How do i change the size of the flexible space in tool bar

if the feature, "flexible space", to customize the tool bar is truly "flexible", then how do i change the size of it?

still doesn't make sense to me. this is what i've done...first of all, i installed FF4 and didn't like it. but i did play around with some of the toolbar settings to try to get rid of the new "add-on bar" at the bottom. so i went back to FF3.6 and continued to play with the toolbar settings. i put the google search in the menu bar, but wanted to space it to the left, off the right margin. that's when i discovered the "flex space". you can indeed put the flex space in the menu bar to shift an item (button OR google search box) to the left or right. where i run into an issue is, in order to shift an item from, let's say the far right margin to the center, i would have to insert multiple flex spaces or i could also use the other "space". although, the "space" is two or three times as wide as the "flexible space". maybe the trouble that i'm having is the name"flexible space" which seems to imply that item has a flexible width. both "flexible space" and "space" do exactly the same thing, except "space" is wider than "flexible space". am i right? did i miss something? here is a screenshot to illustrate.

Similar Messages

  • How do you change image size in the title window?

    I just changed operating systems to Windows 7, which meant that I had to re install Premiere Pro CS4. I am now working on a 64 bit system. Might not make any difference, but thought I would give you the specifics just in case.  When I pull up the title window to add a title to my clip, the image is about the size of a postage stamp. How do I increase the size of the image in that window?

    Thank you again for responding Hunt. I did find out what what was happening.
    I had to reinstall the program on my computer. I just upgraded to Windows 7, and I now have a 64 bit system. When I booted up PPCS4, I assumed that my settings would be the same as they were before when I had Vista installed and didn't bother to check them when I started a new project. Well, they were not. I also added a TV tuner card to my computer. I now can watch HD TV on my computer. I suppose that it is possible that somehow PPCS4 noticed that, and set my default settings to HD, rather than NTSC DV. I just merrily went along clicking the OK button and started editing. When I start a new project now, I select NTSC DV and the Title window works just fine, and exactly the way I expect it to.
    I just received Jeff Bellune's book Adobe Encore DVD 2.0 in the mail and will be totally immersed in Encore studies today. With all of his children, I don't see how he had time to write it, but I'm glad that he did. I also ordered a book entitled Designing Menus with Encore DVD. I know that it was written for an earlier version than CS4, but I will trust what you said about that. Many things are the same with some minor variations due to upgrades in the program. The basic ideas don't change, but how you accomplish them can, and usually do over time.
    Terry Lee Martin
    Date: Mon, 17 Aug 2009 16:04:16 -0600
    From: [email protected]
    To: [email protected]
    Subject: how do you change image size in the title window?
    Welcome to the forum.
    That is an odd one. The Title should be the same Frame Size as your Project/Sequence. What is it's Frame Size? Also, are you perhaps doing a Title based on an older Template, that was done for a different Frame Size?
    What happens if you choose Title>New Title>Default Still?
    Good luck,
    Hunt
    >

  • How do I change font size on the safari tool bar

    How do I change font size on the safari tool bar

    You can't in Safari.
    However you CAN with Firefox and the add-on called Theme Font & Size Changer, also include NoSquint and set a global web page zoom level a bit higher, say 150%.
    NoSquint has buttons on the tool bar to increase/decrease each websites size AND IT REMEMBERS IT!
    Under the Tools Menu > Customize you can add more toolbars as well, but they have to have something in it of course.
    (note: the green with yellow type is a person you can add from thousands of choices, it's not the default look of Firefox)
    So this setup, although it may appear large here compared to Safari, is fine on my 17" when sitting back about 3-4 feet, takes up about 1/6th of the screen, so I'm not hunched up close, and I have a lot of screen real estate to play with anyway.

  • For the life of me, I can't find out what size a photo is in terms of inches or how to change the size of the photo[s] so I can print them. I think I read somewhere to click edit, then click adjust. Nothing there about sizing.

    For the life of me, I can't find out what size a photo is in terms of inches or how to change the size of the photo[s] so I can print them. I think I read somewhere to click edit, then click adjust. I don't see anything about re-sizing when I click the adjust tab: only saturation and tint levels. Thank you.

    With respect to digital images, there really is no size in inches. The size is given as number of pixels horizontally and vertically. In iPhoto '09 you click the little "i" inthe lower right side of the window and it will display information related to the selected photo, including the pixel dimensions. I do not have iPhoto '11 installed so I don't know if it is the same there.
    In some applications, such as preview, it has something additional called Dots per Inch (DPI) which you would think would allow you to convert the pixel dimensions to inches. It is not a real thing, though. The DPI is determined by how large or small you have chosen to print your photo and the capabilities of your printer. 
    There is also something called Aspect Ratio, which is usually expressed in inches x inches such as 6x9 but that doesn't mean the size on the screen or when printed is 6x9.  It is the ratio of the pixel dimensions.  When cropping your photos, you will have several standard aspect ratios to choose from plus any custom ones you create.
    In iPhoto '09, after you choose Print, in the Print Setting window are the settings for the size you want the photo printed. You want to shoose a setting with the same aspect ratio of your photo. Otherwise, iPhoto will resize and/or crop your photo to fit the size you have chosen. 

  • How to change the size of the force quit window?

    When I open the force quit window, it fills my entire screen, and it is larger than the screen of the TFT monitor that I am using from time to time. How can I change its size back to original? The window is not resizable by dragging its border or clicking the green plus button in the title bar.
    I don't know how the window got this size in the first place. All I know is that it happened during a crash where I closed a lot of other windows and where I accidentially clicked the green plus button of the force quit window instead of the red x.

    Try rebuilding your Finder prefs...
    Go to Finder "Go" menu hold the option key and choose Library. Then go to Preferences and trash these files:
    com.apple.finder.plist
    com.apple.sidebarlists.plist
    Then, restart, or log out and in again.
    (You will have to reset a few finder prefs the way you like them.)

  • How to change the size of the titel of  a picture in a diashow

    please answer the question.
    how to change the size and the possition of the titel of  a picture in a diashow

    You need to select it.  Copy that selection to a new layer, and use Free Transform to resize it.
    http://www.youtube.com/watch?v=qWpAGmwhllQ
    http://www.youtube.com/watch?v=Bi4jJnYLkUA

  • How to Change the Size of the Parameter Form in Report6i

    hi
    Does any one know how to change the size of the "PARAMETER FORM" in Report6i.

    Hi,
    You can change it in the "Parameter Form Window" property of the Report Object.
    In the object navigator, select the Report object and open its property palette. Under "Parameter Form Window" you can change the "width" and "height" properties.
    Regards,
    Siva B

  • How to change the size of the caret in a JTextPane

    I have text of different font sizes and the default caret height is the height of the text with the maximum font size. How do I change the caret height so that it matches the height of the text with the specified font size ?

    This has been a real pain in the butt to figure out, but I think I finally got it. If you create your own caret (subclass of DefaultCaret) then you override its paint() and damage() methods. I was having all kinds of problems with this though. I was getting pieces of carets left behind when I moved with the arrow keys, etc... from the helps I found. The arrow keys were my big problem.
    I think I finally figured out that the damage() simply does need to specify an area a little bigger than the old caret so it can blank it out. Then I think others had a logic problem, and Sun does not make this problem clear. What happens it that I think repaint() calls paint() who then uses the bigger x, y, height and width parameters that got set in damage(), which was causing my problems because the damage size was bigger than the size I wanted to create my caret with. What I do is figure out my area from the font I am using (another trick) and make them (the charWd and charHt) variables class variables. I calculate them in damage, use a bigger area to blank out my old caret in damage, and then used the correct caret size I calculated in damage() in paint(), instead of the rectangle values that seem to get passed from damage() to paint(). That was the problem in other examples.
    Here is my code:
    run with java caretPain
    run with java caretPain -1 to see my fixed version
    run with java caretPain -2 to see some problems
    // written by: Stan Towianski
    import java.awt.*;
    import java.awt.event.*;
    import java.util.Hashtable;
    import java.util.ArrayList;
    import javax.swing.*;
    import javax.swing.text.*;
    import javax.swing.event.*;
    import javax.swing.undo.*;
    import javax.swing.plaf.basic.*;
    import javax.swing.text.*;
    import javax.swing.plaf.*;
    import java.net.URL;
    import java.io.*;
    import java.beans.*;
    public class caretPain extends JFrame {
    static caretPain CRTP2;
    JPanel contentPane;
    JTextPane textPane;
    JTextPane textPane2;
    JScrollPane scrollPane;
    JSplitPane splitPane;
    String newline = "\n";
    static final int MAX_CHARACTERS = 300100;
    static int FrameWidth = 500;
    static int FrameHeight = 300;
    String caretType = "blockOutline";
    static int useSpecialCaret = 0;
    DefaultCaret useCaret = new MyCaret();
    public caretPain() {
    textPane = new JTextPane( new DefaultStyledDocument() );
    textPane2 = new JTextPane( new DefaultStyledDocument() );
    if ( useSpecialCaret == 1 )
    System.out.println( "using special caret 1" );
    textPane.setCaret( useCaret );
    else if ( useSpecialCaret == 2 )
    System.out.println( "using special caret 2" );
    textPane.setCaret( new WsCaret() );
    textPane.setCaretPosition(0);
    textPane.setMargin(new Insets(5,5,5,5));
    scrollPane = new JScrollPane(textPane);
    textPane.setPreferredSize(new Dimension(FrameWidth, FrameHeight));
    JScrollPane scrollPane = new JScrollPane(textPane);
    //Create a split pane for the change log and the text area.
    splitPane = new JSplitPane( JSplitPane.HORIZONTAL_SPLIT,
    textPane, textPane2 );
    splitPane.setOneTouchExpandable(true);
    //Add the components to the frame.
    contentPane = new JPanel(new BorderLayout());
    contentPane.add(splitPane, BorderLayout.CENTER);
    setContentPane(contentPane);
    class MyCaret extends DefaultCaret
    int charWd = 30;
    int charHt = 30;
    // draw the caret
    public void paint(Graphics g)
    System.err.println( "entered MyCaret.paint()" );
    if ( ! isVisible() )
    System.err.println( "exiting because not visible" );
    return;
    try {
    JTextComponent c = getComponent();
    int dot = getDot();
    Rectangle r = c.modelToView(dot);
    System.err.println("caret: text position: " + dot +
    ", view location = [" +
    r.x + ", " + r.y + "]" +
    newline);
    g.setColor(c.getCaretColor());
    //g.drawLine(r.x, r.y + r.height - 1, r.x + 14, r.y + r.height - 1);
    System.err.println( "caretType =" + caretType ); //+ " component =" + c.toString() );
    if ( caretType.equals( "blockOutline" ) )
    g.drawRect( r.x, r.y, charWd, charHt );
    else if ( caretType.equals( "block" ) )
    g.fillRect( r.x, r.y, charWd, charHt );
    else if ( caretType.equals( "bar" ) )
    g.drawLine( r.x, r.y, r.x, r.y + charHt );
    catch (BadLocationException e) {
    System.err.println( "bad caret loc" + e);
    // specify the size of the caret for redrawing
    // and do repaint() -- this is called when the
    // caret moves
    //protected synchronized void damage(Rectangle r)
    public synchronized void damage(Rectangle r)
    System.err.println( "entered MyCaret.damage()" );
    System.err.println("caret.damage(): text position: " + getDot() +
    ", view location = [" +
    r.x + ", " + r.y + "]" +
    newline);
    //FontMetrics fm = g.getFontMetrics();
    //System.out.println( "textPane getfont =" + textPane.getFont() );
    //System.out.println( "\n\n read in attribs font size =" + textPane.getInputAttributes().getAttribute(StyleConstants.FontSize) + "\n\n" );
    //int ii = Integer.parseInt( (String) textPane.getInputAttributes().getAttribute( StyleConstants.FontSize ) );
    int ii = Integer.parseInt( String.valueOf( textPane.getInputAttributes().getAttribute( StyleConstants.FontSize ) ) );
    //System.out.println( "textPane input attrib font size =" + ii );
    Font f = new Font( "ff", Font.PLAIN, ii );
    //System.out.println( "textPane input attrib font =" + f );
    FontMetrics fm = getFontMetrics( f );
    //FontMetrics fm = g.getFontMetrics();
    //FontMetrics fm = getFontMetrics( textPane.getInputAttributes().getAttribute( StyleConstants.FontSize ) );
    //MutableAttributeSet inputAttributes = getInputAttributes();
    //String fs = textPane.getAttribute( "FontSize" );
    //System.out.println( "\n\n read font size =" + textPane.getCharacterAttributes().getAttribute(StyleConstants.FontSize) + "\n\n" );
    charWd = fm.charWidth( 'k' );
    charHt= fm.getHeight();
    //System.out.println( "font width =" + charWd + " font height =" + charHt + " font =" + fm.toString());
    if ( r == null )
    System.err.println( "caret.damage() return on rectangle == null" );
    return;
    x = r.x - 2;
    y = r.y - 2; // + r.height - 2;
    width = charWd + 4; //textPane.getColumnWidth();
    height = charHt + 4; //textPane.getRowHeight();
    System.err.println("caret.damage(): set caret width, height, x, y =" + width + "," + height + "," + x + "," + y );
    repaint();
    //repaint();
    public class WsCaret extends DefaultCaret {
    transient private int[] flagXPoints = new int[3];
    transient private int[] flagYPoints = new int[3];
    public WsCaret() {
    this.setBlinkRate(500);
    public void paint(Graphics g) {
    if(isVisible()) {
    JTextComponent component = this.getComponent();
    TextUI mapper = component.getUI();
    Rectangle r = null;
    try {
    r = mapper.modelToView(component, this.getDot());
    catch(BadLocationException exc) {}
    //System.out.println( "rect r =" + r.toString() );
    //g.drawLine(r.x, r.y, r.x, r.y + r.height - 1);
    //g.drawLine(r.x+1, r.y, r.x+1, r.y + r.height - 1);
    g.drawRect( r.x, r.y, 10, r.height );
    Document doc = component.getDocument();
    if (doc instanceof AbstractDocument) {
    Element bidi = ((AbstractDocument)doc).getBidiRootElement();
    if ((bidi != null) && (bidi.getElementCount() > 1)) {
    // there are multiple directions present.
    flagXPoints[0] = r.x;
    flagYPoints[0] = r.y;
    flagXPoints[1] = r.x;
    flagYPoints[1] = r.y + 4;
    flagYPoints[2] = r.y;
    flagXPoints[2] = (true) ? r.x + 5 : r.x - 4;
    System.out.println( "going g.fillPolygon" );
    g.fillPolygon(flagXPoints, flagYPoints, 3);
    protected synchronized void damage(Rectangle r) {
    if (r != null) {
    this.x = r.x - 4;
    this.y = r.y;
    //there must be a better way to doing this, but for now you
    //just increase the width so that it will cover the new caret's size
    this.width = 20; // the original width is 10
    this.height = r.height;
    //this.height = r.height + 20;
    //this.height = 10;
    repaint();
    //The standard main method.
    public static void main(String[] args) {
    if ( args.length > 0 )
    System.out.println( "found arg so will use special caret." );
    if ( args[0].equals( "-1" ) )
    useSpecialCaret = 1;
    else if ( args[0].equals( "-2" ) )
    useSpecialCaret = 2;
    else
    System.out.println( "found no arg so will standard caret." );
    System.out.println( "give arg: -1 to get Stan\'s working caret" );
    System.out.println( "give arg: -2 to get another example\'s caret" );
    try
    CRTP2 = new caretPain();
         catch (Exception ex)
    System.out.println("Error creating CRTP2: " + ex);
    ex.printStackTrace();
    System.exit(0);
    CRTP2.addWindowListener(new WindowAdapter() {
    public void windowClosing(WindowEvent e) {
    System.exit(0);
    public void windowActivated(WindowEvent e) {
    CRTP2.textPane.requestFocus();
    CRTP2.setTitle( "This is my title you" );
    CRTP2.pack();
    CRTP2.setVisible(true);

  • How to change the size of the thumbnails in Firefox 33?

    In Firefox 33, the thumbnails on the new tab are huge. i want to see 9 but i only see 3. How can I change the size of the thumbnails to restore the way they llok like in earlier Firefox versions?

    It works for the case only when I open a new window, but doesn't remember it for any new tab I open later.

  • How to change the size of the scrollbar in JScrollPane?

    I set a jtable in the jscrollpane,but the table is very small,so I want to change the size of the scrollbar in the jscrollpane.How can i do?Please help me,Thanks.

    Dropping and re-creating the table is by far the best way (of course you need to unload the table's data to a flat file with ttBulkCp first and then reload it again afterwards).
    a second option is to drop the column and re-add it with the new size but you still need to preserve the data first and put it back afterwards and this is harder for a single column than for a whole table. Also, if you are using replication you should exercise care when using ALTER TABLE to ensure iall replicated copies of the table maintain the same physical structure.
    Chris

  • I am shooting with a Nikon D60 on Fine Format and unable to print larger than 11x14.  I have been able to print larger pictures.  I am told iPhoto reduces the size of the file when uploaded. Is this true? If so how can I change this?  I need 16x20's

    I am shooting with a Nikon D60 on Fine Format and unable to print larger than 11x14.  I have been able to print larger pictures.  I am told iPhoto reduces the size of the file when uploaded. Is this true? If so how can I change this?  I need 16x20's

    I am shooting with a Nikon D60 on Fine Format and unable to print larger than 11x14.  I have been able to print larger pictures.  I am told iPhoto reduces the size of the file when uploaded. Is this true? If so how can I change this?  I need 16x20's

  • How do I change the size of the tools and the text for the menus in Photoshop?  I need a magnifying glass in order to make out what they are.

    How do I change the size of the tools and the text for the menus in Photoshop?  I need a magnifying glass in order to make out what they are.

    Okay, I've figured it out, so I'm going to answer my own question in hopes that it may help anyone else that would like to actually be able to see what they're doing when using Photoshop CC 2014 on a high resolution screen.
    1.  Open Photoshop.
    2.  Select Preferences from the Edit Menu, then select General.
    3.  Change the HUD Color Picker to Hue Strip (Medium).
    4.  Select Interface from the Preferences menu on the left side of the dialog box.
    5.  Change the UI Font Size to Large in the Text area of the Preferences dialog box.
    6.  Select Experimental Features from the Preferences menu on the left side of the dialog box.
    7.  Select Scale UI 200% for high-density displays (Windows only).
    8.  Click on OK, then Exit/Quit Photoshop.
    9.  Open Photoshop and everything should be readable.

  • How do I change the size of file menu's and tool icons in Photoshop' opening page.

    How do I increase or change the size of file menu's and tool icons on the opening page/worksheet of Photoshop? The File Menu drop down commands read properly at a comfortable size. I am not sure how I accomplished this, but everything I have tried has no effect on the other page items.

    Hello, you can change most of Photoshop's interface text by going to preferences>interface>UI font size.
    For the size of the top menus and the whole interface, there is no function to do that for the moment. I suggest to vote on this thread: http://feedback.photoshop.com/photoshop_family/topics/problem_with_hi_res_monitors

  • How can I set the size of the font so I don't have to change every new word?

    How can I set the size of the font so I don't have to change every new word?

    In what application?

  • How do you change the size of the font in the menu bar running Maverick?

    On Maverick, how do you change the size of the menu bar font?

    Sent my feedback already:
    Thank you for your feedback on the MacBook Pro.
    We cannot respond to you personally, but please know that your message has been received and will be reviewed by the MacBook Pro Team. If we need to follow up with you on your ideas for improving the MacBook Pro, we will contact you directly.
    We appreciate your assistance in making the MacBook Pro a great computer.
    MacBook Pro Team
    Apple

Maybe you are looking for

  • Why is my image icon not showing up for subscribers?

    I'm using podbean which produces the itunes feed and auto-submits it. You can see the icon when you visit the itunes page on the web - https://itunes.apple.com/us/podcast/bloggersareweird/id589296259 but when you actually subscribe via iTunes the ico

  • Crystal Report Universe Connection

    Hello, I have a Crystal report developed based on Universe as the data source. Say this report is in Dev environment. Suppose I need to promote this report to Test environment to UAT or production then how is it possible?     I have used import wizar

  • Applescript process message body from mail rule help please

    Would someone be kind enough to help me figure out how to do this?  I've been reading for hours on other posts and I can't get this to work. Here is an example: I would like to set up a mail rule to run an applescript that searches the body of the em

  • Default Value of status field been shown as "Open"

    Hi All, I am facing some error regarding the status field in service request record type.The status field is showing as "open"when i had created a new service request but its not been reflected under service request detail page eventhough its not bee

  • Using Ipod Photos

    I already have photos on my ipod from a different computer. I want to import my new photo from my new computer onto my ipod, but it shows up saying. Are you sure you want to enable photo support? It says photos and albums on my ipod with be replaced.