How do I configure my Airport Extreme to see the printer I have plugged into the USB port?

How do I configure my Airport Extreme to see the printer I have plugged into the USB port?

OK. The 6.0 version no longer has a printer configuration that I could find. You might try Printer Sharing in the Sharing preferences.
I would also check the printer's user manual for help with the setup, and that failing check the manufacturer's website and/or tech support.

Similar Messages

  • I have a pc running windows 7.  I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport.  The wireless router works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

    I have a pc running windows 7.  I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport.  The Airport works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

    +For now I have it set to Share Public IP address - Is this correct for my Network Setup with The Airport Extreme being the only router being used ?+
    This would be the correct setting if the AirPort Extreme is connected to a simple modem (one ethernet port).
    *Settings I have Enabled*
    5 GHz name indicates that you have elected to use the option to assign a separate name to the 5 GHz network. This will allow you to "tell" compatible computers to connect to that network, rather than the slower 2.4 GHz network
    Use Wide Channels is recommended for 5 GHz operation.
    Interference Robustness often does more harm than good and should not be used unless you know you are in a area with a lot of wireless networks and you feel that your network is experiencing interference issues from a nearby network.

  • How do I configure my AirPort Extreme as a wireless access point?  My cable modem goes to a router, and one of those ports goes to my AirPortExtreme.

    I am about to hook up my airport extreme.  My cable modem goes into a router, and one of those ports will supply my airport extreme.  I was told by the Apple Store that I would need to configure my airport extreme as a wirreless access point.  How do I do this?

    With sbcgobal I got a Gateway 2wire modem. What I would like to know is how do I set up my APE as remote?
    Unfortunately, you won't be able to do this as few non-AirPort routers will work with AirPorts in a Wireless Distribution System (WDS).

  • How do I configure my Airport Extreme in Lion?

    I could configure my Airport Extreme using the disk provided when running Snow Leopard. The upgrade to Lion appears to have 'uninstalled' the utility. Now when I try to reinstall it it tells me that it can't install it on the hdd because
    "The version of Mac OS X on this volume is not supported"
    What do I do now?
    Thanks
    Andy

    You should not still be using that disk.  There should be an up-to-date version of the AirPort Utility in the Utilities folder in your Applications folder.  Use that.  If it's not there, there's something wrong.  If it's missing, in Snow Leopard I would have said to use Pacifist to extract that from the installer, but I don't know if that works with Lion's installer or not.

  • I forgot my password and deleted my email account.  How do I regain it so I can see what purchases I have made in the past?

    I forgot my old password under a deleted email address.  Is there a way to get access to that account so that I can see what purchases I have made in the past?  This was at least 5 years ago that I did this?  Thank you.
    Brian C.

    that didnt help because when i plug in my iphone to the computer it doesnt show my iphone in itunes all it does it pop up saying if i would like to download and update my ios software to ios 7.1.1 . when i put it in to DFU mode it didn't do anything and thre computer did not recognise it and neither did itunes. so i dont quite understand how to do this ill keep on trying and see if im in luck.

  • How do I configure my Airport Extreme firewall?

    I seem to remeber configuring a firewall on my Airpot Extreme/Time Capsule when I first set it up.  How do I get into it again to check the configuration settings - The Airport Utility does seem to provide a way in.

    There is no "firewall configuration" on the AirPort Extreme. It provides a NAT firewall but this automatically closes all ports apart from the ones you choose to open.

  • How do I configure my Airport Extreme to work in Bridge Mode and provide specific IP addresses to clients

    My Airport Extreme is working with an Airport Express to wirelessly extend my wireless network.  Both Airports are configured in Bridge Mode per the instructions I found on Apple's support site.  I want to assign a specific DHCP address to a wireless camera that is in range of the Extreme, but I understand that the Extreme needs to be in DHCP Only mode to do this.  But if I change the mode to DHCP Only, the Extreme will lose contact with the Express.  How can I get both functions to work - wireless network extension and specific DHCP addresses?

    Then what device is providing DHCP? Only once device per subnet should be the DHCP server. One should be DHCP and NAT and the other in Bridge mode for most home setups. The unit with DHCP and NAT should be the one connected to your cable or DSL and the other set in Bridge mode only extends your network.
    On the wireless config page set whichever you're using to extend your network to "Extend a wireless network" and give it the details of the network to which you're attaching it.

  • How do I configure an Airport Extreme base station to receive and distribute a wi-fi network from a broadband wireless router?

    I have recenly upgraded my broadband service and now have a wireless router. My old network configuration was a router connected by ethernet cable to an Airport Extreme base station which then broadcast my wireless network (I also had an Airport Express base staion set up as a wi-fi booster elswhere in the house).
    I now have two networks (my original network and the new network from the wireless router) and wish to amalgamate these into one.
    Ideally I wish to use the Airport Extreme base station as the "remote" booster (I have purchased Powerline adapters for this purpose) but don't know how to configure the Airport Extreme base station in order to to this.
    Can you advise on the best set up for this please?
    My Mac is running OS X 10.8.2 and the Aiport untility is version 6.1.
    Thanks in anticipation.

    The AirPort Extreme should be configured to "create a wireless network" with the same WiFi network name, security type (usually WPA2 Personal) and password as your existing router. It should be configured as connection type Ethernet and be in bridge mode.

  • HELP! How do I configure an airport extreme card , so I can set up AEX base

    Hi
    I have had an iBook for a few years now with an Airport Extreme Card installed but not configured. Have just bought s/h Airport Extreme base station (cone shape) to go wireless, but am having MAJOR probs configuring the AEC to start with so I can set up the base station!
    It is asking me for a Client ID, to set Airport to DHCP?? this means nothing to me...
    How do I configure the card initially??
    Can anyone help, PLEEEASE??????

    purplemouse, Welcome to the discussion area!
    There is absolutely nothing you need to do to configure the AirPort Extreme card. After you install the card and boot the iBook, the OS recognizes the card.
    It is asking me for a Client ID...
    What is asking you for a client ID? This is not a normal prompt. What application are you running?

  • How do I configure my AirPort Extreme to allow printing from my Macbook to an HP PSC 1210?

    I currently have an AirPort Extreme [model A1354] connected by cable to an iMac [3.2 GHz i3 / 10.6.7]. I have an HP PSC 1210 series "All-in-one" printer attached to the USB port on the AirPort Extreme. Printing from the iMac works just fine.  However, I cannot print from my Macbook [ 2.4 GHz Intel Core Duo / 10.5.8]. While the printer shows up when I go to "Add a printer", I still cannot print to the printer.  When I hit print, the print window closes, but nothing prints.

    Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the  AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.  
    To see if your printer is compatible, take a look at this iFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try. 
    Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule 
    Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

  • How do you set up airport extreme with a windstream all in one modem with the wireless router built in

    I have a wireless network that I want to extend so there will be wifi coverage all over the whole house. I want to use the airport extreme to do so. so far all i can get to work is the airport making another network via a eithernet cable that is pluged into one of the ports on the windstream wireless router/moden (all in one you plug the phone line into this and it has the wireless built in) and the other end is in the WAN port of the airport. I guess the real question is do I need to change any settings on the windstream wireless router/modem to do so. Every time I select all the options to extend a network wirelessly I keep getting errors.

    The Airport Extreme can not wirelessly extend a 3rd party router, it can only extend another Apple router. If you can somehow keep the two connected via ethernet, you can setup a roaming network. A roaming network is essentially "extending" your network by using an ethernet cable to bridge the two routers.

  • Is there any way to print wirelessly using Airport Extreme with an older printer (HP Laserjet 2100 TN) - no USB connection.

    I have an older printer and currently use a Cisco wireless router with Network Magic software which allows me to leave my 30 pin printer connected to the desktop computer and share the printer with everything on the network. Does the Airport Extreme allow for this? I am just connecting one that I purchased but can only find documentation on connecting the printer via USB (which my old printer does not have). The printer is late 90's vintage, but its comercial grade and is still one of the best printers I have used so I want to keep it going for now.

    I don't really know much about anything BUT with that said, I have PCs, I have an old commerical work horse HP laser printer that works with the Airport Express as a print server through my wireless router.  But having problems with my wireless router, never my AE, now how to change from WEP to WPA etc.for a new wireless router.  Maybe I need to look into the Extreme.  Good luck 

  • Airport Extreme Base Station- wireless printer- wired computers able access the printer

    Airport with a wireless printer- will wired computers be able to access the printer?

    Yes.
    A printer on your network is accessible to any computer on the same network. Wired or wireless makes no difference.

  • Was told a USB device would create a PDF automatically from the data contained within when plugged into my USB port. Doesn't seem to work. How does this work and how can I fix the device I received?

    Acrobat is not on the USB device - only Adobe Reader needed on the PC. How does this work? How can I fix this device if at all?

    You need to ask the people who sold it to you. Doesn't sound like it has anything to do with Reader.
    However, you should be wary of devices that automatically try to open files when plugged in. They can also infect your computers with all kinds of viruses or malware.

  • How do I connect my airport extreme to windows 8.1

    how do I connect my airport extreme to windows 8.1

    Connect an Ethernet cable between the U-verse router's LAN port to the WAN (circle-of-dots) port on the AirPort Extreme Base Station (AEBS). Since you will have two routers in series, you will want to reconfigure the AEBS as a bridge. (ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection tab > Connection Sharing = Off (Bridge Mode))

Maybe you are looking for

  • How can i access the hard disk and know the no of partitions

    sir i want to access the hard disk and know how many parttions the hard disk have means c,d,e,f,g or may be c,d,e? also volum no or serial no. but i do not know how? plz help me and send me a code thanks in advance if this quesstion is not related to

  • My iphone wont show up in itunes

    iphone wont connect to itunes. windows computer new itunes update done

  • Wrong PDF page size in Excel

    When I use PDFMaker to "print" the print area of one particular spreadsheet, the Adobe PDF page size is 11.18 x 14.47 inches. When I use Adobe PDF printer, the Adope PDF page size is 8.5 x 11.0. Excel Page size = Letter (8.5 x 11.0) Excel Page orient

  • Message Mapping in PI 7.1

    HI I am working on a Proxy to SOAP Scenario,  On the Proxy side(sender)  Injured Body Part Code has been defined as 0 - 1 (Occurance) and It is mapped to BodyPartCd which is defined as 0 - Unbounded (Occurance) on the receiver side (SOAP Message)  Ho

  • Error Message on Redirect

    Hi all, I have configured an error page in web.xml when an error occurs - e.g. the file size limit exceeded. This is a plain html page as I have not found a way to use a jsp. Is it possible to give a detail error message? I want an error page similar