrator.html
    Cheers,
    David

  • How do I install Cutting Master 3 to Illustrator CS6?

    How do I install Cutting Master 3 (plug in) into Illustrator CS6?
    I have tried and it is not working. 

    Hi Di in CS,
    You can install any commercial plug-in designed for use with Illustrator.
    To install an Adobe Systems plug-in module, use the installer if one is provided. Otherwise, drag a copy of the module to the Plug-ins folder inside the Illustrator folder. Then restart Illustrator for the plug-in to take effect.
    To install a third-party plug-in module, follow the installation instructions that came with the plug-in module.
    Hope this helps.
    Regards,
    Sumit Singh

  • How to enable middle eastern language support in Illustrator cs6?

    how to enable illustrator cs6 to support middle east? 
    i have enable this option on photoshop cs6 and in InDesign cs6
    but not in illustrator cs6,
    please help
    (i download the master collection cs6 trial version)

    I know in In Design you can have a template file set up with a right to left text box which can be copied into any version of In Design and used for Arabic text.
    If you can get hold of an Illustrator file set up in the ME version this may work too.
    I only rarely typeset Arabic in small quantitys so this is a good workaround for me.
    All the download links are now broken by the way Ivan =)
    Nick
    There are plugins available also for non ME versions which will help you if your budget won't stretch to another full adobe release;
    Multi language text input and editing, ScribeDOOR for Adobe Illustrator CS5.1 and CS6;
    http://www.winsoft-international.com/en/downloads/print-free-downloads.html
    World Tools from in-tools.com provides the same functionality for In Design;
    http://www.in-tools.com/products/plugins/world-tools/
    Message was edited by: nickrhodes

  • How do you apply 2 different types of page (first with large logo and 2nd/follow with small) in the same document?

    i´m using pages 5.1 and i need 2 different types of page in 1 document: first page with large logo and second with a small one. in pages 09 was a option for different first page ...

    that's not my problem, and I am unfortunately not a professional. Sorry.
    In Pages09 there was an option "Different First Page" (like MS Word). I could create different pages (first and second) with two different logos and text boxes. If the document was opened, there was only one side with the large logo. during writing the small logo and the other text boxes appeared on the second page (and subsequent pages).
    Unfortunately I miss this function. I mean the inclusion of items on a second page. However, this must not necessarily be active.

  • How do you create a bulleted list in Illustrator CS6?

    I want the bullet to remain with the text like it would in a MS Word bulleted list.
    Thanks!

    As mentioned Illustrator does not have a style of bulletted list. Thanks to some great typographical control you can create this using firs line indent (I set mine to -4.5 pt for this typeface & point size). This will give you hanging bullets, though if you change your type, that -4.5 would have to change.

  • How do you connect two line segments in illustrator cs6?

    I have been using adobe cs5 for a few years.  If I wanted to connect the corners of two line segments, you would select the first line segment with the select tool, then switch to the direct selection tool, and drag the anchor point to the other line segment anchor point till the cursor arrow went white (signifying the other anchor point being recognized).  Then you would choose "join" and it would give a nice right angle connecting the two line segments. 
    With adobe cs6, the direct selection tool doesn't change to white when you go over the other line segment anchor point.  Why is this? 
    (Unfortunately my screen capture doesn't show the black arrowhead that you see when you are dragging with the direct selection tool to the other line segment.)
    I have also attached a youtube video link that shows what how this recognition of anchor points looks in adobe illustrator cs5, and this was exactly what I used to do when I was performing the task shown in my screen capture but with adobe illustrator cs5.  Thanks and sorry for the essay!
    https://www.youtube.com/watch?v=InwcicWQHL0
    Anybody have any idea how to remedy the lack of anchor point recognition?

    You are welcome, zinders.
    Just a comment: you seem to use Butt Cap, so you can really see when line segments are not joined.

  • How to delete user defined swatches in adobe illustrator CS6?

    I'm trying to delete swatches that have been saved as User Defined but i'm unable to locate the local file to do it.
    Any help would be greatly appreciated.

    It's in your user folder, inside App Data
    Where Can I Find Application Data folders in Windows 7? - Microsoft Community

  • How can I convert shapes to Grayscale in Illustrator CS6?

    The question is pretty much in the title, haha!
    Thanks!

    Select objects, then:
    Edit > Edit Colors > Convert to Grayscale

  • How do I move a whole layer in Illustrator CS6?

    I've got a project where the same set of paths, all on a same layer, repeat multiple times, forming a sort of spline. Is there any way to select a whole layer, and only that layer, then move it about the canvas?

    In the Layers panel click on the right side of the layer you want to select like this and all the objects on that layer will be selected. Then move as needed. Make sure it is a large stroked square not a small unstroked one.

  • Distressed Type in Illustrator

    Hi guys, I'm pretty new to Illustrator and I'm having problems creating distressed type in Illustrator CS6. I cam across a tutorial that showed me how to do it with the "glass" effect but I did not really like the result. I also came across a video on the layers magazine site (http://layersmagazine.com/distressedtype.html) which does exactly what I want but I can't seem to follow it correctly (maybe because they refer to an older CS version). Any help on the steps involved would be greatly appreciated.
    Thanks
    MK

    I'll try -
    Basically from the tutorial I see that you take a grunge background, create some black text, use a black and white live trace on the image so it turns monochrome, click expand so it turns into objects and then delete the white shapes. Then you put the background over the text, send it to the back with arrange > send to back and then select everything and use "minus back". The black text then has the background texture on the actual text (eg scratches in but not around it) as if the shape has become part of the text and it can be placed against any background colour/texture.

  • When I try to download update, I save the file as directed. However, the update is not applied. How do I apply the update for Firefox?

    I am being prompted to download the update to a new version of Firefox. When I click on download, I receive a window to save the file. I save the file instead of canceling. After the download has been saved, my version of Firefox still has not been update. How do I apply the update?

    Thanks Alex, but sadly I already tried that. Neither .docx or .xlsx files show up in the content list. They both show as a Chrome HTML document so changing how Firefox addresses those doesn't help since it thinks its the same type of file. I don't think I can manually add files into the "Content Type" left side nav.

  • How can i  apply this  java program for  a jsp page?

    import java.io.*;
    import java.util.*;
    public class FileProcessing
      //create a vector container  for the input variables
         Vector variables = new Vector();
      //create a vector container for the constants
         Vector constants = new Vector();
      /*create a string expression container for the equation
         as read from the file */
         String expression = " ";
      //create double result container for the final result
         double result = 0;
         public boolean processFile(String filename,String delim)
          //index for values vector
              int num_values = 0;
          //index for constants vector
              int num_constants = 0;
          //current line being read from the external file.
              String curline = " ";
          //start reading from the external file
              try
                   FileReader fr = new FileReader(filename);
                   BufferedReader br = new BufferedReader(fr);
                   while(true)
                        curline = br.readLine();
                        if(curline == null)
                             break;
                    //determine the type of current interaction
                        boolean variable = curline.startsWith("input");
                        boolean constant = curline.startsWith("constant");
                        boolean equation = curline.startsWith("equation");
                        boolean output = curline.startsWith("result");
                   //on input variables
                        if(variable)
                          StringTokenizer st = new StringTokenizer(curline,delim);
                          int num = st.countTokens();
                          int count=0;
                          while(st.hasMoreTokens())
                               String temp = st.nextToken();
                               if(count==1)
                                    byte b[]= new byte[100];
                                    System.out.println(temp);
                                    System.in.read(b);
                                    String inputval = (new String(b)).trim();
                                    variables.add(num_values,inputval);
                                    num_values++;
                               count++;
                        // on constant values
                        if(constant)
                             StringTokenizer st = new StringTokenizer(curline,delim);
                             int num = st.countTokens();
                             int count = 0;
                             while(st.hasMoreTokens())
                                  String temp = st.nextToken();
                                  if(count==1)
                                       byte b[]= new byte[100];
                                       System.out.println(temp);
                                       System.in.read(b);
                                       String cons = (new String(b)).trim();
                                       constants.add(num_constants,cons);
                                       num_constants++;
                                  count++;
                        // on equation
                        if(equation)
                             StringTokenizer st = new StringTokenizer(curline,delim);
                             int num = st.countTokens();
                             int count = 0;
                             while(st.hasMoreTokens())
                                  String temp = st.nextToken();
                                  if(count==2)
                                       this.expression = temp;
                                  count++;
              // now we are ready to evaluate the expression
                       if(output)
                          org.nfunk.jep.JEP  myparser= new org.nfunk.jep.JEP();
                          myparser.setAllowAssignment(true);
                          for(int i=1;i<variables.size()+1;i++)
                             String name = "arg"+Integer.toString(i);
                             myparser.addVariable(name,new Double(variables.get(i-1)
                                                .toString()).doubleValue());
                          for(int i=1;i<constants.size()+1;i++)
                               String name = "arg" +Integer.
                                         toString(i+variables.size());
                               myparser.addConstant(name,new Double(constants.get(i-1).toString()));
                   //output is obtained as follows
                          myparser.parseExpression(expression);
                          result = myparser.getValue();
                          System.out.println("Assay value: "+result);
              catch(Exception e)
                   System.out.println(e.toString());
              return true;
         public static void main(String[] args)
              FileProcessing fp = new FileProcessing();
              fp.processFile("input.eqn",":");
    }//my text file name is: "input.eqn" (given below)
    input:Enter Value1:arg1
    input:Enter Value2:arg2
    input:Enter Value3:arg3
    constant:arg4
    constant:arg5
    Equation:arg1+arg2+arg3
    result:

    how can i apply this java program for a jsp pagewhy do you want to do this ?
    Your program reads from a file on the disk and formats based on a patterm.
    Jsp is not intended for such stuff.
    ram.

Maybe you are looking for