How do I create a new template without creating a new document?

I already have my document typed up but I would like to create a new template in the same document I'm using but when ever I do, it creates a new window claiming it's a new document. Suggestions?

Be careful on unlocking and deleting stuff, cause this very easily can destroy the layout and your current arrangement
About dimensions, If i am not mistaken, i read on another thread that this cannot be happen.

Similar Messages

My previous method for payment on itunes was debit card but now I dont have one. How do I change to no card without creating a new apple id

My previous method for payment on itunes was debit card but now I dont have one. How do I change to no card without creating a new apple id? It tells me to update payment details when I try to update apps but it only has visa, mastercard, amex and maesto. I dont have any of them. I did previously use visa but I dont have the card anymore and cant get another one. Please can someone help me set it up so I dont need a payment method. Thanks

Thanks for you reply. Is that the only way as it would cost me £15?

I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?

I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software

Is it possible to open a new Worksheet without creating a new *.sql file

Hello Community,
Declaimer: It may be a trivial question. I just willing to make SQL Developer my default day to day tool.
I is possible to open a new Worksheet without creating a new *.sql file. Like in an MS Word. If I just need some space to write something and than destroy the file without saying. I can quickly click < ctrl + N > and get the space.
In SQL Developer to get a new "space"/work sheet i
-a- < ctrl + N >
-b- choose "SQL File"
-c- confirm default location
-d- choose the connection to be used (right top conner)
This process is way to long for getting a new sheet to put write an SQL.
Can you suggest a better way to get a workspace with current connection assigned in no time (like in MS Word)?
Please ;)
Yury

There is no need to create new .sql file.
I don't know why you need new SQL Worksheet when you can simply do the space by pressing Enter, but you can open a new one from Tools -> SQL Worksheet. There is also a toolbar button for this.

I had downloaded and used Final Cut Pro 7 (studio 3) on my mac, but it died. Can I download it to my new computer without buying a new copy? I'm not sure of the number of installations for academic copies. How would I do this?

I had downloaded and used Final Cut Pro 7 (studio 3) on my mac, but it died. Can I download it to my new computer without buying a new copy? I'm not sure of the number of installations for academic copies. How would I do this?

AH...good.
There is no limit on the times you can install it from the DVDs. There's just a limit as to being able to run it on multiple machines AT THE SAME TIME. If your old computer dies, or you sell it (please reformat the drive so they don't get FCP for free), then you can install on a new computer fine. And you are allowed to install on (1) desktop and (1) laptop at the same time as well...but only use it on one machine at any given time. Meaning you can use it on the desktop at work, and then when away from the office, on your laptop.
Long story short...you can install it fine without any issues.

HT2240 i already bought a quicktime pro version but lost the key some how. how can i get back that key, without buying a new one?

i already bought a quicktime pro version but lost the key some how. how can i get back that key, without buying a new one?

thank you Malcolm J. Rayfield for your replay. but this didn't help, because i bought the "pro" bevore that.

How to send the selected Filter values to a new template without JavaScript

Hello BW Experts,
can somebody tell me, how can i send two selected Values of two Dropdownlists to a new Template? and must i use JavaScript and hidden textelement?
btw, we are using BW 3.5.
Regards,
Jing
null

Hi jing,
for this.... you need to take one pushbutton(button group.)
and in that button group properties... you need to assign the properties...
Internal display---> click on button check box > give the caption... and come down-> select command check box-> select All commands-> select last option(Command for web templates)
> click on that and and there you need to select SET Transfer state.---> and double click on that and there you need to give ur next template name... which will displays the analysys item..
press ok.. and save it...
if you have still any doubts plz feel free to ask me.--- dont forgot to ASSIGN POINTS...
thanks
@jay

Hi everyone, I've got a question about Itunes. I've noticed that Itunes says to me how many time I've played a specific song since when I've put it on the library. I was wondering if there is a specific shuffle only for the new songs without creating a pl

Hi everyone, I've got a question. I've noticed that Itunes says me exactly the number of times that I've listened a song since I've put it on the library. Well, I've just put on some new music and I was wondering if there is a way to reproduce only the songs that Itunes nerver played without creating a new playlist.
Thank you
Simone

Welcome to the Apple Support Communities
This isn't possible, but this is a great idea > http://www.apple.com/feedback

How to make iTunes add a folder without creating duplicates?

Hello,
I have a PC running windows 7. I keep all my music in one folder on a NAS device. I am getting more and more fed up with Windows Media Player (WMP) and I would like to move to iTunes. This move, however, appears to be as painful as using WMP. Please help if you can. I have used iTunes before so I have an existing music and video library and I also have a number of playlists both with music and videos. I cannot afford to start from sratch, i.e., to remove and readd everything; it would be too costly. I have two major problems with iTunes:
1. When I try to add files that already exist in the iTunes library iTunes happily adds these file and creates duplicates. I cannot find a knob that would prevent iTunes from creating these duplicates and simply ignore any found files if they are already present in the library. All such duplicates point to the same file on disk. I am really scratching my head over this as I would think that this would be a very basic thing to do/allow, yet it does not seem to be possible. Is it me missing something simple here or is it Apple telling me that this is how it must be...???
All I want to do is to add the top folder that contains all my music without having to deal with thousands of duplicates. I cannot add the files one-by-one because there are too many of new files there and if I remove all the files and re-add them all my lists will likely become empty (tried it on one list and, as expected, the list got emptied once I removed the files that were in the list). Hmm, is this asking for too much? Please help.
2. I do not seem to see a way to tell iTunes to monitor for new media files. WMP allows you to specify folders to monitor. You add a file to the folder and the file gets added to the library. What is wrong or bad with this concept (other that it would not work if duplicates were handled)? Why does iTunes not seem to support that?
Thank you,
Peter

tt2, thank you for your reply. Let me restate your answers the way I see them.
Problem #1: You said that "iTunes only creates duplicates if you ask it to...". Well my goal is not to create duplicates but to avoid them and the problem with iTunes is that it does not seem to offer an easy way to do this. Do not get me wrong, I like iTunes but let's call black black and white white. So the way I read your answer is: no iTunes does not support a way to add the same folder twice without creating duplicates.
Problem #2: The answer to the second question is also no, iTunes does not offer any way to monitor for new files in a folder or folders.
I wish the above were incorrect but from what I hear and from what your wrote I conclude iTunes does not support any of that.
You offered external to iTunes solutions for both problems. Thank you for that! I did not know about this tools. Having said that my iTunes music files are on a NAS device (files not copied to iTunes library), my video files are on NAS but (because of the necessity to convert to iTunes supported format) they were transcoded and stored in iTunes library, my iTunes Store purchases (music) are in the iTunes library and on the NAS (backup - likely duplicates). In short it gets messy very quickly and after reading the NAS and multi-path warnings for the DeDuper tool I am just not jumping on the idea of using it - there would be physical duplicates and I would not want any physical files to be deleted. tt2, do you know if the DeDuper offers a mode where it would present the user with a list of duplicates and allow the user to decide which dups to remove before doing anything? I basically would want to remove the dups from the library but without deleting any physical files.
I will have a closer look at the iTunes Folder Watch program. Unless I am misinterpreting something I think it should do what I want to do.
So again, thank you for your answers and suggestions with the external tools. It is just too bad that iTunes does not support what I (and many others) need natively.
Peter

How implement Corporation Goals in Appraisal Template without SEM

The component SEM is not used in our system. How I may to customize the template in appraissal catalog to create a Corporation Goals list which will be used in objectives settings of employee?

Hi,
Please do let me know if you come up with a solution. I had the same issue at a client, but I used HTML tags in the description tab. That works well with the web layout, but cannot use it with the standard print layout. It also means that you would need to create a new template every year to incorporate the change in objectives. This has effects on the ECM config if integrated.
Regards,
Priya.

How to Delete IDoc by Sara Transaction without create a file

Hi guru´s
I have a problem.
I am using SARA transaction for Archiving IDoc, but I need to execute and eliminate recods without create a file. In R3 version we have this option in RSEXARCA, but in ECC 6.0 not.
How to execute it?
Some one have the same problem?
Do you have any documentation about Archiving in Ecc 60.0?
Thanks in Advance.
B. Regards
Cristina

Hi guru´s
I have a problem.
I am using SARA transaction for Archiving IDoc, but I need to execute and eliminate recods without create a file. In R3 version we have this option in RSEXARCA, but in ECC 6.0 not.
How to execute it?
Some one have the same problem?
Do you have any documentation about Archiving in Ecc 60.0?
Thanks in Advance.
B. Regards
Cristina

Is it possible to Save current song as new template without any audio files

I'm trying to find a way to save an open song as a new song template sans the audio files of the current song. I tried deleting them from the arrange window before saving as template, but that still leaves them in the audio window attaching them to the new song template. Anybody know how to do this ?
G5 Dual 2.7 4.5 gb Mac OS X (10.4.9) Logic 7.1.1 motu 828mkII

I'm trying to find a way to save an open song as a
new song template sans the audio files of the current
song. I tried deleting them from the arrange window
before saving as template, but that still leaves them
in the audio window attaching them to the new song
template. Anybody know how to do this ?
G5 Dual 2.7 4.5 gb Mac OS X
(10.4.9) Logic 7.1.1 motu 828mkII
You answered your own question. Delete them from the audio window. Don't worry, they will not be deleted from your hard drive unless they were just recorded and if so Logic will ask you if you want to "keep" them (on the drive) or delete them.

How do I delete unused pages templates i created

I have a MacBook OS 10.8.4
I have saved templates I have created to "Save as a Template" in "My Templates", many of which are no longer relevant. How do I delete them?
I read the Pages UG, and see something about creating my own folder to save mine in, but I don't find a way to delete them from Pages "My Templates"

Hi Jerry,
That thought went through my mind, too, after your help. But ten steps? I think they would be embarrassed to put it in the UG. : D
Any way, I am so grateful for people out there like you who can help a non-techy like me. I've been using Mac since 1999, love it, but now it's getting a bit too complicated for me. That's inevitable with more sophisticated products, of course, which are totally amazing, to say nothing of the app world.
Do you remember the MS loaned exec for developing the iPhone, at the launch press conference, he said he had learned two important values at Apple: Simplicity and ease of customer use. Ah, those were the days! : )
Thanks again, buddy!
David

Transfer user files to new computer without creating new user?

I know this is probably listed on here, but I have searched for two days and have not found it. I am very confused and frusterated. I set up my new iMac on wednesday running Lion. When I originally tried migration in setup assistant, the only way to migrate computer to computer was over the wifi. After that failed/froze three times (I am thinking because my home internet is too slow?) I just skipped that set in setup so I could use my computer. After reading some posts, I saw that I could migrate by essentailly making my old computer (macbook pro) an external hard drive and holding down the "T" key when I restarted. When it said I cannot transfer that user with the same name to the new computer, I changed the name. That worked must faster and transfered all my stuff over. I went to set up my itunes and iphoto and noticed that I couldn't find those migrated files. I read another post saying that i now have another user and have to log out and log into that user to get the files. I don't want two users, I want one that has all my stuff! Now maybe I did something wrong or don't totally understand the process, but is there a way for that to be done?? I have read I can delete the "admin" account that my computer created somehow and just use the old computers migrated user as my main account or just leave them both. Which is the better option here? Appreciate any help anyone can give. Thank you for your time.

You did nothing wrong, but you did misunderstand the process. Here are your options:
Log out of the account you created in Setup Assistant and log into the account you migrated from your old computer. Open Accounts preferences, click on the lock icon and enter the admin password for the migrated account. Select the account created in Setup Assistant and click on the Delete [-] button to remove it. Select the third removal option. You now have one user account - the renamed account you migrated from your old computer.
Create a third temporary account. Name it "temp" and use "temp" as the password (no quotes.) Give this new account admin status. Log out of the current account and log into temp. Now delete both of the other accounts. Then connect the other computer via Firewire cable as you did before. Boot the old computer into Target Disk Mode. Now re-migrate your old account using Migration Assistant. After the migration has completed log out of temp and log into your old account. Delete the temp account. This will give you one account with the same username you were using originally.

How to create releases against BPA without creating ASL

Hi,
I have a requirement to create PO against BPA whenever requisition is created(from drop ship SO). As we have thousands of items we cannot create ASL.
Could you please let me know the steps to do this automatically.
Thanks in advance.

user12288821 wrote:
Hi,
I have a requirement to create PO against BPA whenever requisition is created(from drop ship SO). As we have thousands of items we cannot create ASL.
Could you please let me know the steps to do this automatically.
Thanks in advance.First as far as i know..you can't create a PO against a BPA..if you want to create a PO it should be against GBPA
without ASL i doubt..it can be possible..
Mahendra

How do I create a new template without creating a new document?

Similar Messages

Maybe you are looking for