How do I connect multiple bluetooth devices to macbook pro

Hi,
I would like to connect bluetooth headset(Bose), my Magic mouse together to my macbook pro. 
Also, If possible, I would like to use bluetooh headset and wired headset at the same time.
Is it possible, if yes, could some one guide me.
Regards
Sandy

Multiple Bluetooth devices may be connected to your computer at the same time.
Set up differs from device to device. The Bluetooth set up assistant should find new devices when they are turned on and in range of your computer.
Barry

Similar Messages

  • How do I connect two monitors to my macbook pro?

    How do I connect two monitors to my macbook pro?  This question applies to both DVI and VGA, as I might have to work with multiple sets of monitors.

    The MacBookPro only has enough horsepower in the video card for one external monitor.
    If you want two or more, you need a MacPro.
    Or a MacBook Pro and a Remote Desktop controlled MacMini.
    http://www.apple.com/remotedesktop/

  • How do I connect a camera to my macbook pro when using the computer with an external monitor in clamshell mode?

    How do I connect a camera to the Macbook Pro when using the computer in clamshell mode with an exrternal monitor?

    same as it ever was
    do it like nothing is different.
    be sure to have an external trackpad keyboard or mouse as you will loose them on the computer once it is closed.

  • How do i connect a datalogger to my macbook pro

    How do I connect a datalogger to my macbook pro???

    same as it ever was
    do it like nothing is different.
    be sure to have an external trackpad keyboard or mouse as you will loose them on the computer once it is closed.

  • Can I connect multiple bluetooth devices, to an IOS device

    Hi I have a Logitech Ultrathin keyboard cover, for the new IPad. I'm using the keyboard, all the time my IPad is in use. And sometimes I want to connect my Bluedio R+ bluetooth stereo headset, with bluetooth 4.0 NFC technology. So my question is can I connect both of my external bluetooth devices, at th same time?
    Best Regards Alican!

    Yes.
    Barry

  • Help with my iPhone 5s connecting to bluetooth on my Macbook Pro

    I've tried so many times connecting my iPhone and Macbook via bluetooth but it never works! My computer acknowledges that my phone is there but every time I try to connect, it shows a message that reads, "Network is unavailable - make sure network access is enabled." I've looked up suggestions on how to solve my problem but none of them have been able to help. I'm on a college campus so can't restart my router and I only have an ethernet cord to help haha.

    brenyo wrote:
    I've downloaded the Remote app on my phone but cannot connect the two devices - Remote doesn't show up on my computer's sidebar next to my phone, where it should. Do you know how I can fix this?
    Read this:
    http://support.apple.com/kb/HT1947

  • How do you select multiple files on a macbook pro?

    Can anyone tell me how to select multiple files at one time?  I am so frustrated with the way macbook pro works that I really regret buying it.  I hate that you can't select multiple files, and that my contact stuff keeps changing.  It is certainly not like I was told...that I would never want to use a PC again.  I would not buy another apple computer.  I spent a lot of money to NOT be able to do things that I have always done with ease.  Every time I think I have something figured out, it doesn't work the next time I go to use it in another program.  If anyone has an answer to this, I would sure appreciate it. 
    And all of these so called wonderful updates to the operating system on all mac products have left me frustrated and liking my apple products far less than I did before.  On my iphone I had to make the texts just huge to even be able to see the white writing on a blue background.  Not sure who made these designs, but from my perspective, I can tell you they certainly weren't thinking about being user friendly in any way when they did it.  So disappointed in all of my devices!  I do not enjoy using my computer, ipad, or iphone even close to what I did before.

    This is some information on the Finder.
    http://support.apple.com/kb/ht2470
    To select multiple files you can use the shift key with the mouse if they are in a contiguous list or the CMD key with the mouse if you have breaks in that list. You can also use the mouse to drag over the files you want to select.
    The Macs are easy to use, I have used many versions of Windows, Linux and other operating systems and I find OS X is far the easiest, but that is me.
    There are many instructional videos and texts on Apples web site and if you are near to an Apple store they do classes to help.
    Hope you get used to it.

  • How to set preferred audio output device on macbook pro mavericks

    I've got a pair of Harman Kardon bluetooth soundsticks that I use as my living room speakers. Some time ago, I connected my macbook pro to them via bluetooth, and now whenever I restart my macbook or move it away from the apartment and then move it back, it automatically finds the soundsticks, connects to it via bluetooth, and sets it as the default sound output device.
    I would like the soundsticks to remain connected whenever they're within range, but I want my macbook's internal speakers to be the default sound output even if the soundsticks are connected. I can't seem to set output device preferences in the sound preferences panel.
    thanks,
    - will

    I dont have a solution, but there is a thread on this topic already. https://discussions.apple.com/message/23679152#23679152

  • How do I connect a mixer to my Macbook Pro?

    My macbook pro doesn't have an inline mic outlet, how do I connect a mixer?

    same as it ever was
    do it like nothing is different.
    be sure to have an external trackpad keyboard or mouse as you will loose them on the computer once it is closed.

  • How can I connect 5.1 speakers to Macbook Pro 13 bought Summer 2011

    Hi all
    I am very new to the mac world. Basically I need to know how I can connect my Macbook Pro 13" to a 5/1 set of speakers.
    Do I need something to plug to mini display port?
    Thanks

    saham wrote:
    I conclude that I cannot use any 5.1 Computer Speaker sets that go with my Macbook Pro 13 and get a real Dolby sound,right?
    "Computer speakers" Basically no. They mosty are either stereo analog (for music playback) or 5.1 gaming PC speakers that are married to a 5.1 sound card for PC towers.
    You would have to have a stereo reciever and 5.1 speakers that can accept:
    1: Toslink optical inputs
    2: Decode Dolby Surround Sound
    3: The media your playing back must have a Dolby sound option.
    Most 5.1 computer speaker setups are for gaming PC towers and takes a sound card that does the processing for each channel, has three analog wires
    Wire 1: Left and Right front channels
    Wire 2: Left and Right rear channels
    Wire 3: Subwoofer and center, common ground (returns all the used electrons to complete the loop)
    Your Mac has none of these, it's just a stereo analog, 2.0, a left and right channel, common ground (three sections on the plug)
    So no you can't use a PC based 5.1 system on a Mac, unless you bridge the first two wires either with adapters or splicing the cables. Then it's not true surround sound, just two stereo channels that fills the room with sound.
    With true surround sound, you can hear people creep up behind you, bullets whizz by your face, planes flying past overhead. It's a more immersive experinece.
    So unless the "computer 5.1 speakers" has it's own Toslink optical inputs and decodes Dolby (and other) surround sound formats, has a built in amplifier to power speakers, then no. As most 5.1 comptuer speakers are designed for PC 3D gaming, thus inexpensive.
    The Mac market for 3D gaming is rather small, tiny in fact. I haven't seen any "computer speaker" setup with the required stuff to playback true suround sound.
    Mac's are used for music and video production, that's why they have the better optical ports.
    Your just going to have to buy a home theater system to playback Dolby 5.1

  • Moving Multiple IOS devices From Macbook Pro to iMac

    I just bought a new iMac (switching from a PC ).  I was able to move all of my families music and movies for their iPod Nano's very easily.  I have an iPhone 3GS, iPad 2, two iPod Touches (1G and 4G) and a Shuffle that are currently in separate libraries on my Macbook Pro.  What is the easiest way to move all of these to the new iMac so I can start using the iMac to sync the devices without losing anything.  Is this a multi-step process to move each one individually?
    Any help is greatly appreciated!!
    Thanks,
    Bruce

    Hi, did you try booting the MBP into FireWire target disk mode...
    http://support.apple.com/kb/HT1661
    Or is this not a TB to FW cable?
    Is the MBP running Migration Assistant?
    Does the MBP have a TB port?

  • How do i connect a cinema display to macbook pro

    I got a hand-me-down cinema display from my work for hookup to my macbook pro - there are 4 different connections attached and I don't know what goes where.

    You can connect to a Thunderbolt port with
    <http://store.apple.com/us/product/MB570Z/B/mini-displayport-to-dvi-adapter>
    or the HDMI port with
    <http://www.startech.com/Cables/Audio-Video/Video-Adapter/HDMI-to-DVI-D-Video-Cab le-Adapter-M-F~HDMIDVIMF>
    If the display uses ADC (Apple Display Connector)
    <http://upload.wikimedia.org/wikipedia/commons/0/09/AppleDisplayConnector.jpg>
    you will also need a DVI to ADC adapter.
    <http://www.amazon.com/Apple-DVI-ADC-Display-Adapter/dp/B00011KHT2>

  • How do i connect my bluetooth to my macbook

    i have a motorola elite sliver bluetooth - can this be connected to my macbook - i have it paired with the iphone but wanted to connect to my mac - i have a blue tooth icon...but cant pair it to my phone

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Bluetooth Quick Assist
    http://support.apple.com/kb/HT1153
    -Griff W.

  • How do you use multiple displays with a MacBook Pro and iMac

    I have an iMac and a MacbookPro laptop both upgraded to OS X 10.9 (Mavericks).  I'd like to use multiple displays with them.  Can I do this without an Apple TV?  They are both on the same network.  If I can, can someone please give some instructions on how this can be done?
    Thanks!

    Both computers have ports for external monitors. Check your user manuals. Only one display can be added to the MBP, but newer iMacs have dual Thunderbolt ports.
    Do your own Google research to learn what to do, but reading your manuals should be all you really need. It' not rocket science yet.

  • How to set up multiple monitors on a MacBook Pro

    Does anyone know how I might be able to set up more than one monitor to my MBP?
    Is there a splitter available, or some other means of connecting additional monitors? Any advice would be appreciated. Thanks!

    Hi,
    still the best solution although pricey http://www.matrox.com/graphics/en/products/gxm/dh2go/
    There are some USB-connected graphics expansions avaiable for Mac, but IMHO these are still not up to the task speedwise.
    Regards
    Stefan

Maybe you are looking for

  • Printing passport photos in Photoshop Elements 11.

    I want to print a set of 8 passport photos on a single sheet of A4 paper. I have already sized it as 3.5cm x 4.5cm and I am having problems using Adobe Photoshop Elements 11 in Editor mode. Does anyone know how to do this?

  • Gradient boundary appears printed, but not on PDF?

    Hey guys! Hope you can help me out with this. I'm exporting a PDF from InDesign. The PDF looks fine, but when I print it it appears as if a gradient border has a stroke applied. In InDesign I've confirmed that the stroke is 0, but I'm still getting a

  • Using Special characters in Insert statement

    Hi All, I want to insert special characters in my table. Here is my query insert into COM_TAB(TAB_COMMENTS) VALUES('ADAM'S FARM & FARM-GANG APPLE GOOGLE') .Please help.Also tel me is there any method to handle special characters like using ascci valu

  • Using static variables in JSP

    Hi All, I have written the following code, but its not compiling saying that "Class or interface declaration expected. static " I dotn know whats wrong in this scriplet though.. any help is greatly appretiated. <%@ page language="java" contentType="t

  • My payslip gets emailed to me and opens with fire fox , i can not print it out have tried saving to doc but still opens will not print

    my payslip gets emailed to me and opens with firefox , i can not print it out have tried saving to doc, but still opens with firefox and will not print. The server i have to use for my pay is Explorer( i told them that this would have conflicting thi