How do I copy files from Mac Book Mountain Lion 10.8.3 to a Seagate External Hard Drive

please help

Have you connected the drive to your computer?  Is the drive formatted for a Mac?  Can you see the drive either on the desktop or in the sidebar of a Finder window?  Are you able to (double) click on the drive icon to open it up in Finder? If yes to these, you should just be able to drag and drop.
charlie

Similar Messages

  • How can I restore files from a time machine back-up of my iMac to an EXTERNAL hard drive connected to MacBook Pro. Using Migrat

    I would like to restore files from a time machine back-up of my iMac to an EXTERNAL hard drive connected to MacBook Pro. When I tried using Migration Assistant it only gives me my internal hard drive as an option to restore to. The internal hard drive on my macbook isnt large enough to store the files.

    Welcome to Apple Support Communities
    OS X can only restore data to the drive where Time Machine backed up files from.
    If you want to restore files from the Time Machine backup onto an external drive, your only option is to access to the Time Machine drive manually (open a Finder window and choose your Time Machine drive in the Finder sidebar), navigate through its folders and copy the files you want to the external drive

  • I have Mountain Lion OS Install CD downloaded onto my external hard drive, how do I use this to upgrade from Leopard

    Current computer that I just bought used is operating on Leopard 10.5.8
    I have Mountain Lion OS X CD installation files downloaded on my external hard drive from another Mac that I have owned.
    How do I use my external HD to download and Install Mountain OS X wizard.
    Is the only way to do this to buy a copy of snow leopard and then once upgrading to that, plug in my external HD and then access the Mtn install file as I would if I had the installation CD?
    When I try to access the install file from my external HD, i get to the installation window and then when I am to select a hard drive to install it on I receuve a red exclamation mark error that says it can not be written to the HD. Why is this? Because I'm not on snow leopard but rather leopard?

    As you have the installer on a DVD, you can do a trick that consists in formatting the hard drive, and then, install Mountain Lion.
    First, make a backup of your files with Time Machine > http://support.apple.com/kb/HT1427 I recommend Time Machine because it will be easier to restore your files later.
    Then, insert the DVD with Mountain Lion and hold the C key while your Mac is starting, so you will see a window with different options. Open Disk Utility, choose Macintosh HD in the sidebar, go to Erase tab and erase the drive.
    After erasing the drive, you can install Mountain Lion. Close Disk Utility and install it. During the initial setup, it will ask you to restore your files, so plug the external drive with the backup and follow its steps. Note that PowerPC apps aren't compatible

  • I recently updated to Mountain lion 10.8 . I backuped using external hard drive using time machine . I used Lacie drive. I had to format it MAC OSX " extended journaled" before I could back up my dat and after that I backed it up.

    1) I cant seem to restore my data back from Time machine as many files seem Locked. I cant use the Migration app since it doesnt show me my external hard drive when I try to use it. Plus Ive heard that Migration app copies whole drives rather than selecting and copying some folders/data.
    2) Even if i use the time machine to restore the data , It does copy on to my mac but that locked symbol is still there .
    3) I have read that my drive wont show on migration application cuz the OS should be same before and after the backup and there shouldnt be any difference , otherwise the migration app wont show the drive. This is absurd cuz mostly ppl back up because they want to upgrade their computers . It will never be the same , I mean the OSX , cuz after i have done the back there would have been an upgrade .
    Can anyone help Linc Davis .

    If you mean you're getting the same message:
    see #C3 in Time Machine - Troubleshooting.   It will show you how to locate the message(s) that describe the problem, then help you fix it.    If that doesn't help, post back with details, including all the messages, your setup (especially the destination for the backups), what you've done, and the results.
    If that's not the message you're getting, please clarify.

  • How do I copy files from my old mac to my new mac?

    How do I copy files from my old mac to my new mac?

    Use the Migration Assistant, or the Setup Assistant, or use a network, Target Disk mode, or an external drive to move them manually.
    (126811)

  • I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac

    I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac. How do I do this? Where do I put these files on my Time Capsule? Will it affect the functioning of my Time Capsule?

    Mixing files with data is not always great idea.
    See info here.
    Q3 http://pondini.org/TM/Time_Capsule.html
    Why not just connect the PC directly to the TC by ethernet and copy the files over?
    It is hugely faster and much less mucking around.
    In windows load the airport utility for windows.. if you have not already as this will help you access the drive.
    There is more info here.
    http://support.apple.com/kb/HT1331

  • How can i copy files from one external hard disk to another using macbook pro with retina display

    How can i copy files from one external hard drive to another using macbook pro with retina display?

    That's odd - if you open Disk Utility (Applications->Utilities) and select the disk(s), how are they formatted? If you're only going to be used with your Mac, they should be formatted as "Mac OS Extended (Journaled)".
    Clinton

  • How do I copy files from my old pc to my new imac?

    how do I copy files from my old pc to my new imac?

    There are many methods, however you are specific about the type of files you want to move. The first time your Mac turns on it begins with Setup Assistant and asks if you want to migrate from another Mac or PC, you must have missed that. I'd recommend looking over Pondini's Guide and following the directions for using Migration Assistant. You can find them by clicking How to Use Migration Assistant From PC to Mac 10.7 Lion.
    If you have specific files you are attempting to migrate then moving them to an external HD and then just dragging and dropping them from the EHD to the Mac would be very simple. Apple explains migration strategies in Switch 101

  • How do i copy files from my macbook pro to my hard drive? These files were previously started on my old dell.

    how do i copy files from my macbook pro to my hard drive? These files were previously started on my old dell.

    More then likely that external drive is formatted the Windows NTFS format which Mac OS X can Read but it can not Write to that format. So you would need to copy all the data off that drive, to either a Windows PC or to your Mac, thenn use the Mac to format it for the Mac OS. Which would be Mac Extended (Journaled) with a Partition Table of GUID.
    If you want to use that drive on both Mac and PC then you would need to format it either FAT32 or exFAT.

  • How do i copy files from my macbook pro to a usb drive

    how do i copy files from my macbook pro to a usb drive

    Connect USB drive to your MBP, format as "Mac OS Extended (Journaled)" with a single GUID partition using Disk Utility and copy away.
    Clinton

  • How do you copy files from one user to another

    How do you copy files from one user to another user on the same machine?

    open your home folder in finder move file to public, log into other account, click the go tab on the finder menu, select computer, your hard drive (Macintosh HD Default)>Users, the origonal user> public and drag that file to your specified folder.
    hope it works
    Craig.

  • I have a seagate external hard drive with files copied from windows pc. If I will download NTFS driver from seagate to my mac, could I install it safely without harming my files in the external hard drive? I am afraid I may erase all files in there.

    I have a seagate external hard drive with files transferred from my windows pc. If I will download NTFS Driver from seagate to my mac, could I install it safely without harming my files? I am afraid.. I might erase all my important files during the installation..

    Thanks a lot! I have already downloaded Paragon Driver and it works well with seagate external hard drive. I am copying as of now my important files from my mac to it. However, I have only the trial version which will expire in 10 days. I don't have credit card to buy for it.

  • How do I copy files from a seperate hard drive to Bridge

    How do I copy files from a seperate hard drive and paste them to Bridge

    Bridge is just a file Browser, nothing more and nothing less.  It doesn't create folders of its own and it doesn't keep image files in the application itself.
    You don't "paste" anything "into" Bridge.  You just navigate Bridge to the other drive where the images are, point it toward said files, and Bridge will show them to you.
    Once you find your files, you can use Bridge to move them or copy them to wherever you want.  They will never be "inside" Bridge.  As soon as you disconnect the other hard drive, Bridge will have no record of them unless you copy them over to a drive that is always attached to your computer, such as your boot drive or another internal drive.
    Recapping;  Your images are never in Bridge.

  • How do i save files from mac pro to an external hard drive

    how do i save files from mac pro to an external hard drive

    Your external drive is formatted NTFS which OS X can read from but not write to. You can either install third-party software on the Mac to enable writing to the drive or repartition and reformat the drive for exclusive use with the Mac. If you don't need to move files between a Mac and a PC, then I would recommend the latter solution.
    Tuxera NTFS 2012.3.2
    NTFS for Mac OS X 9.5.3
    To repartition:
    Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select the external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

  • Copying files from Mac to PC network shared drives.

    Copying files from Mac to PC network shared drives.
    We have shared mounted drives in AIX Fusion that we can pull files from and copy to the mac, however we can not copy files from the mac to the drives.
    “Error in user parameter list (-50)” With MS DOS-Formatted Volume.”
    The drives are mapped on the mac using SMB. We can go to the files on the mac and use “save as” and this works and saves them on the shared drives.
    We can not drag and copy them to the shared drives. Every time it fails and we get the above error. We can create folders but not move any files.
    When we look up the error, it is referring to certain characters that can but used in a Max OS X filename and are not allowed in MS-DOS filenames. We are not using any of the characters not allowed.
    The drives have all the basic set up in AIX, RWC. All the PC's we have can drag files to and from all our shared drives.

    Either install software which enables the Mac to write to NTFS drives, or MacDrive on the PC, or reformat any drives you'll be using to share files between the computers as either FAT32 or exFAT.
    (88270)

Maybe you are looking for