How do I change the start date for the week from Monday to Sunday on my iPhone 5?
How do I change the start date for the week on iCal from Monday to Sunday on my iPhone5?
Yes. On my new iPhone 5 the iCal week begins on a Monday not a Sunday and does not give me the option to edit in settings on the phone
Similar Messages
-
Position 1000001 not available for the start date of the infotype record
Dear Experts/Gurus,
I am getting the following error message "Position 1000001 not available for the start date of the infotype record" while trying to upload employees HR Master data in PA40.
I know the reason why because the position is created on 01.05.2009 & employee DOJ is 01.02.2006 both are mismatch & the position date has to be changed earlier date than DOJ but i don't know how to do.
Please let me know how to sort out this issue asap.
Rgds,
VikrantDear Friend,
Use PP02, select the position no, select infotype 1000 (Object), select planning status & validity(date) and then use the copy function to change the start date.
Regards,
Aks -
How do I set default start date for email flags
In IOS 4 and 5 every time i put a flag on an email it used "today's date" as the default date for the flag when the flag synched with Outlook. Under IOS6, my email flags show up in Outlook with "no date". Is this an IOS 6 change or did I somehow change the default to "no date" by mistake on my iphone. This is importatnt becasue Outlook allows you to arrange you inbox by Flag Start Date. When you arrange it this way, all the flagged emails move to the top by date. You can then remove all the non-flagged emails as a group.
Yes. On my new iPhone 5 the iCal week begins on a Monday not a Sunday and does not give me the option to edit in settings on the phone
-
Is it poosible to control the start date for an assort idoc on the erp sise
is it poosible to control the start date for an assortment list idoc on the erp sise
Hi rodeofive,
As per my understanding, the issue is a performance issue. And it is caused by there are thousands of values in the drop-down list of parameters in the report.
To work around this issue, I suggest you should make some changes in the report. For example, we can add additional two parameters with multiple keywords ahead, one for the dropdown contains 95k options, another for dropdown contains 24k options. Then all
of available values which are begin with the keywords will display in the parameter list. In this scenario, we can create cascading parameters. One is a keyword parameter, and the other parameter is the drop-down list that based on the keyword to display the
available values.
For more details about the method, please refer to the following FAQ:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/8de6c783-9cb4-4b95-9be8-b59bc0049866/forum-faqhow-do-i-add-a-search-feature-in-the-parameter-with-long-drop-down-list?forum=sqlreportingservices#8de6c783-9cb4-4b95-9be8-b59bc0049866
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
How do I change my security passcode for the AppStore
How do i change my security passcode for the App Store
Alternatives for Help Resetting Security Questions and Rescue Mail
1. Apple ID- All about Apple ID security questions.
2. Rescue email address and how to reset Apple ID security questions
3. Apple ID- Contacting Apple for help with Apple ID account security.
4. Fill out and submit this form. Select the topic, Account Security.
5. Call Apple Customer Service: Contacting Apple for support in your
country and ask to speak to Account Security.
Note: If you have already forgotten your security questions, then you cannot
set up a rescue email address in order to reset them. You must set up
the rescue email address beforehand.
How to Manage your Apple ID: Manage My Apple ID -
The meta data for the IDoc type "LOIPRO01" is unavailable
Hello,
i'm trying to send idocs via rfc from SAP ERP ECC 6.0 to SAP MII 12.06, but we always get errors like:
The meta data for the IDOC type LOIPRO01 is unavailable
I've checked the parameters on MII side of the IDOC Listener:
Servername MII_JCI33
server Properties
gwhost H33-I0.rz.k-plus-s.net
gwserv sapgw02
progid MII_JCI33
trace 1
params
snc_myname
snc_qop
snc_lib
unicode 1
max_startup_delay
Client Properties
client 303
user RFC-I33
alias_user
passwd
lang en
sysnr 02
ashost h33-i0.rz.k-plus-s.net
mshost H33-I0.rz.k-plus-s.net
gwhost H33-I0.rz.k-plus-s.net
gwserv sapgw02
r3name H33
group
tpname MII_JCI33
tphost H33-I0.rz.k-plus-s.net
type 3
trace 1
codepage 1
There is no saprouter between ERP and MII as in the thread from Christoph Mertins in November 2008. The user rfc-i33 on the ERP has SAP_ALL permissions.
Has anyone an idea ?
Kind Regards,
Thomas StreckerThomas,
There is a link for a basic IDoc installation that may help.
[IDocListener|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/manufacturing/how%20to%20send%20an%20idoc%20from%20sap%20ecc%20to%20the%20sap%20mii%20idoc%20listener.pdf]
One other issue that has occurred to cause problems is registering the program in Visual Administrator. If you registered the ProgID in Visual Administrator, there will now be two ProgIDs registered (MII does self registration with the RFC Destination upon starting the server). Delete the registration in VA, if you did it.
If there are other error messages available, please post them.
Good luck,
Mike
I also just remembered, if you have two ProgIDs that are the same, running on two separate MII instances, you may run into a problem. Not sure it will have the same symptoms or error messages, but something else to check with (especially when migrating from dev to prod).
Edited by: Michael Appleby on Feb 10, 2009 5:02 PM -
The meta data for the IDoc type "MATMAS05" is unavailable
Dear Gurus:
I need help in completing small test that I am doing to send MATMAS IDOC to xMII.
I have done:
1. RFC connection SM69 and tested ok
2. xMII IDOC Listner config with my SAP client
3. Connection appears in smgw ok (in logon client screen)
4. Completed Distribution channel and we20,we21
All above looks in place when I send one IDOC (BD10) it remains in 03 even after I run RBDMOIND. Besides IDOC is not appearing in C:\Lighthammer\JCO\Output.
On tRFC I see error The meta data for the IDoc type "MATMAS05" is unavailable.
Note that
a) I am NOT using transaction on routing tab
b) xMII version 11.5
c) I used "How to send IDOC ...." Version 2 PDF that is available on web (thanks to Bimal)
d) I looked at other two posts which has to do with LOIPRO message type and with JCO issue
Please help.
Thanks
JayJay,
What version of ERP are you using, perhaps this note will help: 770239
Also the SAP Help has some suggestions as well...<a href="http://help.sap.com/saphelp_nw04/helpdata/en/8a/b8b13bb3ace769e10000000a11402f/content.htm">Click Here</a>
-Sam
null -
Can we use the AdventureWorks2008R2 data for the real time project.
Hi,
In our project we are trying to do the data scrambling on First name, last name and middle name...
In the regular practice we use to update the names as
First Name = FN+<PERSON_SNO>
Last Name = LN+<PERSON_SNO>
Middle Name = MN+<PERSON_SNO>
The Problem is the names are not looking realistic, so I thought of applying some logic and updating our PERSON table names based on Person.Person table in adventure works.
My question is can we use the AdventureWorks2008R2 data for the real time project. Is there any cop right issue.
Someone please help me solve this issue.
Thanks
Karthikeyan Jothi.Please read this link content:
Adventure Works Sample Site
sqldevelop.wordpress.com -
ALE/IDOC:The group data for the material CS94163AOOO is locked by ECPUSER
Dear All,
I have extended the idoc for MATMAS and getting -The group data for the material CS94163AOOO is locked by ECPUSER
error on receving ( production ) server.I have written BDC in Z-function module to upload the data for extended segments after calling IDOC_INPUT_MATMAS01 function module.
When the same scenario executed in development server the material is not getting locked and idoc is posted successfully.
Please guide to resolve the error.
Thanks,
Sanjay Deshpande.
Edited by: sanjay_123 on Nov 1, 2009 4:41 PMHello,
Can you pls try to use ENQUEUE_E_TABLE or FM specific to lock/unlock MARA table during Idoc creation.
and put some WAIT statement before creation.
CALL FUNCTION 'ENQUEUE_EMMARAS'
EXPORTING
MODE_MARA = 'S'
MANDT = SY-MANDT
MATNR = 'CS94163AOOO'
X_MATNR = ' '
_SCOPE = '2'
*_WAIT = ' '
_COLLECT = ' '
EXCEPTIONS
FOREIGN_LOCK = 1
SYSTEM_FAILURE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Then write code for creation of MARA
Unlcok now like this
CALL FUNCTION 'DEQUEUE_EMMARAS'
EXPORTING
MODE_MARA = 'S'
MANDT = SY-MANDT
MATNR = 'CS94163AOOO'
X_MATNR = ' '
_SCOPE = '3'
_SYNCHRON = ' '
_COLLECT = ' '
~Pramod
Edited by: PKUPADHYAY on Nov 1, 2009 5:40 PM -
When is the release date for the 5th generation iPod touch
When is the release date for the 5th generation iPod touch?
Nobody knows (except for apple of course). All it says on the ipod touch page that it ships in October so it could be any date. I predict that it is in the first two weeks of October but when it says buy it now instead of pre-order you know its about to come out.
-
LIS - To get the data for the missing data for the infostructure S906
Hi
We have performed an unicode conversion In our SAP ECC 6.0 system, after the conversion, the infostructure S906 (copy of S006) was not updated for the period 22nd June to 25th June 09.
Then we regenerated the infostructure S906 using the tcode MCS/ on 26th June and after which the update rules are working correctly in S906.
Now when we run the SOP report for this week, the data is missing for the period 22nd June to 25th June 09.
We have gone thru the note 64636 - to setup the infostructure from the begining, which needs more downtime.
Is there a possibility to get the missing data for the above period only, instead of setting up the infostructure from the beginning.
Thanks & Regards
SenthilYou did not tell us what kind of update are you using. Some transactions (e.g. OLI1) allow to run it by posting date; others (e.g. OLI9) for a range of the documents. You can find what document numbers were created in the period of question and then run it for them. Although I would recommend the full rebuild.
-
Change first day of the week from Monday to Sunday(0CALWEEK)
Hello!
We have a report that display the data at a calendar week level. The start of the week currently show as Monday( retreived from FM - WEEK_GET_FIRST_DAY).
Is there a global setting in source system to change the start day of the week from Monday to Sunday? I can always make this change in the transformation but would like to know if there is a global option to make this change so the rest of the reports display the same.
Thanks
SirishaYou can check this SAP Note 624627 - Sunday first day of the week also a working day (Collective)
Might be helpful.
Regards,
AL -
How to get correct opening blance data for the quarterly report in BOFC?
Hi all,
I have a problem with getting the opening balance for the quarterly report.
i would like to keep the beggining balance data for the end of previouse year. (eg: now is 2010, then keep the begginig balance at Dec.2009 for each quarterly reporrt through the year in 2009).
however, for example in the second quarter, if i choose the beggining balance of Dec.2009 in the Consolidation definition, there is a problem that consolidation FS does not include the manual journal entry that ive entered at the first quarter such as goodwill.
Do I need to make manual journal entry at all the quarterly reporting period if I want to set the beggining balance for the previouse year end?
Could somebody please tell me how to remediate to this issue?
Or how do you manage with the opening balance in BOFC?
Thanks & Regards,
HitomiHi Michael,
HRMS appliocation
database 10.2.0.4
windows XP
ebs 11.5.10.2
One of our user using disooverer 4i desktop and administration edition on old windows 2000 machine and connecting to schema.
We are decommision old windows 2000 machine.
I have installed disooverer 4i desktop and administration edition on new windows XP VM box and trying to connect to same schema which was used with old
desktop and asking me to create EUL. What is theat I should be doing to use new one same as old one?
Old box is still there.
Thanks. -
How i can change my face time for the green one??
how i can change my face time to the green one??
No way that I know of. It appears that Apple change the color with the last update. I tried resetting the iPod and it did not change to the old green.
-
I have real complex data (i,q data) for the ISAR imaging. I don't have any knowledge of Labview programming. I bought this signal processing toolset to use only stand-alone time-frequency analyzer.
In the LabVIEW functions palette on the block diagram, if you go to Numeric>>Complex you have to VI's that splits a complex number into rectangular or polar components. Click on the help file for those VI's to see the kind of datatypes you can wire to them.
Cyril Bouton
Active LabVIEW Developper
Maybe you are looking for
-
How to populate one dropdown on select of other dropdown in a table
Hi My requirement is that I want to populate one dropdown on selection of some value in other drop down.The two dropdown are present in two columns of a Table. Can any body help for the same. Regards Nitin
-
HT1414 iPad 2: Virus? Broken Screen? How do I fix this?
My iPad 2, whose 1 year warranty is expired, was working fine (great, actually) up until a week ago. Suddenly, upon turning it on it only showed/shows black, white, & gray stripes, smoothly flowing until halfway across the screen then replacing thems
-
F11(Query mode) and Execute Query in Oracle Forms
Hi Experts, I am working with EBS11.5.10.2 and database 9i. I am working on forms, i am new to forms. Could somebody help me how to achieve F11(query mode) functionality in APPS forms. Thanks in advance.
-
Dynamic Cascading Parameters - cannot select/enter parameter value
I am rather new working with Crystal Reports and am having problems with Dynamic Cascading Parameters. I am using CR 2008 SP2, Version 12.2.0.290. Data is from SQL server. I have a report to print labels for parts in an order. I want to be able to
-
Further restricting a Restricted KF in Cells
Hi All, I have got a requirement to display some plan data 'From Current Day TO End of the Week'. So, i have created a RKF and restricted using a Variable. RKF is in Rows and in Columns i have Structure based on Calday. i.e. 1st Day of Curr Week, +1,