How do I change DPI in Photoshop CC without changing the pixel dimension of the file?

I used to be able to do this in Photoshop CS6 by simply clicking the check boxes in the "image size" dialog box:
scale styles
constrain proportions
resample image
(all boxes UNCHECKED)
Then input the dpi (usually converting a 300dpi print file to 72dpi for web). And the pixel dimension will stay the same.
In CC the only option I see is "scale styles" which does not apply to the pixel dimension of the file.
Please help. I would hate to have to do this function in CS6 all the time.
CS6:
CC:

Just uncheck the [ ] Resample checkbox, then change your Resolution.
Change the units from Percent to Pixels if you want to see pixel dimensions.
Once you've successfully run it through (after OK), note that it will remember your units settings the next time you use it.
-Noel

Similar Messages

How do you find the pixel dimensions of a photo to embed in Illustrator CC?

We recently upgraded our software from CS3 to CC. I'm having trouble determining the pixel dimensions of the photo I want to embed in Illustrator. In our old work flow, we simply clicked on the object in Illustrator, and then opened a new document in Photoshop, and it would retain the dimensions at our document size in Illustrator. It was then a simple matter to paste the photo into the box, position and crop and save as a PSD file and then place in Illustrator. That does not work any more in Creative Cloud. The object downsizes to 72 DPI while retaining the resolution setting. We need to keep our Illustrator files to the minimum, so embedding larger than needed files is not possible.
I've researched a bit and I see others with similar problems, but I haven't seen a workaround or a way to determine the pixel size. Document info in Illustrator gives the 72 dpi pixel settings, even though the document is set to reproduce at 200 dpi.
This is something that used to be so simple I didn't think much of upgrading. Now my workflow is horrendously long. I have to rasterize the entire graphic and then crop what is the inset photo. If there is a simpler way, please tell me. All the literature is backwards, about placing an already sized PS image into Illustrator. I need the other way 'round.
Thanks in advance for any help.

I think I have a workaround: Make sure the clipboard settings are on 72 by cutting and pasting a 72 dpi file in PS, as it seems Illustrator images are seen that way, no matter what the output resolution is. Click on Photoshop and start a new document. It will retain the proportions of the Illustrator image in 72 dpi. Then open image size and make sure the resample box is checked. Change the resolution to the desired, in my case 200.. Then place and crop your photo, and save the PSD file. Open Illustrator and place the PSD file. This works for me.

How to change the pixel dimension height?

I need to fix the pixel dimension height "768" for tiff images via scripting. Kindly advise me how to change the height for the images.

i am using vb.net i can't able to fix exact width and heigth for my below code
appref.Preferences.RulerUnits = Photoshop.PsUnits.psInches
docref = appref.Open(CheckerPath.Path & \" & InputFile_From_Illust)
TiffSv.ImageCompression = Photoshop.PsTiffEncodingType.psTiffLZW
docref.SaveAs(IllustFolder + "\" + IllustFile.Name, TiffSv)
docref.ChangeMode(DestinationMode:=Photoshop.PsChangeMode.psConvertToRGB)
TiffSv.EmbedColorProfile = False
Dim heg, wid As Double
heg = 768 / 300
wid = 576 / 300
docref.ResizeImage(wid, heg, Resolution:=300)
But its fixing width as 0.46 and height as 0.613 why its happen i don't.
please advise me.

How can i see how many people are using my apple id without changing the password ?

how can i see how many people are using my apple id without changing because some people have it

I'm not sure that you can. Why have so many people got your password? So many in fact, that you don't know how many.
You can see how many computers are authorised to play any songs you have purchased from the iTunes Store, but that isn't quite the same thing.
Perhaps a better idea would be to change the password and not let anyone else know what it is. That would at least prevent anyone else from changing it and locking you out of your own account.

How do you save work in a template without changing template

Using pages;How do you save work in a template without changing template?

When you open a template it is a copy of the template you get. You can write, add, delete or change what ever you like. It will not change anything in the template. When you save you have a document, not the template.

Is it possible to resize a photo in iPhoto--controlling the maximum dimensions and the dpi?

is it possible to resize a photo in iPhoto--controlling the maximum dimensions and the dpi?

The dpi depends on the print size you'll be making. This explains it in detail: The Myth of DPI.
A 300 dpi image for a 4x6 print will have fewer pixels in it than a 300 dpi image for an 8. 10 print.
You can set the pixel dimension of a photo by exporting it via the File ➙ Export ➙ File Export menu option and use the Custom size setting. However, you should crop the photo to the size ratio you want before exporting, i.e 4 x 6, 5 x 7, etc. Then set the maximum pixel size you want for the image:
OT

How can I creat a 802.1x Profile without Lion Server? I miss the plus-button in Lion to creat a 802.1x Profile.

How can I creat a 802.1x Profile without Lion Server? I miss the plus-button in the Network Configuration (OS X Lion) to creat a 802.1x Profile.

Tried this?
http://blog.affien.com/archives/2011/03/16/802-1x-configuration-profile-on-lion- mac-os-x-10-7/

How to resize photoshop image without changing canvas size?

When i had the older versions of photoshop i would change the image size and it would enlarge on my canvas for me to rearrange. Lately i realized on CC when i increase image size so does my canvas size. Is there anyway to prevent my canvas size from increasing too?

I am having what appears to be this same issue.    I am using PS CC.
hello @ c.pfaffenbichler
I resized my image in image> image size.
Details:
I am not a ps expert but woefully self taught. However through much trial and error I have in my experience over the years, achieved some comfortability with the image size dialog box as well as the canvas size dialog box. SOME comfortability lol. That is, I feel that I understand what is going on most of the time and when flummoxed have studied adobe literature or read hundreds of posts here and elsewhere to gain additional knowledge which many times resolves the issue. I like digging and finding the answers.
In this case, my digging is done dug a giant hole and I am exhausted and found nuthin'.
I feel like I am going nutso.
In my mind,
1. There is the image I am working on
2. There is the canvas the image is sitting on
My expectation and previous experience is that I can change the Image size by going to Image > image size and this change does not affect the canvas size.
My expectation and previous experience is that I can go to Image >canvas size and change the canvas size and this does not affect the image size.
I could also use the Transform to resize the image which also, would not in my expectation, change the canvas size.
In the beginning of my workflow on this particular collage I did not have this issue, so that leads me to believe I did or am doing something to cause this rather than it being some kind of bug.    But what do I know.
I thank you in advance for your assistance.

Why am I being told that a JPEG file that I made changes to in Photoshop 6 (CS6) can't be saved? The message I get says that either the file is locked and I don't have permission to execute this or another program is using this file.

i recently purchased a 21.5 iMac with Yosemite (10.10.1) and was disappointed to discover that my CS6 programs are not functioning correctly. I am unable to use the "Save As" command when making changes to a JPEG file in Photoshop. The message I get says that either another program is using the file or it is locked and I don't have permission to execute that command. I'm experiencing a similar problem in Bridge when trying to move an unwanted file to the Trash. Again, I get a message telling me that i don't have permission to do this. Lastly, I'm unable to open any Camera Raw files. Any suggestions? I had no problems with the Mavericks OS on my old iMac and although it's much slower, I'm tempted to go back to using my old iMac. At this point, I feel as if I've just wasted $2300+ (tax included).

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

How can I edit my EXIF Date info without changing Time info?

I recently went on a shoot with three cameras, one of which was set at the wrong date (sometime in 2012). I now want to correct all the date stamps on the photos taken by the camera with the bad date settings but am finding this next to impossible to do quickly - I have 416 incorrectly dated photos.
In iPhoto '06 you could go to Photos - Batch Change and a dialogue would pop up with separate Date and Time boxes; I am using iPhoto '08 which has merged these two fields into one, meaning I now lose the correct Time of Day EXIF metadata for each photo I try to change the incorrect Date EXIF metadata on.
I have googled for a separate app to do this, but none do this - they all seem to change everything in one go.
How can I fix my problem and change only the Date info while keeping the existing Time info in a Batch process?

Like I say it's a while since I used 08, but I can certainly roll back 365 or even 400 days on iPhoto 11, without changing the time using the adjust date and time command.
Aperture uses exactly the same mechanism.
It's even longer since I used iPhoto 6.
I did a quick google search and found this:
http://joemaller.com/970/date-shifting-in-iphoto-08/
This shows exactly the same process as iPhoto 09, 11 and Aperture, and exactly what I can use to time shift a group of photographs.
I don't think that the 08 apps were "dumbed down" at all. If I recall correctly, iPhoto gained lossless editing at that point - a very significant enhancement, and no, I don't think there was any effort to push people to change to more expensive products. IIRC every version of iPhoto since then has been less expensive. Apple did do a major rewrite of iMovie at the point, but left iMovie6 available for free as a download for two years. iMovie 11, though a very different interface, has long since overtaken iMovie 6 in capability.
Regards
TD

How to pass parameter from FM to report without changing interface of FM

Hello experts,
How can I pass a table name from a FM to the report calling the FM, without changing the existing interface of the FM.
Thanks,
Ajay.

Hi,
I f you want to pass any parameter from FM to Report or Vice-versa, parameter should me maintained in the FM otherwoise you can't pass any other than existing parameters.
Otherwise create a custom FM.
Regards,
Sunil

How to change color of iCal event, without changing the calendar.

I have my work Exchange calendar imported to iCal. When I want to change the color of an event in iCal, it actually changes the event to a differnet 'calendar' and therefore no longer shows up on my work calendar. This wouldn't be a problem, excpet my secretary can no longer see the event on my work calendar that shows up on her PC. So how can I change the color of 1 event, say to 'Important' or 'Must Attend', without changing the calendar?

Welcome to the discussions, spet.
Right click (Control-click) the calendar you want to change in the left pane and select Get Info. There is a colour selection button to the right of the calendar name..
AK

How much modification can be made to VIs without changing the test sequence?

Hi,
Stupid question (likely).
If I have a TestStand (4.1) test sequence and within I am calling various Labview VIs (8.6), can I modify the VI in a small way without affecting the teststand sequence?
I realise if I change the connectors in anyway this will definitely require modification (or reloading) of the VI in teststand but what if I change something more internal, say change a for loop to while loop or add cases etc.??
Basically I want to add some features to a VI but I don't want to have to go through over 100 sequence files, reload the VIs (although this can be done programmatically), save the files as new versions and then test them to make sure nothing has broken.
Cheers.

Hey WiMAX_Eng, thanks for posting your workaround. In a previous post you mentioned programatically relinking VIs. I assume that you followed the method discribed in the following articles. I wanted to post them here, so other members of the community can refer to them.
Update VI Calls Dialog Box
http://zone.ni.com/reference/en-XX/help/370052H-01/tsref/infotopics/db_update_vi_calls/
How Can I Update All The VI Calls In A TestStand Sequence?
http://digital.ni.com/public.nsf/allkb/D7CB87B8EE52E7978625758400762D2D?OpenDocument
Thanks for your time,
Best wishes,
Rich R
Applications Engineer
National Instruments UK & Ireland

How to change newly registered user name, without changing entire apple id, in iCloud?

Recently created new user name. Need to change it. I do not want to change my entire apple id account information. The only information I can find in communities, has to do with the previous Mobile Me stuff and not the new iCloud stuff. Again, I don't want to change my long standing account id with Apple. There must be some sane way to do this! I've been searching now, for over 2 hours. Help!

Go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

How to change field labels in CRM without changing original data structure

Hello, I wish I could change the label of the input-type fields that are visibile in the CRM Account search page.
The only way I have found so far is: go to the structure CRMT_BSP_SEAREQ_ACCOUNT
and change the short description of the component.
This is, anyway, very invasive, as I have to modify a SAP structure and I am asked an activation key.
I have gone through the PCUI but cannot find a way to change the labels, anybody has a hint?
At least, I would like to give the labels the same length so that the page is better organized, now all columns have different widths...

Sorry, I had not seen this previous answer
https://forums.sdn.sap.com/click.jspa?searchID=9822963&messageID=4781696
Very nice!!!

How do I change DPI in Photoshop CC without changing the pixel dimension of the file?

Similar Messages

Maybe you are looking for