How do I change the number format to the Indian-style comma separation?

So the default mode for Numbers is obviously the American-style comma seperation
ie. the number 123456789 will be displayed as: 123,456,789.
Does anyone know how to change this to accomodate the Indian counting system?
Specifically, to display 123456789 as 12,34,56,789.
Thanks!

Default language setting for Numbers will follow your System Preferences country setting. This will determine format for decimal separator. I've never checked for the Indian format in Numbers, but if your system country setting is India, you should submit Feedback to the Numbers Team via the Numbers menu and tell them about the mistake.
Jerry

Similar Messages

Problem with the number format in the graph axis with Report Generation Toolkit.

Hi!
I'm trying to use the Report Generation Toolkit to plot some graphs in Excel.
My first problem is that I don't know how to configure the number format in the Excel Set Graph Font.vi so that my numbers are correctly displayed in the graph's axis. The only given option is general (0,0) but this is not enough for me, my numbers can get really small so I need engineering notation or fraccional format.
Second: I also insert a table with the graph source data, but the numbers are not correctly displayed either: for example:
0,75 is shown as:
0,750000
but 1,25 is shown as:
1!250!000
My guess is I am making to much or wrong string to number conversions or Excel is getting it wrong but I can't find my way...
Can someone help me with this?
Thanks,
Isabel

Here is my VI, it's just a trial so it can look messy...
Thanks,
Isabel
Message Edited by Isa_pm on 01-22-2007 01:12 PM
Attachments:
Create report.vi ‏96 KB

Changing a number format

Hello,
How do you change a number format from double to pounds and pence. For example I have the number 27.85. I want to change it so it will read as ?27.85 OR ?27 and 85 pence?
Thankyou for your help in advance :)

are you just talking about printing the little pound symbol in front of the number?
If that's the case, you could just write something like this:
System.out.println("\u00A3"+ monies);where monies is your double (I'm not a brit, and I don't know if you folks have a pound symbol on your keyboards there).
If you know that with certain doubles that you will always be printing a pound symbol with them, you could always just write a method that will print whatever you have with a pound symbol in front of it.

How do I change a number that was international back to UK number so it permanently recognises it as UK not international? I've tried delete, reset factory settings, change the format of the number etc and nothing seems to work. Help!

I recently moved back to the UK and bought my iphone 4 with me. It is unlocked and works on the new contract that I have set up here in the UK. The problem I'm having is that some of the UK numbers that I had already had on the iphone in Korea as international UK numbers will now not work as they are still coming up as international numbers. This means it is costing me a lot to message or call these numbers. I have tried changing the number format various ways, deleting the numbers (although it still seems to remember them), resetting the phone, restoring the phone.
How can I succesfully change these numbers?
Any UK numbers I have added since changing the contract are working fine.
Thanks!

Do you happen to have Dial Assist on? This is in Settings>Phone. This is what helps the phone identify international numbers when dialing, based on location. See if turning that off/on makes a difference. Unless you are making a number of international calls, I believe this can be left off. See the User Guide http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf Page 49 has info regarding Dial Assist.

How do I change the number formatting within a Cell Table in Microsoft Word?

Hi, I was wondering if someone could help me out on an issue I've been having... I work for an accounting firm and we do a lot of financial statements.
I was wondering if we would be able to treat a cell table in Microsoft Word 2007 like I would a cell table in Microsoft Excel. Meaning, I would like to change the formatting of the numbers in the table to the "Accounting" (number) format so it
aligns by the decimal point and use the $ signs and () for negative numbers. We do use the link tables feature, however, most of our balancing pages just can't be done in Excel because of the way the text is written. It would be much harder to format
the text if it were to be typed in Excel. We have also tried creating an Excel sheet within Microsoft Word but it is the same as linking the tables... Again, a text formatting issue. The only option is to use tables within Word but how do we change
the number formatting to a "accounting" (number) format where the numbers would align with the decimal point and use () for the negative numbers. Is there ANY option for us to do this other than manually entering this information in using tabs?
If there are no options other than entering it in manually, please consider this as an option for your next software update. I believe that a LOT of people out there will be interested in this feature... My manager and I just attended a webinar on Microsoft
Advanced Word Tips Tricks and Techniques and 75% of the attending people had this question but no answer.
Thank you very much for your help!!!!!

Word does not really have number formatting for table cells. You can align cell contents on the decimal point, though, by setting a so-called decimal tab stop.
Option 1:
- Select the cells for which you want to do this.
- Display the ruler.
- Click the Tab box on the left hand side of the ruler until the box contains an inverted T with a dot.
- Click in the ruler where you want the decimal tab.
Option 2:
- Select the cells for which you want to do this.
- Click the arrow in the lower right corner of the Paragraph group on the Home tab of the ribbon.
- Click the Tabs... button in the lower left corner of the dialog.
- Specify a tab position in the box, e.g. 1.5".
- Select the 'Decimal' radio button under 'Alignment'.
- Click Set.
- Click OK.
You will have to type the numbers as they should appear, including the $ for currency and the ( ) for negative numbers.
Regards, Hans Vogelaar

How to override the NUMBER format in BEX?

Hi,
I want to override the number formats in BEX queries (Excel).
In the Query Designer -> Query Properties -> Value Display,
or in 3.x: Query Properties -> Display -> Number Format,
the setting "Display of +/- Signs" affects how the numeric values in Excel will be displayed. This setting seems to take effect after everything else is done.
I can change any cell formatting (pattern, border, color, etc.) except the number format. I have tried redefining Styles, assign different styles to the Result Area, setting up a default template, even Visual Basic (Sub SAPBEXonRefresh), nothing works, my settings always get overwritten by the query setting.
For example:
I am trying to assign the Number Format "Accounting", with a "$" sign in the far left of the fields, to the amounts in my workbook.
It should look like this: "$ (123,456.00)"
The results: my settings are replaced by the format "Currency" with the "$" sign.
" ($123,456.00)"
It must be due to that number format setting in the query designer.
I was hoping the number format setting in the query designer could be switched off. But apparently it is not possible. Not even the "Adjust Formatting after Refreshing" setting affects this behavior. It always takes effect.
Does anyone have any idea what could be done about it?
Thank you,
Vince

OK, I think I have just found the answer to my own question...
I had done something in the VB editor that created this whole problem. Now it is fixed and works as it should.
Thanks anyway.

Why Acrobat x professional is changing the text formatting specifically the font family and the font size of the text in my pdf on exporting it to Microsoft word file format ?How should i stop Acrobat x professional from doing that so that i get an exact

Why Acrobat x professional is changing the text formatting specifically the font family and the font size of the text in my pdf on exporting it to Microsoft word file format ?How should i stop Acrobat x professional from doing that so that i get an exactly same word file on exporting it from its pdf counterpart?

I was testing the preciseness & efficiency of Adobe acrobat x professional's doc conversion capabilities. As i have to take a document editing project in future which is going to need lot of pdf to word and vice versa conversions . What I did was I created a test word document converted into a pdf using a pdf maker in my word 2007 , Acrobat did convert the document from word to pdf keeping everything in the source file intact , However when i tried the other way round and attempted to convert the same pdf to word 2007 file format I lost my formatting ?So the font that I used to create the pdf are the ones taken from word 2007 which i believe is using the fonts that are installed in my computer. Any suggestions on how to preserve the formatting of the document after converting it from pdf to word file format?
Regards
Mike

Has iOS 5 changed the number format somehow?

Recently I tried to fill in some bank details of a client on my iphone and whenever I tried to fill in the sort code it kept removing the nought before any number, ie if I put in 35-05-06 it would put 35-5-6. Also, when I tried to put in the account no it kept adding commas after what it saw as thousands. I have never come accross this problem before and assume that the new ios5 update has caused this to happen. I have tried looking in settings to see if I can change the number format somehow but to no avail.
I just wondered if anyone else had encountered this problem and found a solution. I would be most grateful to any suggestions.

Dear Huntress.
I had done all that but no use.
Thank you so much for your response. Rgds.

How to make sure what material number format is the same in SRM and R/3?

Hi all!
I faced the following problem:
"Product does not exist in plant or it has been flagged for deletion". This error message occurs during shopping cart creation or during transferring purchase requisition from R/3 to SRM. It seems like SRM carries out some material checking in R/3 before shopping cart save and can't find out appropriate R/3 material. The only reason I can assume is different material number formats in SRM and R/3. Material number length is the same in both systems.
Thanks in advance,
Alexander.

Alex-
We experienced this problem just recently. Our situation involved trying to add a material to the cart from an internal catalog (CCM). As mentioned earlier their is a configuration setting to indicate the number of characters the "Product" (SRM terminolgoy) or "Material" (R/3 terminology) should be. We made our setting 18 characters (same length as field in R/3). The important thing to understand is that the material number is actually defined as a character field, not a numerical field so the length of the material "number" is critical for the system to accurately check the material. Do the following and see if you correct the error.
1) Go into transaction COMMPR01 in SRM, select the search tab and choose Material in the Find box, then click start. Choose the material you are experiencing the problem on and verify that the number of characters is the same in SRM as it is in R/3.
2) Next, go into R/3 and look at table entries in MARC for the material. This will show you all the different plants associated with the material.
3) Finally, create a cart and procure the material. If you get the error message go to the basic data of the cart and verify the location (plant) is one of the plants you found in step 2. If not, change the location to one from step 2 and check the cart.

How can I permanently change the date format from the American format to the UK's without having to constantly change it manually every time I start a new spreadsheet?

This is my first mac so I'm still getting my bearings with it. I've only used Windows programmes before. I can't understand why it's so hard to change the date format of the cells in Numbers to keep it showing the UK format. The system preferences of the mac show that it's in the correct region and has the correct date but this doesn't seem to transfer into the Numbers program. I was very impressed with the mac until I discovered this. If anyone knows how I can get the date to stay in the correct format without having to go through the process of altering it in the cell inspector everytime then I would be very grateful.

Numbers & most apps, especially those from Apple, use the date format you have set in System Preferences > Language & Text > Region. You can then choose UK from the Region drop-down list. Mine says Custom because I've defined things further as in the second screenshot.

I set up my iPhone through iCloud but assigned the wrong cell number to it so I am getting messages that don't belong to me but rather to my husband as I entered his cell number in there - how do I change that number to stop this from happening??

I set up my iPhone through iCloud but assigned the wrong cell number to it so I am getting messages that don't belong to me but rather to my husband as I entered his cell number in there - how do I change that number to stop this from happening??

Also, if you are sharing an Apple ID, you will get his iMessages.

How can I change the numeric format of the cursor coordinates display in LV 8.2

Since LV 8.0 or so the cursor display window of a graph indicator seems to be a tree control. I couldn't find where to change the numeric format of the numbers displayed in that control. What did I miss?

lecroy wrote:
Maybe I'm not clear on what your looking for but I just use a property node and route the raw cursor data out to what ever function I want to run on it, then display it in a seperate field. The nice thing with the property node is you can have multiple graphs linked together by one set of cursors all with different readouts.
Yes, of course that's an option and I guess I'll have to do it that way.
The point is that I converted a pre-LV-8.x program to LV 8.5. In the program I had used the coordinates display field in the cursor legend to display the position, just the was the cursor legend is supposed to be used, IMO. And in pre-LV-8.x days it was possible to customize the numeric format property of the cursor legend (either directly or by property nodes). It seems that with LV 8.x NI chose to use a treeview control for the cursor legend. With that 'improvement' the numeric formatting flexibility was lost since now the conversion to the string content in the cursor legend's treeview is happening somewhere 'under the hood'.
<rant> Why do they (NI) always try to 'improve' things (where nothing needs be improved) and sacrifice functionality on the way....? </rant>

How to convert exponent to number format

Hi,
how to convert exponent to number format.My column is in number and the data is in exponent format .for example data is 2.44705130197009E18 .when i do field name haveing this data like
select * from table name where filed name =2.44705130197009E18 ,field name is of number (20) data type .but i am not getting any data fectched .
your advice is at most appriciated .
Regards,
Suja

Example of what I was saying...
SQL> create table myexp (name number);
Table created.
SQL> insert into myexp values (2447051301970090001);
1 row created.
SQL> select name from myexp;
      NAME
2.4471E+18
SQL> col name format 9999999999999999999999999999999999999
SQL> select name from myexp;
                                  NAME
                   2447051301970090001
SQL>
The number you are seeing as an exponent is not just the number that is stored with lots of 0's on it, there's other information you are missing, so you need to change your format to see the true value.

How do I change my number for iMessage and facetime

How do I change my number for iMessage and FaceTime on my iPad mini

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
 Cheers, Tom

How can I change a number on my account?

how can I change a number on my account?

Log into your on-line MyVerizon account. Click on the blue More Actions under I Want To. Under Profile, click on Change Mobile Number and follow the prompts.

How do I change the number format to the Indian-style comma separation?

Similar Messages

Maybe you are looking for