How do I create sub-pages in iWeb?

Hi, How do I create sub-pages in iweb like it does in this website
http://www.e-alliance.ch/index.php?id=405
with all the main menus "about us", "advocacy capacity", etc?
Thank you for your help!!!
Boaz

To create sub pages, just ensure that the main menu item is in the main menu and then for the sub pages themselves, ensure that they are NOT in the main menu and you link back by creating links instead.
For example, you could use Staff as a main menu item, so Staff would be in the main menu and then descriptions of different staff members would be underneath, but not in the main menu - they would have separate links that you create and then hyperlink.
If you want to make drop down menus in iWeb, as in the site that you linked to, you can't do this directly in iWeb itself. You have to make it and then upload various css files to your web host and link to it in iWeb etc. It is quite a complex task to create drop down menus in iWeb. If you want to do that, then I would suggest that you use a different app instead - take a look at http://www.everwebapp.com.

Similar Messages

Creating sub-pages in iWeb'09?

Hello!
i've just starte using iWeb, and trying to create my own web page. I can't find a solution on the above: how can i create "sub-pages"? For example: I want to create a main page called Photos (appearing in main menu bar), and UNDER this page i want to create "sub-pages" called photos1, photos2, photos3, etc. (appearing UNDER Photos page).
How can I do this?
Thanks,
Bazsi21

Hello:
I just read your post regarding creating web pages in iweb. This is something i have been trying to do also. Do you happen to know whether there's a way of creating sub pages from the main navigation menu, rather than pasting hyperlinks into the page. If i create an envertainment magazine, and one section is "movies", then I want all articles on movies to fall within that category, WOuld be far easier if visitors click on 'movies' link in navigation bar, and then see the list of articles. Is there a way to do this in iweb?
If not, i am wondering why Apple didn't include this basic necessity when creating the program.
I look forward to hearing from you.
Thanks.

How do I create sub pages/menus in Creative Cloud?

How do I create sub pages/menus in Creative Cloud?

If you're looking for a replacement for the deprecated Spry Menus, look at the links below.
Pure CSS Drop-Menu
http://jsfiddle.net/NancyO/zN7fU/
CSS3 Dropdown Menus
http://www.red-team-design.com/css3-dropdown-menu
PVII's Pop-Menu Magic3 (commercial DW extension)
http://www.projectseven.com/products/menusystems/pmm3/index.htm
jQuery Superfish
http://users.tpg.com.au/j_birch/plugins/superfish/
jQuery MegaMenu 2
http://www.geektantra.com/2010/05/jquery-megamenu-2/
Nancy O.

How to add sub pages in iWeb templates

Anybody knows how to add a sub pages in the templates? I want to add sub pages under the main header, e.g. "About Us."

Just to say that you can do it in the way that Steve has already said and I did this on one of my sites and it worked really well.
Lets take your example of About George. You create your page About George and you include this page in your navigation menu. Now lets suppose that you have more that you want to add about George with two other pages - George at Work and George at Play. You want to link to these pages from About George, but you don't want the page names visible. Well, you can do this by creating the pages and then going to Inspector. Click on pages and then check don't include in navigation menu. Then you can create links on the About George page to get to the other pages George at Work and George at Play - use shapes or text boxes to create these with something like Back and Next on those pages to take you forward to the next page and then back to the main page.
I think you will need to create your own nav bar to be able to achieve this, as it means linking to different pages, but it does work well.

Creating sub pages

How does one do this in iWeb?

Keep main page in the navigation menu and then for your sub pages, you don't put them in the nav menu - open the Inspector and then click on Page and then click on the box that has "don't include page in nav menu" and that is it.
You then create your own links on the sub pages back to the main page and wherever you want by using either shapes or text boxes or whatever.
To make the whole process easier, you could always ditch the iWeb page template nav menu by turning it off and creating your own text based nav menu, which makes creating sub pages easier - you just don't include what you don't want.

How Do I Create A Slideshow in Iweb?

How do I Create a slideshow in Iweb with arrows to right and left, just like this link:
http://www.thinkfa.com/
Thanks in advance!

It's done with java script. Here is one example on this demo page: AutoViewer which is created in iPhoto with the Flash Album Exporter plugin.
Another source is Jalbum. It have over 100 skins/themes, one of which should match what you want.
OT

Creating new pages in iWeb

Could someone assist please with creating new pages within a page - that is if I need to follow from
a previous page with in context stuff, but I don't want a NEW page with a NEW page heading at the top.
I just want to put more stuff up under an existing page heading and using an arrow to go to new page
all in the same section. Rather than filling the top with new page headings. Sorry if I cant explain it better! Thanks - Gareth

This works for your site because it is mostly photos and you have used the Photo Page, fine. However, what you need to remember is that many people just have ordinary websites without photos who might still want to use sub pages and this method will not work for them because there are not forward and back links.
I have sub pages on my own website and basically, I created an About Us page. I have some text there, but then I have something that says find out more about these people. I did not want these other pages displayed in the main nav bar, so I took them all out and what I have done on the About Us page is use a shape with the name of the person in it and created a hyperlink to that page. You click on the relevant shape and this takes you to the page for that person - on this page I have then created a shape with Back and Forward in it - the Back hyperlink if clicked on takes you back to the About Us page and the Forward hyperlink takes you to the page for the next person etc.
If you want to create sub pages on an ordinary web site, then this is how you need to do it - you need the links on the pages that are not in the main nav bar to be able to get around the site.
You don't have those links on your site, but as it is mainly photos then this does not matter and works for you, as you go from gallery to gallery. This will not work for everyone though - horses for courses! What works for one might not work for another.

How to add/create additional page in Crystal Report Layout SAP B1

Hi,
I wanna ask about How to add/create additional page in Crystal Report Layout SAP B1 ?
I want when user print Purchase Order then on last page also print some page like Penalty Clause etc.
Pls help me to find the solution.
Br,
Thomas Marsetyo

Hi,
In your report footer, set it to create a new page before it is printed (In 'Section Expert', select the Report Footer -> 'Paging' tab -> Check 'New Page Before' checkbox). Throw your Terms & Conditions into the Report Footer section.
If you already have a Report Footer that you want to keep, just split the footer into two sections (Right-click the Report Footer section -> 'Insert Section Below') and follow the same procedure for the newly created section.
Check this Link
http://stackoverflow.com/questions/9232239/adding-an-additional-page-to-end-of-a-crystal-report
http://www.crystalreportsbook.com/forum/forum_posts.asp?TID=18960
Regards,
Manish

RE: How can I create a page break in a file?

Thank you, Glen. I tried WriteText. But it didn't work.
Tien Wang
Indus Consultancy Services
[email protected]
From: Glen A. Whitbeck
Sent: Thursday, September 11, 1997 11:59 AM
To: Wang, Tien
Cc: forte-users; owner-forte-users
Subject: Re: How can I create a page break in a file?
Instead of using "WriteLine," try using "WriteText" ("WriteLine" writes
TextData into an open file, while "WriteText" writes data to a stream)
like this:
<method 1>
myFile : file = new();
myFile.WriteText('\f');
Glen
Wang, Tien wrote:
Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the
following
two methods, but neither of them works. Specifically, it seems a
special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
>
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt);

Tien,
Try myFile.WriteText('\x0c'); instead of myFile.WriteText('\f');
Regards
Richard Stobart
-----Original Message-----
From: Wang, Tien [SMTP:[email protected]]
Sent: Friday, September 12, 1997 6:09 PM
To: Glen A. Whitbeck
Cc: forte-users; owner-forte-users
Subject: RE: How can I create a page break in a file?
Thank you, Glen. I tried WriteText. But it didn't work.
Tien Wang
Indus Consultancy Services
[email protected]
From: Glen A. Whitbeck
Sent: Thursday, September 11, 1997 11:59 AM
To: Wang, Tien
Cc: forte-users; owner-forte-users
Subject: Re: How can I create a page break in a file?
Instead of using "WriteLine," try using "WriteText" ("WriteLine" writes
TextData into an open file, while "WriteText" writes data to a stream)
like this:
<method 1>
myFile : file = new();
myFile.WriteText('\f');
Glen
Wang, Tien wrote:
Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the
following
two methods, but neither of them works. Specifically, it seems a
special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
>
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt);

How can I create a page break in a file?

Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the following
two methods, but neither of them works. Specifically, it seems a special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt);
-----------------------------------

Tien,
Try myFile.WriteText('\x0c'); instead of myFile.WriteText('\f');
Regards
Richard Stobart
-----Original Message-----
From: Wang, Tien [SMTP:[email protected]]
Sent: Friday, September 12, 1997 6:09 PM
To: Glen A. Whitbeck
Cc: forte-users; owner-forte-users
Subject: RE: How can I create a page break in a file?
Thank you, Glen. I tried WriteText. But it didn't work.
Tien Wang
Indus Consultancy Services
[email protected]
From: Glen A. Whitbeck
Sent: Thursday, September 11, 1997 11:59 AM
To: Wang, Tien
Cc: forte-users; owner-forte-users
Subject: Re: How can I create a page break in a file?
Instead of using "WriteLine," try using "WriteText" ("WriteLine" writes
TextData into an open file, while "WriteText" writes data to a stream)
like this:
<method 1>
myFile : file = new();
myFile.WriteText('\f');
Glen
Wang, Tien wrote:
Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the
following
two methods, but neither of them works. Specifically, it seems a
special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
>
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt);

Can/How can I create a page with all my blog pages RSS??

Hello all.
I have a website containing many seperate Blog pages according to their topics like News, Tech and Scifi.
Is it possible to create a new page, that will contain the latest entries of all these blog pages a one "consolidated" page, maybe perhaps of RSS feed?
Thanks and cheers

Apple states
How can I create a page that aggregates my podcasts?
If you have multiple podcasts listed in the iTunes Store, the iTunes staff can create a single page that lists all of them in one place. We call this page an “artist page.” Note that a podcast can only appear on one artist page.
To request an artist page, navigate to one of your podcasts, click on Report a Concern, and select Remove a Podcast. In the dialog box, explain that you would like an artist page, give us the exact name of the artist (please don’t include “Inc,” “LLC,” etc.), and list the exact feed URLs or links to your podcasts.
at the bottom of this page
http://www.apple.com/itunes/podcasts/creatorfaq.html
I hope two is enough and if not that someone contacts me and maybe even changes the info on the above link.
Thank you for your input!

Create sub-pages programatically

Hi,
Is it possible to use the add_folder in PDK pl/sql api to create sub-pages to the root page of a content area programatically?
Thanks

hi,
this is the right function to create sub pages. for more information and an example check out:
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/plsql/doc/pldoc_9026/wwsbr_api.html#function-add_folder
regards,
christian

How do i create a page template in order to spawn new pages?

How do i create a page template in order to spawn new pages?

Where did you find the link/interface that led you to ask your question here?
You should find the forum for whatever product your question involves and post there.
Here is a link to a page that has links to all Adobe forums...
Forum links page:
http://forums.adobe.com/index.jspa

Does anyone know how I can create "facing pages" in new Pages? I could do it in Pages 09, but can't find the option in new Pages.

Does anyone know how I can create "facing pages" in new Pages? I could do it in Pages 09 but can't find the option in new Pages. I have documents created in Pages 09 and want to do some further work on them, but am now using new pages.

There were 100+ features that didn't make it into the "new & improved, rewritten from the ground up” Pages 5. Some have returned with the updates & there are some new features that are worthwhile, but there are still 90+ features missing. Leave feedback for the Pages team using the link in the Pages menu and review & rate the new versions in the Mac App Store.
If you previously had iWork '09, those apps are still in your Applications folder in a folder named iWork '09. You can continue to use them to get things done.

Sub-Pages on iWeb

Hello Forum! I am learning how to create an iWeb site. I'm curious to do the following:
If I want something like a sub-page, let's call it "My Portal", to be under the "About Me" link...how do I do that?
Another words, people that will come to visit my site, they'll see that there's an "About Me" link, but they won't see the "My Portal" sub-page, until they go to the "About Me" page. That's the only way "My Portal" will be visible.
Any thoughts?
Thanks so much in advance!!
NV27

Find out more about iWeb navigation here...
http://iwebfaq.org/site/iWebNavigationmenu.html
Larger sites are usually organized into main sections that are listed in the main navigation. Each main section has a sub menu to navigate around it.
In your case, About Me would be in the main navigation and My Portal, and any other pages you may want to add in the future, would be in the sub navigation. This is probably more than you want at the moment but will help you stay organized as you website grows.
Example ....
http://roddymckay.com/PlanetRoddy.html
Warning: I will only gain financially by providing this link if you make a purchase - please don't.

How do I create sub-pages in iWeb?

Similar Messages

Maybe you are looking for