How do i configure REGISTRY for enterprise services

Hi,
Please let me know how to Configure Registry for enterprise services in  SAP Discover system V2.
Regards,
Naveen

I'm afraid it's a bit more complicated than adding a server into the list in Step 3 :)
When a DirectAccess client is connecting into a corporate network that is IPv4 (I assume yours is, most are), it can reach into your IPv4 servers because the DA server is doing NAT64/DNS64 translations, turning all of your DirectAccess IPv6 packets into
IPv4 packets before they head inside the network. But even though this happens in the background without you really knowing about it, the key thing there is that all DirectAccess traffic is IPv6. This means the clients can only be contacted via IPv6. If you
have IPv6 inside your network, then you can route outbound fairly easily to your DA client computers. If you are all IPv4 inside as most companies are, then you have to either roll IPv6 out inside your network, at least partially, or you have to utilize ISATAP
inside your network in order to create a sort of "virtual IPv6 cloud" that runs on top of your IPv4 internal network. This enables your internal management systems (like the BMC servers and helpdesk computers for RDP access outbound) to have a connection
into the IPv6 world, which then enables them some routing capability to get out to the IPv6-connected DA clients. In addition to this IPv6 or ISATAP setup, you also need to configure WFAS rules on the DA clients so that they will allow this traffic.
There is some info on setting up ISATAP here: http://blogs.technet.com/b/jasonjones/archive/2013/04/19/limiting-isatap-services-to-directaccess-manage-out-clients.aspx
Otherwise one of the chapters in this book is also dedicated to the setup of a selective ISATAP environment, to be used for the purposes of DirectAccess outward management: https://www.packtpub.com/virtualization-and-cloud/microsoft-directaccess-best-practices-and-troubleshooting

Similar Messages

  • Direct Access is working but how do I configure it for remote services, client management software, etc..

    Good morning/afternoon/evening TechNet,
    I've finally gotten a DA client connected to the corporate network utilizing an external network. I'm having a couple issues, one, not being able to ping the server from a computer that's on the same domain(I'm able to ping the DA client from the DA server).
    I'm not sure if there is a firewall setting that needs to be open on the client for incoming echo requests? Second, we use a client management system called BMC and I would like the direct access server to be able to utilize the BMC server so that I can manage
    the DA client whenever its on the network. I noticed on the DA server that "Step 3" offers an area where it allows you to add servers that will be used for direct access client management. Would I just need to populate the server in here and then
    open appropriate firewall rules so that the DA server has access to them? Lastly, Trying to "mstsc" into the DA client what would I need to open up on both sides so that I'm able to do this?
    Sorry about the horrible grammar but I've been up 24+ hours getting this awesome but pain in the butt Direct Access feature working.
    Thank you as always!
    -Liqsh0t

    I'm afraid it's a bit more complicated than adding a server into the list in Step 3 :)
    When a DirectAccess client is connecting into a corporate network that is IPv4 (I assume yours is, most are), it can reach into your IPv4 servers because the DA server is doing NAT64/DNS64 translations, turning all of your DirectAccess IPv6 packets into
    IPv4 packets before they head inside the network. But even though this happens in the background without you really knowing about it, the key thing there is that all DirectAccess traffic is IPv6. This means the clients can only be contacted via IPv6. If you
    have IPv6 inside your network, then you can route outbound fairly easily to your DA client computers. If you are all IPv4 inside as most companies are, then you have to either roll IPv6 out inside your network, at least partially, or you have to utilize ISATAP
    inside your network in order to create a sort of "virtual IPv6 cloud" that runs on top of your IPv4 internal network. This enables your internal management systems (like the BMC servers and helpdesk computers for RDP access outbound) to have a connection
    into the IPv6 world, which then enables them some routing capability to get out to the IPv6-connected DA clients. In addition to this IPv6 or ISATAP setup, you also need to configure WFAS rules on the DA clients so that they will allow this traffic.
    There is some info on setting up ISATAP here: http://blogs.technet.com/b/jasonjones/archive/2013/04/19/limiting-isatap-services-to-directaccess-manage-out-clients.aspx
    Otherwise one of the chapters in this book is also dedicated to the setup of a selective ISATAP environment, to be used for the purposes of DirectAccess outward management: https://www.packtpub.com/virtualization-and-cloud/microsoft-directaccess-best-practices-and-troubleshooting

  • How to map business process and enterprise service?

    Recently, I read some documents about ESA. I'm confusing about the relationship between business process and enterprise service. In other word, how to map the business process to enterprise service after the business process is analyzed? Is there any methodology/rule to define business process and wrap them into service in ESA?

    Hi Sherry,
    I like to add some of my thoughts about that discussion. From my point of view ESA is much more than just another BPM or Enterprise BPM. ESA is adresses six key areas and I think all of them are really needed:
    - <b>People Productivity</b> as the word itself describes...it's about portals and productivity.
    - <b>Embedded Analytics</b> has to integrate transactional and analytical content.
    - <b>Service Composition</b> is used for model-driven service composition and services orchestration.
    - <b>Service Enablement</b> is about a Enterprise Services Repository filled with business meaningful Enterprise Services and service patterns for enabled objects. Excactly this is where SAP has years of experiences.
    - <b>Business Process Platform</b> is about service enablement of all application platform objects and engines. This is the place where "BPM" for core business processes resits.
    - <b>Life-Cycle Management</b> has to cover the deployment, configuration, operation and change management for ESA based processes.
    Therefore the term "BPM" is located in serveral layers of an ESA approach. On the level of <u>Business Process Platform</u> BPM is providing the choreography for core business preocesses.
    At <u>Service Enablement</u> BPM needs to compose out of granular services (I would say "atomic" services)
    buiness meaningful services (here we have "molecular" services).
    The third level where BPM could be used is <u>Service Composition</u> because exactly this is the place
    where serveral Enterprise Services could be combined to a process representation.
    To come back to the discussion:
    1. The question should be how to indentify business meaningful services which could represent single process steps. ATP check, Credit card check, ... could be examples. In theory this service could be out-tasked, defined more flexible etc. This means that processes needs to be evaluated for Enterprise Service candidates. Afterwards you can check against SAP's Enterprise Services Repository for already existing Enterprise Services. The evalution for enterprise services candidates will be supported by the metodology mentioned by Kaj and David.
    2. I think domains in this context should be motivated by business and/or functional areas. Depending on the granularity. For example Order Fulfilment Services, Master Data Services, Search Services... These kind of serices can be combined again to services such as "Search of Master Data" (Search Service + Read Master Data Service) etc. or can be used to generate UI to be used in a ESA application.
    Your thoughts?
    Very best regards
    Wulff

  • Logical Destination/Service Group for Enterprise Services

    Hi,
    we have a Discovery System V3 and published the Services into the Services Registry of a seperate CE 7.1 installation. Now when I create a NetWeaver BPM process that calls an Enterprise Service from the discovery system I have to specify either a logical destination or a service group.
    I know that they are used to configure Web Services (authentication, etc.), but do I have to use them for Enterprise Services delivered by SAP? I thought they are ready-to-run???
    Thanks,
    Manfred

    Yes, we have to use either logical destination or service group. This complies with the new configuration approach of SAP ESOA which is described here: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40dabb46-dd66-2b10-1a9a-81aa620098b3.

  • PI 7.1 enterprise services: How to find & invoke SAP HCM enterprise Service

    Hi all,
    in PI 7.1, i read, there is support of enterprice services.
    is my current understandings right about PI 7.1 and enterprise services:
    1.the standard BAPIs, standard RFC that were provided in R/3 are replaced by standard enterprise services in SAP ECC.
    2.a nonSAP application can invoke an enterprise service in the same way as a nonSAP application used to call an RFC in the R/3.
    I want to view how an enterprise service of any SAP module can be called by a nonSAP applicaiton.
    are there any doc or blog which shows this.
    is possible with/wihout PI.
    We have follwoing things installed.
    1. PI 7.1 SP4.
    2. SAP ECC 6.0, i am dealing with SAP HCM module.
    are there any enterprise services of HCM available (e.g standard enterprise services given by SAP for HCM module).
    basically i want to test whether a nonSAP application like a java application, can it get some info using standard HCM enterprise services provided by SAP.
    I explored esWorkplace (http://www.sdn.sap.com/irj/sdn/esworkplace), but it does not display HCM related process components under the column "DISCOVER ENTERPRISE SERVICES".
    thanks,
    Madhu.

    Hi Madhu,
       YOu can check this page for simple sample applications for enterprise services consumption:
    http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DE0426DD9B0249F19515001A64D3F462&id=EBF08FD8067241F787448B3EB87DA04E
    Check this page for ERP-HCM
    http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DE0426DD9B0249F19515001A64D3F462&id=C6AE1E905D8E11DA36BB000F20DAC9EF
    and complete business map here:
    http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?id=13C98C60080711DA1503000BCDDC2565&fragID=&packageid=DE0426DD9B0249F19515001A64D3F462&iv=
    Regards,
    Ravi

  • Understand the technical base for Enterprise Services?

    Hi all,
    I am trying to understand what is the technical base for enterprise services and the restrictions when activating them. The best documents I have found are:
    Note 1566412 u2013 Enhancement package 6 for SAP ERP 6.0.
    Note 1359215 u2013 Technical prerequisites for using enterprise services
    sdn blog u201CDetermin the SOA readiness of your System with the ES Workplace (Part 1 and 2)
    EHP Master Guide - https://websmp107.sap-ag.de/~sapidb/011000358700001183052011E
    The documents are quite informative, however there are still questions. Maybe someone can shed some light of these:
    1.) Is my understanding correct that Enterprise services can have three different base u201Cmodulesu201D?:
    a. An EHP (with relation to a business function).
    b. The swc u201CESA ECC-SE 60xu201D (without relation to a business function). E.G. ES Bundle "Bank Communication Management".
    c. The SWC u201CSAP APPLu201D (without relation to a business function). E.G. u201CBusinessPartnerERPUpdateRequestConfirmation_Inu201D
    2.) Is it possible to activate enterprise services (bundles) that rely on business functions after a EHP installation or ONLY during the EHP installation?
    3.) Is it possible to activate enterprise services with base u201CESA ECC-SE 60xu201D after a EHP installation or ONLY during the EHP installation?
    4.) Is SWC u201CESA ECC-SE 60xu201D a u201Ctechnicalu201D business function, whose activation cannot be reverted either? If yes what effect has the activation von u201CESA ECC-SE 60xu201D on the current ERP customizing?
    5.) How do the Enterprise Services relate with Service Interface definitions from SAP Process Integration (XI Content)?
    Do I need the XI Content with the service interfaces in ES Repository (and SPROXY) only if the communication is B2B (with PI) or also if the communication is Point-2-Point (without PI)?
    Thanks for your feedback!
    Chris

    Hi Chris,
    I'll try and provide answers where I can...
    1.) Is my understanding correct that Enterprise services can have three different base u201Cmodulesu201D?:
    I personally don't agree with this understanding. Enterprise Services would always relate to some or other business function, unless we have a different understanding of what "Business Function" means . What changes is how the Enterprise Services (or versions of them) are delivered.
    SAP APPL for example would be relevant to most of the enterprise services shipped with a standard ECC EHP*. So it will relate to the business functionality for the applications that are shipped with an ECC installation.
    2.) Is it possible to activate enterprise services (bundles) that rely on business functions after a EHP installation or ONLY during the EHP installation?
    I don't understand this question but I'll try and offer a generic answer. You can activate/use Enterprise Services whenever you want to as long as they are already available in your current installation. If they are only available in an EHP that you don't have yet then you will need to upgrade (but I also seem to recall some workarounds - SAP notes - as an alternative to upgrading).
    3.) Is it possible to activate enterprise services with base u201CESA ECC-SE 60xu201D after a EHP installation or ONLY during the EHP installation?
    You decide when you would like to activate it, it's generally after. SAP will ship them anyway.
    4.) Is SWC u201CESA ECC-SE 60xu201D a u201Ctechnicalu201D business function, whose activation cannot be reverted either? If yes what effect has the activation von u201CESA ECC-SE 60xu201D on the current ERP customizing?
    There is a tool call Impact Analyzer, read up a little on it. It allows you to do an impact analysis before activating. It might also help posting a separate thread on of the ECC functional forums here on SCN for more impact analysis. I'm not sure if the activation can be reverted.
    5.) How do the Enterprise Services relate with Service Interface definitions from SAP Process Integration (XI Content)?
    The XI Content is the design equivalent of the Enterprise Services as you see them in SPROXY. It's only relevant in certain cases, examples:
    - If you want to enhance standard SAP Enterprise Services
    - If you want to do additional transformation/s & routing.
    If you are planning P2P type communication, then the XI content is not relevant. One thing to be aware of though is if you have your backend ECC system connected to your PI ESR, the view that you get in SPROXY will reflect the SWC view of the ESR. So you might want to download the XI Content & import it into your PI ESR anyway.
    Regards, Trevor

  • Developement XI-Content for Enterprise Services

    Hi,
    What is XI-Content? And what must be defined in XI-Content for Enterprise Service Enabling?
    We have defined some services as provider, these services are goint to be in XI-Content. But we are also requesting some infromation to business partner, these inforamtion could be services or messages in case our partner does not have services.
    So my feeling is: in XI-Content we need to define:
    Interfaces for the services which we provide;
    Interfaces which we as consumer request?
    Interfaces which from partner as provider?
    Interfaces for the messages which are sending from partner?
    Mapping between the service interfaces (provider <->consumer)
    Mapping between the messages and the services?
    I am sorry, but this is really confusing when we plan the development of XI-content.
    Could you give me a clear picture or guideline according to your experience?
    Thank you very much.
    Jing

    This XI content is nothing but most commonly used integration scenarios for address specific business process requirements for a particular landscape.For Ex:Interface for Creating PO ,Sales Order etc.
    I have read many articles which say that XI Integration Repository will be re-named as Enterprise Service Repository which will enable the customers to kick-start with Enterprise Services.SAP sets the ball rolling by providing 500 Enterprise Services.
    As far as I understand these services are nothing but commonly used re-usable integration scenarios which are powered by Webservices.Enterprise Service Granularity depends on how you define your "Service".
    You have an awesome article on ESA which explains in an excellent way.
    Search the sdn for Enterprise Service Design Guide which can be an answer all your questions.

  • How to set "Configuration Variant" for a sales order item using function

    Hello All,
    I use function module 'SD_SALES_DOCU_MAINTAIN'  to create Customer Indep. Requirements but how to set "Configuration Variant" for a sales order item.
    Is their any idea or sample code?

    Hi Zhijun zhang,
    <u>http://help.sap.com/saphelp_nw2004s/helpdata/en/c0/98038ce58611d194cc00a0c94260a5/content.htm</u>
    <u>http://help.sap.com/saphelp_nw04/helpdata/en/c0/980374e58611d194cc00a0c94260a5/content.htm</u>
    A variant is simply an SAP report where the parameters for running the report have been set by the user and then saved with unique name. This allows future retrieval and execution of the report faster without reentering the parameters. As a convention the variant name should start with with the digits 50 so searchs for LHU variants is easier and quicker.
    The first link will guide you by screen shot wise.
    Award points if it adds information.
    Thanks
    Mohan

  • Examples for Enterprise Service

    Hi All
    Anyone can you give some examples of Enterprise serivices.
    and
    Difference Between ES and Functional Module.
    Regards,
    Raj

    Hi,
    you can create "normal" web service out of function modules.
    Enterprise Services are first modelled in the ESR and then implemented in the NWDS or the ERP.
    You can browse for Enterprise Services.. https://www.sdn.sap.com/irj/sdn/explore-es
    SAP provides an environment where you can test the enterprise services...
    regards

  • DataObjects for Enterprise Service

    Hi Sdn Team,
    Please can anyone help me how can i create DO for Enterprsie Service fields
    How can i troubleshoot the process...?
    How BRM rules can be integrated into BPM?
    Thanks
    Ravi

    hi,
    you can compose a xsd file to generate DO.
    right click your activity, there is an option "Toggle Breakpoint", then you can start debug like other application.
    the issue is you can debug bpm process only if you have only one server node for server.
    for bpm and brm integration, you can go to this blog
    /people/jie.deng/blog/2008/12/12/building-a-composite-business-process-from-scratch-with-sap-netweaver-business-process-management
    Best regards,

  • How Do I Configure SSL for RAC Installation.

    Experts,
    Requesting your inputs on configuring SSL for my RAC environment.
    - Oracle DB version is 11.2.0.2
    - RAC is with two nodes.
    - Two nodes are : rac1.oracle.com and rac2.oracle.com
    - RAC setup has SCAN feature configured. SCAN FQDN : racscan.oracle.com
    - All clients talk to RAC DB using SCAN feature as shown below.
    client applications -> racscan.oracle.com ---> rac1.oracle.com
    ---> rac2.oracle.com
    - tnsnames.ora file on both RAC instances has hostname as "racscan.oracle.com" instead of their individual phyiscal host names.
    How do I configure SSL for RAC:
    1. Do I need to generate certificate request for individual hostnames or only for SCAN hostname ?.
    2. If I generate a certificate based on SCAN hostname, how does SSL work since SCAN hostname is not a phyiscal host name ?
    3. What is recommended strategy for configuring SSL for RAC environment ?
    Thanks

    The documentation on the creation of Oracle Wallets is not specific to RAC, and the RAC SCAN instructions for TCPS are very vague on the specific requirements for the certificates required in the wallets for proper operation. I too am struggling to get it to work. Does anyone have a more technical guide to the specific configuration of the certificates needed and what specific configuration file changes need to be made?
    Also, the self signed documentation is getting REALLY old. Oracle, please stop giving instructions that demonstrate irresponsibility and show the proper method of certificate requesting and importing to wallets.
    Edited by: user11338513 on Mar 21, 2012 2:23 PM

  • How to request acknowledgments for Enterprise services

    Hi Experts,
    We are using enterprise services for our outbound interfaces in retail system, how do we request acknowledgements for these messages, is there any setting we need to make???
    we are not using any custom proxy programs, these are SAP standard programs, if anyone done before please let me know

    Hi,
    At this moment I don't think you can do that. I think that the philosophy is that once the service call was succesfull you shoul safely assume it went ok. you could probably create a scenario that once the receiver system generates an ack it is routed back somehow.
    if you want it for an inbound interface (sending towards ecc) I think you need some custom code

  • How to activate Business Add-In (BAdI) for Enterprise Service

    Hi,
    I have connected enterprise service
    Find Production Order by Work Centre
    external/technical Name: ProductionOrderSimpleByWorkCentreQueryResponse_In
    Namespace: http://sap.com/xi/APPL/SE/Global
    SAP Software Component Version: ESA ECC-SE 605
    Internal Name: ECC_PRODUCTIONORDERSWQR
    SAP Library - Enterprise Services for SAP ERP
    http://es-workplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DE0426DD9B0249F19515001A64D3F462&id=…
    from our ECC system to our PI 7.1 and did first tests.
    I'm getting response to my requests from the ECC system.
    But in the response, there are only the production order IDs for the requested work centre.
    I suppose that the BAdI PORD_SE_PRODUCTIONORDERSWQR, mentioned in service description, has to be activated for the service in the ECC system, to get all the other optional production order elements, defined in the service response message type.
    Am I right?
    Which steps in the ECC backend are neccessary to activate a BAdI for an enterprise service?
    Regards
    Roland

    Salegram,
    BADi is not provide us functionality for data upload for Annual PF / Pension Report.
    BADi is using for some add in our business transaction.
    just explore tx se18 ans se19.
    Amit.

  • How to Publish a Webservice for a service definition in PI 7.1

    HI ALL
    I am trying to get the WSDL URL to provide to Enterprise portal.
    Can you please help me with steps on how this can be done using PI 7.1 Service registry.
    Currently I am assuming we can use the PI 7.1 Service registry to publish web Service.
    If my assumption is true, how do I get the WSDL URL from PI 7.1.So, that I can provide this WSDL URL to enterprise portal and using they can get to PI using this WSDL URL for specific service interface created on PI 7.1.
    Your help is greatly appreciated!!
    Thank you,
    Ritu

    Hello
    Please make sure in your PI Netweaver Administration Destination Template has [UDDI_DESTINATION and CLASSIFICATION_DESTINATION|http://help.sap.com/saphelp_nwce711/helpdata/en/eb/20b86b96b1494faec272c34f100635/content.htm] created and has configuration for [central service registry|http://help.sap.com/saphelp_nwce711/helpdata/en/47/d391d7b8fc3c83e10000000a42189c/content.htm] done.
    Also make sure in your service registry (http://<host>:<port>/sr) that these services do not exist before you try to publish it.
    HTH
    Jinal Shah

  • Abap Class for Enterprise Service

    Hi guys.
    I've published as webservice in SAP ECC as enterprise service get it in Enterprise Service Workplace.
    I have two questions:
    1- How can I know the abap class associated to this enterprise service.
    2- Could I extend the functionality of this enterprise service? For instance I'd like to response with one more field. Is that possible or I have to create a new one?
    Thaks a lot.
    Regards.
    Edited by: Christian  Abad Chico on Feb 20, 2012 4:03 PM

    Hi
    May be the below link helps you,
    [http://wiki.sdn.sap.com/wiki/display/EmTech/PublishWeberviceinABAP,ConsumeWebserviceinABAPandAdobeFlex.]
    Regards,
    Vijay V

Maybe you are looking for

  • XSLT - New Line/Carriage Return not displaying when deployed

    Hello everyone, I have an XSL Style Sheet that is supposed to transform an XML into plain text using Oracle SOA 11g BPEL transformation. The plain text transformation is working fine, but whenever I try to add a new line or carriage return, the text

  • I want to open my new Macmini to internet

    I need help to configurate my new mac mini. In fact I would like to be able to get to my mini mac at home from anywhere in the world with any other device. Can someone help me to set up this proprely with the right software I will need ?

  • Minimum Order qty in sales order

    I know that I can setup in the master data the min and max qty on Sales Org 1 view which then triggers a message if the qty is outside the band. This is then for all orders for that material, but I need it to restrict per customer (different min/max

  • Release status for planned order

    Hi All       I am running MRP weekly,system is generating the Planned order  once MRP is completed.Here my requirement is i want release status for planned order, at the same time once planned order is released i dont want user to change any data in

  • Problems accessing application when using SmartView

    Hi friends, Getting the below error while connecting to applications using smart view.Any suggestions could be of very helpful. Unable to access the application when using SmartView. The user has access to the application DB however: Either user does