How do I choose Air 3.0 as my player?

Hey guys. I've downloaded the latest version of Air (3.1 now), but I can't choose it as my player in CS5.5.
Is there something specific I'm supposed to do so I can access it? I assume I can also import the Air 3 libraries into flash builder as well, right?

Once you have installed the update into the flash source folder you can then open flash, create new project, open properties panel and then choose your 'Player' version that should be displayed in the dropdown menu like displayed below...
Goodluck

Similar Messages

  • How to restore mac air late 2010 to its factory settings?

    How to restore mac air late 2010 to its factory settings?

    To restore the Late 2010 MacBook Air to factory settings:
    1. Insert the OS X thumb drive that came with your computer, hold the Option (Alt) key while your computer is starting and choose your USB drive.
    2. Choose your language, and go to Utilities menu > Disk Utility.
    3. Select "Macintosh HD" on the sidebar, go to Erase tab and erase the disk. This will delete everything that it's in the hard drive.
    4. Close Disk Utility and reinstall Mac OS X. Remember to install the iLife applications from the thumb drive after installing OS X

  • HOW DO I UPGRADE AIR - LAP1131AG TO AN AUTONOMOUS

    Please, how do i upgrade air-lap 1131ag to an autonomous one that will not required buying controller again.

    -    Initially console in to the LAP and issue the ' debug lwap console
    cli' or "debug capwap console cli" from the AP# prompt . (This gives us capability to enter the config mode of AP and use it like Autonomous )
    -     Now assign an IP address to Fast Ethernet interface of the AP which can be reach from the LAPTOP/DESKTOP .  (Basically in the same range or able to ping and telnet)
    -    Download the IOS image: www.cisco.com downloads for 1131AP series.
    Cisco.com --- Click on the Support tab in top--- Then click  Download software------ Choose Wireless --- Then select AP from product list-Then choose the AP model - choose IOS image
    -    Open the TFTP server (We used TFTP D32 ) (make sure that the TAR file's name is shown as in the web site, because sometimes it gets renamed to "Download .tar" and if that happens you need torename).  Browse the TAR file and select it and click ok.
    -     Go to enable mode of AP and enter the command:
    -    archive download-sw /overwrite /force-reload tftp://ip address of TFTP/image for download
    Regards
    Surendra

  • How do i use air sync to sync with my iTunes on my computer

    How do i use air sync to sync with my iTunes on my computer

    You cannot use ActiveSync for that, but there are SharePoint clients for the iPhone. Windows Mobile 7 natively supports SharePoint with SharePoint Workspace Mobile, part of Microsoft Office Mobile. Android and BlackBerry might also have some apps.
    Use Microsoft SharePoint Workspace Mobile
    http://www.microsoft.com/windowsphone/en-us/howto/wp7/office/use-office-sharepoint-workspace-mobile.aspx
    iPhone SharePoint Apps Shootout
    http://www.codeproject.com/KB/iPhone/iPhoneSharePointApps.aspx 
    Comparing SharePoint iPhone Apps
    http://blog.praecipio.com/2010/11/02/comparing-sharepoint-iphone-apps/
    MCTS: Messaging | MCSE: S+M

  • How can we choose to have different apps, different playlists, different contacts, etc., on each device., while using one itunes to sync more than 1 iphone

    How can we choose to have different apps, different playlists, different contacts, etc., on each device., while using one itunes to sync more than 1 iphone

    Use Multiple Devices with One Computer
    How to use multiple iPods, iPads, or iPhones with one computer

  • How do i get air play to work from my macbook to apple tv

    How do i get air play to work from my macbook to apple tv? It does work with some programs like itunes but I can't get it to work with safari.

    apple tv does not work in safari. there is no web browsing capabilities on the apple tv..
    however what you are probably referring to is mirroring? iPad 2 and iPhone 4s have mirroring capabilities, so what you have on the screen is exactly what would appear in the apple tv..
    on ipad for example...ignore the settings page. Instead, go to the iPod controls. Double-press your home button to see the multitasking bar, showing all your recent apps. Swipe your finger from right to left for the mirroring icon; you'll see the AirPlay icon. Tap on that, select your Apple TV and toggle the mirror button to 'on'.

  • HT5527 How do I choose the $40.00 Icloud plan? When I attemp this, it doesn't allow me to click "next."

    How do I choose the $40.00 Icloud plan? When I attemp this, it doesn't allow me to click "next."
    The only way it allows me to click "next" is if I choose the $100.00 plan. The email that was sent to me says that I should upgrade or reduce storage because my plan will be reduce to 5GB as of September 30, 2013. Please advise.

    Try Settings>iCloud>Storage & Backup>Change Storag Plan.  If you are a former MobileMe user you should see Purchase Current Plan listed between the 20GB and 50GB options.

  • While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

    While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

     Thanks for answering. The version is XI.0.10. I just did the update yesterday hoping that I could now properly edit a scanned pdf document. Yes, it's happening on most all scanned documents. I followed your steps & found the list of fonts used in the document & then attempted to edit. The same occurs. When I type in a correction, I get an error alert... "the original font (in this case Fd 5805) is not available or can't be used in editing. Acrobat is using the font Minion Pro in its place." 
    When I select the text & right click as you suggested, my only choices are cut, copy, delete or select all, no "edit text".
    I have no other options to choose another font. Thanks for any help you can direct my way. 
    Debbie
          From: sukritd15 <[email protected]>
    To: Deborah Karr <[email protected]>
    Sent: Friday, February 13, 2015 5:35 AM
    Subject:  While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
    While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
    created by sukritd15 in Creating, Editing & Exporting PDFs - View the full discussionHi Deborah , I would like to know couple of things before I assist you further.1.Which version of Acrobat are you using ?2.Is it happening for all the scanned PDF' or any particular PDF? You can try these steps,Launch the scanned PDF >right click >Document Properties(from the drop down list) >Fonts(on the dialog box)>From here you will get the fonts used in that PDF . While editing the PDF ,select the text that are editing or typing in with the help of selection tool .After you select the text ,right click on the text and choose "edit text" from the drop down list .From there you will be able to choose the desired font . RegardsSukrit Dhingra If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7190881#7190881 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7190881#7190881 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • How to connect MacBook Air OS 10.8.2 to wireless HP Officejet all in one 4630 e printer

    How to connect MacBook Air OS 10.8.2 to wireless HP Officejet all in one 4630 e printer

    Greetings loschach,
    Welcome to the Apple Support Communities!
    I understand that you would like to set up wireless printing with your Mac running Mountain Lion. To complete this task, please read over and work through the instructions located in the attached article. 
    OS X Mountain Lion: Set up a printer to print wirelessly
    Cheers,
    Joe

  • How do I choose a list of users that are allowed to view my galleries?

    I created several names and passwords of people whom I want to allow to view my albums, but before publishing it, I can only choose 1 person at a time. How could I choose ALL the people in my list? Thanks, Rachel

    I guess it's how you understand the password settings - I use mine as "Group name" and "Password", so I have "Family", "Friends", "School" etc, each with passwords.
    So instead of giving two of your friends a name/password each, you can create access for both of them under one "group" name and a common password.
    The protecting mechanism is very simple, it doesn't seem to allow different people with different passwords to access the same albums.

  • A phantom folder with the name of a folder that held photos has appeared in my finders places list.  I can't choose it to delete it.  it won't move.  It can't be found in a search.  How can I choose it and delete it?

    a phantom folder with the name of a folder that held photos has appeared in my finders>places list.  I can't choose it to delete it.  it won't move.  It can't be found in a search.  How can I choose it and delete it?

    Can you drag it off holding down the CMD key?
    Do a search for it with EasyFind  (try different settings in "Operator")
    http://www.devontechnologies.com/products/freeware/

  • How do you choose the scratch disk in lightroom 5.5

    how do you choose the scratch disk in lightroom 5.5

    You don't. There is no "scratch disc" in Lightroom. Please rephrase your question.

  • How do you choose songs from your ipod instead of from the car dashboard while your ipod is plugged into your car?

    How do you choose songs from your ipod instead of from the car dashboard while your ipod is plugged into your car?

    It depends on your car stereo. On the JVC we have you can select either "Head Mode" or "iPod Mode" when you're plugged into the USB port. Ipod Mode lets you select the songs from the iPod although the radio still controls the volume. I believe the Alpine I have does the same thing.

  • How do you choose bands when using the Dual n band routers?

    It say to use the 2.4 for surfing and the 5 for streaming video.how do you choose?

    DrGee wrote:
    It say to use the 2.4 for surfing and the 5 for streaming video.how do you choose?
    For your PC's that will be connecting for surfing only designate the 2.4GHZ band as the default connection on that PC. For devices, like a DirecTV HD-DVR, use a WGA600N and connect it via the 5GHZ band. As long as you have unique SSID's for each band it is simple.

  • How do I choose Preview as default over Adobe Reader?

    Once you update one thing . . . can of worms.  How do I choose preview as default over Adobe Reader?
    Here's why I want to change the default viewer, in case anyone has ideas: When I updated to Reader X (as required by some of our industry-specific programs) my Quickbooks Online financial program no longer prints in either Safari or Firefox.
    I called QB and they said they only support Reader 9.3. Uninstalled Reader X, tried install 9.3. No go--isn't compatible with Mac OS 10.6.7. Gave QB my "thoughts" on their not being up to speed with Reader updates . . .
    So, maybe changing to Preview as the default reader will work. Adobe 10 has overruled Preview.
    How do I set the preference to go back to Preview?
    Any help appreciated, thanks.

    Csound1 wrote:
    texricardo wrote:
    Worked a treat - thanks for your good, accurate advice!
    Thanks, maybe a 'correct answer appellation applies?
    Yes, indeed.

Maybe you are looking for