How do I create in Illustrator the same effect of 'color burn' in Photoshop?

How do I create in Illustrator the same effect of 'color burn' in Photoshop? I am trying to create a rainbow effect by bleding the colors but need this in Illustrator.

Thanks! I found it! Thats what I needed!
Serena Finn
303.919.5239
[email protected]
finndesignshop.com

Similar Messages

How do I create a column the same size?

How do I create a column the same size?
I'm concatenating up to 6 cols into one col. If one of the column has a space it will shrink it (I used varchar2 and char) .
e.g: col1= '123456', col2= ' ', col3= ' ',col4= ' 123', col5=' 51',....etc
I want to see them as :colx= '123456', ' ', ' ',' 123',' 51'
Thanks for your help.

You are alomost right,:-)
since OP said :If one of the column has a space it will shrink it (I used varchar2 and char) .
So you should use replace function not trim function.
test > select replace(' a b c ',' ') from dual
2 /
REP
abc
test > select trim(' a b c ') from dual;
TRIM(
a b c

How can I create arrays through the same recursive process?

Hello again!
I want to create some arrays with names like array1, array2, array3 etc
through the same for loop.
Do you know how this can be done? Thanks!
for (int i = 0; i < 32; i++) {
byte[] array???=new byte[400];
}

I want to create some arrays with names like array1,
array2, array3 etc
through the same for loop.
Do you know how this can be done? Thanks!
for (int i = 0; i < 32; i++) {
byte[] array???=new byte[400]; You cannot create new names during runtime (array1, array2 are names).
You can create a map that associates Strings with byte arrays though:Map<String, byte[]> map= new HashMap<String, byte[]>();
for (int i= 0; i < 32; i++)
map.put("array"+i, new byte[400]);
// get array associated with array26:
int j= 26;
byte[] oneOfTheArrays= map.get("array"+j);kind regards,
Jos

I have a MacBook and created a slideshow on IPhoto. I made copies (discs) of the slideshow and they did not come out well...how can I create discs with the same quality as the original?

I created an IPhoto slideshow.... the quality was wonderful on my MacBook and through my projector. I was told to export to my desktop and create copies via IDVD. I did that and the copies are terrible quality. 1. How to I make a copy to look exactly like the original and 2. I do I save as a backup should my Mac crash? Please.... this took a long time to create and I really need help. Thanks!

Why is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673

How to create links to the same page, how to create links to the same page

How to create link to the same page with iweb?
Thanks

You're referring to anchors. There are a couple of ways. These topics discuss them:
iWeb FAQ - Anchors
How do i hyperlink to certain portion...: Apple Support Communities
OT

How am i able to use the same itunes account on a different ipod?

How am I able to use the same iTunes account on a different iPod?

By just using the same iTunes account. If you set up the iPod on your computer just make sure that iTunes is signed your account. Of settingup via wifi, just enter your existing account. Do not create a new one.

I have an itunes account in Euro. I received iTunes and AppStore Gift Cards in $US. How can I use these on the same iWhatever?

I have an itunes account in Euro. I received iTunes and AppStore Gift Cards in $US. How can I use these on the same iWhatever and keep together music/apps bought in the 2 currencies?
Thx

Barbara Hunt wrote:
Would it be possible for me to download iTunes in Parallels and get the files into that and then onto my iPod?
Yes, you can download iTunes for Windows using Parallels. If planning on making purchases here and/or authorizing already purchased tracks (from your Mac iTunes library), you are permitted to authorize five (5) computers as per iTunes Store terms of use, regardless of computing platform. No need to create a separate new iTunes Store account.
However, judging from what you would like to do, your best bet would be to convert the WMAs to AAC/MP3 in iTunes-Windows (iTunes-Mac cannot import WMA files), and drag the files from the Parallels window to your desktop to add to the iTunes-Mac library. (as the iPod itself is currently linked to your iTunes-Mac library)
Hope this helps,
Steve

How to Add 3 queries in the same work book?

Hi Gurus,
Can any one tell How to Add 3 queries in the same work book?
Example, daily report,Monhly and yearly reports for sales should be in the same workbook.
Please help me if any one have a pointer or a how to doc if available.
<<Text removed>>
Thanks
James
Edited by: Matt on Apr 26, 2010 9:36 AM

Hi James,
According to BI 7.0 Version
Steps of creating workbook and to insert more than one query in a workbook.
When you run a query and it opens in Bex Analyzer you can click the save button and pick "Save as Workbook".
Once you save it as a workbook Click on the "Design Mode" button in the Bex toolbar (looks like an A).
Click in the sheet where you want the new query to go, click the "Analysis Grid" button. It will add the analysis grid to your new sheet.
Right click on the Analysis grid and go to properties.
Click on button to change data provider and select the query you want to attach.
Exit design mode and you should be all set.

How to remove links pointing to the same page?

I have PDF documents with Links which point to sections referenced (e.g. link of text "Section 2.2" points to the actual page number of "Section 2.2"), but as the links are created from cross-references during rendition from Word to PDF, there are cases that the destination page number and source page number of the links are the same (e.g. links of text "Section 2.2" on page 9 are created with the destination of page 9 which is the actual page number of "Section 2.2"), I want to remove all these links, but I don't know how to get the destination page, I check the API reference and find that "PDLinkAnnotGetAction" may work , but I don't know how to use it, could you check me codes below and advise ? Your help is really appreciated!
PDPage page;
ASInt32 i,i2;
AVDoc avDoc = AVAppGetActiveDoc();
PDDoc pdDoc = AVDocGetPDDoc (avDoc);
int pageNum = PDDocGetNumPages(pdDoc);
for (i = pageNum - 1; i >= 0; i--)
page = PDDocAcquirePage(pdDoc, i);
int annotNum = PDPageGetNumAnnots(page);
for (i2 = annotNum - 1; i2 >= 0; i2--)
if...
PDPageRemoveAnnot(i, i2);
My Product Information:
Acrobat Pro 8.1.6, Windows

Start by reading the PDF standard (ISO 32000-1) to understand Actions vs. Destinations.
Then for each annot, you'll want to see which it has (and in the case of an Action, if it has more than one). Then you need to parse the action or dest to see what it is and where it goes. If you don't like it, then you'll delete it.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Tue, 25 Oct 2011 09:25:32 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: How to remove links pointing to the same page?
How to remove links pointing to the same page?
created by OALD<http://forums.adobe.com/people/OALD> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3989576#3989576

How to make different size images the same size pdf in Acrobat.

I am trying to place 2 different size images into acrobat to create a pdf but one image is half the size. How do i make each page the same size when the images are different sizes?

Thank you, I changed the image size to match and then placed them in acrobat.

How to keep desktop folders in the same place?

I use an iMac (with Mac OS X V.10.6.6) and I have some folders and files on my desktop. However, lately after I shutdown my iMac and start it again, all the folders and files on my desktop move and scatter. I want to keep them in the same order that I originally arranged. How do I keep them in the same place? Is it normal for them to move around after shutdown?
It´s a new iMac (with about 6 monts old) and it only appens sometimes...
PS. I don't want to sort them out by name or date modified or anything like that. I just want to keep them in the same order that I put them.

As this oddity strikes also on my machine, I wrote this script.
--[SCRIPT récupérerrestaurer_positionicônes]
Enregistrer le script en tant que Progiciel (Application sous 10.6.x) : récupérerrestaurer_positionicônes.app
Installer dans le Dock.
Sélectionner les icônes du bureau dont la position doit pouvoir être rétablie.
Lancer le script
Cliquer le bouton "Enregistrer leur position"
Un fichier texte contenant les informations relatives à ces icônes sera créé dans le dossier défini à partir de la property 'dest'
Par défaut c'est dans "<startupVolume>:Users:<userAccount>:Library:Application Support:".
Pour remettre les icônes en place, lancer l'application et cliquer le bouton "Rétablir leur position"
--=====
Save the script as an Application Bundle (Application under 10.6.x) : récupérerrestaurer_positionicônes.app
Install it in the Dock for easy access.
Select Desktop's icons whose location must be reset when needed.
Run the script.
Click the button "Get there position".
A text file containing the datas linked to these icons will be created in the folder defined according to the property 'dest'.
Default location is : "<startupVolume>:Users:<userAccount>:Library:Application Support:".
Run the script and click the button "Reset there position" to move the icons back to their original location.
--=====
KOENIG (VALLAURIS, France)
2010/03/16
--=====--=====
property toutlebureau : true
property dest : 3
1 = liste dans : "<startupVolume>:Users:<userAccount>:Library:Preferences:"
2 = liste dans : "<startupVolume>:Users:<userAccount>:Applications:Utilities:"
3 = liste dans : "<startupVolume>:Users:<userAccount>:Library:Application Support:"
property nomDuRapport : "position des icones.txt"
property rapport : {}
--=====
on run
run script mon_script
end run
script mon_script
my nettoie()
if dest = 1 then
set p2d to path to preferences as text (*
"<startupVolume>:Users:<userAccount>:Library:Preferences:" *)
else if dest = 2 then
set p2d to path to utilities folder from user domain as text (*
"<startupVolume>:Users:<userAccount>:Applications:Utilities:" *)
else
set p2d to (path to library folder from user domain as text) & "Application Support:" (*
"<startupVolume>:Users:<userAccount>:Library:Application Support:" *)
end if
set p2r to p2d & nomDuRapport
if my parleAnglais() then
set prompt to "What to do with icons ?"
set {btn1, btn2, btn3} to {"Cancel", "Get their position", "Reset their position"}
else
set prompt to "Que faire avec les icônes ?"
set {btn1, btn2, btn3} to {"Abandonner", "Enregistrer leur position", "Rétablir leur position"}
end if
set maybe to button returned of (display dialog prompt buttons {btn1, btn2, btn3} default button 3)
if maybe is btn1 then (*
Cancel / Annuler *)
error number -128
else if maybe is btn2 then (*
Get their position / Enregistrer leur position *)
tell application "Finder"
set itms to name of every item of the desktop
repeat with itm in itms
try
set {x, y} to get desktop position of item itm
copy "" & itm & return & x & ", " & y to end of my rapport
end try
end repeat
end tell -- Finder
set rapport to my recolle(my rapport, return)
crée un fichier texte dans le dossier "Bibliothèque:Application Support" du compte utilisateur *)
tell application "System Events"
if exists file p2r then delete file p2r
make new file at end of folder p2d with properties {name:nomDuRapport}
end tell -- System Events
write rapport to (p2r as alias)
else (*
Reset there position / Rétablir leur position *)
set my rapport to paragraphs of (read file p2r)
repeat with i from 1 to ((count of rapport) - 1) by 2
try
set itm to item i of rapport
tell application "Finder" to set desktop position of item itm to my decoupe(item (i + 1) of rapport, ", ")
end try
end repeat
tell application "Finder" to update folder p2d
end if
my nettoie()
end script
--=====
on nettoie()
set my rapport to {}
end nettoie
--=====
on decoupe(t, d)
local l
set AppleScript's text item delimiters to d
set l to text items of t
set AppleScript's text item delimiters to ""
return l
end decoupe
--=====
on recolle(l, d)
local t
set AppleScript's text item delimiters to d
set t to l as text
set AppleScript's text item delimiters to ""
return t
end recolle
--=====
on parleAnglais()
local z
try
tell application "Finder" to set z to localized string "AL1"
on error
set z to "Cancel"
end try
return (z is not "Annuler")
end parleAnglais
--=====
--[/SCRIPT]
I run it by hand to get the icons positions.
I may also run it to restore these positions but in real life, I use a subset of the same script which is automatically ran when I boot the machine.
This subset retain only the code restoring the icons positions.
--[SCRIPT récupérerrestaurer_positionicônes]
Enregistrer le script en tant que Progiciel (Application sous 10.6.x) : récupérerrestaurer_positionicônes.app
Installer dans le Dock.
Sélectionner les icônes du bureau dont la position doit pouvoir être rétablie.
Lancer le script
Cliquer le bouton "Enregistrer leur position"
Un fichier texte contenant les informations relatives à ces icônes sera créé dans le dossier défini à partir de la property 'dest'
Par défaut c'est dans "<startupVolume>:Users:<userAccount>:Library:Application Support:".
Pour remettre les icônes en place, lancer l'application et cliquer le bouton "Rétablir leur position"
--=====
Save the script as an Application Bundle (Application under 10.6.x) : récupérerrestaurer_positionicônes.app
Install it in the Dock for easy access.
Select Desktop's icons whose location must be reset when needed.
Run the script.
Click the button "Get there position".
A text file containing the datas linked to these icons will be created in the folder defined according to the property 'dest'.
Default location is : "<startupVolume>:Users:<userAccount>:Library:Application Support:".
Run the script and click the button "Reset there position" to move the icons back to their original location.
--=====
KOENIG (VALLAURIS, France)
2010/03/16
--=====--=====
property toutlebureau : true
property dest : 3
1 = liste dans : "<startupVolume>:Users:<userAccount>:Library:Preferences:"
2 = liste dans : "<startupVolume>:Users:<userAccount>:Applications:Utilities:"
3 = liste dans : "<startupVolume>:Users:<userAccount>:Library:Application Support:"
property nomDuRapport : "position des icones.txt"
property rapport : {}
--=====
on run
run script mon_script
end run
script mon_script
my nettoie()
if dest = 1 then
set p2d to path to preferences as text (*
"<startupVolume>:Users:<userAccount>:Library:Preferences:" *)
else if dest = 2 then
set p2d to path to utilities folder from user domain as text (*
"<startupVolume>:Users:<userAccount>:Applications:Utilities:" *)
else
set p2d to (path to library folder from user domain as text) & "Application Support:" (*
"<startupVolume>:Users:<userAccount>:Library:Application Support:" *)
end if
set p2r to p2d & nomDuRapport
if my parleAnglais() then
set prompt to "What to do with icons ?"
set {btn1, btn2, btn3} to {"Cancel", "Get their position", "Reset their position"}
else
set prompt to "Que faire avec les icônes ?"
set {btn1, btn2, btn3} to {"Abandonner", "Enregistrer leur position", "Rétablir leur position"}
end if
set maybe to button returned of (display dialog prompt buttons {btn1, btn2, btn3} default button 3)
if maybe is btn1 then (*
Cancel / Annuler *)
error number -128
else if maybe is btn2 then (*
Get their position / Enregistrer leur position *)
tell application "Finder"
set itms to name of every item of the desktop
repeat with itm in itms
try
set {x, y} to get desktop position of item itm
copy "" & itm & return & x & ", " & y to end of my rapport
end try
end repeat
end tell -- Finder
set rapport to my recolle(my rapport, return)
crée un fichier texte dans le dossier "Bibliothèque:Application Support" du compte utilisateur *)
tell application "System Events"
if exists file p2r then delete file p2r
make new file at end of folder p2d with properties {name:nomDuRapport}
end tell -- System Events
write rapport to (p2r as alias)
else (*
Reset there position / Rétablir leur position *)
set my rapport to paragraphs of (read file p2r)
repeat with i from 1 to ((count of rapport) - 1) by 2
try
set itm to item i of rapport
tell application "Finder" to set desktop position of item itm to my decoupe(item (i + 1) of rapport, ", ")
end try
end repeat
tell application "Finder" to update folder p2d
end if
my nettoie()
end script
--=====
on nettoie()
set my rapport to {}
end nettoie
--=====
on decoupe(t, d)
local l
set AppleScript's text item delimiters to d
set l to text items of t
set AppleScript's text item delimiters to ""
return l
end decoupe
--=====
on recolle(l, d)
local t
set AppleScript's text item delimiters to d
set t to l as text
set AppleScript's text item delimiters to ""
return t
end recolle
--=====
on parleAnglais()
local z
try
tell application "Finder" to set z to localized string "AL1"
on error
set z to "Cancel"
end try
return (z is not "Annuler")
end parleAnglais
--=====
--[/SCRIPT]
As it was for my own use, I didn't change the explanations at the beginning.
Yvan KOENIG (VALLAURIS, France) jeudi 3 février 2011 12:37:56

How to install several instances of the same application on a computer?

Hej,
I have an application in LV 2009, where I have created an installer. The installer installs to a directory called \Receiver relative to the Program Files directory. If I install this once to a computer, everything is OK.
However, I want to install the same application twice on the same computer. There should be no conflicts between the two applications, since I can configure them to work on different directories and ports. But if I call the installer again, and selects another directory, nothing is installed and I get the message "Installation Summary - No software will be installed or removed". It seems like the installer ignores that I have selected another directory, and just uses the default directory, relative to the Program Files directory.
Anyone knows the trick, how to install several instances on the same computer ?
BR, Jan
Jan Nielsen
Freelance system analyst and LabVIEW programmer

Hi Jan,
This is so because each installer has a GUID that is used to check whether the application needs to be upgraded or not. (It's a Microsoft function).
What you can do is create a new installer with a different GUID (copy the installer in the projects), and check witha text editor whether this GUID has changed.
But any specific reason you need two seperate installs? You can run the application twice with a specific INI token:
allowmultipleinstances=True
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

HT5622 I own three Apple devices, but my iPad remained associated with my old email address and password. How can I register it with the same new email and password?

I own three Apple devices, but my iPad remained associated with my old email address and password. How can I register it with the same new email and password?

If you updated your existing account then try logging out of it on the iPad by tapping on the id in Settings > Store and then log back in and see if that 'refreshes' the account on the iPad. If you created a new account then any content that you purchased/downloaded via the old account will remain tied to that old account, and only that old account can download updates to its apps.

Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place. Tks

Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place? I know there are different possibilities to set.
I tried but it not helped for me. What I can do? How and where can set this they stay on their place?
Thanks.
laci

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Hi How do we create Methods inside the Business objects of Z

Hi Abapers,
                    How do we create Methods inside the Business objects (z objects) and how *** an import parameter or export parameter to be defined for the new Methods.
Regards
Bhaskar Rao.M

Hi Bhaskar,
that ´s not difficult.
Open your Bus.Obj. in SWO1 with CHANGE/EDIT
Click on the "Methods" header line and then use the button for "Create".
If you want to add the method on basis of a function module, choose next in the next pop up. Then the system will offer you the ex/import parameter from the function module. So this is a really simple way.
If you don´t have a FM, it is a little bit more difficult.
Choose No on the quetion about a FM, fill in the next pop up methode name (no blanks allowed).
Dialogue is for user related method (call screen...) synchronous for methods which have to give back a result directly in to the workflow.
After completing the screen the method will be displayed as new method at the end of method list. Now add parameters (first click on the method name, then choose parameter button, same functionality to add program to the method).
Programm:
Code snip:
BEGIN_METHOD ZWFCHECKMIRO CHANGING CONTAINER.
DATA:
      ZBELNR TYPE RBKP-BELNR,
      ZGJAHR TYPE RBKP-GJAHR,
      RESULT TYPE HRP1001-ISTAT,
      BELNR TYPE BKPF-BELNR,
      GJAHR TYPE BKPF-GJAHR,
      BUKRS TYPE BKPF-BUKRS.
to import parameter
SWC_GET_ELEMENT CONTAINER 'Zbelnr' ZBELNR.
SWC_GET_ELEMENT CONTAINER 'Zgjahr' ZGJAHR.
*(or SWC_GET_TABLE)
here add the functionality of your method!
to export parameter
SWC_SET_ELEMENT CONTAINER 'Result' RESULT.
SWC_SET_ELEMENT CONTAINER 'Belnr' BELNR.
*(or SWC_SET_TABLE)
!!! Important: naming convention!!! Use same writing of parameter names in
PARAM area (button PARAMETER) and here in code.
To use your method, change it to implemented after adding your code.
-> Edit -> Change release status -> object type component -> into implemented
(Sorry , have a german screen here, possibly terms are a little bit different.
Hope this helps a little bit.!
regards
Dirk

How do I create in Illustrator the same effect of 'color burn' in Photoshop?

Similar Messages

Maybe you are looking for