How do I change the speed of the Final Cut Pro X "Ticker" Title option?

I am moving from iMovie to Final Cut Pro X.  I used to use the "ticker" title option all the time in iMovie, but when I utilize it in Final Cut Pro X, it scrawls really slow and only shows the first line of text before the video ends.  How do I adjust the speed of this option?

This Motion template effect isn't very useful at the moment.
Sadly, the only way of changing the speed is to modify the effect in Motion.
The speed is designed to get the word 'Information' at the default size and default typeface across the screen over the duration of the clip. If you add more text, or change its size, the text will not move off the edge of the screen by the end of the duration of the generator.
Alex4D

Similar Messages

  • How to change the white balance in Final Cut Pro?

    What is the best way to change the white balance in Final Cut Pro? I have some clips which are to green. I would like if possible something which might resemble the Camera Raw dialogue in Photoshop. Any way of measuring color (RGB values)?

    There is some specific help in this trainng book:
    http://www.amazon.com/Apple-Pro-Training-Correction-Studio/dp/0321635280/
    When using Color Corrector 3-Way to correct for a green tint, the bullet points are something like this:
    1) After loading the clip into the Viewer and applying the CC3W filter to the clip, open your scopes and move the window so you can see the Viewer (with the CC3W tab open) and the scopes
    2) First, if necessary, adjust the white and black levels using the video level sliders below the white and black color wheels (I use the slider above the scopes to make the trace in th4 scopes as bright as it will go without blooming)
    3) Looking at the Parade scope, the idea is to balance the whites, mids, and blacks on each color display (red, green and blue). So you watch the Parade and drag the dot that is in the center of each color wheel (starting with the whites) away from the color of your tint (in your case, green). Drag the dot until the highest portions in all three Parade displays are as even as you can make them
    4) Then do the same with the mids, using the Mids color wheel, moving its dot away from green
    5) Do the same thing with the blacks
    6) Double check the image on an external video display that is properly adjusted using color bars from Final Cut
    NOTE: This short reply is not sufficient to fully explain this technique, and you really need to understand Color Theory before doing this anyway. That's why I recommended the training book.

  • How do I revert to original footage in Final Cut Pro X version 10.0.9, for some reason I have lost some audio in my timeline and would like to start again but cannot get the original footage?

    How do I revert to original footage in Final Cut Pro X version 10.0.9?
    For some reason I have lost some audio in my timeline and would like to start again but cannot get the original footage?
    Only the edited version which is no good without the audio?
    Please  Help

    What format is your problem clip? Are there wave forms visible in the section without sound?
    Right click on the clip in the event broswer and choose Reveal in Finder; open the clip in Quick Time to confirm that there is sound throughout at that stage of your workflow.
    Russ

  • I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    at the end, you say "import preferences", which program are you describing?
    So im safer using footage that is remotely being pulled from iphoto...
    vs
    using footage that is imported into FCP from imovie?
    Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
    All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

  • How do use the hum remover in final cut pro 5? Help

    How do use the hum remover in final cut pro 5? Help!!

    Simply drop the effect onto the appropriate audio track. Set the frequency for the hum frequency (50Hz or 60Hz depending on your power supply). Include whichever harmonics you think might be present eg. 100, 150, 200Hz.
    Note that I have generally had more success by using Soundtrack Pro's noise removal tool.
    Trevor

  • How do I continue editing a project from the trial version of final cut pro to the paid version

    I have been working on a project on the trial version of final cut pro x.  I  bought the full version even though my trial wasn't up yet.  When I opened the paid version my projects from the trial are not in there.  I also closed the trial and opening the paid version and my projects were still not there.  How do I get my projects to show in the paid version?

         I have a 'similar' problem, but your advice above does not work (or does not seem to work).  My Trail version of Final Cut Pro 10.1.1 expired before I completed my first/only movie project. 
         I purchased FCP yesterday.  Now I want to "import" the video files and the movie project (not sure if that's the correct terminology - I am still a newbie) into FCP 10.1.1 -  Please advise?

  • How do i reverse the stereo pan in Final Cut Pro X

    how do i reverse the stereo pan in Final Cut Pro X

    For anyone that wants to know: Final Cut Pro X: Configure audio channels

  • Does CC 2014 eliminate the need to have Final Cut Pro and/or Compressor installed to access Apple ProRes 422?

    Hello:
    Just today, I was working on a Mac system that does not have any of the applications that I would have expected to need to have installed in order to do more than just decompress movie files compressed with Apple ProRes 422.
    I was expecting to have to install Final Cut Studio 3, Final Cut Pro X, Compressor 4, and/or QuickTime 7 with the QuickTime Pro key; however, none of those applications are installed and I am able to create custom QuickTime Apple Pro Res422 Sequences in Premiere Pro as well as export using Apple ProRes 422.  After Effects and Adobe Media Encoder also show all the Apple ProRes variations.
    Does CC 2014 eliminate the need to have Final Cut Pro and/or Compressor installed to access Apple ProRes 422?  Is it something happening on the OS or QuickTime level that would affect CC or CS6 in the same way?
    I've done a web search, but haven't really come up with anything other than older articles about needing to have FCP installed (and I typically work on systems with Final Cut Studio 3 installed as well as CS6, CC, or CC 2014).  If more detailed information is available, it would be great to be able to read up on it.
    The system is a 21.5-inch iMac running Mac OS X 10.8.5, QuickTime Player 10.2, and Adobe Premiere Pro CC 2014 (8.0.0 - I know an update is available for PrPro, but it's not my system to make that change).
    Thanks in advance,
    Warren Heaton

    Hi Emil:
    I use ProRes all the time as well, but I have Final Cut Studio on my workstations.
    I had not come across MindPower009's YouTube video.  That explains how ProRes could be showing up without FCP or Compressor.
    So, the answer to my question would be, "No, CC 2014 does not eliminate the need to have Final Cut Pro and/or Compressor installed to access Apple ProRes 422; however, if you are willing to be in violation Apple's terms of use, you can install the ProRes codecs anyway."
    Even though MindPower009's YouTube video comments claim "FREE and LEGAL", it's clear from both the Apple download page and the ProRes codecs installer that Apple expects you to own at least one of their applications.
    Thanks again for the link!
    -Warren

  • What are the steps for buying Final Cut Pro X and downloading a full version.i have a license certificate,but i cant be able to license the trial version

    How do i download a full version of Final Cut Pro.I have the license agreement with the serial numbers.but now i am unable to license the trial.What needs to be done here.I was sent the license agreement by our Head Office

    Do you refer to Final Cut Pro as part of The Final Cut Studio bundle?
    Or FCP X?
    The former has serial numbers, the later is a direct purchase from the Apple App Store and no serial number is required.
    Al

  • Final Cut Pro X after installing Mountain Lion I have lost some of the "additional content" which was available by clicking on "Download Additional Content" in the roll down from "Final cut Pro". Now this feature takes you to store update?

    Final Cut Pro X after installing Mountain Lion I have lost some of the "additional content" which was available by clicking on "Download Additional Content" in the roll down from "Final cut Pro". Now this feature takes you to Apple store update? which produces nothing! How can I download these free sound and music files, what has happened? Please help as there is nothing on the apple site to cover this??

    Final Cut Pro X after installing Mountain Lion I have lost some of the "additional content" which was available by clicking on "Download Additional Content" in the roll down from "Final cut Pro". Now this feature takes you to Apple store update? which produces nothing! How can I download these free sound and music files, what has happened? Please help as there is nothing on the apple site to cover this??

  • Can I import projects from the full version of Final Cut Pro X from when I was using the trial version?

    So I recently purchased the full edition of Final Cut Pro X, and was wondering why one of the projects I was working on at the time it expired imported back into FCP without asking me, but the other did not.  I really need to use this file, but it is in the format of .fcpproject, so I really don't understand why I am not able to use it.  It sometimes says when I try to open it that the version of that project was made in an updated version of FCP, or something to that affect, so it cannot be used.  I have no idea why it says this, because as far as I know that is un-true.  Any ideas?
    Edit:  I also don't want to delete the trial yet, a little apprehensive, like maybe I need it.  But I might if it comes to that.  I suppose the time did run out so it is practically worth nothing...

    You do not open fcpproject files. You don't double click or anything else. The files have to be in the correct folder structure in the Final Cut Projects folder and the application opens them automatically. Can you post screen shots of the Final Cut Projects folder and its location.

  • Is the Motion feature In Final Cut Pro 7.0.3 the same as Motion 5 or do I need to upgrade - confused?

    Is the Motion feature In Final Cut Pro 7.0.3 the same as Motion 5 or do I need to upgrade - confused?

    It's in the top level of the Applications folder

  • What are the system requirements for Final Cut Pro 7?

    I can't find the system requirements for Final Cut Pro 7, I can find the system requirements for X, but like I said not 7.
    I need to know the system requirements for Final Cut Pro 7, so I can buy the correct Macbook.
    Is there anyway I can find out the system requirements.

    Thanks
    I'm somewhat inept about things like this, so I just want to make sure once more: This is in regards to Final Cut Pro 7?

  • What is the oldest version of Final Cut Pro HD that supports...?

    What is the oldest version of Final Cut Pro HD that supports clips from Panasonic P2 Cameras?

    You must have 5.0.4 or later.
    Nothing earlier will work:
    http://library.creativecow.net/articles/rossshane/p2workflow/video-tutorial.php

  • HT203477 Why does my computer quit unexpectedly when I click on "Show the Project Library" in Final Cut Pro X ?

    Hello,
    When I click on "Show the Project Library" on Final Cut Pro X program, my computer unexpectedly quits.
    I just purchased an iMac 27in screen, (16G Ram) and all the features suggested by the Apple representative to run Final Cut Pro X.
    The program was working well for about a week. Afterward, I downloaded all my iMovie projects. I'm wondering if that has created this problem.
    Any suggestions as to what the solution might be?    Thanks.
    Jack

    Over the year I've used FCPX, it' s gone through "spells" where specific actions would crash it - much as you describe. Trashing preferences has nearly always fixed things. Several times, when it did not, I reinstalled the app.
    However, I've never imported an  iMovie project so I can't give any first hand advice. It will be interesting to see whether FCPX opens if it doesn't see those projects. (per Tom Wolsky's advice.)
    Russ

Maybe you are looking for

  • Problem with .sitx files (Safari but not Firefox???)

    Hi All, I have a website online (with help from iWeb and BBEdit) but am having a problem I cant figure out (this IS my first website!) I am hoping that someone much more knowledgeable than me can help me with it. I basically have a download section.

  • To startup my macbook pro, it doesn't accept my password

    please help,,, i cannot startup my mac,,, it does not accept my password and when i was able to reset the password of  my apple ID, it always ask login keychain password on which i do not know which keychain

  • Lost 5-volt signal from pin 49 on PC-LPM-16

    CUTTING TO THE CHASE Can you tell me how to check if I accidentally drew more then 1A from pin 49 and if the fuse is now open and, if so, how to replace it? THE BACKGROUND Was learning how to use this device to read analog voltages. Using Visual Basi

  • How to install ERP ECC6.0 on two cluster systems on HPUX

    Hi, i need to install ecc6.0 in production server on two cluster servers ( central instance in one server and database instance in one server both are cluster system). OS-HPUX DB-Oracle. Can you please give the solution. or plz send the document if y

  • Margins cause a slight ripple in the background

    I'm using a 15px margin the top of my header to account for people using browser toolbars and give it a little "breathing room". I noticed that the margin itself causes a slight ripple or "duplication effect" on the background. Is this normal? Grante