How do I bring Sony F3 footage into Final Cut Pro?

Hi,
Would love some help here.
I know the file are supposed to work well in FCP, however i dont have the plug ins.
I tried to convert the files to pro res 422 using mpeg streamclip, but that didnt work either.
would love some advice,
thanks

The F3 records XDcam to sxs cards?
I believe you need Sony XDCam Transfer 2.12 available here:
https://www.servicesplus.sel.sony.com/sony-software-model-PDZKP1.aspx
Once you install it, in FCP you go to the File > Import menu and choose XDcam. It will launch XDCam transfer and will put the clips in your project.
MtD
Message was edited by: Meg The Dog

Similar Messages

How do I import avchd sony cx700 camcorder footage into Final Cut Pro?

I've recently bought a Sony CX700 camcorder, but can't transfer the footage using the Log and Transfer window. Does anybody know how to import AVCHD footage into Final Cut Pro?

You use the log and transfer function.

How do I revert to original footage in Final Cut Pro X version 10.0.9, for some reason I have lost some audio in my timeline and would like to start again but cannot get the original footage?

How do I revert to original footage in Final Cut Pro X version 10.0.9?
For some reason I have lost some audio in my timeline and would like to start again but cannot get the original footage?
Only the edited version which is no good without the audio?
Please Help

What format is your problem clip? Are there wave forms visible in the section without sound?
Right click on the clip in the event broswer and choose Reveal in Finder; open the clip in Quick Time to confirm that there is sound throughout at that stage of your workflow.
Russ

How do I import a .fcpproject file into final cut pro?

How do I import a .fcpproject file into final cut pro?

You don't. The application opens it when it recognizes it in the correct folder structure.

How do I import HDR-AX2000 footage onto Final Cut Pro (FCP)?

Does anybody know how to import footage from Sony HDR-AX2000 onto Final Cut Pro? Thank you so much for your help in advance.

I figured it out! I'll post an answer here so if anybody needs help, they can follow the steps below:
1. Connect camcorder to Mac using the USB cable that came with the camcorder and mount it on your computer desktop (Just follow the instructions on your camcorder screen).
2. Copy the ENTIRE folder from the memory card to the desktop by dragging the folder to the desktop.
3. Final Cut Pro > File > Log & Transfer (NOT Log & Capture)
4. Click on "Add Volume" in the upper left corner of the window and select the "AVCHD" folder from the copied folder.
5. Drag media to the window below or click on "Automatic Transfer."
That's it. You should have all the imported clips in your Browser window now.

How to Import AVCHD 1080/60p Files into Final Cut Pro 7?

How do I import AVCHD 1080 / 60p Files into Final Cut Pro 7? And if there is no direct way [I certainly haven't found one, but I'm no expert], what additional software would be used? I want to import the files from a Panasonic HDC-HS700 onto an Intel Mac laptop [Mac OSX 10.5.8]? Obviously I don't want to compress & compromise my footage.
I’m sure a simple, straightforward series of steps would help many people with this issue.
Thanks!

Thanks for the response!
I'm guessing you've found ClipWrap2 to be better than competing products [such as AVCHD Converter for Mac, Toast Titanium, or Voltaic].
On to the next steps. Using Clipwrap2, would I leave the checkbox "Convert Audio to LPCM" selected or deselected [and what the heck is LPCM?]. In the pulldown menu would I choose "Rewrap (Don't alter video samples)" or do I save a step by choosing "Apple ProRes 422"?
And finally, am I gaining anything by shooting 1080/60p on this Panasonic HD Camera other than a headache? [Some have suggested this is not a True 60p.]

How can I get MPEG-2 video into Final Cut Pro X?

Hello! I have several MPEG-2 video files on which I need to perform some edits. When I tried to import them into Final Cut Pro, I learned that Final Cut Pro can't import MPEG files. Okay, so I went into QuickTime and exported one as 720p. 20 minutes later, I had a video that I could load in FCP. Awesome. Except that when I watched the video, the audio was waaaaaaaay out of sync. So, is there a different way I could get this MPEG-2 video into a format that FCP will like while keeping video and audio together?
I would keep trying a few different things without direction, but these videos are like 90 minutes long and the conversion process is lengthy.
Thanks!

Although I looked up the equipment, I couldn't find what kind of MPEG2. I'm assuming program stream.
I don't know why you had the sync problem with QT. You could bring it into FCP and detach the audio and manually line it up it's off by a constant amount.
Or you can use MEG Streamclip. You will also need the playback component, which is $20. Follow the instructions on the Squared 5 site to install it. Streamclip is worth having even if you don't use it this time around.
Good luck.
Russ

How to encode Panasonic HDC-TM700 footage for Final Cut Pro?

How may I encode Panasonic HDC-TM700 footage for Final Cut Pro? It is 1080p/ 50 fps (in Europe)....

I have not bought the camera yet so I cannot try. I have heard that the footage is not suppose to be supported that easily since it is 28 MBS "Avchd?" format. However people seem to be able to edit it in Imovie....

How Do I Import Photo to Movie into Final Cut Pro?

Hi all - I just bought Photo to Movie for Mac and am attempting to import it into Final Cut Pro (which it says can be done). Anyone familiar with this? thanks for any help

Maybe you should try the FCP forum, this one is FCExpress.
Al

How to work efficiently with HDV footage in Final Cut Pro 6

Hello everyone! I am fairly new to Final Cut & Mac. I have worked with Final Cut Pro 5 on my Powerbook G4 two years ago. But when I moved to HD, I switched to a PC with Adobe Premiere. Recently, I made the move back to Final Cut as I had problem with the stability of both Premiere 2.0 and CS3. I am really happy with it so far. In Premiere, I used the Cineform codec which performed very well. I also got a license for their MAC codec but unfortunately, I still have to capture under Windows.
Since I have not worked with HDV on the Mac before, I have a few questions which I hope people on these boards can answer.
1) How does Final Cut Pro 6 handle native HDV?
2) Is it beneficial to convert to Pro Res 422 (in terms of quality, but also in terms of editing speed, rendering time, in favor of processing speed etc.)
3) Which Pro Res 422 setting is advised? I will be capturing HDV through firewire and then recompress to Pro Res 422. The Canon XL-H1 squeezes 1080i into 1440x1080. So I figured I need the 1440x1080 setting. There are two options: normal and (HQ). The HQ files are around 4-times bigger then the native HDV file. The normal setting results in files around 2-times bigger. Coming from HDV, do I see the difference between normal and HQ?
4) What systems are recommended so I can work efficiently? i.e. how to setup the scratch disks. I currently have the applications installed on Disk 1, all scratch disks on Disk 2 + 3 (RAID 0) and final results on Disk 4.
I have the following system setup:
- Apple Mac Pro Quad-Core (2.66Ghz)
- 5GB of RAM
- ATI X1900XT 512MB
- Harddisks:
-1- Western Digital 750GB SE
-2- Western Digital 500GB RE2 (member of "VIDEO" - raid 0)
-3- Western Digital 500GB RE2 (member of "VIDEO" - raid 0)
-4- Western Digital 500GB SE
- Two Dell 2407 FWP 24" LCD monitors
Thanks for your help and don't feel obliged to answer all questions, I am already happy if one of them is answered!!

1) How does Final Cut Pro 6 handle native HDV?
Just like FC5.... no worries
2) Is it beneficial to convert to Pro Res 422
Just like the Cineform codec you will benefit from an all i-frame codec when working with titles and graphics. I wouldn't recommend capturing native then converting to ProRez as this will take an extremely long time. Many have found editing native up until the compositing then dropping the sequence into a ProRez timeline to render. I prefer to uncompress the HDV with hardware into a capture card and transcode on capture in real time. Depending on the flavor of HDV and the equipment you use you can probably find a method for this. I shoot run & gun field work on to tape, then with the deck I can export via HDMI and together with another product from Convergent Design it is converted to HD-SDI in the a Kona LHe into FC. The benefit for me is the all digital decompression from 1440x1080 4:2:0 to a 1920x1080 4:2:2 uncompressed HD-SDI signal to use anyway I need to. As to which level of PR I can't comment but I have used the lower level and it looks great. As to raid setup I can recommend www.maxupgrades.com to help you add two - four more drives internally for unbelievable speed and expanded storage space you will want. The owner (Syed) will give you all the support you need to take advantage of the Mac Pro capabilities for a low cost high performance raid solution. Sounds like you have a great setup in mind, you may want to look into the Kona LHe capture card for capturing and monitoring and a Convergent Design product like the HD-Connect SI or MI depending on the deck you are using. If you need broadcast quality monitoring look into the Matrox MXO.
Good Luck
Z1

Getting the data code infomation from my sony fx1 camera into final cut pro

hi
any help/advice would be great.
i have shot some footage and am capturing it now,ideally i would like a time of day timecode
i dont think the f1 has a timecode on it ,but when i press the data code button it shows the time at recording ,which is perfect for what i need, but when i look at the clip in the browser there is nothing in the media start and end box's.
so my question is ,is there a way to have the data code information (ie time of day it is recorded) shown in fcp?
cheers all
simon

i know i have posted it......
but it has got me bothered as there must be a way to view the data code infomation in fcp and somehow see it in the media in and out like you do in time of day timecode i get from other cameras hoping some clever person will know what i can do or if its not possible at all even though the data code can be read by other mini dv cameras
thanks all for your reply's

How do I import a .swf file into Final Cut Pro 6?

A client has given me a .swf file for use in their commercial. What is the best way to import this file to play full screen full motion?

The Final Cut Pro manual is very misleading. It says:
You can import any files that are recognized by QuickTime, including:
* Video files: QuickTime Movie, AVI, and Macromedia Flash (video only—you won’t be able to play any audio portions).
But Apple have since removed Flash support from QuickTime so these files can no longer be opened. The best thing to do is ask the client to deliver the file to you as a QuickTime movie.

Ingesting xa20 slow motion footage into final cut 7 or premiere

does canon have step-by-step instructions for ingesting xa20 slow motion footage into final cut 7 or premiere?

Hi davidframe!
Thanks for posting.
Not having made those applications themselves, Canon does not have step-by-step instructions for bringing slow motion footage into Final Cut Pro or Premiere. However, I am sure either Apple or Adobe have some helpful instructions they can provide if you contact them directly.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How can I import DVD footage in Final Cut Pro X

I want to edit a showreel of my own work in Final Cut Pro X (version 10.1.4). A lot of my old footage is only available on DVD. I need to get this footage into Final Cut Pro X but don't know how to do this. There are programs to convert DVD to DV but I don't know which one to use, and how to use them.

The script provided by MPEG Streamclip worked for me.
But there is an alternate way, which is basically doing by hand what the script does.
The actual component that is needed is stored inside an archive file in the inside the package. This file needs to be copied to a place where the system can see it.
Here are detailed instructions. Be sure you fully understand before putting any files in the Library folders, as described below. No guarantees, but if followed correctly I believe this works.
1) Double-click the .dmg file.
2) Inside there are two folders. Open the one that says "For Quicktime 6.4 or later..."
3) Control-click the QuickTimeMPEG32.pkg and choose "Show Package Contents".
4) Copy the file "Archive.pax.gz" somewhere else on your mac - I will use the Desktop as an example.
5) Double click the copy of "Archive.pax.gz" on your desktop. It will expand and create a folder on the desktop called "System".
6) Inside the folder called "System" is a folder "Library" and then "Quicktime", with a single file called "QuickTimeMPEG2.component".
This is the file that MPEG Streamclip needs!
7) I suggest you place this file in your own user's Library. To do this, hold down the option key and select Library from the Go menu in the Finder. There, if it does not exist already, create a folder "QuickTime" and copy the component there. This should work.
Note: the script actually places the component in a different location - one which I think should not be messed with (inside /System/Library).
I think it should work in the user's Library, but if not I would put in /Library (the Library at the root of the drive) before trying the location above.

Inputting footage from Final Cut Pro

I have input footage into Final Cut Pro, but would now like to try iMovie '09.
Can i move my footage from Final Cut into iMovie or do i have to input all over again?

iMovie should read all your FCP footage including ProRes movies as long as it's the same mac or another mac with FCP installed. Make a new folder in 'iMovie Events' and place your FCP movies. Next time you launch iM09 it will build thumbnails and footage will be read to use.

How do I bring Sony F3 footage into Final Cut Pro?

Similar Messages

Maybe you are looking for