How Do I Connect An Airport Extreme With Password to another Wireless Devic

We have a setup for two different wireless devices so that there are multiple locations that can get online, but the entire setup has no passwords assigned. We would like to assign passwords to both wireless devices so that only the appropriate people are getting online. How does one do this?
The first wireless device that connects directly to the modem from the phone company is a brand new Apple Airport Extreme. The computer that set up the device so that people can get a signal was from a PC that is directly connected to the Airport Extreme via an ethernet cable. Also connected to the Airport Extreme is an ethernet cable that goes (50-100ft) to another wireless device - by Netgear - which then sends out another signal to pick up wireless internet, which is the signal/network that I work from.
If we assign a password to the Airport Extreme, I'm guessing it will complete screw up the connection to the Netgear. How would that be dealt with? And, how could we then, if we wanted, set up a password for the Netgear as well. I've read some initial information on the user guide CD and online, but I don't know the terminology of whether these are networks or just wireless devices 'bridged' together, etc.
My biggest concern, is it works right now, but the owner of the devices wants to put passwords on it and I want to make sure we can keep it working even with passwords. Does anyone know how to easily set up passwords and can I do it from my computer even though they were initially set up by a PC? Or do I have to do it from the PC and if so, how, because I am completely a Mac person and am very unfamiliar with Windows. Thanks.

Question that I need to know now is how do we set up a password on the Apple Airport Extreme now, when it is already set up and working without one?
Open AirPort Utility.
Select your base station, and then choose Manual Setup from the Base Station menu. Enter the base station password if necessary.
Click AirPort in the toolbar, and then click Wireless.
Choose a password scheme from the Wireless Security pop-up menu.
Enter the password all users will need in order to join this wireless network.
AirPort Utility 5.1 Help: Password-protecting your wireless network
Also, are there different types of passwords and if so, what is the most reliable one so that we don't lose connections, time out or have any other quirks?
There are different types of wireless encryption. WPA2 and WPA are the most secure especially when used with a non-dictionary password. 128 bit WEP is passable in most situations but not very strong. 40/64 bit WEP is extremely weak.
There is really no general "reliability" issue with any of them. Some devices aren't compatible with some of them.
If when we assign a password to the Apple Airport Extreme and for some reason the Netgear stops working, how do we unassign/take away the password on the Airport to get it back to the current setup that we know does work?
Follow the procedure above but disable wireless encryption instead of enabling it.

Similar Messages

  • How do i connect my airport extreme with my airport express

    how do i link my Airport Express with my Airport Extreme?

    Hello Bob -
    I have an Apple Extreme (5th Gen) and I have tried to extend my network with an Apple Express Model No. A1264 with the ethernet connection.  It does not seem to work, and has crashed my network twice.  When I did get it to work, the wireless crawled.  When I took the AirPort Express off of the network the speed went back up.
    Can this be done to extend the network, as I have the Extreme in the basement where the cable comes into the house, and I have two other floors that need wireless access.  Any suggestions for this older model AirPort Express? 
    Thanks.

  • How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?

    How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?  I have an ISP provided wireless Router that has to remain as the base station.  I am able to join my 1/2TB Airport Extreme and Airport Express to the network, but I can't access/use Time Machine.

    One option would be to connect the Time Capsule (TC) to the ISP-provided wireless router by Ethernet. You can then configure the for a roaming network. Then, depending on what your goal is for the AirPort Express, you can either: 1) Add it to roaming network, 2) Configure the TC & the Express for an "extended" network, or 3) Configure the Express to "join" the roaming network for AirPlay.

  • How do I connect my airport extreme to windows 8.1

    how do I connect my airport extreme to windows 8.1

    Connect an Ethernet cable between the U-verse router's LAN port to the WAN (circle-of-dots) port on the AirPort Extreme Base Station (AEBS). Since you will have two routers in series, you will want to reconfigure the AEBS as a bridge. (ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection tab > Connection Sharing = Off (Bridge Mode))

  • How do I connect my airport extreme to wifi as a repeater

    how do I connect my airport extreme to wifi as a repeater?

    Thanks for the info.
    Unfortunately, Apple has designed their routers to only extend or repeat the wireless signal from other Apple routers.
    It would be extremely unlikely that the AirPort Extreme would be able to extend or repeat a wireless signal from another manufacturer's router.
    I suppose that it could not hurt to try, but if the Extreme is still unopened, it might be a better idea to return the Extreme, get the information about the router at the neighbor's and then use a product from the same manufacurer that would be compatible to repeat or extend the wireless.

  • How do I connect my Airport Extreme to an AT

    How do I connect my Airport Extreme to an AT&T U-verse Modem/Router?

    Connect an Ethernet cable between the U-verse router's LAN port to the WAN (circle-of-dots) port on the AirPort Extreme Base Station (AEBS). Since you will have two routers in series, you will want to reconfigure the AEBS as a bridge. (ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection tab > Connection Sharing = Off (Bridge Mode))

  • HT4356 I have an HP 4500 printer connected to airport extreme with usb.  All our portable notebooks print via air but cannot get iPad to be recognized for printing.  Do I really have to have one of the other HPs listed?

    I have an HP 4500 printer connected to airport extreme with usb.  All our portable notebooks print via air but cannot get iPad to be recognized for printing.  Do I really have to have one of the other HPs listed?

    Rufus Cat-
    Even if it was compatible, AirPrint does not work through a USB link, only Ethernet or WiFi.
    I do not see your HP 4500 listed on Apple's list of AirPrint compatible printers.  <iOS: AirPrint 101>  Therefore you need to take another approach.  To start, I suggest you download the free HP App, ePrint Home & Biz.  It has limitations, but should get you printing with your existing setup.
    There are other printing Apps with more features such as Print n Share and PrintCentral, but they can only be accessed from within other Apps that have the "Open In" option.
    Your best option may be to share your computer's printer as AirPrint over WiFi.  Programs that are reported to do that well are Printopia and FingerPrint.  Your computer must be on and awake any time you want to print.  <Printopia for Macintosh>  <FingerPrint for PC and Mac>
    Fred

  • Do I need to connect the AirPort Extreme with a ethnet cable

    Do I need to connect the AirPort Extreme with a ethnet cable

    Hi Tracy,
    I have an airport express connected by ethernet cable to a Netgear modem which is connected to a phone socket. Those devices stay at one end of the house. I can use my MacBook Pro to connect to the internet (by Wi-Fi, no cables) anywhere else in the house.  I hope this helps.
    Ian.

  • How do I connect an Airport Extreme to my ISP with a static IP address?

    I have 5 static IP addresses from my ISP. The cable modem has five ethernet jacks. I run an ethernet cable from separate jacks on th cable modem to the devices listed next. I have one static IP address assigned to a Linksys wireless router for a MS network. Another is used by my VoIP router. I want to use a third static IP address for my Airport Extreme and set up a new network for a server running Leopard Server, iMacs, latptops. When I enter a static IP address in the Airport Extreme, I can't connect to the internet. Can anybody help?

    When you configured your Airport Extreme with one of the five static (and public) IP addresses available to you - did you remember to also configure the Airport Extreme with your ISP's router (or "gateway") IP address as well as the IP address(es) of your ISP's domain name servers?

  • How do I use my airport extreme with my FIOS router?

    How do I use my AirPort Extreme base station with my FIOS Router to extend my network?  I have hard disks connected to my AirPort Extreme and would lik to access them.

    Probably can't answer all your questions - but.... I use a Linksys (wired and wireless) router as my primary entry point for FIOS. I use a Time Capsule and an Airport Express as a common wireless connection. So I have two visibile wireless networks and use them both depending on where I am in the house. Both the TC and AEx can be seen either wirelessly or wired from the entire network. Note - the Linksys provides all the DHCP - you set the apple routers as "bridge mode."

  • How to replace a older Airport Extreme with a newer model? (OS 10.6 w/ Mac Mimi)

    How do I replace a older Airport Extreme with a newer model? (Mac Mini OS 10.6.8 )

    There is not much more to it than to buy a new one, and configure it using AirPort Utility.
    You should be using AirPort Utility 5.6.1.
    Power down your modem before removing your older Extreme and connecting the new one.

  • How do I connect my Airport Extreme to my modem (Cisco Model DPC3010)?

    I am having trouble connecting my Airport Extreme Wireless Base Station to a Cisco Modem (Model DPC3010).  I have used the Airport Extreme for years with other modems with no trouble.  Alas, this time around I can't get it to work.  I think I might not have the cable connected correctly.  Help, please.  Thanks

    I am having trouble connecting my Airport Extreme Wireless Base Station to a Cisco Modem (Model DPC3010).  I have used the Airport Extreme for years with other modems with no trouble.  Alas, this time around I can't get it to work.  I think I might not have the cable connected correctly.  Help, please.  Thanks

  • How do I connect my Airport Extreme 802.11n to Epson 645 Printer?

    I can't figure out how to connect my Airport Extreme 802.11n to my Epson 645 Printer.  Can anyone help me?  Thanks!

    You may want to try reinstalling Mavericks. Airport Utility installed by Mavericks may no longer connect to your older AEBS (though I've not heard that.) Installing the Old AirPort Utility (Version 5.6) on Mountain Lion | frank.is.
    Reinstall Lion, Mountain Lion, or Mavericks
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
         after the chime press and hold down the OPTION key until the boot manager screen appears.
         Select the Recovery HD and click on the downward pointing arrow button.
         Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu.
         Repair the Hard Drive and Permissions as follows.
    After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
         Reinstall Lion/Mountain Lion, Mavericks: Select ReinstallLion/Mountain Lion, Mavericks from
         the Utilities menu, and click on the Continue button.
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                    three times faster than wireless.

  • How to set up multiple Airport Extremes with 1 SSID

    Equipment:
         Office with 2 floors
         1 Modem
         1 Router
         1 Switch
         5 Airport Extremes (2014 models, each in Bridge mode)
    Network layout:
         Modem -> Router -> Switch -> 5 Airport Extremes
    Current Setup:
         Each Airport has their own unique SSID (ex. 1st Floor - Conference, 2nd Floor - Content, etc.). Connectivity is fine with this setup, different users join the closest Airport/SSID to them.  Only issue is that user needs to switch to different SSID's as they move around the office.
    Objective:
         Set each Airport to the same SSID so people don't need to switch to different SSID's as they move around the office.
    Problem:
         I attempted to set each Airport to the same SSID. No issues with the setup, everything looks good in Airport Utiltiy. The problem is that some users connect with no issues, but when other users try to connect, they are asked to input a password, which is repeatedly rejected (even though the passwords are set up correctly on all Airport Extremes, and input correctly on all devices).
         I think this has to do with the 50 wireless user limit on the Airport Extremes, it looks like an Airport is maxed out at 50, and when a device tries to connect, it is rejected. I looked for a way to limit the wireless range on each Airport, but no option exists in Airport Utility.

    Don't know what kind of main router that you have, but try setting the DHCP Lease Time to 1 hour if it is not already set to that limit.
    If it is already set to 1 hour, lower it to the next available setting and update the router.
    Then power off the entire network, then power up the main router first, and let it run a few minutes, then start the AirPorts one at a time about a minute apart.

  • Airport Extreme with Bluetooth 2.0 Wireless Card

    Can anyone recommend a feasible solution to the Airport Extreme with Bluetooth 2.0 + EDR card? I can only find it at Mac-Pro.com and they want a whopping $217 for it - ridiculous. I assume the cost is so high because no one else has them, but alternatively, I may just go with a Wireless 802.11g Compact Wireless USB Adapter and see if it connects.
    Anyone had any luck finding this particular Airport card under $100 or tried alternative means to get a good connection with their wireless router on a PowerMac G5 (Late 2005)?

    The Airport/Bluetooth upgrade kit that you're looking at from Mac-Pro.com is only sold as a replacement part, which is why it's so expensive. Same reason why the replacement video cards are also so expensive.
    Welovemacs.com also has them, but the price is pretty much the same since you need the Airport/Bluetooth card, the runway card, and the standoffs (all provided together in the kit).
    There isn't any selection in PCIe wireless cards for Macs, that I'm aware of. MacWireless.com has a USB stick that'll work and offers 802.11n speeds.

Maybe you are looking for