How do I capture a still photo off of a dvd. I am on a MacBook OX6.

How do I capture a still photo from a DVD? I am on a MacBook OX6. I have tried downloading DVD Snap2 and VLC but I am not sure what to do with that once I have it. Trying to put together a scrapbook for my son and I only have DVD of an occassion.

Pause the playback and take a screenshot.

Similar Messages

How can i get a still photo off an iMovie?

How can i get a still photo off an iMovie?

You do not need the QuickTime MPEG2 disk image unless you want to convert some MPEG2 clips. For photos, you don't need it.
You can buy it from Apple at this link, but like I said, you should not need it.
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x

How do I capture a still photo from my video footage??

Probably easy I know, but just wondering how to capture a still photo from my video footage. I pulled a particular clip into my viewer window and have found the still shot I want, what next??
Thanks in advance for any help.
Cheers,
Bill
Boulder

Put the playhead over the frame in the timeline and choose Modify>Make Freeze Frame. It will appear in the Viewer window. Drag it into the timeline.
If you want a photo for iPhoto etc. put the playhead over the frame and select File>Export>Using QuickTime Conversion.
In the window that opens change the "Format" setting to Still Image from the dropdown menu.

How do I capture good stills from video on Photoshop Elements 8?

I'm using Photoshop Elements 8. When I try to capture still photos from video clips, the results are not very satisfactory. Usually the stills are very unclear, not sharp like I want them to be. I have to make many attempts to capture a still before I can get one that's halfway clear.   Does it have to be this way?   What can I do to get consistently clear stills from video? Thank you!

Fair enough, Barbara. Thanks!
Lewis B.
Date: Wed, 30 Oct 2013 18:08:37 -0700
From: [email protected]
To: [email protected]
Subject: How do I capture good stills from video on Photoshop Elements 8?
    Re: How do I capture good stills from video on Photoshop Elements 8?
    created by Barbara B. in Photoshop Elements - View the full discussion
Frame from Video is more or less a legacy feature in PSE 8. It was meant to capture a frame or two from a short homemade video at a low resolution. It doesn't do HD video at all, and isn't meant for a clip that's more than a minute or so in length. It's been dropped from the latest version because nobody has those kinds of movies anymore.
So the bottom line is you're better off doing this with some other program than with PSE.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5802253#5802253
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5802253#5802253
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5802253#5802253. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How do you capture a still picture from DVD

How do you capture a still picture from a DVD

Click iMovie/About. If you have version 9.0.4 (iMovie 11) this will work. If you have an earlier version, this will also work, but there are also other ways.
First, get an app called MPEG Streamclip, which is free. (MPEG Streamclip from Squared 5)
Open MPEG Streamclip.
In iMovie, select the clip you need. Then, right-click/Reveal in Finder.
Drag this clip into MPEG Streamclip
In MPEG Streamclip, move the playhead to the frame you want.
In MPEG Streamclip, click FILE/EXPORT FRAME.
Choose JPEG, TIFF, or PNG and give it a name.
You can then drag this photo into iPhoto.
I have created a short video Tutorial on how to do this. There is one error in the Tutorial, where it says that Command-click is the same as right-click. I should have said Control-click instead.

I have a MacBook Pro. How do I capture a still picture from a video in iMovie and print the still picture?

I have a MacBook Pro. How do I capture a still picture from a video in iMovie and print the still picture?

Click iMovie/About. If you have version 9.0.4 (iMovie 11) this will work. If you have an earlier version, this will also work, but there are also other ways.
First, get an app called MPEG Streamclip, which is free. (MPEG Streamclip from Squared 5)
Open MPEG Streamclip.
In iMovie, select the clip you need. Then, right-click/Reveal in Finder.
Drag this clip into MPEG Streamclip
In MPEG Streamclip, move the playhead to the frame you want.
In MPEG Streamclip, click FILE/EXPORT FRAME.
Choose JPEG, TIFF, or PNG and give it a name.
You can then drag this photo into iPhoto.
I have created a short video Tutorial on how to do this. There is one error in the Tutorial, where it says that Command-click is the same as right-click. I should have said Control-click instead.

How can I make a still photo from imovie

How can I make a still photo from imovie?

Let's assume you have iMovie 11 (Version 9). (If you have a different version, let me know. The instructions will be different.)
First, get an app called MPEG Streamclip, which is free. (google MPEG Streamclip from Squared 5)
Open MPEG Streamclip.
In iMovie, select the clip you need. Then, right-click/Reveal in Finder.
Drag this clip into MPEG Streamclip
In MPEG Streamclip, move the playhead to the frame you want.
In MPEG Streamclip, click FILE/EXPORT FRAME.
Choose JPEG, TIFF, or PNG and give it a name.
You can then drag this photo into iPhoto.
I have created a short video Tutorial on how to do this. There is one error in the Tutorial, where it says that Command-click is the same as right-click. I should have said Control-click instead.

I have photos on my iphone 4 that i'm trying to transfer to iphoto. The problem is when I plug the phone in, it only wants to transfer the new photos, not all. How can I take all the photos off my phone and put them into iphoto?

I have photos on my iphone 4 that i'm trying to transfer to iphoto. The problem is when I plug the phone in, it only wants to transfer the new photos, not all. How can I take all the photos off my phone and put them into iphoto? Even if there are duplicates, I'd like to make sure I get all the photos from my phone into iphoto. Thanks

To see all the photos on the phone, including photos that have already been imported into iPhoto, deselect the "Hide Photos Already Imported" checkbox. If the camera contains photos that have already been imported into iPhoto, those photos are hidden by default.

How do I create a still photo from a video in the new iMovie?

How do I creat a still photo from a video in the new iMovie?

I'll assume you want to create a still to use outside FCPX, not a still frame within FCPX. It's kinda hidden in the "share." Go File/Share/Add Destination. You want "Save Current Frame." After you've created that destination, it'll be there for you in the future under Share.

HT201269 ibook stopped transferring images via image capture. last month it worked. i hav an old ibook and i cannot update to newest itunes. which is fine. however, i need the image capture to take photos off my iphone 5. no, i dont want to use i cloud.

ibook stopped transferring images via image capture. last month it worked. i hav an old ibook and i cannot update to newest itunes. which is fine. however, i need the image capture to take photos off my iphone 5. no, i dont want to use i cloud. i would actually like to just plug it in to the usb drive the old fashioned way

I don't believe the iOS7 update was the cause for your issue. I have three devices all updated and they all show the Import To drop menu in Image Capture as shown below.

How do you drop a still photo into a video?

how do you drop a still photo into a video -- while continuing the audio track unchanded?

by popular demand, Kelli Applies Lip Liner to Audrey's Lips has been completely re-mastered. (ok, it was just one person who asked, but she's a very intelligent and articulate observer of such matters. she noted that the clip suggests "interesting possibilities", but that men probably would be unaware of that. i explained that "men are pretty simple, so we don't see too many moves ahead." she laughed.)
i believe that in an earlier post i indicated that in the re-mastered version i would delete the in-camera audio and dub in the audio from the Zoom H4n audio recorder. this i did.
(syncing the video and audio continues to be a nightmare, though ).
besides signifcantly improving the sound quality, using a separately recorded audio source allowed me to drop (2) still photos into the video track, and still preserve the continuity of the recorded conversation.
dropping in the stills the correct way (unlike in the first re-mastered video) was easier than i thought it would be. it's just a matter of dragging the Premiere Elements 7's red vertical timeline-cursor to the point on the timeline where you want the insert to begin, and then dragging and dropping the still photo alongside the red cursor. the amount of time the still will appear can be shortened or lengthened by dragging with the mouse -- the same way any other file can be extended or contracted.
the video coming out from the still was now running behind the soundtrack. but, the timeline shows the exact duration of the still, so the video coming out was shortened with the mouse by that same duration, and then the audio and video were back in sync.
to add the "sound effect" of the camera's shutter clicking (actually its mirror slapping) before each still appears, i found a point on the audio recording that had the click of my camera actually taking a still, and that had only a little audio from the models underneath it. removing all the audio before and after the sound of the camera click was, again, just a matter of finding the start/stop points i wanted, moving the timeline's red cursor to those points, and using the mouse to drag the ends of the audio file alongside the cursor.
because i wanted the sound of the camera click to merge with the converation anyway, i just put the audio file of the click on its own audio track (which allowed me to separately control its volume).
however, when i tried to copy and paste the audio file of the camera click to the beginning of the second still photo, i was not able to copy and paste by the normal method of using the mouse to right-click-file/left-click-"copy"/left-click-"paste". eventually, i tried doing so by clicking on "edit" on the menu bar at the upper left and then clicking on "copy" and "paste", and there was no problem. (go figure.)
as with the other re-mastered video, i brightened, increased contrast, made the hue a bit warmer, and added a little sharpening. (this has to be done individually for each separate video file that makes up the whole piece -- at least that's what i did.)
interestingly, the audio level can be tweaked directly on the timeline by using the mouse to drag up or down a horizontal yellow line running the length of the audio file.
i again rendered in Adobe Flash Video (.flv). (annoyingly, in XP at least, there's a default download destination that has to be reset everytime you want to save in a different location). from a drop-down menu i selected "NTSC Flash Video 700k" (just in case) and left the file name as "Untitled" (since no matter what i change it to, it saves as "untitled.flv", so i have to rename it anyway once it's saved).
i went into "Advanced..." and, to preserve the dimensions and the HD, i unchecked "Resize Video", chose "Same as source" for the frame rate, and checked 2 "Encoding Passes" (just in case).
for some reason, everytime i click the "save" button, it asks what i want to call these settings. if i use the name i used for the same settings on the previous go-round, it says that that name is already used and (impliedly) can't be used again. so, i add the new date, and yet another name for the same settings gets added to the drop-down menu (odd).
once the compressed .flv file was saved, it was an easy upload to youtube.
btw, it seems that the Elements 7's Audio Mix defaults to 0 dB, OR whatever the setting was in the prior saved version, unless i use the mouse to continuously "ride the slider pot". that's ok for a 48-second video, but does anyone know of a way the dB can be set so that it just sits there, instead of moving back to where it previously was

How do I delete all the photos off my phone

how do I delete all the photos off my phone ?

Hi tehdeh,
Welcome to the Support Communities!
There are a couple of ways to do this. As a precaution, I like to import my pictures to my computer first ... which gives me a backup of the photos, AND gives me the option to delete them after import. This article explains how:
iOS: Importing personal photos and videos from iOS devices to your computer
http://support.apple.com/kb/HT4083
If you have synced photos or albums from iTunes to your iPhone, you can remove them that way as well:
iTunes: Syncing photos
http://support.apple.com/kb/HT4236
Cheers,
- Judy

How can I create a still photo from my video

How can I create a still photo using my video.

I'll assume you want to create a still to use outside FCPX, not a still frame within FCPX. It's kinda hidden in the "share." Go File/Share/Add Destination. You want "Save Current Frame." After you've created that destination, it'll be there for you in the future under Share.

How can I put a still photo in to a iMovie tralier on the iPad 2

How can I put a still photo into a iMovie tralier on a iPad 2

Here's one way.
You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import.
 Cheers, Tom

How do I place a still photo over a video?

How do I place a still photo over a video, where the sound keeps steady, but the still photo replaces the videos image for a duration?
I've got one placed and it's working great, but can't remember how I did it. I've tried everything. I'm working with iMovie 08'.
It appears like a music item in my project window, a thin blue filled line with the duration in it, just above the video and I can adjust the length of time the still is displayed. (Just like an audio/sound clip) The audio is uninterrupted.
Can anyone help me? Thank you!
Oh... my email is no longer [email protected]
I using [email protected]
I can't figure out how to change my email address in here or if it is possible...

switch-ON the Advanced Tools in iMovie's prefs.
drag your still onto the clip until the cursor gets a Green Plus Sign and choose Cutaway
Ghary Bowlin wrote:
.... I can't figure out how to change my email address in here
you shouldn't post your eMail here anyhow.
this is a board - no 1on1 support

How do I capture a still photo off of a dvd. I am on a MacBook OX6.

Similar Messages

Maybe you are looking for