How do I create multiple TEBs with one submit button on one page in Captivate 7

I've read other posts on this topic (which refer primarily to earlier versions of Captivate) and am still at a loss as to how to put multiple text entry boxes on a page with one submit button. Here's my scenario:
I am creating test questions.
Each test question has multiple text entry boxes (for numbers only).
Student should be able to enter numbers into the textboxes in any order.
Then there is one Submit button that should initiate validating all the text entries, and move to a scoring page (so I can test it). (What would be best is if this button not only did the above, but also submitted scores to the LMS. But that is not my question at this time.)
I'd like this question to be set up as a template so that I can duplicate it, be able to add or delete text boxes and change the values required in the text boxes.
Here is an image of a sample question page with multiple TEBs. The yellow boxes tell the student where they need to enter text:
Any help or direction to help is appreciated!!

I think the problem here is that Arlhoolie wants all of the different TEBs to behave as if they were part of a single interaction that submits only ONE result to the quiz. Using multiple TEBs in Captivate means that you have multiple scored objects and therefore multiple results being submitted to the quiz.
If you want a single Success or Failure result submitted to the quiz based on the results from multiple interactive objects then there really is no simple way to do it. But you could try using the Infosemantics Interactive Master widget to combine all the TEBs as slave objects that report to the Master Widget, which then reports a single score to the quiz based on the results from the slave objects.
You can learn more about the Master widget here:
http://www.infosemantics.com.au/adobe-captivate-widgets/interactive-master
http://www.infosemantics.com.au/interactivemaster/help
You can download a free trial version of the widget here:
http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets
One caveat you should be aware of is that this widget is not HTML5 compatible.

Similar Messages

How do I create multiple TOC's (Tables of Contents) in one Pages document?

I'd like to have multiple TOC's (Tables of Contents) in one document. This is useful for me because I'd like to have a TOC for the regular chapters, then a TOC for the procedures, then a TOC for the tables in the document (it's a tech manual that I am writing). How can I do this? Thanks for any help you can render, and have a nice day!

fruhulda wrote:
If you haven't used a paragraph style it can't create a TOC but you get the blue box with the message.
Paragraph used.
It has nothing to do if there is one main TOC or several smaller TOC to do.
It isn't true that you can only have one TOC in a document. Use styles for your titles and headings. I do and it works fine without section breaks.
You also need to tick which tile and heading you want in the TOCs in the Document Inspector > TOC
Did that.
Thanks to Yvan's quoting from the User Guide, I see where it says each TOC only indexes the material up until the next TOC. Since I had them follow each other, that is why they had no content.
Still it defeats the objective of indexing different material throughout the document if all you get is what is between the TOCs.
Peter

How do I create multiple columns with bullets in pages

I'm trying to figure out how to create multiple columns within a document in which I bullet information...

At the point you wish to change to two columns, Insert > Columns and then in the Layout Inspector, select the number of columns. After the insertion point, you will also need to insert another Column Change to return the following paragraphs to single column.
Then Select the text to be bulleted and in the Text Inspector > List tab select the type of bullets.
Note: This creates two columns that flow together. This can be tricky if you add any text later.
If you wish to ensure alignment, create a two column text table and remove the lines with the Graphic Inspector > Lines > No Lines option and insert your text in each column and apply the bullets as above.
This will create a text box - you then need to ensure it moves with the text by electing "Object Moves With Text" in the Wrpa Inspector.
Message was edited by: bwfromspring hill

How do I create a report with a search button

All,
This may be a dumb question, but I am trying to create a report in Portal 3.0.9 with
a search button. I created the report using the 'create report by query' option and
that was fine. But what I really want to see is the customization page that shows
a field and 'run report' that a user can insert a record he/she is looking for.
For example:
Employee Id: ________
| Search |
Results if user enters a valid number
Employee Id : 1
Employee Name : John Smith
Employee Address: 111 Anywhere St. Anyplace USA
I can alter the customize page to make the search page fit my needs, but how do I create
a portlet out of the customize page and stick on my main page? When I run my report it
calls and returns all employees.
Thanks,
Dan

Hi,
You cannot publish the customization form as a portlet. The only way you can do this is to call the customization form from the dynamic page in the <oracle> tags. You can then publish this dynamic page as a portlet on the page.
Here is an example which calls the customization form of new_rpt2.
<HTML>
<HEAD>
<TITLE>Example</TITLE>
</HEAD>
<BODY>
<H2>Example of A Dynamic Page</H2>
<ORACLE>
begin
<schema_name>.NEW_RPT2.show_parms;
end;
</ORACLE>
</BODY>
</HTML>
Hope this helps.
Thanks,
Sharmila

How can I create multiple sales orders with reference to one contract?

Hello Gurus,
Can you please how can I create multiple sales orders with reference to one contract?
thanks!
Rakesh

hi
Lets consider example
In your contract for line item 1 you have entered qty 100
You careated sales order with 70 quantity, and now you want to creat another sales order for 30
For this first you need to check what is your item category in contract (VA42)
Goto VOV7
SPRO - IMG - Sales and distribution - Sales - Sales document item - Define item categories - Go to change mode
Make the completion rule = B Item is completed after full quantity has been referenced

How do I create multiple live USBs of Operating systems to boot from on one flashdrive?

How do I create multiple live USBs of Operating systems to boot from on one flashdrive?
I am attempting to create multiple live USBs within one flashdrive so that i can boot various operating systems without having to buy multiple USb sticks. I am using a Mac OS X Snow Leopard 10.6.8 Operating System currently. I am using the Terminal provided by the OS.
I would like to try Debian, Kali, Precise Puppy, and Sabayon- with one space left empty for whatever Linux OS I would like to try next. I have partitioned an 8GB flashdrive into the following sections:
name of intended OS,     space allocated for it:
1)Debian ........................1.32 GB
2)Kali..............................2.61GB
3)Precise Puppy..............163.7MB
4)Sabayon.......................1.77GB
5)TBD..............................2.14GB
I have figured out how to change the .iso files of the operating systems into .img files with the following commands:
hdiutil convert -format UDRW /path/to/input.iso -o /path/to/output.img
a .img.dmg file is created, this is corrected in the next line of code *please note: I am a a very beginner at programming, and would greatly appreciate any help. Thank you!
mv /path/to/output/file.img{.dmg,}
This is where I started to get confused:
I entered diskutil list to find the location of the partitions on my flashdrive, and this is the relevant section:
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *8.0 GB     disk1
   1:                 DOS_FAT_32 DEBIAN               1.3 GB     disk1s1
   2:                 DOS_FAT_32 KALI                    2.6 GB     disk1s2
   3:                 DOS_FAT_32 PRECISE            163.7 MB   disk1s3
   4:                 DOS_FAT_32 SABAYON           1.8 GB     disk1s5
   5:                 DOS_FAT_32 TBD                     2.1 GB     disk1s6
This is the code I attempted to use and the subsequent result:
charles-burtons-mac-mini:~ charlesburton$ sudo dd if=/Users/charlesburton/Desktop/debian-live-7.2-i386-gnome-desktop.img of=/dev/disk1s1 bs=1m
dd: /dev/disk1s1: Resource busy
*at this point I went to the Disk Utility GUi and unmounted only the DEBIAN partition, now back to the terminal*
charles-burtons-mac-mini:~ charlesburton$ sudo dd if=/Users/charlesburton/Desktop/debian-live-7.2-i386-gnome-desktop.img of=/dev/disk1s1 bs=1m
dd: /dev/disk1s1: end of device
1259+0 records in
1258+1 records out
1320005632 bytes transferred in 1011.966891 secs (1304396 bytes/sec)
Please may someone help explain why I had a return value of +1 in my records in and how I can make it work properly.

I would like to know the answer to this as well. I tried renaming the 3D version by adding 3D after it, but it still not a separate movie in iTunes.
It's putting them in the same folder.

How can i create excel sheet with multiple tabs using utl file?

how can i create excel sheet with multiple tabs using utl file?
any one help me?

Jaggy,
I gave you the most suitable answer on your own thread yesterday
Re: How to Generating Excel workbook with multiple worksheets

How can I make multiple quizzes with their own results slides within one project of Captivate 7?

In one Captivate 7 project I want to create multiple quizzes with their own results slide.
Currently I have 5 quizzes that all are linked to 1 results slide.
Is there a way to give each set of questions their own results slide?
(I saw a response to a similar question for Captivate 5 from 2012, but I couldn't get much use out of is and I figured there was an easier way in Captivate 7).
Any help would be appreciated!
Thanks!

Thanks for the reply Lilybiri!
I checked out the link and it's useful, however your other plan might work better for me:
Either you link to separate CP-files that have each their quiz, or you can show intermediate results slides (see link below), but you have to know that the score that will be transmitted to a LMS is the total score of all the quizzes.
But how exactly do I link separate CP-files? Do I have to publish them first and then link them, or can I link them before I publish?
If you could shoot me a link or some advice I'd greatly appreciate it. I'm finishing up a huge project that is due at the end of the day and this quiz issue is one of the last things keeping me from being finished.
Thanks!

Create multiple folders with one click on documents tab in BP in SAP CRM

Hi Experts,
I have a requirement to create multiple folders by clicking on a button in Documents tab in BP transaction in CRM. In standard process by clicking on create folder button we create folders. we want to create multiple folders with one single click ( i guess we can develop another button for that) folder name will be hard coded. Kindly let me know , how this can be achieved.

Hi Experts,
I have a requirement to create multiple folders by clicking on a button in Documents tab in BP transaction in CRM. In standard process by clicking on create folder button we create folders. we want to create multiple folders with one single click ( i guess we can develop another button for that) folder name will be hard coded. Kindly let me know , how this can be achieved.

How to create multiple files with Receiver File Adapter in SAP PI 7.31 Java Stack

Dear Friends,
I am using Sender JDBC Adapter and Receiver File Adapter in Integration Flow in SAP PI 7.3 EHP 1 SP08 Java Stack environment. The requirement is that we need to create multiple files based on the row count in jdbc resultset. If there are 5 rows in resultset, we need to create 5 XML files with one row elements in one file. Similarly if there are 10 rows, we need to create 10 XML files.
So how can we create multiple files in this scenario. I tried placing a for loop in the Java Mapping as below in the transform method:
DynamicConfiguration conf = arg0.getDynamicConfiguration();
StringBuffer sbFileData = new StringBuffer();
for (int i =0; i < record.size(); i++ {
     . // Create XML for each row and Marshal the object into to the String Buffer
     String strFileName = "DC_" + new SimpleDateFormat("ddMMyyyyHHmm").format(new java.util.Date())+"_"+i+".xml";
     conf.put(KEY_FILENAME, strFileName);
     arg1.getOutputPayload().getOutputStream().write(sbFileData.toString().getBytes("UTF-8"));
     arg1.getOutputPayload().getOutputStream().flush();
So here I'm flushing the OutputStream for each record. But it's not creating the multiple file, instead it creates only one file will all record XMLs appended to each other.
Please let me know if I missing something or need to do some thing else.
Regards,
Shreyansh Shah

Hi
You can easily achieve this using graphical mapping. Create your target message type like below
MT_Target
Details 0 to 1
      Data 0 to 1
Source sample structure
<resultset>
<row>
<column-name>column-value</ column-name>
</row>
Then do the message mapping like below
map <row> with MT_Target
contant ----> Deatils
column-name ------>Data
In the signature tab of message mapping, choose the occurrence of your target message type as
0 to unbounded.
This will generate multiple files from multiple rows.
Let me know if you have any doubt.

How do i creating multiple icloud accounts for one itunes account

how do i creating multiple icloud accounts to access one itunes account?

Perhaps you could explain a bit more what you want to do...
iCloud accounts don't access an iTunes account.
iTunes account is used to make purchases.

How do I create a dropdown with three options so that only one is visible in a form (non-flowable)

I'm working on a form which needs to provides three options for the user out of a drop down list. When the user chooses one option, only that subform is to be visible. Two of the three subforms are text fields, and the third subform is a series of fields which are editable by the user.
How do i create a dropdown with three options in it, so that in each instance only one subform is visible? This needs to happen in the same space on the main form.

Hi Nellie,
Here is the form back to you. There were three main issues:
In order for dynamic behaviour, like showing and hiding, the form must be saved as a Dynamic XML Form in the save-as dialog.
While you can use a minus sign when naming objects and subforms, it will cause scripts to fail. I have changed the name of the subforms so that they now use an underscore.
The dropdown had specified values in the Object > Binding palette (1, 2, 3), so the script needs to use these in the if statements.
When sharing forms on Acrobat.com, the best option is to select the file in your workspace and then click Publish. This will make it available to anyone who has the published URL.
I hope that helps,
Niall

How can i creat several rectangles with one draw rect.vi

how can i creat several rectangles with one draw rect.vi? thanks
Solved!
Go to Solution.

You can call it in a for loop, with an array of the rectangle coordinates you want to draw. Is this what you mean?
CLA, LabVIEW Versions 2010-2013
Attachments:
rectangle.png ‏11 KB

How can I combine multiple animations. (Play another animation after one has finished with a click?)

How can I combine multiple animations. (Play another animation after one has finished with a click?) Like a slideshow but with animations. any ideas?

You can do this by calling up the different edge Animate composition html pages using buttons and an iframe:
To get a general idea, put this in the body of an html page and insert your own URLs where indicated
<iframe id="iframeID" src="yourFirstURL" width="640" height="480">
<p>Your browser does not support iframes.</p>
</iframe>
<button onclick='loadIframe("iframeID", "firstAnimURL")'>First Animation</button>
<button onclick='loadIframe("iframeID", "secondAnimURL")'>Second Animation</button>
<button onclick='loadIframe("iframeID", "thirdAnimURL")'>Third Animation</button>
<script>
function loadIframe(iframeID,url) {
//alert("Hello");
document.getElementById("iframeID").src = url;
</script>
Peter Small

How can I return multiple values with PL/SQL Web Services

Hi,
I'm new to developping Web Services. I'm doing some tests with JDeveloper and OC4J on my local machine with a Web Services based on a PL/SQL function within a package. Right now that function only returns one value. So the xml response only has one output.
I'd like to know how can I return multiple values with my PL/SQL Web Service. For example, if I want to return an employee's name and id? And that the xml contains two output : <employee>, <empid>?
Reginald
ps : I have searched the forum and I couldn't find an answer to this question, if that has been discussed AND answered before, can you please post the link? Thanks

Alright, I actually found my answer. Since this was asked I think as a followup somewhere else I'll give my answer.
It is very simple, all you have to do is create an Object Type and then Return that object type. After that, JDeveloper will take care of everything and you will have an xml response with multiple values. Here
{color:#ff0000}
create or replace TYPE person AS OBJECT
( id_interv number,
first_name VARCHAR2(50),
last_name VARCHAR2(50),
date_birth date
);{color}
Then your function used in your Web Service should look something like this :
{color:#ff0000}
function info_emp (p_empno IN VARCHAR2) RETURN person AS
l_emp person := person(-1,'','','');
BEGIN
SELECT first_name
,last_name
,emp_no
INTO l_emp.first_name
,l_emp.last_name
,l_emp.emp_no
FROM emp
WHERE upper(emp_no) = upper (emp_no);
{color}
{color:#ff0000}
RETURN l_emp;
EXCEPTION WHEN NO_DATA_FOUND THEN
l_emp := person (-1,'n/a','n/a','n/a');
RETURN l_emp ;
END info_emp;{color}
{color:#ff0000}{color:#000000}After that, this is what the xml response looks like :{color}{color}
<first_name xsi:type="xsd:string">John</first_name>
<last_name xsi:type="xsd:string">Doe</last_name>
<emp_no xsi:type="xsd:string">0250193</emp_no>

How do I create multiple TEBs with one submit button on one page in Captivate 7

Similar Messages

Maybe you are looking for