How do I create a registered members section to an exhisting website

I have an existing website.  I would like to create a section for employees to be able to register then have access to areas within that section of the site. 
I am great with basic design, I have experience with adding forums and blogs to websites using php and mySql, but this is different from anything I have done before.
Any and all help, suggestions, etc is greatly needed and appreciated!
Thanks!

I will have to throw in my own two cents here. With just a little research, and enabling the deprecated extensions that enable server behaviors, it takes about 20 minutes to set up private pages, user authentication, and a database for users.
This is basic basic basic PHP programming and there are a zillion tutorials to show you exactly how to do it. CS6, which ACC user may download and install, even has a wizard. All you have to do is install a local server like MAMP or Wamp for Mac or Windows, spend a few moments learning PHP my admin to set up the user database, and you are off and running.

Similar Messages

  • How do I create (or delete) a new tag for a website, so that its tag appears (or does not appear) every time I restart Firefox?

    How do I create (or delete) a new tag for a website, so that its tag appears (or does not appear) every time I restart Firefox?

    See this - https://support.mozilla.org/en-US/kb/How%20to%20set%20the%20home%20page

  • How do I Create interactive images to be used in another website?

    Our office is contracted with a simple website company, so from the begining the framework is there. I want to add an interactive map that has each county hyperlinked to information about that area. I was told that Dreamweaver is the program I would need in order to create it.
    So, I have the program now but every tutorial I read is about making your own website in dreamweaver and I can't find anything about how to create the image to upload into a different website.
    Anyone know how to do this????
    Thank you!

    This helps, thanks. I have the content on the web page (where the hyperlinks will attach to), I have the image of the map, and I am making the shapes for the hotspots, just not how to get it all to link up.
    Also, when I saved a trial (just to make sure it would all work) it doesn't successfully upload as an image onto the website, just a little box with a red X. Any more thoughts anyone? 

  • How can I create an active table of content in the sidebar to help readers to get to the section?

    How can I create an active table of content in the sidebar to help readers to get to the section?

    You can create bookmarks with Adobe Acrobat.

  • How can I create a new page in pages, without creating a new section?

    how can I create a new page in pages, without creating a new section?

    Good morning graywright,
    It sounds as if what you are wanting to do in the Pages application is to insert a Page Break. Follow the steps in this article -
    Pages '09: Inserting a Page Break
    In a word processing document, click where you want the break to occur, and then choose Insert > Page Break. 
    To remove a page break, click at the beginning of the line that follows the break and press the Delete key.
    In a page layout document, to insert a new page in your document, click Pages in the toolbar and choose from the template page options available.
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • How can I create a high res image gallery, need to have print res photos for a pressroom section.

    How can I create a high res image gallery, need to have print res photos for a pressroom section.

    If you want Muse to "pass through" your images and not adjust, compress, crop etc - you need to place your images in the lightbox EXACTLY at the right size, pre-cropped and prepped in Photoshop.
    So if your light box is 800x600 the image you're dropping into that must be 800x600 exactly with no effects, rotation etc added to the lightbox frame. This stop Muse fiddling with your images, if they are perfect when inserted and you're not asking Muse to crop, expand, add effects etc. If it's perfect when inserted, Muse SHOULD also leave the resolution alone too, but I have not tried that one, but in theory, it should work.

  • When i bought this iMac i failed to register correctly and as i am trying to install a printer i need to do this when i am logging on. How can i create new password

    When i bought this iMac i failed to register correctly and as i am trying to install a printer i need to do this when i am logging on. How can i create new password

    See
    http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/ and
    http://osxdaily.com/2011/09/19/change-password-mac-os-x-10-7-lion-without-knowin g-current-password/
    which also apply to Mtn Lion and Macericks.

  • How to creat purchase register in SAP r/3 system?

    Dear All,
    Please tell me how to creat purchase register in sap R/3 system.

    HI
    I think there is no standard functionality in sap u need to develop with abaper help with proper logic
    if it is for venijula s_alr_87009936  try this t.code
    Thanks & Regards
    Phaneendra
    Edited by: phaneendra Reddy on Jun 12, 2009 9:24 AM

  • How to identify objects created by registering xml schema

    Hi Everyone,
    We are using Oracle 9i Rel2. I have registered an XML schema and I saw that there were several objects created for it table ,some types and a trigger . For some build purposes I want to exclude all of these objects which are associated with xml schema and should be able to drop and recreate the whole of oracle schema.
    I see the user_types table does not have any parameter to indicate that these are autogenerated or are different. In user_types they look like any other type that a user would have created. Do any of you know how to differentiate these types created by registering XML schemas from the normal types.
    Thanks for your help

    There is no way I know of to differentiate between a type created by Schema Registration and another Type. You can query the XML Schema itslef to get the Typenames it relies on.
    SQL> --
    SQL> SQL> select nvl(extractvalue
    2 (
    3 value(ct),
    4 '/xs:complexType/@name',
    5 'xmlns:xs="http://www.w3.org/2001/XMLSchema"
    6 xmlns:xdb="http://xmlns.oracle.com/xdb"'
    7 ),'Local Complex Type') COMPLEX_TYPE,
    8 extractvalue
    9 (
    10 value(ct),
    11 '/xs:complexType/@xdb:SQLType',
    12 'xmlns:xs="http://www.w3.org/2001/XMLSchema"
    13 xmlns:xdb="http://xmlns.oracle.com/xdb"'
    14 ) SQL_TYPE
    15 from user_xml_schemas,
    16 table
    17 (
    18 xmlsequence
    19 (
    20 extract
    21 (
    22 schema,
    23 '//xs:complexType',
    24 'xmlns:xs="http://www.w3.org/2001/XMLSchema"
    25 xmlns:xdb="http://xmlns.oracle.com/xdb"'
    26 )
    27 )
    28 ) ct
    29 /
    COMPLEX_TYPE
    SQL_TYPE
    PurchaseOrderType
    PURCHASEORDER_T
    LineItemsType
    LINEITEMS_T
    LineItemType
    LINEITEM_T
    COMPLEX_TYPE
    SQL_TYPE
    PartType
    PART_T
    ActionsType
    ACTIONS_T
    Local Complex Type
    ACTION_T
    COMPLEX_TYPE
    SQL_TYPE
    RejectionType
    REJECTION_T
    ShippingInstructionsType
    SHIPPING_INSTRUCTIONS_T
    Local Complex Type
    ROOT_T
    COMPLEX_TYPE
    SQL_TYPE
    Local Complex Type
    P222_T
    10 rows selected.
    SQL>

  • HT204053 how can i create multiple icloud accounts for my family members

    how can i create multiple icloud accounts for my family members

    Thanks...  I appreciate the reply.  Since I wrote the previous email, I actually went and changed my apple id (the main id) and the documentation I looked at said iCloud will set mail up automatically(?)...  I had it working before. 
    Also, I tried to manually set up the ID via the Mail Accounts screen(s) and I can't figure out what my server information is...  Pop or Imap?  What's the outgoing server and the incoming server?
    I typically have never had problems setting up mail accounts (in apple mail) with no problem.
    Can anyone point me in the right direction?
    Thanks in advance!

  • How do I create a hyperlink to a specific section of a flash website?

    Ok, I have no experience coding in flash, I just want to
    create links to specific parts of a flash website (website that
    were created by other people, not that I am building). In other
    words, I just want to create the hyperlink that will open a certain
    section of the website - I'm not developing the site and I don't
    want to create links inside the site. Is there any way to do this?
    For example:
    http://www.lucasarts.com/games/fracture/
    is the flash site I want to link to. Wherever I navigate in
    the site, the address never changes in my browser. But I know it is
    possible to get a URL to a specific flash page, because I have seen
    some of the web admins post them.
    For example:
    http://www.lucasarts.com/games/fracture/?section=2&sub=5
    which opens a very specific section of the site. So is there
    anyway for me, an average computer user with no experience in flash
    coding, to get a hyperlink to open a certain section of a flash
    site, or at the least get my browser to display the specific URL
    (that is, the "?section=2&sub=5" part of the address). I use
    firefox, but am willing to try anything or any browser at this
    point.
    Thanks!

    My Flash sites use a section and subSection structure, and
    within the site I use the numbers to display specific areas. But
    it's done internally. I have no code that looks at a query string
    attached to the URL so supplying the numbers to my sites will have
    no effect. The example you give clearly does read parameters passed
    in a query string so if you know the correct numbers (and the param
    names eg 'section') then you can do it.

  • How do I create a Favorites section in my Library for importing from my Desktop?

    How do I create Favorites in my Library so I have a shortcut for importing from my Desktop?

    Select the drive from the Device sidebar in the left pane of the import window. Use the drop down by clicking on the drive icon that appears in the main import window. Drag the Desktop to Favorites.
    Russ

  • How to identify MBeans created and registered from a Remote RMI Connection

    Hi. I'm writting an application that has a central MBeanServer. Each time a remote agent is started, it creates a JMXConnection (RMI) to the Server. During its lifetime the remote agent creates mbeans, invoke methods, etc.
    On the JMXConnectorServer server the JMXConnectionNotifications are listened.
    What I want is:
    When the remote agent dies, to unregister automatically the MBeans created through the remote connection.
    I'm received the Connection Closed Notification, So I can retrieve de connectionID of the closed connection, but I cannot correlate the connectionID with the mbeans created and registered through that connection.
    Any Ideas?
    Thanks

    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!
    Try a Coke-a-Cola ther good!

  • How do I create a 1d array that takes a single calculation and insert the result into the first row and then the next calculation the next time the loop passes that point and puts the results in thsecond row and so on until the loop is exited.

    The attached file is work inprogress, with some dummy data sp that I can test it out without having to connect to equipment.
    The second tab is the one that I am having the problem with. the output array from the replace element appears to be starting at the index position of 1 rather than 0 but that is ok it is still show that the new data is placed in incrementing element locations. However the main array that I am trying to build that is suppose to take each new calculation and place it in the next index(row) does not ap
    pear to be working or at least I am not getting any indication on the inidcator.
    Basically what I am attempting to do is is gather some pulses from adevice for a minute, place the results for a calculation, so that it displays then do the same again the next minute, but put these result in the next row and so on until the specifiied time has expired and the loop exits. I need to have all results displayed and keep building the array(display until, the end of the test)Eventually I will have to include a min max section that displays the min and max values calculated, but that should be easy with the min max function.Actually I thought this should have been easy but, I gues I can not see the forest through the trees. Can any one help to slear this up for me.
    Attachments:
    regulation_tester_7_loops.vi ‏244 KB

    I didn't really have time to dig in and understand your program in depth,
    but I have a few tips for you that might things a bit easier:
    - You use local variables excessively which really complicates things. Try
    not to use them and it will make your life easier.
    - If you flowchart the design (very similar to a dataflow diagram, keep in
    mind!) you want to gather data, calculate a value from that data, store the
    calculation in an array, and loop while the time is in a certain range. So
    theres really not much need for a sequence as long as you get rid of the
    local variables (sequences also complicate things)
    - You loop again if timepassed+1 is still less than some constant. Rather
    than messing with locals it seems so much easier to use a shiftregister (if
    absolutely necessary) or in this case base it upon the number of iterations
    of the loop. In this case it looks like "time passed" is the same thing as
    the number of loop iterations, but I didn't check closely. There's an i
    terminal in your whileloop to read for the number of iterations.
    - After having simplified your design by eliminating unnecessary sequence
    and local variables, you should be able to draw out the labview diagram.
    Don't try to use the "insert into array" vis since theres no need. Each
    iteration of your loop calculates a number which goes into the next position
    of the array right? Pass your result outside the loop, and enable indexing
    on the terminal so Labview automatically generates the array for you. If
    your calculation is a function of previous data, then use a shift register
    to keep previous values around.
    I wish you luck. Post again if you have any questions. Without a more
    detailed understanding of your task at hand it's kind of hard to post actual
    code suggestions for you.
    -joey
    "nelsons" wrote in message
    news:[email protected]...
    > how do I create a 1d array that takes a single calculation and insert
    > the result into the first row and then the next calculation the next
    > time the loop passes that point and puts the results in thsecond row
    > and so on until the loop is exited.
    >
    > The attached file is work inprogress, with some dummy data sp that I
    > can test it out without having to connect to equipment.
    > The second tab is the one that I am having the problem with. the
    > output array from the replace element appears to be starting at the
    > index position of 1 rather than 0 but that is ok it is still show that
    > the new data is placed in incrementing element locations. However the
    > main array that I am trying to build that is suppose to take each new
    > calculation and place it in the next index(row) does not appear to be
    > working or at least I am not getting any indication on the inidcator.
    >
    > Basically what I am attempting to do is is gather some pulses from
    > adevice for a minute, place the results for a calculation, so that it
    > displays then do the same again the next minute, but put these result
    > in the next row and so on until the specifiied time has expired and
    > the loop exits. I need to have all results displayed and keep building
    > the array(display until, the end of the test)Eventually I will have to
    > include a min max section that displays the min and max values
    > calculated, but that should be easy with the min max function.Actually
    > I thought this should have been easy but, I gues I can not see the
    > forest through the trees. Can any one help to slear this up for me.

  • How Can I create a database?

    How can I create a database to store registered members info
    (member id, password and other information?) I have the scripts for
    member login, member signup, etc.. I understand that I will have to
    deploy the database, once it is created, in the same folder where I
    have all other scripts (PHP.)
    Thank you, in advance.

    Hey,
    basically you should start with an empty SharePoint 2010 project where you add an List-EventReceiver. This Receiver should point to the url of the list and handle the ItemAdded-Event. In this method you place the code to create the database, for example
    with a SQL-Statement.

Maybe you are looking for

  • Iframe content in YUI tab disappearing - only in firefox 11

    We have an internal web site developed with YUI which uses the tabview control along with some content provided through an iframe. When the page initially loads the iframe is displayed but when switching between the YUI tabs the iframe content disapp

  • "member of " not working with nested table of dates

    Can someone explain why this doesn't work. The last select does not return any row. When trying the same with a table of number, it works fine. drop table test; drop type date_tab; create type date_tab as table of date; create table test(dates date_t

  • Mpd update error

    just updated mpd and i keep getting a connection refused message when trying to start ncmpcpp. anyone else see this?

  • External webcam not working with ichat

    I just got a Macally webcam to get on ichat. Ichat recognizes the webcam in preferences, but when I try to get a screen view, it's just an infinite pic of my desktop. No camera. What should I do to fix this?

  • User cannot see its own profile

    I just configured Identity Manager and Access Manager. But logging in to User Manager as a normal user, and clicking on "My Profile" subtab result a message "You do not have sufficient access rights". What is missing here. Thanks for any response.