How do I Audit Remote Control?

A requirement of us implementing SCCM Remote Control, is that were able to report on what/when technicians are connecting to client systems. Upon investigating the canned reports in SCCM, I've found 3 reports that do some of this, specifically
the 3 under "Status Messages - Audit";
- All audit messages for a specific user
- Remote Control - All computers remote controlled by a specific user
- Remote Control - All remote control information
1) Is there any more reports that may be useful? If so please specify.
2) These reports also seem to be missing some information about connections that I made during testing. How does this auditing/report process work? and how would I troubleshoot whether the auditing was working correctly?
3) Is it possible to audit/report on connections made from the standalone Remote Control Viewer tool?
Thanks,
Bill

I've used those those reports and haven't noticed missing information. I don't keep track of every session...
Perhaps were you using the remote control viewer utility directly instead of using the Admin console?
As for question 3, it is normal. If you launch the remote viewer executable directly (not from the admin console), those sessions are not auditable. There are many threads about this... here's one:
https://social.technet.microsoft.com/Forums/en-US/10aadbda-6a9c-4ee8-bcd8-a289d3a08385/methods-to-start-remote-control-other-than-sccm-console?forum=configmanagergeneral

Similar Messages

  • How to "remove" a remote control?

    How can I make my MB forget a remote control for good?
    Thank you very much!
    Peter

    Ok ok let's be civil here.
    What I suspect you will have to do is pair the remote to the Mac first, preferably in a second room.
    Then on the ATV complete the pairing process. If there is already a remote paired then if I recall correctly it should allow you through the menu to unpair it.  Hopefully while pairing the 2nd remote to the TV the Mac will not see it.  It may even be better to have the Mac completely off while pairing to the ATV so there is no way it can see the signal.
    That's my best guess. I am running 10.8 and the options on the computer end seem to be removed. I don't think Apple is even including remotes with new desktops anymore.
    I wish you the best of luck. Getting the remotes paired is a big PITA that I went through once. I think I finally gave up.

  • Ipod Hi-Fi A1121 how to run without remote control

    Hello. I have A1121 ipod hi-fi speakers but i lost the remote control, how can i run that without remote controllers?

    The new admin solution did not work for me.
    I just got a remote today and tried to get it working but no joy. I'm having the same problem in that the 'setting' for infared receiver in security preferences is just not there?
    also in my USB settings/profile there is no mention of infared.
    anyone got any ideas? is it a bug with the software updates?

  • How to use the remote control in MediaSource Audio Play

    Hello,
    I bought myself the Creative X-Fi Elite Pro.
    I found out that I only can use the remote control in Media Center of the software.
    Now I want to use it in the Creative Audio Player whicht was also in the Box.
    Is there a way?

    Yes there is. I suggest trolling these boards for the 3rd party remote solutions that will free you to use the remote in ANY application like Winamp, Notepad, Windows Media Player, etc.
    Just my two opinionated cents...

  • I don't know how to USE my remote control on my AUDIGY 2 ZS Platinum

    I followed the instructions on this page: http://support.creative.com/kb/showa....aspx?sid=2965
    about activating my remote control for my AUDIGY 2 ZS Platinum but mediasource did not have a remote control option tab as you can see here...
    Untitled.jpg
    I just changed the battery on my remote and the receiver blinks when I press a button on the remote but nothing happen no volume change or nothing.
    Don't know what else I should do.

    You can import the contacts from SIM.
    It is covered in the manual:
    iPhone User Guide (For iOS 4.2 and 4.3 Software)

  • Just bought Apple TV today, have one problem, how to have the remote control the TV alone, not my mac pro ...

    just bought the Apple TV today, connected with my Pioneer Elite receiver, works great with my iPhone 5, HD movie steam without any problem. but when i open my MBP, problem start surface, i try to do the home sharing, but the remote control not only control my apple tv, but control my MBP as well, so it mess up everything. please help also the Apple TV keep on resume playing music or video without permission, for example, i was trying to watch a photo slideshow, but it keeping switch back to playing the video files i last watched. any ideas?

    As for the remote issue, what version of OS X are you using?
    With the latest version of Mountain Lion 10.8.2 you will find the remote control setting in Preferences/Sharing/Privacy then click the Advanced button at the bottom. Check "Disable remote control infrared receiver" or pair a different Apple remote to prevent the ATV's remote from controlling the computer.

  • How to turn off remote control on mac 10.8.4

    I need to turn off remote access? Where do I do this ?

    What remote access are you using?
    http://support.apple.com/kb/ht2577

  • Lenovo AIO C440 - not working infrared remote control

    Hello,
    is there any hint how to get infrared remote control working for a new C440 model? Tomorrow I will try to measure and/or replace batteries which could be bad. For now it is totally not working.
    Another question: the remote should work only within AverMedia TV app or in the whole Windows 8?
    Regards,
    Zdenek

    hi bohdik,
    Welcome to the Lenovo Forums.
    The IR Windows Media Center remote control is for use with C440 models with optional TV tuner. If you have this model,  make sure the TV Tuner driver and the ITE CIR Driver from the lenovo support site are installed under Device Manager (press Windows Key+R then type devmgmt.msc) then follow  the Set up a TV signal in Windows Media Center. guide.
    Note:
    You must have Windows 8 PRO to enable Windows Media Center
    See this articles in reference:
    How to add Windows Media Center to Windows 8 Pro
    How To Install And Set Up Media Center On Windows 8
    Hope this helps
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • How to unable my MacBook Pro from recognizing apple tv remote control

    When changing menues in my apple tv, the MacBook Pro recognizes and automatically activates front row.
    Don't want my MacBook Pro to recognize this remote control. How can I do this?
    Thanks

    I would suggest posting your question in either an Apple TV or Macbook Pro forum, this is an iMac forum.

  • HT4352 How can I get Home Sharing turned on my Apple TV if I have lost my remote control and my remote apps on my ipad and iphone can not get access to my apple tv, only my itunes.

    How can I get Home Sharing turned on my Apple TV if I have lost my remote control and my remote apps on my ipad and iphone can not get access to my apple tv, only my itunes.

    You can't, you will need to get a new remote.

  • A lost my remote control for apple tv. I want to use my phone as a remote but the applications can' pair with the Apple TV device , how can I pair them without remote?

    A lost my remote control for apple tv. I want to use my phone as a remote but the applications can' pair with the Apple TV device , how can I pair them without remote?

    Setup for remote app: http://support.apple.com/kb/ht1947
    Specifically:
    Set up Apple TV (2nd and 3rd generation)
    On Apple TV, select Settings from the main menu.
    Select General > Remotes > Remote App. If Home Sharing isn't set up on your Apple TV, you should turn it on.
    Apple TV (2nd and 3rd generation) uses Home Sharing to stream content from your iTunes library on your computer to your HDTV.  If  you connect your Apple TV to your iTunes library using  Home  Sharing, you can use Remote to browse and play content from any  iTunes library in the Computers   section of your Apple TV. You can also  use Remote to select  between available speakers to enhance  your  audio and video experience.

  • How to prevent others use their iDevices to remote control apple tv?

    Hi All,
    I'm wondering that does anyone know how to prevent others use their iDevices to remote control my apple tv?
    settings
    1. the apple tv is in the school.
    2. all students could access the Internet
    3. The apple tv is sharing the same Internet with students.

    Welcome to the Apple Community.
    The remote app uses homesharing, therefore anyone wanting to control an Apple TV with the remote app would need to know the home sharing ID and password.

  • How can I remote control my iPad 2 with my iPhone.....apart from limited 2screens?

    Is there an app yet or in development which means I can remotely control some aspects of my iPad 2 with my iPhone.....I have used 2screens but am hoping for a more universal app......thanks
    Stephen

    Actually, if you Don't know how to do, you could go to
    http://charlie-roberts.com/Control/ (the web site of the creator of your app.)

  • Creative Megaworks 250D 2.1 THX: How can I find a new remote control & spare satellite(s)?

    Hi all,
    For years, we have owned and used one remarkable speaker set from Creative:
    The Creative Megaworks (Cambridge Soundworks) 250D 2.1 THX-certified speakers!
    I have no complaints. The sound this small 2.1 set produces is amazing! The 300 watts (RMS) power can shake the whole house - x50W + 2x75W are more than enough! Movies, music, games, everything sounds great - bass is deep and clear, mid-range is good, high frequences are clear! There's no noise and no distortion (I have connected the system to an SPDIF digital connector on my sound card), the Signal-to-Noise ratio is 99 dB, and the frequency response of the set is extremely good, too!
    But I have a problem, now. We have broken, by accident, one of the satellites. Now I have only one satellite, and the bass/amplifier with the remote control... Looks like a . system... ;-)
    This system was a present for us. Maybe we were lucky, but I am very happy with the build quality of this Creative spaker set. Until we have broken one of the satellites ourselves, yesterday, everything was OK, and the sound it produced was amazing all these years...
    I tried to contact a Creative representative, asking if we can maybe order one (or two) spare satellites fot this set, but the only reply (up to now) was:
    "You are out of warranty period. Buy a new speaker set."
    Well, we could, I guess...
    But:
    First: Creative does not have (at present) a similar model, 2.1, THX certified, with digital (SPDIF input), 300W+ RMS, 99 dB Signal-to-Noise.
    Second, to throw away such an amazing set just because there's one satellite broken? That would be such pity! :-(
    I'd like to buy one (or two) new 250D satellites. I was thinking even that, in the worst case, I can maybe try to order 2 satellites from a Creative Gigaworks S750 set. They have very similar characteristics, 70W rms power, 8 ohms, so maybe this'll work. I was trying to check today if two satellites can be ordered, but with no luck up to now... :-(
    Does anyone have any similar experience? What do you do if you accidentally have broken up one satellite from a 2./5./7. expensi've speaker set? Should you throw away the whole set? Try to find similar satellites?
    I hope Creative support will help, but I don't have much hope, at present...
    Does anyone have experience connecting an S750 satellite to a 250D system? Can I expect any problems? Or it'll work?
    Finally, just one more question:
    The remote control.
    Currently, the remote control unit on our 250D model works OK. But I am a bit worried, if anything happens, that the speaker set can become useless. So I'd like to order one spare new remote control for this model, just in case. Can someone help?
    Maybe, even if this speaker set is not produced anymore, a new remote control can be ordered from Creative?
    I'd really like to make these 250D speakers produce great sound again!? I am a big Creative fan and Creative 250D 2.1 THX is one of the best sound systems I have ever owned (or heard) and I'd like to do everyting to fix things up...
    Thanks for all the help!
    Cheers! :-)
    PS The satellites of the 250D look very much like these. But these Cambridge Soundworks satellites are more powerful (20W RMS); I was even thinking to order a pair of them, but not sure if they'll fit well. Maybe a pair of S750 satellites (70W RMS) is a better idea? But in any case, if I can find a new pair of satellites, what to do with the remote control?... Please, help!

    After exchanging several messages with official Creative Support, I feel a bit disappointed... For years, I have believed that Creative is a company that makes amazing audio products. They probably still do, but now that I am a customer who owns an expensive product of theirs, but with expired warranty, they don't want even to suggest a solution that can work for both parties!
    Why is Creative Support so un-supportive? :-( I am still a Creative customer, after all, right?
    My communication with Support went nowhere. After it was established that our 250D system is out of warranty period (it is only 2 years, btw), they refused to sell me a replacement satellite (even if they still may have some left in stock, for such cases)!
    Finally, I found S700 satellites on ebay and I hope that 2 of them will fit well with the 250D system. Impedance of 250D satellites is 8 ohms (S700 satellites are 8 ohms, too), power is almost the same (250D satellites are 75W rms, and S700 are 70W rms), Signal-to-Noise of both systems is 99 dB, and frequency response is similar, too (250D satellites should be around 50Hz - 8 kHz, I think, and S700 should be around 50Hz - 20 kHz).
    Well, my final 'point of worry' was that if anything happens with the remote control, we won't be able to switch on/off the system, even if the sub/amplifier works. So, I tried to ask Support just to sell me one new remote control, if they can. To sell, not to give for free, mind this! ;-)
    They refused!
    My e-mails are either left un-answered, or the only kind of reply I get is 'We can offer you 10% off our new products'. Well, I don't want to buy a whole new expensi've system, if I can just get 1-2 replacement parts for my old one, and have it working for years! :-)
    (Imagine you buy an expensive DSLR camera, you break the LCD screen, and imagine how Canon or Nikon refuse to sell you a replacement LCD, because you're out of warranty! I can't imagine that!)
    Well, with Creative it looks like this works only this way: Buy a new system. While speaker system is within its warranty period, Creative may replace defecti've and/or broken parts. Once system is out of warranty period, you can simply throw the system away, as Creative will not sell you replacement parts, no matter how politely you ask (and no matter if such parts are available at Creative or not)!
    I hope I will be able to use our 250D system for some more time (after the satellites arrive). I don't know how I can find a new remote control, just to be on the safe side.
    And I am not sure I will buy Creative product next time. I will carefully look around and maybe will pick up a product from a company which will offer me not only warranty support, but out-of-warranty support, too. That would be wise.
    I like how the high-end Creative speaker systems sound. I simply cannot understand how this company can be successful, if they make such great products, but then refuse to help its customers, when they have problems... :-(

  • How can I control the volume in a Appletv movie from my remote control App. In my IPad ?.

    How can I control the volume in a Apple Tv movie from my remote control App. In my IPad ?.

    There is not now, nor has there ever been a version of flash for any iOS device.
    Adobe has abandoned mobile flash, so there never will be.
    Browsers like iswifter or photon may work for you, but don't hold your breath.
    Check app store for an app of whatever game you want.

Maybe you are looking for