How do I change the settings on my ipod so that it plays continuous music. Right now, it plays the same song over and over, even if I select the shuffle icon. It used to show the continuous play icon, it doesn't anymore.
How do I change the settings on my ipod so that it plays continuous music. Right now, it plays the same song over and over, even if I select the shuffle icon. It used to show the continuous play icon, it doesn't anymore.
Right click on a movie(in iTunes), and click "get info" then go to album artwork and add the artwork that you want...
-Messymeese
Similar Messages
-
I have an Ipod Touch that is in recovery mode right now. I hooked it up to iTunes, and followed the steps to restore it, but it will only restore about a quarter of the bar. How do I get it to load past that certain point?
- Reboot the computer
- Try another USB port and cable
- Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try on another computer
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I am unable to find a way to get iTunes U to play all audio files one after the other without me manually playing each one of them.
Best I've managed is to create a smart playlist in iTunes with the album set to the title of the course. Have the smart playlist update automatically so that any new postings from the course are included within the playlist. After that you should be able to play the playlist and have all the audio files play one after the other. Hope it helps!
-
How do I change American settings in my ipod nano to UK ones... to enable UK radio stations?
I went to Apple store and they managed to get the UK settings back and along with it the radio frequencys but when I syncked ipod back at home, the same happened again and the frequencys are gone.
Settings > Radio > Radio Regions > Europe
-
Someone changed the settings on my iPhone so that I can no longer update or add apps. The icon no longer appears. Can someone please tell me how to add that back?
I should have added that the iTunes app is not displayed on my phone in order for me to add the apps.
-
how do i change my settings for iMessage on an iMac? I want to be able to use multiple email accounts and cell number as well.
Open Messages and choose Preferences from under the menu bar program's name and add source accounts to use.
-
I had my iphone 4s synced to itunes on my work laptop. The IT group at work stripped out that installation and will not allow me to reinstall. My iphone insists it has to sync to my work laptop itunes. How do I change iphone settings to look at an itunes installation on my personal laptop?
dcotejr wrote:
I had my iphone 4s synced to itunes on my work laptop. ... How do I change iphone settings to look at an itunes installation on my personal laptop?
You cannot.
By Design the iPhone can Only Sync to One iTunes Library at a time. -
How do I change default settings in the author field when I edit or insert a comment in a PDF?
How do I change default settings in the author field when I edit or insert a comment in a PDF?
Generally it gets this info from the Identity in the preferences. Unfortunately, I know of no way to change the Login Name that shows up in the comments. I need to look at newer versions of Acrobat on other machines, this is AA8.
-
My inbox used to show the sender for each message and now it does not...how do I get it back to where it was?
Right click the heading at the top of the message list and select From from the list of options.
-
how do I change system settings so that users are not required to enter the mac's admin pw in order to join a wifi network?
Right now my macbook pro requires an admin password before connecting to a new wifi network. In other words when a user that is not an admin tries to connect to a new wifi network the pop up displays indicating that it is locked and an admin password is required.
Is there a way to remove this restriction so that a non admin can connect to wifi without the mac's admin password.You can enable / disable this option in System Preferences:
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab > Require administrator authorization to: Change networks -
I live in Spain and receive all i store products ( books/music ) from the Spanish stores but require English store products How do I change my settings??
Settings > Stores (or iTunes and App Store) > Apple ID > View Apple ID > enter password > Country/Region
-
When I click on a hyperlink it automatically opens it up in a PDF or Adobe Acrobat. How do I change my settings so that when I click on a link it opens it up in a new web page like it is supposed to?
Install this Add-on: https://addons.mozilla.org/en-US/firefox/addon/open-link-in-new-tab/
-
Help. My ipod nano is stuck on repeat. It repeats the same song over and over and wont play songs on the same album consecutively. How do I fix this
Hey cemccarty,
Thanks for the question, and welcome to Apple Support Communities.
The option to turn off repeat will depend on your iPod nano model. Here is the information for the latest model, the iPod nano (7th generation):
(click to view larger images)
via page 18 of manuals.info.apple.com/en_US/ipod_nano_user_guide.pdf
If you have an earlier model of the iPod nano, see the relative user guide from this page:
Apple - Support - Manuals
http://support.apple.com/manuals/#ipod
Thanks,
Matt M. -
Recently I have been experiencing my downloaded videos and online vids taking a long time to load and when they do, they will only play for a few seconds at best and you have to hit the play icon over and over. Never had this problem before with the 20 plus vids I have any suggestions would be appreciated
I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!! -
I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully under me?
The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.
Maybe you are looking for
-
Classification view in Material Master
Can any one tell me , how to create a Classification view using program or function module. I just wanted to create a Classification views in MM01 transaction . is there any function module there to create the same ? if BAPI_OBJCL_CREATE is the FM ,
-
What kind of CD-R should I use?
I've recently had problems burning CD's from iTunes . . .the CD's seem to burn correctly, but when I insert them into one of several DVD players, they skip, pop and do other weird things. (Burning DVDs from iDVD runs smoothly.) I have the original dr
-
My text fields will not expand
I have a suggestion form that i created in adobe livecycle. The text fields will not expand when there is more text than what fits in the box. A scroll bar comes up when there is more text than what can fit, but this will not do. I have the 'expand
-
Hi I need to develop a scenario like invoice idoc coming from the sap. that idoc we have to send it to the particular customer depending on customer no. we have 1000 customers. how the xi know's invoice is particular customer. if u have any idea plea
-
AQ and JMS - Oracle XA exception when trying to read message
I'm trying to setup Oracle AQ as a foreign JMS provider. I've setup the DipsAQXAQueueConnectionFactory and DipsAQDestination in the JNDI of my weblogic server according to the sample posted by Eric Ma. This works ok and prints out the following on se