How do I create new versions of a large number of images, and place them in a new location?

Hello!
I have been using Aperture for years, and have just one small problem. There have been many times where I want to have multiple versions of a large number of images. I like to do a color album and B&W album for example.
Previously, I would click on all the images at one, and select new version. The problem is this puts all of the new versions in a stack. I then have to open all the stacks, and one by one move the new versions to a different album. Is there any way to streamline this proccess? When it's only 10 images, it's no problem. When it's a few hundred (or more) its rather time consuming..
What I'm hoping for is a way to either automatically have new versions populate a separate album, or for a way to easily select all the new versions I create at one time, and simply move them with as few steps as possible to a new destination.
Thanks for any help,
Ricardo

Ricardo,
in addition to Kirby's and phosgraphis's excellent suggestions, you may want to use the filters to further restrict your versions to the ones you want to access.
For example, you mentioned
I like to do a color album and B&W album for example.
You could easily separate the color versions from the black-and-white versions by using the filter rule:
Adjustment includes Black&white
or
Adjustment does not include Black&white
With the above filter setting (Add rule > Adjustment includes Black&White) only the versions with Black&White adjustment are shown in the Browers. You could do similar to separate cropped versions from uncropped ones.
Regards
Léonie

Similar Messages

How do i create a website that allows customer to upload images and text?

I need some help i have a friend who has asked me if i can create a website that allows them to upload their own images and text at their leisure.
His company is in the car sales trade so they need to regularly be updating their stock, and this needs to be done by somebody with limited computer knowledge so ease of use is fairly important.
I am using dreamweaver cs4 on a G5 Imac running Snow leopard 10.6.8, my skills are limited to creating uncomplicated websites but i am very keen to learn, i am aware of content management systems such as Druplal but have zero knowledge on how to use these.
Any assistance would be greatly appreciated
Andy Barrington
www.andybarrington.com

You can take a read here
http://www.hotscripts.com/category/php/scripts-programs/classified-ads/autos/
http://icloudcenter.com/auto-dealer-car-sales-script.htm
Although putting together a form that would upload images and all the descriptions required seems like a fairly straghtforward project, depending on your current skill set.
Gary

TA48312 how do i download software version 4.0 for i phone 3gs and get rid of the new version?

how do i download a older version? so my phone has 4.0 and will work again?

@ jscher2000
Thanx for that link!! Using Firefox for years and this new download thing is one of the worst things they did to a perfectly fine feature of FF :(

How can I create multiple versions of a video within the same project?

OK...this is a probably a very basic question but I'm not sure how to word it clearly.
How can I create multiple versions of a video within the same project? What I mean is that I have a bout 50 minutes of video and I want to make two DVDs using different clips from this original 50 minutes of footage. It would be a real pain to have to re-import the video AGAIN for the second DVD. I suppose I could drop anything I don't want to burn to DVD back into the clips pane but that would wipe out all my transitions wouldn't it? I want to save each project in their “raw” form so I can burn additional DVDs later otherwise I would just do them one at a time and not care about one of them being destroyed.
Wow...that was a mess. Does anyone understand what the heck I’m asking? I hope so.

How can I create multiple versions of a video within the same project?
You can't. You make separate projects using the same or different clips, segments, transitions, titles, etc. You can even duplicate the first project and then modify/make the desired changes in the duplicated project. Each project can then be burned as a different DVD or as different titles on the same DVD if there is enough room.

How can i create multiple versions of a photo in ios8?

I Often want to create different versions of the same photo....with different crops, contrast, etc and keep them. In iPhoto, that was done with the duplicate command, but there does not seem to be the same capability in ios8. Any ideas?

How can I create multiple versions of a video within the same project?
You can't. You make separate projects using the same or different clips, segments, transitions, titles, etc. You can even duplicate the first project and then modify/make the desired changes in the duplicated project. Each project can then be burned as a different DVD or as different titles on the same DVD if there is enough room.

How can I change the version of iTunes store back to UK, as I've just loaded new IOS version and the phone is loading the US iTunes store. Thanks.

How can I change the version of iTunes store back to UK, as I've just loaded new IOS version and the phone is loading the US iTunes store. Thanks.

http://support.apple.com/kb/ht1311

How to use BAPI to add a new version for a claim number in WTY transaction.

How to use BAPI to add a new version for a claim number in WTY transaction.
I am using function module " BAPI_WARRANTYCLAIM_ADD_VERSION ".
It needs to copy all contents of previous version to a new version.
While doing so i am unable to copy fields like valic valoc etc. Any ways by which i can copy this values.
WTY will update PNWTYH , PNWTYV and PVWTY tables.
Thanking you,
Lokesh.

Hi Vishnu,
You can do that through EEWB. Please go through SAP Note 484597. You would get the details of using Easy Enhancement Work bench.
Rewards point if you think this info is useful
Regards,
Dipender Singh

How to download new version of ios 5.0 in my ipod ? i cant download new apps and i cant connect to itunes store.

how to download new version of ios 5.0 in my ipod ? i cant download new apps and i cant connect to itunes store.?

Only with iOS5 or later you can update/upgrade directly from the iPod/iPhone.
When your version of iOS is lower than 5, you must connect to iTunes and then update.
It is best when you update iTunes to the latest version first.
Lex

How do I create a 1d array that takes a single calculation and insert the result into the first row and then the next calculation the next time the loop passes that point and puts the results in thsecond row and so on until the loop is exited.

The attached file is work inprogress, with some dummy data sp that I can test it out without having to connect to equipment.
The second tab is the one that I am having the problem with. the output array from the replace element appears to be starting at the index position of 1 rather than 0 but that is ok it is still show that the new data is placed in incrementing element locations. However the main array that I am trying to build that is suppose to take each new calculation and place it in the next index(row) does not ap
pear to be working or at least I am not getting any indication on the inidcator.
Basically what I am attempting to do is is gather some pulses from adevice for a minute, place the results for a calculation, so that it displays then do the same again the next minute, but put these result in the next row and so on until the specifiied time has expired and the loop exits. I need to have all results displayed and keep building the array(display until, the end of the test)Eventually I will have to include a min max section that displays the min and max values calculated, but that should be easy with the min max function.Actually I thought this should have been easy but, I gues I can not see the forest through the trees. Can any one help to slear this up for me.
Attachments:
regulation_tester_7_loops.vi ‏244 KB

I didn't really have time to dig in and understand your program in depth,
but I have a few tips for you that might things a bit easier:
- You use local variables excessively which really complicates things. Try
not to use them and it will make your life easier.
- If you flowchart the design (very similar to a dataflow diagram, keep in
mind!) you want to gather data, calculate a value from that data, store the
calculation in an array, and loop while the time is in a certain range. So
theres really not much need for a sequence as long as you get rid of the
local variables (sequences also complicate things)
- You loop again if timepassed+1 is still less than some constant. Rather
than messing with locals it seems so much easier to use a shiftregister (if
absolutely necessary) or in this case base it upon the number of iterations
of the loop. In this case it looks like "time passed" is the same thing as
the number of loop iterations, but I didn't check closely. There's an i
terminal in your whileloop to read for the number of iterations.
- After having simplified your design by eliminating unnecessary sequence
and local variables, you should be able to draw out the labview diagram.
Don't try to use the "insert into array" vis since theres no need. Each
iteration of your loop calculates a number which goes into the next position
of the array right? Pass your result outside the loop, and enable indexing
on the terminal so Labview automatically generates the array for you. If
your calculation is a function of previous data, then use a shift register
to keep previous values around.
I wish you luck. Post again if you have any questions. Without a more
detailed understanding of your task at hand it's kind of hard to post actual
code suggestions for you.
-joey
"nelsons" wrote in message
news:[email protected]...
> how do I create a 1d array that takes a single calculation and insert
> the result into the first row and then the next calculation the next
> time the loop passes that point and puts the results in thsecond row
> and so on until the loop is exited.
>
> The attached file is work inprogress, with some dummy data sp that I
> can test it out without having to connect to equipment.
> The second tab is the one that I am having the problem with. the
> output array from the replace element appears to be starting at the
> index position of 1 rather than 0 but that is ok it is still show that
> the new data is placed in incrementing element locations. However the
> main array that I am trying to build that is suppose to take each new
> calculation and place it in the next index(row) does not appear to be
> working or at least I am not getting any indication on the inidcator.
>
> Basically what I am attempting to do is is gather some pulses from
> adevice for a minute, place the results for a calculation, so that it
> displays then do the same again the next minute, but put these result
> in the next row and so on until the specifiied time has expired and
> the loop exits. I need to have all results displayed and keep building
> the array(display until, the end of the test)Eventually I will have to
> include a min max section that displays the min and max values
> calculated, but that should be easy with the min max function.Actually
> I thought this should have been easy but, I gues I can not see the
> forest through the trees. Can any one help to slear this up for me.

How to change bundle short version to a higher number?

How to change bundle short version to a higher number?
Apple has rejected my dist-view file as my old version of the app had a bundle short version key of 1.5 but DPS makes a 1.0 version. I believe that only Adobe can change this. Can you please tell me who to contact?

Thank you.
The App name is Exploring Essential Anatomy. app id: eea19102012. The folder number is 2.1. Using DPS app builder 2.3.2.70.60038.
The bundle version is 2.8.0.4.59944
The bundle version short string is 1.0.3
The problem is that the old bundle short string (of my previous build using xcode) is 1.5.
Hence new short string needs to be 1.6 or higher.
Sorry, not sure if this is the info you need

How do I get the pictures folders in photoshop 7 out of My window XP computer and put them into my new computer windows 8 photoshop12

How do I get the pictures folders in photoshop 7 out of My window XP computer and put them into my new computer windows 8 photoshop12

I am so sorry for you and your situation. Were you using iCloud photostream?
Otherwise I do not see any chance for your precious photos.
Congrats anyway on the little darling!

How can i transfer my songs from my nano to a new itunes account because when i try to it tells me that i need to errase whatever is on the nanno ans then i can sync whats on my itunes but i want to put these songs and store them onto this new itunes acc

how can i transfer my songs from my nano to a new itunes account because when i try to it tells me that i need to errase whatever is on the nanno ans then i can sync whats on my itunes but i want to put these songs and store them onto this new itunes acc

Your i-device was not designed to be a reliable unique storage for your media. It is not a backup device and everything is structured around you maintaining your media on a computer which is itself backed up. Sync transfer is one way, computer to device, matching the device content to the content on the computer. If the computer has nothing on it, the device is set to match the computer's content -- nothing.The exception is purchased content.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only media purchased from iTunes Store
For transferring other items from an i-device to a computer you will probably have to use third party commercial software unless you have an older model iPod. Examples (check the web for others; this is not an exhaustive listing, nor do I have any idea if they are any good):
- Senuti - http://www.fadingred.com/senuti/
- Phoneview - http://www.ecamm.com/mac/phoneview/
- MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/ - Mac & Windows
- Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
- Snowfox/iMedia - http://www.mac-videoconverter.com/imedia-transfer-mac.html - Mac & PC
- Yamipod (free) - http://www.yamipod.com/main/modules/downloads/ - PC, Linux, Mac [Still updated for use on newer devices? No edits to site since 2010.]
- Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141 - dates from 2008 and some outdated information now.
Copying Content from your iPod to your Computer - The Definitive Guide - http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/ - Information about use in disk mode pertains only to older model iPods.
Additional information here https://discussions.apple.com/message/18324797

How do I take music from my itunes on my iPhone 4s that I did not purchase and put them on my new computer without deleting anything

How do I take music from my itunes on my iPhone 4s that i didnt purchase and transfer them to my new itunes without deleting anything. I do not have my old computer and do not want to delete all my music on my phone. I do have some music i did purchase and transfered it but that music i didnt purchase, i dont know how to transfer. HELP!!!!!!

Music is designed to sync in one way only, and that is from iTunes to the phone. There is the expectation that you would backup the computer to save this data. There are 3rd party solutions to try and recover music from the phone to put back into a blank iTunes library.
See this user generated tip for help https://discussions.apple.com/docs/DOC-3141

My old computer hardware crash I cannot retrieve any songs I bought a new computer and would like to retrieve the songs I have paid for and put them in my new computer how do I do that thank you

Need a little help my computer hard drive crashed and I bought a new computer and would like to retrieve my many songs that I paid for and upload them to my new computer how Retrieve my music t thank you

Either restore it from a backup, or use these instructions to redownload it through the iCloud.
(84741)

Ok I can't seem to get my apps,music, or photos from my iCloud from when I first setup iCloud on a iPhone 4. How do I get my things back from the iCloud and get them to my new device?

Ok I can't seem to get my apps,music, or photos from my iCloud from when I first setup iCloud on a iPhone 4. How do I get my things back from the iCloud and get them to my new device?

If you no longer have the phone or have any Backup of it at all, you can re-download your apps and your content from the iTunes Store by logging into your Apple ID at settings> iTunes & App Store. Unfortunately you can no longer recover the data that was associated with those apps.
So far as your photos go, you can recover any photos that were in photo stream and taken less than 30 days ago by logging in with your Apple ID to settings> iCloud> photos. Unfortunately you will be unable to recover any photos from your camera roll.

How do I create new versions of a large number of images, and place them in a new location?

Similar Messages

Maybe you are looking for