How do I copy Secure Notes from one computer to another in Lion?

How do I copy Secure Notes from one computer to another?
Keychain sync is no longer available

Move the entire keychain to any location on the new computer and double-click it. You can then drag the notes from one keychain to the other.
(64538)

Similar Messages

  • HT1349 How do I copy my playlists from one computer to another?

    How do I copy my playlists from one computer to another? Both Acer.

    The playlists are contained in the iTunesLIbrary.itl file.
    If you are moving your library from one computer to another, simply copy the ENTIRE iTunes folder from the old computer to the new computer.

  • How do I copy LR defaults from one computer to another?

    Sorry, this has probably been asked a billion times but I couldn't find a search "key" that would give an answer.
    I'd like to simply copy the "default" process settings for our cameras from my desktop to my laptop ... it seems it ought to be logical and easy and I can't find it. Feeling really stupid about now. Sheesh!
    Neil

    If they're Develop Presets then John's method works. However, if they're saved Camera Defaults using the Set Default Settings... command then you will need to copy the Camera Raw "Defaults" folder across.
    Edit: it looks like you posted while I was typing.
    The files you want are located within the  Users\~\Library\Application Support\Adobe\CameraRaw\Defaults subfolder  (Mac). On Windows they're in the Documents and Settings\Administrator\Application Data\Adobe\CameraRaw\Defaults

  • How can I copy cell formatting from one range to another?

    How can I copy cell formatting from one range to another, including text fonts, colours, borders, etc., so that, for example, I can reuse a formatted reconciliation table again in different parts of a sheet?

    Hi George,
    Wayne found the Spinning Beachball of Death, and you will find it too.
    Numbers is not good at handling large datasets. Might I suggest that you group your data into smaller sets (each month, perhaps?) and save each group in a separate Numbers document. Numbers will not link between documents, but you could have a summary Table within each document. Then comes the "clunky" bit of copying all those summary tables into a master document where you do the final processing of the data.
    Regards,
    Ian.

  • I have no problems copying iMovie Events from one Mac to another, however, how can I copy iMovie Projects from one Mac to another?

    I have no problems copying iMovie Events from one Mac to another, however, how can I copy iMovie Projects from one Mac to another?  Any help will be appreciated.  Thank you.

    This should give you some good insight, I'd probably store them on an External HD on the old machine and then just drag and drop to the new machine.
    https://discussions.apple.com/docs/DOC-4141

  • HT1296 how do I transfer my Itunes from one computer to another?

    how do I transfer my Itunes from one computer to another?

    If you are just trying to bring over your music, can just take the iTunes folder located in your USER Music Folder and copy that to the same place on your new computer.  run iTunes and your music will be there. 

  • How do I transfer my bookmarks from one computer to another? I have Firefox Home on my phone and I can get them there, but I want to have the same bookmarks on my home computer as I do on my work computer.

    How do I transfer my bookmarks from one computer to another? I have Firefox Home on my phone and I can get them there, but I want to have the same bookmarks on my home computer as I do on my work computer. If I have a user name then where do I sign into Firefox, it should be that easy but I can't seem to figure it out.

    Hey susanneyes,
    Sounds like you want to set up Firefox Sync. This will allow you to keep all of your instances of Firefox synchronized. Just follow the steps in [https://support.mozilla.com/en-US/kb/what-firefox-sync?s=sync&r=0&as=s this article] and you'll be set.
    Hopefully this helps!

  • How do i move my photoshop from one computer to another on windows 7

    how do i move my photoshop from one computer to another on windows 7

    You don't move anything, you install from scratch. Just make sure to run Help --> Deactivate on teh old system.
    Mylenium

  • How do I copy a photo from one folder to another one in Aperture

    I'm old and feeble      I cannot figure out how to copy a photo from one folder to another folder   and my 13 year old grandson can't figure it out either, so I feel better about it
    thanks
    canonmick

    Um ... that doesn't seem ... like a useful workflow.  When you say "folder" do you mean a Folder in Aperture (shown on the Library tab of the Inspector) or a folder in Finder?  They are not at all the same thing.
    Aperture is an image manager, with the requisite file management built-in.  Finder is a file manager.
    If you provide a full description of what are doing, and what you are trying to do, someone here can set your straight.
    Fwiw, IME, the learning curve if very long and uphill, but gentle.  What's unusual (esp. for Apple products) is that the landmass of Aperture is separated from the rest of your computer knowledge by a moat.  What I mean is, the first leap is the hardest.  After that, you'll be on firm ground, ready to explore.

  • How do I copy the style from one control to another?

    I need to programmatically copy the style from one graph to another. I'm currently using the importstyle and export style functions but I'd like to avoid that since: 1) I'm creating >100 of the same graphs in a scrolling window and execution time is a concern, and 2) it makes it harder to redistribute the application, and 3) you shouldn't have to import/export from disk just to copy a graph style.
    I noticed the copy constructor was disabled so you can't just create a new one from the original. I suppose I could iterate through all the styles and transfer them from the master graph to all the copies but is there an easier way to do that? If not, is there some sample code for that?
    I'm using MStudio 7.0 for C
    ++.
    Thanks,
    -Bob

    One way that you could do this would be to create a helper method that configures your graph rather than configuring it at design-time, then use that helper method to apply the settings to the new graphs that you create. However, this would only work if you wanted all graphs to be configured exactly the same way - this would not work if the settings of your master graph are changing at run-time and you want the new graphs to be configured with the current settings of the master graph.
    Another approach is to query each control for IPersistPropertyBag, create an IPropertyBag, pass the IPropertyBag to the master graph's IPersistPropertyBag:ave, then pass the IPropertyBag to the new graph's IPersistPropertyBag::Load implementation. I'm not aware of any implementations of IPropertyBag that are readily available for use in applications, so the tricky part is creating the IPropertyBag. Below is a very simple implementation of IPropertyBag that should be enough to get the job done for this example. First, add this to your stdafx.h:
    #include <atlbase.h>
    CComModule _Module;
    #include <atlcom.h>
    #include <atlcoll.h>
    Here's the simple IPropertyBag implementation:
    class ATL_NO_VTABLE CSimplePropertyBag :
    public CComObjectRootEx<CComSingleThreadModel>,
    public IPropertyBag
    private:
    CAtlMap<CComBSTR, CComVariant> m_propertyMap;
    public:
    BEGIN_COM_MAP(CSimplePropertyBag)
    COM_INTERFACE_ENTRY(IPropertyBag)
    END_COM_MAP()
    STDMETHODIMP Read(LPCOLESTR pszPropName, VARIANT* pVar, IErrorLog* pErrorLog)
    HRESULT hr = E_FAIL;
    if ((pszPropName == NULL) || (pVar == NULL))
    hr = E_POINTER;
    else
    if (SUCCEEDED(::VariantClear(pVar)))
    CComBSTR key = pszPropName;
    CComVariant value;
    if (!m_propertyMap.Lookup(key, value))
    hr = E_INVALIDARG;
    else
    if (SUCCEEDED(::VariantCopy(pVar, &value)))
    hr = S_OK;
    return hr;
    STDMETHODIMP Write(LPCOLESTR pszPropName, VARIANT* pVar)
    HRESULT hr = E_FAIL;
    if ((pszPropName == NULL) || (pVar == NULL))
    hr = E_POINTER;
    else
    m_propertyMap.SetAt(pszPropName, *pVar);
    hr = S_OK;
    return hr;
    Once you have a way to create an implementation of IPropertyBag, you can use IPropertyBag and IPersistPropertyBag to copy the settings from one control to another like this:
    void CopyGraphStyle(CNiGraph& source, CNiGraph& target)
    LPUNKNOWN pSourceUnknown = source.GetControlUnknown();
    LPUNKNOWN pTargetUnknown = target.GetControlUnknown();
    if ((pSourceUnknown != NULL) && (pTargetUnknown != NULL))
    CComQIPtr<IPersistPropertyBag> pSourcePersist(pSourceUnknown);
    CComQIPtr<IPersistPropertyBag> pTargetPersist(pTargetUnknown);
    if ((pSourcePersist != NULL) && (pTargetPersist != NULL))
    CComObject<CSimplePropertyBag>* pPropertyBag = 0;
    CComObject<CSimplePropertyBag>::CreateInstance(&pPropertyBag);
    if (pPropertyBag != NULL)
    CComQIPtr<IPropertyBag> spPropertyBag(pPropertyBag);
    if (spPropertyBag != NULL)
    if (SUCCEEDED(pSourcePersist->Save(spPropertyBag, FALSE, TRUE)))
    pTargetPersist->Load(spPropertyBag, NULL);
    (Note that "CreateInstan ce" above should be CreateInstance - a space gets added for some unknown reason after I click Submit.)
    Then you can use this CopyGraphStyle method to copy the settings of the master graph to the new graph. Hope this helps.
    - Elton

  • How do I copy a list from one site to another that has a column that appends changes to existing text?

    I want to move a list from one SharePoint site to another, within the same collection. I have created a template and included the content but the column that is selected to append changes to existing text, has not copied in all cases, although it has for
    some items.
    I have a limited knowledge so won't be able to implement any solutions that require the use of code.

    Hi,
    According to your post, my understanding is that you wanted to copy a list from one site to another that has a column that appends changes to existing text.
    I recommend to use the custom workflow activity  Copy List Item Extended Activityto
    copy list items and files cross site.
    You can do this with codeless SharePoint Designer workflows as long as you can install the
    Codeplex Custom SharePoint Designer Workflow Activities. 
    These activities are also built-in to SPD2010.
    To install the custom activities, please follow the steps as below:
    Download the solution file form
    Useful Sharepoint Designer Custom Workflow Activities
    Copy the wps file to the Disk C.
    Open the SharePoint 2010 Management Shell.
    Run the command: add spsolution c:\ dp.sharepoint.workflow.wsp
    Open the Center Administration, click System Setting->Manage Farm Solution-> dp.sharepoint.workflow.wsp->Deploy to one or more Web Application.
    Open the SharePoint designer, add action from Custom Actions.
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • How do i copy a layer from one psd to another

    how do i copy a layer from one psd to another

    Select...Select All, Ctrl+C to copy the contents to the Clipboard, then in the other PSD image use Ctrl+V to paste the contents in on its own layer.
    Ken

  • How can I copy GPS information from one image to another?

    I bought a Canon S100 specifically for its GPs and movie capability.  On a recent vacation, I used the S100 and a Nikon D300.  In cases where images were taken with both cameras in approximately the same place, I would like to copy the GPS information from the S100 CR2 files to the D300 NEF files.  Does anyone know how to do this or if there is any plugins that will do it?

    The added benefit of using GeoSetter to copy the information from one photo to another, is that you can see where every already-tagged photo is on a Google map to make sure the location is actually correct.  Sometimes the camera clock is off a few seconds or minutes and you can easily figure how what offset to use by watching where the existing photos show on the map.
    Using the MS Pro Photo Tools to generate a track from the existing S100 photos and then using that track in GeoSetter to assign the rest, with interpolation enabled, seems like the best course of action if the S100 track information is no longer available.
    When using an external program to Geotag images that are already in LR, to be safe you should first save all the metadata to XMP files in the folder you’re going to tag, then exit LR, then geotag the photos, then restart LR and read information from all the XMP files.
    Another benefit of GeoSetter is that you can assign the locality information to the photos that already have just coordinates in them.

  • Copying iweb pages from one computer to another

    I have iweb pages operational on a G5.
    I want to transfer them to iweb on my macbook instead.
    I don't want to re-create them from scratch.
    I have a .mac account.
    Both iweb programs are the same version.
    This is a mac! There must be an easy way to copy the web pages from one computer to another!
    I explored the domain file route, copied the file from my G5 to the macbook, and did not get the pages I wanted. Instead I got the start page template. My information was not there.
    Any help out there?

    All your information is in a single file called "domain"
    By default it should be located in your
    user/library/application support/iWeb/ folder.
    Find it, copy it, and move it to the new computer.
    The first time you use it on the new computer double click the newly moved "domain" file to start up the iWeb application. Once you do that iWeb will remember that that is the file to open on start-up.
    I use multiple computers to edit iWeb and to avoid confusion as to which "domain" file is the most recent, I just keep it on a flash drive. Be sure to keep "domain" backed up safely on your computers and off (CD disks, external hard drives, etc) because if you lose that one file, you've lost all your work. iWeb cannot edit published pages.
    The reason you got blank pages is that you have to double click on the newly moved "domain" file to start up iWeb. Otherwise iWeb will start from the blank "domain" file that is already on the computer. You can have many "domain" files on the computer, If you start the iWeb application by clicking the iWeb icon, it will open the last "domain" file edited on that computer, which isn't the one you just moved. There is no other way to access your work.
    Good luck, David
    ibook & imac   Mac OS X (10.4.8)  

  • How do you get all downloads from one computer to another

    How do I get everything on iTunes from one computer to another?

    You've posted to the iTunes Match forum, which your question isn't really related to. However this KB article will help:<http://support.apple.com/kb/HT4527>.

Maybe you are looking for