How do I change the paper size in an existing Pages document?

How do I change the paper size on an existing Pages document?

So are your text box set to floating? You can tell that by looking in the Inspector>Wrap Tab when you select the text box.
If I had to guess I would say that the text boxes are floating and when you change the size of paper the text that you have in the main body area is shrinking so that it does require as many pages and you are losing the text boxes at the end. Is that correct? If so, they are still there, you just have to add page breaks to get to the pages that you lost and you should see them again.

Similar Messages

  • How do u change the paper size when using the Report Editor?

    i have an existing report layout on a letter size page (8.5 x 11), how do i change the page size to say (8.5 x 13) or legal size from within reports?
    when i try to extend the margin, it wont budge.
    any tricks for this problem?

    Hi,
    In the object navigator expand 'Papar Layout' node and double click on the
    'Main section' node. There you vill be able to change paper size.
    Vismantas

  • How do you change the paper size in numbers?

    somehow the default paper size in numbers is A4, i want to make it legal, how do i do it, numbers doesnt have "page set up" like pages. and i tried to change the default print size in the print center, still nothing happened. im really getting frustrated. help please.

  • How do I change the paper size to a custom size in the new Pages?

    Hi,
    I would like to be able to make some posters in different sizes. With the previous versions of Pages, I was able to customize the size of each document. In the new version it seems that I can only choose from a very small list.
    Does anyone know a way around?
    Thanks

    Do you have a dual layer burner connected (either internally or via FireWire)? If not, the option won't present itself.
    Also, you actually have to click on the round burn button so the dialog box showing the DL burner will present itself in the event you have more than one burner available on your system. See this link for an image of said dialog box:
    http://discussions.apple.com/message.jspa?messageID=4105837#4105837

  • How does one change the font size for folders and/or file lists in the Bookmarks Library?

    How does one change the font size for folders and/or file lists in the '''Bookmarks''' Library?
    Since the upgrade to version 9.0.1 of Firefox, the Bookmarks feature changes are confusing me. They seem to be confusing themselves as well. The list of bookmarks has changed. The font size is so small that my aging eyes cannot read it without fogging the screen with my breath. Some folders are out of alphabetical order (where I know they were previously good), and some are missing altogether (folders to which I frequently add references).
    As for missing or deranged files or folders, was there something that I should have done or now need to do to recover those after the upgrade (or before)?
    With regard to font size,
    1. there is no “Edit Bookmarks” or like option to edit the list in this version
    2. the “zoom” option in the “view” list of functions is greyed out when in “Show All Bookmarks” window
    3. expanding the browser window has no effect on font size
    4. “Preferences” settings for font size has no effect in that window either, including advanced settings
    5. “Help” offers none that I can find.
    Can any of you Help?!?

    Maybe this extension helps:
    *Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

  • How can I change the window size of iTunes?  Used to be easy before installing Mavericks.

    How can I change the window size of iTunes on my iMac?  Used to be easy before installing Mavericks.

    If you want to make the itunes tab so you can see the dock
    you press the
    esc
    button if your in full screen mode
    if you want to get into full screen mode you press the arrows facing away from eachother in the top right corner
    there is another way to get to the normal tab if your in full screen
    make the curser go right up to the top of the screen and it will show the apple tab
    it will have two arrows facing together highlited in blue
    if u tap that it will take you to the normal tab

  • How do I change the font size of a document when I PRINT?

    How to I change the font size of a document when I print it?

    To specifically and fully answer your question, no, you absolutely cannot change the “font size” as a function of print.
    First of all, there isn't a single “font size” associated with a PDF file (and we assume you are referring to a PDF file since this is an Acrobat forum).
    Secondly, PDF is a final form file format meaning that the content is static in terms of location, size, etc. on the page. To change the point size of any particular text, you really need to go back to the source document and make the changes there.
              - Dov

  • How do you change the default size of the print batch size for mail merge in Publisher 2010?

    I appended this question to another thread with the same topic but have not received a reply, so I'll try with a new question. Publisher 2010, when doing mail merge, will only merge and print two records at a time. How do you change the default size of
    the print batch size? This is for a 4 page document, 8 1/2 x 11, printed two sides on 11 x 17. I've tried all the suggestions that were in the other thread. The response that was marked as the answer by the moderator is incorrect and does not work. Nothing
    suggested in that thread works. A registry fix that worked for Publisher 2003 won't work because the print batch size key does not exist in the registry for Pub 2010. At least not that I can find. Printing to an XPS document doesn't work. It asks for a filename,
    prints 2 records, asks for new file name, prints 2 records, asks for new file name, and so on. The same for printing to a PDF document. Merging to a new Pub document doesn't work. When I print that job every other sheet is turned over. I.e., sheet one has
    pages 1 & 3 on top, next sheet has 3 & 4 on top, and so on. This makes it impossible to run them through the folder. The same thing happens when I print that complete merged document to XPS or PDF. I have the latest drivers installed for our printer, a Toshiba
    2500C copier/printer connected via network. What do I need to do to to change the batch size to something reasonable, like 100 records?

    It's been two weeks since I posted this question. What does it take to get an answer? I cannot believe it's being ignored, nor can I believe that someone in MS doesn't have an answer.

  • How do I change the font size and color in a text box?

    How do I change the font size and color in a text box?

    Really frustrating to find the first time but simple once you figure it out. I think I spent hours trying to find this. Simply right click on a blank spot in the toolbar up top and select Properties Bar. There it is! The available properties will change depending on whether you have the content (text) selected or the box itself.
    I haven't found a way yet to make it show up as a regular part of the toolbar. It floats around and gets in the way so I don't leave it on and then have to open it again when I need it. Again - frustrating; but at least it's there!

  • How do you change the ont size

    How do you change the font size for one word ?

    Basically, you need to wrap the word in a <span> tag, and apply either a class or an inline style to the span. Using a class is better because you can reuse it in other pages, or other parts of the same page. Also, changing the font size in the class will apply the changes to all instances of the class. With an inline style, you have to change each one individually.
    To wrap a word in a <span> tag, select the word, then press Ctrl+T (Cmd+T on a Mac) to bring up the Wrap Tag dialog. Type "sp" (without the quotes), and press Enter twice. Then create a class using the CSS Designer. Apply the class to the word by selecting it again, and select the class from the Class drop-down menu in the Property inspector.
    To create an inline style, select the word, and click the CSS button on the left of the Property inspector. Select the font size you want from the Size drop-down menu. If the size you want isn't listed, just type the value in the Size field.

  • HOW DO YOU CHANGE THE WINDOW SIZE OF EBUSINESS SUITE ON STARTUP

    HOW DO YOU CHANGE THE WINDOW SIZE OF EBUSINESS SUITE ON STARTUP
    How do you change the window size for Ebusiness Suite after you log in. Currently it displays at 100% of the screen. I want to set it smaller, at some %

    I don't know if there is a way to set this. Some user's may prefer different sizes of window, depending on their job duties. For example, we have 170 Systems document management integrated with purchasing and payables so users shrink the Oracle window to fill about 60% of the screen while 170 uses the remaining 40% to display the scanned document.

  • How do you change the font size?

    This is a rather simple question.
    How do you change the font size in flex builder 2?
    In the preferences for flex>editors there is no option to
    change any font settings.
    i'm sitting quite far away from my LCD and can hardly make
    out the text.

    Window -> Preferences -> General ->Colors and
    fonts

  • How do I change the template size in pages on my iPad

    How do I change the template size in pages on my iPad I've looked every where for the answer.
    Please help I'm trying to make a program 

    You can't. Those are functions of the the template.

  • How do I change the font size in iPod touch with iOS 6.1.3?Thanks

    How do I change the font size in iPod touch with iOS 6.1.3?Thanks

    I have an custom app that I want to change the size of the fonts cause the app font size is too long so i cannot see the whole sentence. thanks.

  • How can you change the font size in the application and system headers?

    How can you change the font size in the application and system headers?  I searched the system and finder prefs to no avail.  Changing the screen density is not a good option.
    Thanks

    I downloaded Tinkertool.  Found the font section and increased the size of most selections.  The only thing that changed that I can see is the window label.  The apple line, bookmarks line, the tool bar in safari are all the same---font size of about 4.  Found the finder "show view options" but that didn't seem to change anything either.  I'll keep working.  Restarted all apps after changes as well.

Maybe you are looking for

  • SSO Authentication Audit Information for Partner Apps ?

    Hi, Is it possible to get Audit Information to show when a users has been authenticated by SSO for a Partner Application ? If I look at orasso.wwsso_audit_log_view I can see when a user has been authenticated and a row for Portal and each Partner App

  • Getting codec error in  a fcp project NEED HELP ASAP

    All of my other projects seem to be working fine, but one project in Paticular when I try to export using "quickime conversion" I get a codec error....as soon as I hit enter...therefore I cannot get it to convert to a quicktime file. I went an checke

  • MacBook Pro 2.2GHz -- which exactly Intel CPU is in there?

    I've been reading the wikipedia on the differences and details on the Core Duo and Core 2 Duo CPUs and it made me thinking what model number of Intel CPU have I got in my system? I've checked the specs both on the product pages as well as in the supp

  • HT2330 i can't remember my password so i am unable to update my computer

    my brother give the powermac and i put a pass word on it and i forget the password can you please help me

  • I can't access my account

    At times I can't access my account in iTunes for Windows. at times it'll let me download and sometimes freezes or take forever like not responding in both situations. I need to straighten that out. Please help me. Thank You.