How do i connect to the internet with apple tv

how do i connect to the internet with apple tv

Ethernet cable from your router, or configure wifi in Settings.

Similar Messages

  • How do I connect to the internet with my new IPAD ?

    How do I connect to the internet with myt new Ipad

    See here for connecting to the Internet:
    http://support.apple.com/kb/HT1695
    If you have any problems there is troubleshooting advice here: http://www.apple.com/support/ipad/wifi/

  • How do i connect to the internet with my ipad?

    how do i connect to the internet with my ipad?

    Did you turn WiFi on in the Settings App? If WiFi is turned on, your iPad should be able to see any WiFi networks that you can connect to and you should be able to tap on one of those, enter a password if needed and then tap the join button.
    I get the feeling that you know this and the problem needs further explanation so ... Can you explain in more detail?

  • How do I connect to the internet with Airport for the first time?

    I just got my Airport express and I've been trying to configure it to connect to the internet but it doesn't work and I can't find info on the configurations. I have an ethernet "modem" which I used to connect the cable coming from it to the computer and now I connect it to my Airport. Although the green light is on and in network preferences, it tells me I'm connected to the internet, I can't browse the internet with Safari, etc. I've been trying to find information on how to configure the base station in Airport Admin Utility but there is no specific information. Is there anyone who could help me telling me how to set up the IP adress, if I need one, DHCP, preferences in Airport Admin Utility?? If the ethernet cable is connected to the computer directly I don't need a user ID or anything... It's all setup automatically.

    As a minimum, in order to gain access to the Internet with an AirPort Express base station, you will need an Internet Service Provider (ISP) AND an Internet modem or gateway device.
    What is the make & model of the Internet modem or gateway device that you have the AirPort Express directly connected to by Ethernet? What exact model of Express do you have?

  • TS1398 How do I connect to the internet with my iphone when away from home

    I have an iphone 3GS which was fine , was able to connect to the internet away from home when at uni, at appointments. Since software update to IOS 6.0, can now only connect to internet wirelessly when at home-as soon as leave the house it disconnects. Is this just because of the software update? Have tried adjusting settings but got nowhere. Thank you

    When your wifi is off.  Do you see your carrier name at the top left with either 3G/4G.  If not you can try a reset, hold down the home/power button until you see the apple logo and then release, then wait for the phone to boot back up.
    or settings - cellular - cellular data - ON
    if those two suggestion doesn't help then you will need to contact your phone carrier to resolve the issue.

  • How do I connect to the internet with Airport Expess?

    In Airport Utility I get an orange icon and the Airport Express light is green. In the internet box
    coming from the globe picture it says Interent connection Disconnected and there is no router address
    and no DNS server information shown.

    As a minimum, in order to gain access to the Internet with an AirPort Express base station, you will need an Internet Service Provider (ISP) AND an Internet modem or gateway device.
    What is the make & model of the Internet modem or gateway device that you have the AirPort Express directly connected to by Ethernet? What exact model of Express do you have?

  • How do I connect to the internet with the "Manual" PPPoE option?

    Hi,
    I have a Time Capsule and a PC with Windows XP SP3, Airport utility 5.3.2
    I connect to the ISP using a secureID - a password that changes every minute.
    This means that if I use the "Always On" option, then once the connection breaks the time capsule will retry with an invalid password and lock me out.
    I therefore tried the "Manual" option, but there is no "CONNECT" button associated with it. When I choose "Always On", the time capsule connects to the internet. When I choose "Manual" the time capsule has a happy green light, but I don't have internet.
    Did somebody forget to put a "connect" button somewhere, or is it just hiding?
    Any help appreciated.
    Thanks,
    Omri

    Ethernet cable from your router, or configure wifi in Settings.

  • How do I connect to the internet with a datacard?

    Hi, I have just brought a mac book pro and am in the process of finding an ISP. I don't have a BT line and don't want to pay for one, so it narrows down my options! I have checked out NOW wireless internet and cable but they don't work in my area (NW2 london). I don't have a sky box. So looks like the best option for me would be a datacard I could plug into my laptop. Only prob is that most of the major ph companies only have the PCIMA cards which won't work in the new macs. Vodafone is bringing out a new card in autumn which will work, but does anyone know anyone who makes cards which will work on my mac now?
    Thanks so much!! I have looked long and hard on internet and can't find any!

    I got the same problem, when I change my Powerbook to a Macbook pro... The answer, is there is no datacard available... not yet..
    The solution is to have a bluetooth phone that support 3G... (GPRS is a bit slow)
    So, just follow the instruction on that website to set-up your connection...
    http://pukupi.com/articles/vodafone/
    You still have to get from vodafone some information if you don't have them... Make sure you ask them the good question, sometime the techi guys freak out when you say you want to connect a MAC...
    what you need is :
    GPRS CID String
    Username
    password
    In Ireland it's as follow :
    GPRS CID String : *99#
    Username vodafone
    password vodafone
    you could try... if it work, you are in... Make sure you watch the data you transfer, it can get VERY EXPENSIVE... I would suggest Email access only... try avoid downloading file.
    Hope it help.
    MCBP 2.16   Mac OS X (10.4.7)  
    MCBP 2.16   Mac OS X (10.4.7)  

  • WRT 120N- Cannot connect to the internet with more than one PC at a time.

    Before I went on a three month vacation,I could connect 3 or 4 PC's either wireless or wired to my router with no problems at all.I have a desk top and a laptop computer which I use at home.After I returned,I found that I could connect to the internet with only one PC at a time.
    If I was say,connected via my laptop,my desk top would continuously keep getting disconnected and vice versa.I have been reading the suggestions from experts here and have done a few checks based on them.I also cannot get to my router page which is 192.168.1.1 I keep getting a message that says "Problem Loading Page" and this happens with both,Firefox and Internet Explorer.I am running Windows 7 - 32 bit on my desk top and Vista Home Premium on my laptop.
    I have opened the "Command Prompt" dialogue and pinged 192.168.1.1 and thereafter I typed in "ipconfig".These are the results:
    Microsoft Windows [Version 6.0.6002]
    Copyright (c) 2006 Microsoft Corporation.  All rights reserved.
    C:\Users\Gordon>ping 192.168.1.1
    Pinging 192.168.1.1 with 32 bytes of data:
    Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
    Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
    Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
    Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
    Ping statistics for 192.168.1.1:
        Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
        Minimum = 0ms, Maximum = 0ms, Average = 0ms
    C:\Users\Gordon>ipconfig
    Windows IP Configuration
    PPP adapter Brownwolf:
       Connection-specific DNS Suffix  . :
       IPv4 Address. . . . . . . . . . . : 92.98.42.65
       Subnet Mask . . . . . . . . . . . : 255.255.255.255
       Default Gateway . . . . . . . . . : 0.0.0.0
    Ethernet adapter Local Area Connection* 22:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Wireless LAN adapter Wireless Network Connection:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : 2002:5c62:2a41:c:35a2:8753:8832:f494
       Site-local IPv6 Address . . . . . : fec0::c:35a2:8753:8832:f494%2
       IPv6 Address. . . . . . . . . . . : 2002:5661:4cc9:c:35a2:8753:8832:f494
       Temporary IPv6 Address. . . . . . : 2002:5661:4cc9:c:a408:59a3:918e:f0ab
       Temporary IPv6 Address. . . . . . : 2002:5c62:2a41:c:a408:59a3:918e:f0ab
       Link-local IPv6 Address . . . . . : fe80::35a2:8753:8832:f494%12
       IPv4 Address. . . . . . . . . . . : 192.168.0.1
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . :
    Ethernet adapter Local Area Connection:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : 2002:5c62:2a41:c:413:cf4f:77af:474d
       Site-local IPv6 Address . . . . . : fec0::c:413:cf4f:77af:474d%1
       IPv6 Address. . . . . . . . . . . : 2002:5661:4cc9:c:413:cf4f:77af:474d
       Temporary IPv6 Address. . . . . . : 2002:5661:4cc9:c:1591:ad9:13da:8fea
       Temporary IPv6 Address. . . . . . : 2002:5c62:2a41:c:1591:ad9:13da:8fea
       Link-local IPv6 Address . . . . . : fe80::413:cf4f:77af:474d%11
       IPv4 Address. . . . . . . . . . . : 192.168.1.100
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : fe80::35a2:8753:8832:f494%11
                                           192.168.1.1
    Tunnel adapter Local Area Connection* 7:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Tunnel adapter Local Area Connection* 11:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Tunnel adapter Local Area Connection* 14:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Tunnel adapter Local Area Connection* 15:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Tunnel adapter Local Area Connection* 19:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Tunnel adapter Local Area Connection* 20:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : 2002:5c62:2a41::5c62:2a41
       Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301
    Tunnel adapter Local Area Connection* 23:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Tunnel adapter Local Area Connection* 24:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Tunnel adapter Local Area Connection* 28:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    I presume that this model is a modem **bleep** router as I do not have a separate modem with my system.I have a DSL connection and the firmware version of my router is ver.1.0.If I recall,I did upgrade to the next firmware upgrade a few months after I purchased the router but I am not sure.
    I use both my PC's to run a small business venture and I am worried that resetting the router may cause some other problems and will stop me from using the internet.
    The Command Prompt information above was taken from my laptop.
    Any help will be really appreciated.
    Gerard.
    Solved!
    Go to Solution.

    brownwolf66 wrote:
    No,I have a desk top and a laptop and I cannot access 192.168.1.1 on either of them.In my OP,I have used the Command Prompt dialogue on both computers to ping 192.168.1.1 and I have attached the results.This is what I got:
    Microsoft Windows [Version 6.0.6002]
    Copyright (c) 2006 Microsoft Corporation.  All rights reserved.
    C:\Users\Gordon>ping 192.168.1.1
    Pinging 192.168.1.1 with 32 bytes of data:
    Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
    Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
    Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
    Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
    Ping statistics for 192.168.1.1:
        Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
        Minimum = 0ms, Maximum = 0ms, Average = 0ms
    The results I obtained using ipconfig in the command prompt have already been mentioned in my OP.
    I do not know if the above result is what it is supposed to be but I still cannot access my router's home page.How do I verify if there is a proxy server and if there is one,how do I disable it in my browsers?This problem occured suddenly as a few months earlier all was well.It's getting rather frustrating.
    I suggest resetting the router. Make sure firmware is updated. You can download it here - http://homesupport.cisco.com/en-us/support/routers/WRT120N. After firmware upgrade, reset and reconfigure. Just access the link below to guide you setting up the router.
    * Setting up a Linksys router for DSL Internet connection
    http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=20ee1457387f40178cd5f41d4b585db4_3687.xml&pid=80&r...
    * Setting up a Linksys router with Cable Internet service
    http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=0ff4c94586a345d082828ec2161aaecf_3686.xml&pid=80&r...

  • My imac and ipad2 will not connect to the internet with Windstream using an 2wire DSL modem.

    Help my brand new imac and ipad2 will not connect to the internet with Windstream using an "2WIRE" DSL modem.  Windstream tech service is useless.  i can connect with the built in router through Ethernet or wireless, but still no connecting to internet, help!  windstream said everything is working on their end, yea right.  What i do know is that both the mac and ipad work at other places and can connect with wireless connected to the internet, so i know it's not the apple products. 
    these are brand new machines with lion.
    This is my first mac, so I’m still new to how it works, which is not helping either so a detailed help would be great.  Please help before my wife losses it
    thanks

    There is a 2701HG-B, and a 2701HG-D.  If not labelled on the modem, ask Windstream which one they presently supply or how to tell the difference.
    By the way tell your wife it isn't that bad.  At least you have an ethernet DSL modem.  There were times where DSL modems had RJ-11, USB, and Ethernet, and all three were used to provide access.  At least now only the craziest DSL providers still use those modems.

  • Can no longer connect to the internet with the 580...

    Hi, my PC was able to connect to the internet with my 5800 via a USB cable.  Now, I can no longer connect to the internet with the 5800 via a USB cable. 
    I had never tried connecting the computer to the internet with the 5800 via Bluetooth prior to this incident, so I tried that.  Strangely, it works.  
    My question is how come I can no longer use the 5800 via USB as a modem, but how come the 5800 via Bluetooth still works as a working modem?
    Sorry, if my sentences are confusing.  I have a terrible headache at the moment.  While the Bluetooth connection works, I just feel better using the USB connection and knowing that my 5800 has a clean bill of health. 
    BTW, my PC is on Windows 7 Professional at the moment.  I've tried uninstalling the Ovi Suite and reinstalling it, but that didn't work.  I've also tried using PC suite instead of the Ovi Suite but that didn't work either.  What other options do I have, beside hard resetting the phone?  Thanks in advance.        
    Edit: BTW, the message shown when I tried to connect to the internet with the 5800 USB modem was "failed to establish a network connection". 
    Solved!
    Go to Solution.

    Hi,
    I am so  much tierd by trying to connect my phone to pc.
    I have nokia 5800,and I used to connect my phone to PC by USB cable.
    But from last 5 days I could not able to connect it.
    The problem is that,
    when I connect phone to pc,notification comes up that phone connected via ovi suit,but within  a minute or 2,
    "porable device" icon disappears from the task bar in the right hand corner,so connection could not proceed further.
    Please help me in this asap.
    I had tried following already:
    1.format my PC
    2.Installed new ovi suit
    now please give me a proper solution on that.
    thank you.

  • How does Imac connect to the internet?

    How does Imac connects to the internet?

    Through your ISP (internet service provider); once you set up an account with them, you can decide to connect via ethernet cable to their modem, or, if you have a router (which is connected to their modem, you can connect wirelessly.
    Is that what you were wondering about or did I misunderstand your question?

  • Can't connect to the internet with airport or firewire

    I can't seem to connect to the internet with airport or firewire. I recently restored my old G4 mac mini PPC 1.42 (with airport and bluetooth) Tiger 10.4.8 with a new harddrive. I have it connected to my leopard mac pro, internet sharing is on (both computers), the systems are connected, however, the mini just can't connect to the internet. tried it also using airport, no go. network diagnosis seems to go in a constant loop.

    works ok with ethernet connection though.
    that'll work.

  • Can I connect to the internet with an Ipad in Santo Domingo, DR while I'm on vacation?

    Can I connect to the internet with an Ipad in Santo Domingo, DR while I'm on vacation?

    Lots of hotels in the DR have WiFi. And there is plenty of cellular coverage in Santo Domingo (and elsewhere).
    One thing to be careful of, the WiFi networks are usually not secured and are very vulnerable to people "listening" for passwords and user names, so don't do any financial transactions online and perhaps consider setting up some temporary passwords for the trip and changing them when you get home.
    -dan

  • Unable to connect to the internet with my Fujitsu ...

    Ive just got a Home Hub 4 and have connected it to my laptop, a Fujitsu Esprimo V5535. But it is only giving me Local Only Access. Which means I cant connect to the internet. The Home Hub is working fine as my netbook and other mobile devices are all connected ok but my laptop isnt.... Is there anything I can do to resolve this?

    Did it connect to the Internet with your old homehub?
    Make sure the network card drivers on the laptop are up to date using the manufacturers website rather than Windows which can be out of date. You will need to connect by Ethernet cable to download them or download them on another device and copy them over.

Maybe you are looking for

  • A simple problem that confounds me....

    Hi everyone, Im hoping this is a painfully simple mistake Im making, and not a profound one. My goal is to pring out a diamond display, and this is the code Ive written so far. If anyone can point out what might be wrong with it I would appreciate it

  • Falcon 4.0 Allied Forces does not work with Mountain Lion and Nvidia 650M

    I have the new Imac with Mountain Lion and the base, built in Nvidia GeForce 650M card.  I bought the Falcon Allied Forces game app from the app store, but the in-game graphics are unusable, pixelated, and generally garbage.  It does not appear there

  • Permagent space in WebLogic 10.3...

    I have permanent space in Weblogic 10.3. I think that I need to change -XX:MaxPermSize=128m from these parameters: JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize= 48m -XX:MaxPermSize=128m I think correct? And where I

  • Launching BEx query in the Internet

    Hi, I have a query having variables Company Code and Fiscal Period/Year. I run it and it generates and shows the selection screen . I fill the selections and it displayes the results fine in Excel . However when I am trying to run the same query usin

  • Business Content Install - Don't Understand Error

    I am trying to install InfoCube 0papa_c02 (HR InfoCube).  No active version of this cube exists in our system (BW 3.5).    I'm doing a simulation and chose "Only Necessary Objects."  The simulation fails because of this error: InfoObject 0DATEBIRTH i