How do I change my HP 2540 to print in color

How do I change from grayscale to print in color on HP 2540?

Hi,What operating system you are using? What application you are printing from?

Similar Messages

How do I change an hp officejet j6400 printer change from color to black and white? I have a Mac 10.8 OX system

How do I change an hp officejet j6400 printer change from color to black and white?
I have a Mac 10.8 OX system

Hi JasperNM,
You may access a card within the cart reader by mapping a network drive to access it, then you may transfer the fies to your Mac.
First locate the printer IP address as following:
Follow these steps to print a Wireless Network Test Report, the IP address will be listed within that report:
On the control panel, press the Setup button ( ).
Press the Right Arrow button ( ) to scroll to Network Setup , and then press the OK button.
Press the OK button to select Print Network Settings .
Press the Right Arrow button ( ) to scroll to Wireless Test Report , and then press the OK button. The Wireless Network Test Report prints.
Now map a network driver by following the steps below:
Click the Finder icon on your Mac.
Click the Go menu.
Click on Connect to Server.
In the Server Address field enter “smb://ipaddress of the printer” and click on Connect.
You will be prompted to enter the password. leave it as is and click on Connect.
The Memory card will be mounted as a disk in the Finder.
Shlomi

How do i change my email to my printer when it says my previous password expired?

how do i change my email to my printer after it say the password it originally printed out expired?

Go to: https://appleid.apple.com/.
Click "Manage My Account", sign in, and go to the Password and Security section. If you've forgotten your answers, there will be a link just under the security questions fields where you can have a reset email send to your Rescue email address.
If you have no luck with the above advise, then go to - http://www.apple.com/emea/support/itunes/contact.html. Enter in your personal information, and explain the issue. The iTunes Store agents, are the only department that have access to resetting your Apple ID and security questions, so you will need to contact them in this fashion.
If all fails, and you still have no results, call apple at 1 800 692 7753, and see if they can assist you further.

How can I export to PDF for Offset printing including color and grayscale photo's?

After reading dozens of forum, I still don’t found the answer.
I made a photobook with full-colur and B/W photos for Offset printing. I want the B/W to be in grayscale to avoid color possible color shades. It seems InDesign doesn’t support grayscale, the images become way to dark. Even with exporting without any colour conversion or destination and/or including original colour profiles, the grayscale pictures are being exported to dark to PDF.
How can I export to PDF for Offset printing including color and grayscale photo’s?

Yes, the Photoshop & ID CMYK working spaces are the same
This can get difficult because the 3 programs handle soft proofing differently.
The working spaces don't matter, it's the document profile(s) that manage the preview. So here is the same grayscale image placed in ID on top and PS on the bottom. I've set my Photoshop info to show the doc profile in the lower left corner. I can see my InDesign's Document CMYK profile in my Proof Setup (the Working CMYK is different and isn't being used). Both profiles are effectively the same Coated FOGRA39 (Black Ink FOGRA in the case of PS).
But the previews don't match because I have Overprint turned off, so the InDesign preview is Gamma 2.2 or a "screen" media preview.
If I turn on Overprint preview I get a match because I'm soft proofing for print:

In iTunes, my printing is white and the background is black, How do I change it back to white printing on a black background.

In my iTunes store, the printing is white and the background is black and I have forgotten how to change it back to black printing on a white background? I know that it is a simple answer, but right now I cannot think of it.
Also, what is the "other" when you are syncing an ipad in itunes and in my case the other is more than half of my 64Gb. How do I find out what it is and then get rid of it if I want to?
Thanks

Hi gramie47,
Sorry to hear that didn't resolve the issue.
I checked online for issues printing from the Internet, found a couple of things you can try. Most likely it is a setting that needs to be changed in the browser settings, since the printer prints fine from the computer.
From Internet Explorer, go to File, Page setup, Remove check from "Printer background color and images" if checked, or vise versa, to see if that helps.
Here is another document you may take a look at.
Map Images May Not Print Properly When Using Internet Explorer.
If you continue to have issues, contact your Internet Provider for further assistance.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Three Numbers questions:how do you change the auto default background or fill color from white to another color to use in multiple succeeding operations? what is the formula to express the ratio of two numbers as a percent?

Numbers questioons:
-how do I change the automatic default background fill color so it stays a non white color?
-what is the formula to express the ratio of two numbers as a percentage?
-how do I create a signal formula to be sue against an entire column of data (for example, if I wanted to multiply the each cell in the column by the number 10)?
-I have created a spreadsheet in Numbers with header and rows labelled and it contains formulas as well. I now want to create a new 'blank' of this template with same header and row names and formulas, but without the cell entries from my earlier exerciser so I can use again in the future. How do I do this?

Hi Matt,
For short columns, the easiest method is to select the cell containing the formula, then grab the fill handle (small circle at the botom right of the selected cell) and drag down.
For long columns, use either Jerry's suggestion (copy/paste) or Insert > Fill > Fill Down.
Copy/Paste:
Select the cell containing the formula. Copy
Select from the cell containing teh formula to the end of the column. Paste.
Fill Down:
After entering the formula, and pressing enter...
Click on the column reference tab to select the whole column.
Command click on each cell above the one containing the formula to remove it from the selection.
When cell with the formula is the top cell in the selection, go Insert > Fill > Fill Down.
Pick whichever is easiest.
Regards,
Barry

How can I change the text layers to a specific color at the same time and in the fast way?

Dear all!
I am using Photoshop CS5. I typed 65 text layers in my file and wish to change their colors to a specific Black Color, but I don't know how to select all the layers at the same time so that I can change all the text layers from Red Color to Black Color in the fast way. Now I only select one layer and then change. It means I must select and change 65 times for the text layers. Hope you can understand what I mean.
Thanks a lot.
My Kindest Regards,
LUCK

One way is to select all the text layers, select the type tool in the tool box
and set the color from the tool options bar.
MTSTUNER

How do I change a photo from iPhoto back to color?

I recently took a picture of my friend, and when i uploaded it into iphoto, i clicked on the b&w, and sepia color effects. I determined I did not like them, and now I cannot figure out how to change my photo back to the original color. Please help.

never mind i found out how by clicking revert to original

How can i change the region for the printer all in one

Hp Deskjet 3050 series J610.
Error: Non Compatible Cartridges
i bought a printer all in one in mexico border, this had a 122 cartridges, but now i bought a new cartridges 61 in texas.
i install it but when i send to print appear a error that show "Non compatible cartridges", so i check them in HP site, the numbers are different like mexico and US, but the HP part number are the same for both, so i try to fix the problem i found a solution tha say that required change the region for the printer.
How can i do this?
Thanks.

Welcome to the HP Forum!
mrmartin wrote:
Hp Deskjet 3050 series J610.
Error: Non Compatible Cartridges
i bought a printer all in one in mexico border, this had a 122 cartridges, but now i bought a new cartridges 61 in texas.
i install it but when i send to print appear a error that show "Non compatible cartridges", so i check them in HP site, the numbers are different like mexico and US, but the HP part number are the same for both, so i try to fix the problem i found a solution tha say that required change the region for the printer.
How can i do this?
Thanks.
You will have to contact HP to have the region for yourr printer changed. A representative will explain how to do it.
Kind regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How do i change from"offline" to "online" printing in Windows 7 for HP photosmart 5514

how do i change from 'offline' to 'online'

Under Printer Preferences click on See what's printing. That will open the printer's preferences dialogue box. Select the Printer tab and then click on online. As long as there is connectivity between your PC and the printer it should then change to online.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How do I change my HP Photosmart C4580 printer wireless settings using the apple provided drivers?

I have a mac pro running the Yosemite OS. I have a HP Photosmart C4589 all in one printer that had been working fine until I replace my router.
Now I can only use the printer as a usb. I know I need to change the wireless settings in the printer but have not learned how to do so.
The printer software is not compatible with Yosemite so I cannot use the hp software to change from usb to wireless.
Based on all that I have read I tried to download replacement hp software and still had no way to change the printer wireless settings.
I uninstalled that software and went to Apple and downloaded drivers but there is no software that will allow me to change the printer wireless settings.
What can I do now?

From the front of the printer (probably the Wireless or Network menu), Restore Network Defaults.
Now on your PC:
1. Start > Control Panel > Printers - delete the printer.
2. Start > All Programs > Hewlett-Packard > [C4500 series] > Add a Device. You will want to add a network device. Eventually it will ask you to connect a USB cable to the printer in order to communicate the network info to the printer.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How do I change my Desktop Picture to a solid color?

Hello folks, I'm trying to change my desktop picture to a solid black color in Leopard. How do I do that? I went into the desktop preferences under System Preferences but under solid colors, they do not have black. And I have no idea how to add more colors to the few selections there. Can someone help me out please? Thank you.

http://www.slashdotdash.net/articles/2006/12/19/mac-os-x-desktop-black-backgroun d-wallpaper
That's one idea, they have a solid black .png file on there, and you can either set it as your desktop and tile it, or follow their instructions.

How do you change the page format to print a larger area?

Hi there, another new to mac and new to numbers guy.
I'm trying to find the windows equivalent to change page format.
I want to reduce the blank border surrounding my table and print a larger area. How do you reduce the blank border that prevents you from printing up to the paper edge?
cheers

Page margns in Numbers are set in the Layout Inspector.
Open the Inspector and click the Layout button.
Edit the four margin settings as you wish. Reduce the (page) header and footer settings to zero if you don't want to include running headers or footers on your pages.
Note that margins will be limited by the capabilities/settings of your printer. Printing to the edges of the paper usually requires a choice to be made in the Print dialogue as well as for the document itself.
Regards,
Barry

How to make changes to Adobe PDF (Distiller) printer's printing prefrences programatically?

I want to change the "Default Setting" in the Adobe PDF (Distiller) printer's printing prefrences programatically. How can i do that?

Why? I don't know :-)
When I compare the documents (single page 'export' vs booklet-spreads 'print booklet') at 800%, the images on the 'export' are crisp. The images on the booklet are seriously pixellated/unreadable.
If it *is* possible to get print-ready, I'd love to!
This is what I'm doing - any help is greatly appreciated.:
File > Print Booklet.
Displayed settings:
Printer: Adobe PDF
Booklet type: 2-up Saddle Stitch
Creep: 3mm
Margins: Automatically Adjust to Fit Marks and Bleeds
Print Blank Printer Spreads
Click Print Settings:
General:
Print Preset: [Custom]
Printer: Adobe PDF
Setup:Scale: 100%
Output:
Color: Composite CMYK
Graphics: Images: Send Data: All

I scanned some black and white negatives into my computer (iMac) where they were stored aas positives on the hard disc. When I import them to iPhoto they turn back into negatives. How do I change them into positives for printing?

I have scanned some black and white negatives into my computer(iMac) where they are stored on the hard disc as positives.When I import them into iPhoto to print they turn back into negatives.How do I turn them back into positives?

That's because you scanned them as B/W photos and iPhoto 08 doesn't support the grayscale color profile. You can either rescan them as color photos or export them as originals out of iPhoto to a folder on the desktop and applhy this Automator application, Convert to JPG and Embed sRGB Profile, on them and then remimport into iPhoto. You can download it from Toad's Cellar . Be sure to read the warning on the website about not applying it on your only copies.
OT

How do I change my HP 2540 to print in color

Similar Messages

Maybe you are looking for