How do i change the chart axis; x to y and y to x?

i'm new to the numbers, please suggest me for the same
thanks,
Rajesh Ranadive

Hey Rajesh Ranadive,
Welcome to Apple Support Communities! Check out the Numbers Help document, specifically the section titled "Modify chart data references." I pasted the relevant steps below:
Numbers Help: Modify chart data references
http://help.apple.com/numbers/ipad/1.7/#tan72719392
Switch rows and columns as data series:
Tap a chart, and then tap Edit References.
Tap in the top-right corner of the screen, and then tap your preference to plot table rows or columns as the data series in the chart.
Tap Done.
Cheers,
David

Similar Messages

  • How do you change the click box properties (line colour and width) in Captivate 7.0?

    How do you change the click box properties (line colour and width) in Captivate 7.0?

    Yes certainly, we can do that, insert a smart shape and use it as a button, then go to the properties pane, change the Alpha to 0, that will make it transparent, and add the stroke color as red and increase the width.
    In case of a button, you have to select button type as transparent and do the same.
    Thanks.

  • How do I change the size of file menu's and tool icons in Photoshop' opening page.

    How do I increase or change the size of file menu's and tool icons on the opening page/worksheet of Photoshop? The File Menu drop down commands read properly at a comfortable size. I am not sure how I accomplished this, but everything I have tried has no effect on the other page items.

    Hello, you can change most of Photoshop's interface text by going to preferences>interface>UI font size.
    For the size of the top menus and the whole interface, there is no function to do that for the moment. I suggest to vote on this thread: http://feedback.photoshop.com/photoshop_family/topics/problem_with_hi_res_monitors

  • How can I change the color of a folder icon and also the color of the text

    I am using Yosemite.  Is there any way to change the color of a folder icon and also the color of the text?

    You can't. You can't individually set the properties of just one array element.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • How can I change the X-axis increment in a waveformgraph

    The X-axis always increments by 1, but I am acquiring one point of data every 100 ms. So my chart moves 10 times fater that the real time. How can I set my x-axis to increment 0.1 every time I add data to my Waveformgraph in VB net?
    The X-axis collection is not showing any property to change that.
    I have a continuous data acquisition giving me timed data at 100 ms rate.

    Thank you for posting to the NI forums.  You can set the update increment of the WaveformGraph plot function by using the overloaded function as follows:
    PlotYAppendMultiple( ByVal yData As Double(,),
       ByVal orientation As DataOrientation,  
       ByVal increment As Double )
    I did this in the VB.NET example program, "ContAcqVoltageSamples_IntClk", by adding the following line to the dataToDataTable function.
    WaveformGraph1.PlotYAppendMultiple(sourceArray, NationalInstruments.UI.DataOrientation.DataInRows, 0.1)
    The increment will be set to 1 / (sampling frequency), so in your case, it will be set to 0.1.  This function is documented in the NI-DAQmx .NET Framework 2.0 Help.
    I hope this helps.  Post back if you have any further questions.
    Ed W.
    Applications Engineer
    National Instruments
    Message Edited by Ed W on 05-04-2007 10:36 AM

  • Changing the chart axis step

    Hi all,
    i have a chart with some dates in axis X, values of money in axis Y. My dates not having the same step. Example: 01/10/2008, 01/11/2008, 02/25/2008, 03/01/2008 etc...
    I need to change the step of my axis X (like a day) for having spaces between dates proportional to delta time.
    How I can alter the step of my axis X?
    Thank you all.

    You'll have to union on a query that returns all dates and a zero measure (or you could try null) but it isn't very pretty. Rumor has it a future edition of OBIEE will be 'continuous time aware' ...

  • How do I update the chart axis values??

    I created a Gantt (bar chart) chart in Numbers for a project at work showing schedules.  It looked fine, and everything worked great.  I want to use that same chart, but I want to just update the data in it.  I can get the bars to change, but the Y axis data (not the numbered values in the chart, but rather the the actual names out to the side of the chart) will not change.  For instance....
    Name
    Start Date
    Finish
    Task 1
    January 1, 2013
    January 15, 2013
    Task 2
    February 1, 2013
    February 15, 2013
    The Tasks on the left will be the Y axis fields in a bar chart....and the dates will populate the graph.  I've created my graph from this data and got it like I want it.  Now let's say I want to simply change some things in the Name column:
    Name
    Start Date
    Finish
    New Task
    January 1, 2013
    January 15, 2013
    Task 4
    February 1, 2013
    February 15, 2013
    So without creating a new chart or anything, I just want to reflect the new names in my existing chart.  In Excel, when you change the value data, it updates the chart and "it just works" .  I'm wanting to use Numbers for this, and I feel like this is a simple thing that I'm just missing.  Help!

    Jerrold....thanks for the reply.  While you didn't answer my question exactly (I know I was a bit vague), you did put me on the right path.  I was trying to get the Category Axis values to change on the chart whenever I updated them in the table itself.  I couldn't figure out why they weren't but I think I have now. 
    I noticed that in the Category Axis field (Inspector) it had the actual typed names of my tasks from the table instead of the cell locations.  So...."Task 1" instead of "Table 1: C7".  I cleared out all of the text in the Category Axis field, which removed it from the chart.  then I just clicked on the fields in the table and it populated the Category Axis blank with the table/cell info instead of the text.  So now when I update one of the fields, it updates the chart because it's pulling from the cell data every time.
    I'm not really sure why Number, by default, enters the text into the Category Axis when making a chart instead of putting in the corresponding cell locations, but whatever.  I got it working now and should be good to go going forward, thanks for your help.

  • How do you change the y axis value in numbers

    Hi
    relatively new to numbers. How do you alter axis value and set minimum, maximum values an step values in numbers
    Cheers

    Hi CA,
    Did you really intend to post this Numbers question in the Pages forum?
    Axis values are set in the Axis section of the Chart Inspector:
    Select the chart.
    Default values are 4 steps and auto settings from data for the min and max values for each axis. The x axis is a Value axis only for a scatter chart. Otherwise it is a Category axis.
    To set Min, Max values and number of steps for either axis, click in the appropriate box, then either type the value or use the stepper (which apears) to step to your chosen value.
    The maximum number of steps is 10.
    Regards,
    Barry

  • How can I change the Y axis to show my values in a descending order in Numbers. eg zero at the top and the maximum value at bottom?

    Hi,
    I'm just about getting to grips with Numbers, but I'm stumped at the moment with this problem.
    I want to show zero at the top on the (y) axis, as zero is the goal and 100 is the starting point?
    can it be done? i would really appreicate some help on this.
    Kind regards
    Rob

    Is it so difficult to read given answers ?
    Barry described the correct scheme.
    In the table "to_chart", the cell A1 contains :
    =ROUNDUP(ABS(MIN(Tableau 1 :: B:E))/10,0)*10
    The cell B2 embed the formula :
    =$A$1+Tableau 1 :: B2
    Apply fill down and fill to the right.
    On the left edge, the colored rectangle is a text block in which I inserted the label values.
    Of course if you dislike this scheme, you are perfectly free to use an other application.
    Yvan KOENIG (VALLAURIS, France) lundi 4 juillet 2011 14:37:56 iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • How can i change the below fixed app line's and the app groups's background colour?!

    I Now upgraded my iPhone4S to iOS7, and I hate this colour (betwen pink and "magenta"), but i don't know, i don't find, how can i change ír?!

    With iOS 7, Apple has began to emulate the aesthetics of the country in which its' devices are manufactured.
    Beijing's watercube is eerily reminiscent of the new home screen on my iPhone.

  • How do I change the name of my Apple ID and iCloud account?

    I want to change my Apple ID to a @me.com or a @apple.com account cause right now it's an ugly hotmail account.
    I did read this page: http://support.apple.com/kb/HE40. But it is not helping me.
    When I change my e-mail to my @me account it gives an error. So what account should I use? Do I have to make a new one?
    Tristan

    I already got an iCloud account which is named the same as my Apple ID but I want to change the name of it to another e-mail account from Apple. So I need a new e-mail addres. Where can I make a new e-mail account? When I've got a new e-mail addres then I will use that in stead of my hotmail account.

  • How can i change the email address for apple id and icloud?, how can i change the email address for apple id and icloud?

    i had to change the email address to my apple id. now when ever i try to use imessage or the icloud, it wont let me because it is using the old email address. i cant change it on my phone and idk what to do on my computer!

    If the old ID is yours, and if your new ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • How Do You Change The Name Of A Note? And Why Do Notes Show In The Inbox?

    I created a note and can't change the name of it. Also why are the notes showing in my inbox?

    I'm not sure about a name change but they show up in your inbox when you have the option checked in Mail>Preferences>Accounts tab>Mailbox Behaviors tab.
    Select your account on the left of the screen if more than one.
    Hope this helps

  • When I go to settings messages on my iPhone. 3GS how do I change the number where it says send and receive

    Help me out

    You can't change the phone number for send and receive with iMessage on an iPhone.
    You can add or remove email addresses for send and receive with iMessage on an iPhone, but not the cell phone number.

  • How can I change the Y-axis (circular) grid spacing, in Polar Plot VI?

    When using Polar Plot VI, I need more control over the plotting parameters. This means tweaking the sub-VIs in various ways. What I need to do most is make the polar magnitude axis less busy, i.e. only draw circles every 10 instead of every 5 divisions, when using a range of 0 (outermost) to -80 (innermost).
    The magic 'magnitude axis subdivisions' variable seems to be generated in Calc Scale Specs sub-VI, and output as an array of clusters, but I can't quite see how it's created and from what.
    Please can anyone help me gain control over the number of magnitude division circles generated?
    Many thanks!

    I think if you go inside the Calc Increment.vi and modify the Increment output terminal it might change what you want to see. Try putting a multiply by 5 or ten into the case structure for when the log is false.
    Attachments:
    polar plot calc increment.jpg ‏90 KB
    modify calc increment.jpg ‏104 KB

Maybe you are looking for