How Do I create a Ringtone Using an mp3??

Hi
As the topic suggest. How do I create a ringtone using a mp3 instead of buying ringtones from iTunes?
Thanks
Baz

madgroundhog wrote:
I've tried this method, but it's still not working for me, for some reason. I've got the 3GS. I followed the instructions, and the created ringtone is showing up in iTunes in the Ringtone section. When I connect my iPhone to my Mac, & it appears as a device in iTunes, my ringtone appears there... it just doesn't appear under the ringtone options on the iPhone itself... what am I doing wrong here? Am I looking for it in the wrong place?
Make sure to sync your ring tones.

Similar Messages

  • How can I create a ringtone using a song from my itunes library?

    I have installed a number of ringtone apps for my iphone to create a special ringtone. I have followed all the steps adding the tune to my itune library, but am unable to complete the final step of moving the tune from the library to 'tone' and then syncing the tune to my iphone as a ringtone. Any suggestions would be appreciated.

    In iTunes pref>General - is the Tones option enabled?
    When you plug in the Device - from the DEvies window go to the Tones tab at the top and select the Tones that you want to laod on the iPhone.
    MJ

  • I've never used garage band. How do I create a ringtone for my new Iphone4s?

    I've never used garage band. How do I create a ringtone for my new Iphone4s?

    Onefineday wrote:
    How do I create a ringtone for my new Iphone4s?
    this explains how:
    http://www.bulletsandbones.com/GB/GBFAQ.html#makeringtone
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • HOw do I create a ringtone for iphone5 using the new itunes

    How can I create a ringtone for my iphone 5 using the newest version of itunes. Thanks

    This article takes you through the process
    http://www.simonblog.com/2012/12/01/itunes-11-how-to-create-free-ringtone-and-te xt-tone/

  • How to create a ringtone using GarageBand?

    Hi,
    Is there any simple tutorials anywhere explaining how to create a ringtone using an iTunes track or mp3 music file in GarageBand?
    I'm in the UK and cannot purchase ringtones from iTunes as yet.
    Thanks in advance! David.

    Here are some very simple instructions to create a ringtone in Garage Band. Drag your song(s) in from iTunes or from your CD which has been copied into iTunes. If it is an AAC protected file, Garage Band will disallow making a ringtone and it will tell you so.
    • Cut the song to 30-40 seconds of the section you want.
    • From the drop down menu, choose 'share' (not share with iPhone)
    • Export to disk/desktop. Compress using AAC
    •Change the file name from m4a to m4r
    •Drag into iTunes
    Have fun!

  • How do I create a submenu using Muse

    How do I create a submenu using muse

    Hi,
    Kindly refer to the following links:
    Vertical Sub Menu
    Adobe Muse - Submenu - Sub Menu - Drop Down Menu - Navigation - YouTube
    Adobe Muse Getting Started - Adding A Navigation Bar - YouTube
    Regards
    Sonam

  • How do I create a ringtone from my music already on my iTunes database

    How do I create a ringtone from my music already on my iTunes database

    take a look at the link gives you detailed instructions to create ringtone and sync to yoru phone
    http://www.ehow.com/how_2160460_custom-iphone-ringtones-free.html

  • How can i create splash screen using netbean?

    how can i create splash screen using netbean?

    Welcome to the Sun forums.
    gabbyndu wrote:
    how can i create splash screen..Java 6 offers a splashscreen functionality. See [New Splash-Screen Functionality in Java SE 6|http://java.sun.com/developer/technicalArticles/J2SE/Desktop/javase6/splashscreen/] *(<- link)* for details.
    [Java Web Start|http://java.sun.com/javase/technologies/desktop/javawebstart/index.jsp] has offered splash screens to applications since Java 1.2. See [How can I provide my own splash screen?|http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/faq.html#206] in the JWS FAQ for more details.
    .. using netbean?We don't support Netbeans here. Ask that on a [Netbeans forum|http://forums.netbeans.org/].

  • How can i create slaes order using BAPI

    hi all,
    i didnt work on BAPIS .how can i create sales order using BAPI here i should pass Z values.
    Moderator message : FAQ, search for available information. Thread locked.
    Edited by: Vinod Kumar on Sep 13, 2011 12:22 PM

    Hi!
    There are a lot of answered threads regarding your question. Try searching first. Below is a sample link.
    BAPI_SALESORDER_CREATEFROMDAT2
    Regards,
    Steph
    Edited by: stephquion on Sep 13, 2011 8:25 AM

  • How do we create a vendor using portal?

    how do we create a vendor using portal.
    creation process needs to trigger workflow.
    Sonali

    You need to use WLST online. I am not sure what your exact requirements are but one good way of working this is to have a WLST script that deletes all your WL customisations, like connection pools, JMS Servers etc and then creates it. That way you can run the same script repeatedly and it will get everything up to date for you. However you have to remember that everytime you add something new you need to update your delete section. Also your deleting should not fail if the item does not exist. I hope that makes sense!
    As to the specifics of WLST examples to do this then check out the WLST examples in CodeShare.
    If you are still having issues then post another message.
    Geoff

  • How can I create DVD Label using Photoshop Elements 10?

    How can I create DVD label using Photoshop Elements 10?
    Richard

    You can create the design for a DVD label in Create>More Options. Once you have the label set up, you would copy it to a template for the labels you plan to use. (The PSE template makes one label, while most printed labels are two-up.)

  • How do I create a ringtone in iTunes 10.2.2?

    I have found an article that shows how to create a ringtone in iTunes 9.2 and it does not seem to apply to iTunes 10.2.2
    Can I safely download 9.2, create a ringtone in the iTunes Store and not affect my current application?
    Thanks for the help,
    eAL

    I am completely unable to use a purchased "ringtone" as a ringtone because iTunes will not recognize it as such. I have tried the instructions in the above article (numerous times), and found the same instructions all around google.  I can NOT move a 30 sec clip I purchased today on iTunes from the music library to the ringtones on my iMac.  It is my understanding from hours of researching this problem, that music sold on iTunes from a computer can NOT be used as ringtones because they are not truly ringtones??  Instead, I have to purchase music from the iPhone under the iTunes App > More > Ringtones.  Is this correct??  I'm so beyond frustrated.  Mac is NEVER this difficult.  Why on earth would anyone want to purchase a 30 sec. clip of a song and NOT be able to use it as a ringtone?  If this is truly the case then there should be a disclaimer in iTunes stating that fact. 
    I also discovered while following instructions from another post, that the song I just downloaded today is not under the "purchased" section of my iTunes account, yet it is in my music library.  Huh??  How can that be?  Is it because I've changed the format from m4a to m4r and it's now different than what I purchased? 
    I'm so confused and think I may have to resign myself to re-purchasing a lesser liked ringtone from the same song directly from my iPhone.  

  • How do I create a ringtone for my iPhone 5 from garage band?

    How do I create ringtones from my music in iTunes for my iPhone 5 using Garage Band? Thanks

    http://support.apple.com/kb/ht1358

  • [Forum FAQ] How do I create calculated measure using AMO in SQL Server Analysis Services?

    Introduction
    In SQL Server Analysis Services (SSAS), you can create a calculated measure in SQL Server Data Tool (SSDT)/Boniness Integrated Development Studio (BIDS). Sometimes you may need to create calculated measure by using AMO in a C# or VB project.
    In this article, I will demonstrate so how to create calculated measure using AMO in SSAS?
    Prerequisites
    Before create calculated measure using AMO, you need to ensure that the following components were installed in your server.
    The multidimensional database AdventureWorks Multidimensional Model 2012
    A SQL Server with SSIS and SSAS installed
    The AMO libraries installed:
    X86 Package (SQL_AS_AMO.msi)
    X64 Package (SQL_AS_AMO.msi)
    Solution
    Here is the detail steps to create calculated measure using AMO in SSAS.
    Open SSDT and create a new SSIS project.
    Drag Script Task to the design surface.
    Click SSIS-> Variables to open the Variables window and add two variables that used to connect to the server and database.
    Create a connection to connect to SSAS server.
    Rename the connection name to ssas.
    Double click the Script Task to open Script Task Editor.
    Add Connection and Database variables to ReadWriteVariables textbox and then click Edit Script button.
    Add AMO reference in the Solution Explore window.
    Copy the script below and paste it into the script.
    Dim objServer As Server
    Dim objDatabase As Database
    Dim strDataBaseID As String
    Dim objCube As Cube
    Dim objMdxScript As MdxScript
    Dim objCommand As Command
    Dim strCommand As String
    objServer = New Server
    objServer.Connect("localhost")
    objDatabase = objServer.Databases("AdventureWorksDW2012Multidimensional-EE2")
    strDataBaseID = objDatabase.ID
    If objDatabase.Cubes.Count > 0 Then
    objCube = objDatabase.Cubes("Adventure Works")
    If objCube.MdxScripts.Count > 0 Then
    objMdxScript = objCube.MdxScripts("MdxScript")
    objMdxScript = objCube.MdxScripts(0)
    Else
    objCube.MdxScripts.Add("MdxScript", "MdxScript")
    objMdxScript = objCube.MdxScripts("MdxScript")
    End If
    objCommand = New Command
    strCommand = "CREATE MEMBER CURRENTCUBE.[Measures].[Multipy Measures By 3]"
    strCommand = strCommand & " AS [Measures].[Internet Sales Amount] * 3, "
    strCommand = strCommand & " VISIBLE = 1 ; "
    objCommand.Text = strCommand
    objMdxScript.Commands.Add(objCommand)
    objMdxScript.Update()
    objCube.Update()
    End If
    objServer.Disconnect()
    Then you can run this SSIS package to create the calculated measure.
    Applies to
    Microsoft SQL Server 2005
    Microsoft SQL Server 2008
    Microsoft SQL Server 2008 R2
    Microsoft SQL Server 2012
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Thanks,
    Is this a supported scenario, or does it use unsupported features?
    For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
    in a supported way?
    Thanks! Josh

  • How can I create an iBook using iBooks Author using images from a PDF?

    I have a complex book with custom fonts and lots of images, and the client wants it on the iPad. So my most reasonable option seems to be to take images from a PDF and use them for the pages. However, images in iBook Author don't get "laid out" as expected in Portrait mode. How can I  create a layout that is essentially one image per page in portrait mode, and then convert that to landscape mode? Or is there an easier way to go about this?

    tk0us wrote:
    Make sure you have disabled portrait in the Inspector.
    I don't understand why portrait mode defaults images and other "widgets" to thumbnails. The original format of the book (and of 99% of all books I'm guessing) is in portrait format. By forcing the book to work only in landscape mode it's forcing the page image to be half the size, and that makes using this book particularly difficult. Is there no way to force the pages to be full-size in portrait mode?

Maybe you are looking for

  • How do you move Itunes from a PC to a Mac

    Hey, I just bought a new Mac for college, however I need to move my itunes library from my PC to my Mac. I was wondering what would be the best method to do it. Thanks.

  • Can connect via Ethernet but not on Airport

    I am able to connect fine with Ethernet. Initially when I brought up Safari it launched the modem and I had to enter my ISP username and password. Then I was able to connect fine with Ethernet. My problem is that I cannot connect with Airport. I disc

  • How to revert p4 port and telnet port from 50204 to default?

    Hi, i changed the p4 port and telenet port to 50204 using Visual Administrator. Now Visual Administrator and the J2EE server are both down. Is there some way I could revert back my ports to the default ports? Also, my J2EE dispatcher process is down

  • Click wheel navigation difficulty - any tips?

    I've been gifted a 160gB iPod Classic & I'm finding the click wheel for navigation in menus (and to playlists etc.) very difficult. The documentation says to scroll lightly but that doesn't do anything. I've been using other non-Apple touchscreen dev

  • Lumia 1020 photo sharing problems

    When I share a photo to another phone, the recipient can't open it.  If someone sends me a photo, my phone won't open it.  What's the problem and how do I fix it?