How do I crop .mov file without changing aspect

Hi guys,
I'm looking to isolate a figure on blue screen into exactly 350 x 400 pixels for placement in a cd rom program. I've been able to size it down to 498 x 398 as a quicktime file, now I just need to crop a bit of the top and sides.
Sorenson squeeze crops but I don't want any compression on it. Final cut and quicktime won't crop, but change the aspect. Anyone know a good program for a mac (free) or a way to do cropping?
Thanks!

maven2 wrote:
It's actually getting distorted not in Final cut, but in Compressor when I tell it to output at 400 x 350.
then you'll need to go the other way, apply some squash to the FCP layer so it is flattened. when compressor messes with it, it will be unsquashed.
The distortion is probably entering your workflow in the original footage which has been captured one way (maybe as square pixels), flagged in the camera to be pulled/stretched out to 16x9 (as horizontal pixels), then you've brought it into a different aspect ratio sequence and exported it (as square or vertical pixels) but Compressor is probably seeing original PAR flag.
bogiesan

Similar Messages

Help...Move files without changing "date modified"?

I need to move files over from my old dead g4's hard drive to my intel mac book pro - but without altering the "date modified" in my documents and folders. I've pulled them over once, but all the files get tagged with the modification date I pull them onto the new hard drive.
Are there any utilities or software or tricks to do this?
Any help or direction will be appreciated.

Robert Stover wrote:
When you say <source> is that just the name of the hardrive I'm pulling from "New 250" or is the down to the file level... <New 250>users>documents>tcpa-report.doc>
Terminal requires complete file paths in the UNIX style, using slashes between parts of the path. The root of all paths for files on mounted volumes is "Volumes" but if that is omitted the path defaults to the startup volume. Spaces separate command parts, so you must also "escape" spaces that appear in path names or they will be interpreted as command part separators. To escape a character, either precede it with a backslash ("") or enclose the entire part of the path in quotes.
So, assuming "New 250" is not the startup (boot) volume, the UNIX style path to "tcpa-report" would be:
/Volumes/New 250/Users/Documents/tcpa-report.doc
If "New 250" is the boot drive, you could also use:
/Users/Documents/tcpa-report.doc
Fortunately, you don't have to remember any of this if you use the drag & drop capabilities of Terminal. Type the command up to the place where you need to enter a path (including typing the space just before it). Then drag the item whose path you need from the Finder into the Terminal window & drop it there. The path will automatically be formatted, including any escaping needed.
If you need to follow one path with another, just type the single space that must separate them & drag the other file path into the window. Obviously, if the second path doesn't exist yet, you can't do this but you can drag the enclosing item into the window & type the final part of the path yourself. You can also use copy & paste within Terminal: copy by dragging across text with the pointer to highlight it, copy, then paste at the cursor.

How to crop without changing aspect ratio/Crop mode

Is there a way to crop in Lightroom without changing the aspect ratio? That is my first question.
My second question, is it better to use APS-C crop mode on my full frame Sony A7R if I know at the focal length I'm gonna crop, or just take it full frame and crop in the software? Are there disadvantages to this when it comes to uses flash's etch?
Third, Currently I do not have a portrait lens as the Sony A7R is new and does not have many lenses out yet. Until the 90mm lens comes out I was thinking I could use the Zeiss 55mm 1.8 in Crop mode for a portrait lens. That would make it around 88mm would it compress the background nicely the way an 85mm lens normally does for portraits?

This is what I usually do, now I know for sure my aspect ratio has been locked. As far as shooting in crop mode though, what I meant about that is this; For portraits, if you take a 55mm and shoot a portrait with it, the background doesn't look that compressed, which I like. Even if it's at a good F stop. It'll be out of focus, but not "compressed" And seems to show more flaws in the person. This is why with my Canon I always used my 85mm or my 100mm. I know some who will only use a 200mm due to this type of compression that happens at longer focal lengths.
If I was to shoot in crop mode, making it 88mm, would it give me that affect? The compressed look I get from a 85mm? Or would it simply just crop it like I do in post and not really make a difference.
Sony has yet to come out with a portrait lens and I need one bad, I've been offered little jobs here and there and can't take them because I don't want to disappoint them. I'm waiting for their 90mm, because that is close the 100mm and 85mm I shot with on the 5D for portraits.
Not to same the subject here but, 'Benjamin Root Photography,' has been a great help to me on this forum. I also torn between getting the 16-35mm F/4, or the new 24mm F1.4 prime, for wide landscape shots, because landscape and hiking is where I do most of my photography.
I don't plan on actually shooting a landscape at 1.4, but if it's 1.4 that means if I stop it down to F 8 on a landscape it'll be tact sharp. But it is not a Zeiss and is only going to cost 500. On the other hand, there is the 16-35mm, still I'd shoot around F 8 or even higher for landscape, the problem is, if it's F/4 won't that mean it'll have to stop down much further than the 24mm to get a sharper picture?
I don't guess I can go telephoto, like anything over 100mm because I have the A7R. People say over 100 mm it has shutter vibration, so at 200 or 300 I wouldn't buy until the A7R ii comes out. I'm not willing to get the regular A7 ii because I really like the advantage of having all those megapixels for cropping purposes, and it just plain looks better. Which is why I took my Sony A7 back for the A7R. Everyone was saying the photo's were more impressive than the 5D Mark iii's with the Zeiss 55 1.8 vs 5D with 50 1.4L. That wasn't really the case with the A7, but when I got the A7R I seen a HUGE difference in dynamic range.
I've heard the A7 is better at focusing than the A7R, but since I switched to the A7R I have noticed literally no difference. But I don't shoot fast moving subjects.
With both cameras I notice the face detection and EYE AF is hard to get to work properly. If I let it auto focus fully It'll focus on the wrong thing a lot of times even though the green boxes say the right thing.
So, I have been putting it on a single point, keeping it at the center, focusing on the eye, and then recomposing. That's mostly how I did with the 5D anyway. I never allowed it to choose focus points for me either.

How can I convert .mov files for use with other apps?

When loading movies taken on a friend's digital camera to my PC, the video files were saved as Quicktime .mov files. I am now unable to pull those files into any other software program (I want to put them onto a CD or DVD and play on external players.) How can I convert .mov files to a .wmv or .avi or mpeg?
Thanks - J
RS720G Windows XP

Kodak Digital Camera QuickTime MOV Problems
After battling a number of serious problems with the videos taken by my new Kodak Digital Camera, I decided to write up this page so that anyone searching the web would find out the true answers without as much grief!
I’ve also made some other comments about my experience with the camera, in case anyone was considering buying a Kodak camera in the near future.
I bought the camera just before Christmas 2004 in the US. At the time of writing, it is a pretty good model for domestic use—about 5.2 megapixels, costing about US$400 (or AU$600 back here in Australia). From a company as reputable as Kodak, I expected no problems.
The first disappointing thing was that the spring inside the spring-loaded battery clip, inside the camera, came loose within days. It proved impossible to reattach it without completely dismantling the camera, which (despite my engineering qualifications) I was not willing to do. This would usually have been a warranty item, but Kodak’s warranty does not extend to other countries. I’ve since had to jam cardboard in to keep the battery clip engaged, and have taped the battery bay shut to avoid it opening accidentally when taking the camera out of the case. This works fine with the docking station (an extra AU$100!), but it means I can no longer charge the battery without the docking station (since you need to take it out to charge it). I was not impressed!
The camera takes good photos, and I have no complaint with that. The controls and camera menus are well-designed. The large display is excellent.
The EasyShare software is not as easy to use as it looks, has a habit of crashing, has a web update program that is always running in the background of Windows, and transferring images is nowhere as easy or quick as it should be. I’ve now uninstalled it completely, and simply copy the photos directly from the device. (If the camera memory is nearly full, and you just want to transfer the last few photos, then it’s impossible to use the EasyShare software to browse the camera’s photos without it actually downloading the whole lot through the USB cable—and it takes forever! Copying from the device directly doesn’t hit this bug.)
The capability to take video using the camera was a great attraction when I selected it, and, if it worked properly, it would make it quite a handy little camcorder in its own right. With a 512 MB memory card in it, over an hour of video can be recorded at Video-CD quality (320 x 240 24fps video, 8 kHz audio). It’s not full digital video, but it would still be a pretty good feature for a US$400 camera. If it worked.
The first disappointing thing about taking videos is that the optical zoom cannot be adjusted while the camera is recording. It can only be adjusted between video sequences. I don’t know why this restriction was made in the design.
The real problems, however, start when you try to do anything with the video clips captured by the camera. Kodak has chosen to capture the videos in QuickTime format. This is fine—QuickTime is, technically, excellent—except that there is no simple way to convert QuickTime MOV files to AVI or MPEG or VCD. The Kodak software comes with a QuickTime player, so you can see the video clips on the computer you installed the software on—and they look good. Problem is that you can’t just dump those MOV files onto your Video-CD creator (it will usually want AVI or MPEG files).
It takes some time to realise that Kodak have not even bothered to include any software with the camera that can convert these MOV files to a more useful format. This is a serious PR blunder, and anyone bitten by this is unlikely to go near the Kodak brand ever again.
After some web searching, owners of these cameras generally find that the best (only?) freeware solution to convert MOV to AVI is Bink and Smacker’s RADtools program.
RADtools is amazingly powerful for the price (i.e. free), but it hits two fundamental problems with Kodak Digital Camera MOV video files, that are the fault of the Kodak camera, not RADtools. (I know this because every other MOV converter hits the same problems—except one, as you will see below.)
The first problem is that the sound cannot be converted properly. When you convert any Kodak MOV files, there is an “aliasing” of the sound at the upper frequencies. This is a technical description—you get a whispery, tinny, C3PO type of echo to everything. It really destroys the quality of the video clips (especially bad when I am trying to capture priceless memories of my 4- and 7-year-old sons—I don’t want their voices destroyed for all time).
Every conversion program I tried ended up with the same audio problem. I concluded that it is something strange in the way the Kodak cameras store the MOV files.
Strangely enough, I noticed that the QuickTime player didn’t distort the audio like this. The audio sounds just fine through QuickTime. More on this shortly.
The second, more serious problem is that RADtools could not properly convert some of the video clips at all. (This problem only affected less than 10% of the clips I originally filmed, but most of those clips were very short—less than 20 seconds. It seems that the probability of this problem gets worse, the longer the clip.) RADtools would misreport the number of frames in the clip, and would stretch out a small number of frames of video (in slow motion) to match the length of the audio.
Again, I confirmed that this is a property of some of the MOV files stored by the camera. Other conversion tools also had problems with the same MOV clips.
After more angst, I found a number of websites in which frustrated owners of these Kodak cameras have reported the exact same problems.
It was only then that I discovered that QuickTime itself can convert MOV files to AVI. Believe it or not, it’s built into the QuickTime Player that Kodak supplies, or that you can download free from apple.com. The problem is that you can’t use it unless you pay Apple to upgrade to QuickTime Pro.
After realising that this would probably be the only way to get decent audio for these clips, I paid the AU$59 to Apple Australia to get the licence key that enables the extra “Pro” menu options in QuickTime.
Sure enough, you can “Export” any MOV file to a number of formats, including AVI. And guess what? The audio comes out fine!
So, the first piece of advice I can give is: pay Apple the US$29 (or whatever amount it is in your country) to upgrade QuickTime to QuickTime Pro.
From here, however, there are still a few snags to untangle.
The first is that the default settings for Exporting to AVI don’t give a great result. It defaults to the Cinepak codec, medium quality. This looks terrible compared to the original QuickTime movie. Even on maximum quality, that codec just doesn’t give good results.
I finally found that the best option is to use the Intel Indeo Video 4.4 codec, set on maximum quality. This creates AVI files that are 10 to 20 times larger than the original MOV files, but the quality is there. If (like me) you only want the AVI files so you can dump them into your Video-CD program, then you want to keep the quality as high as possible in this first step. The extra hard disk space is not really a concern. When your VCD program converts the AVI files to MPEG, it will compress them to the usual VCD size.
Now for the biggest snag: those problem MOV files are still a problem, even for QuickTime Pro. Unbelievably, these Kodak cameras are spitting out MOV files which have some sort of technical flaw in their data specifications. QuickTime is able to play them back fine—and that seems to be all that the Kodak engineers really checked. However, if QuickTime Pro tries to export them, then when the progress bar gets to the end, it never finishes. It just keeps going. If you check the output folder with Explorer, and keep hitting F5 to update the file listing, you can see the file getting bigger, and bigger, and bigger. It never stops.
That this happens even for QuickTime itself (the native format for these files) confirms that the problem is with the software built into these Kodak cameras. It would be nice it they issued a patch or a fix. I couldn’t find one.
Fortunately, there is a “workaround” for this problem. I found it when trolling the net trying to find solutions to all these problems. The workaround is to use QuickTime Pro’s cut and paste facility. Open the problem MOV file, then press Ctrl-A (the standard key combination for “select all”—in this case it selects the entire film clip, as you can see by the grey selection of frames at the bottom of the player). Then hit Ctrl-C (i.e. copy, which in this case copies all the frames, but not the incorrect data structure in the original MOV file). Now hit Ctrl-N (i.e. new, in this case a new MOV file or player). In this new player, press Ctrl-V (i.e. paste). Now you have a new version of the MOV file with the bad data structure exorcised. You can save this under a new name, but make sure you specify “Make movie self-contained”—otherwise, it will simply be a link to the original (bad) MOV file, which you are probably going to delete once you save the exorcised version. (You also cannot overwrite the original file, because it needs to access that to make the “self-contained” movie. You need to give it a slightly different name, save it “self-contained”, then delete the original and rename the new copy back to what you wanted it to be. A pain, I agree, but at least the **** thing works—finally!)
The exorcised MOV file can now be used to Export to AVI format. (I also keep all the MOV files on a separate CD, in case I want to reconvert them to a different format in the future. I figure it’s better keeping the exorcised ones than the haunted ones.)
So I hope that all this answers a few of your questions. No, you weren’t being incredibly stupid.

How to restore a control file without having its backup

Hi,
Can any one please suggest me how to restore a control file without having its backup.
Thanks

To add to what SB said, in years past the instructions for re-creating the control file manually were contained in the DBA Administration manual. It used to be and may still be common to be taking and saving a "backup control file to trace" for this purpose.
If you lost only the primary copy of the control file and it is an OS file then while the database is shutdown you can copy the secondary over the primary and then use if to start the database. If the control file is stored in ASM then there should be a way to perform the copy via ASM.
If you use rman for backups then a copy of the control file should be part of the backup process and you can retrieve it from the backup set then perform recovery using the backup control file though I do note the OP said something to the effect no backup exists. Still, I have knows of instances where the DBA did not realize that the backup set contained the control file and the spfile so I think this is worth mentioning just in case.
HTH -- Mark D Powell --

How can I play mov file on ipad2?

How can I play mov file on ipd2? Anyone? Thanks.

I imported (using Photos app) a .mov file from my Nikon camera. Tap the icon and it played.
 Cheers, Tom

How do you make audio fast without changing pitch?

How do you make audio fast without changing pitch?

PrPro may have that but I've always just gone over to Audition ... you change speed there, you're given a choice of keeping the pitch the same or allow it to change. Note ... if there's much cha ge in speed the result can be odd.
Neil

How do i edit move file in pre elements

I shot in a canon 60d the footage is not supported in pre elements ,how do i edit move file in pre elements

issac
What version of Premiere Elements are you using and on what computer operating system is it running?
When you write "move" file, do you mean "movie" file?
Do you have QuickTime installed on your computer along with Premiere Elements? If not, please do so.
Generalizing because you did not give all the details, I would say that the Canon 60D AVCHD.mov file should be supported by
Premiere Elements as long as you have QuickTime installed on the same computer with Premiere Elements.
Please review and consider and supply more details.
We will be watching for the details.
Thank you.
ATR

How can I transfer .mov files to my iPad?

How can I transfer .mov files to my iPad?

If it's on a SD card in your camera, you cau use the camera connection kit, either by connecting the camera or inserting the SD card.
If it's on your computer, you can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
 Cheers, Tom

MAC OSX 10.3.6 having Boot Problems(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!

Hi Frnds,Small Favour for me,...
MAC OSX 10.3.6 having Boot Problem(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!, Windows 7 is working perfectly , can i restore any files in MAC OSX 10.3.6 through Windows 7, or i need the MAC OSX 10.3.6 Bootable Files i need to enter the MAC OSX....

Hi Frnds,Small Favour for me,...
MAC OSX 10.3.6 having Boot Problem(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!, Windows 7 is working perfectly , can i restore any files in MAC OSX 10.3.6 through Windows 7, or i need the MAC OSX 10.3.6 Bootable Files i need to enter the MAC OSX....

Everything on all the webpages are so small, and only take up half the screen. How can I make it bigger, without changing the settings on my computer and by that change the size of everything on my computer.

Everything on all the webpages are so small, and only take up half the screen. How can I make it bigger, without changing the settings on my computer and by that change the size of everything on my computer.

The Firefox [https://support.mozilla.com/en-US/kb/Page+Zoom Page Zoom] feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox, as with some other browsers.
Try the Default FullZoom Level extension: 
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: 
https://addons.mozilla.org/en-US/firefox/addon/2592/

How to open a .MOV file with Maverick?

Hello,
I recorded some videos with my iPhone 4S. i sync it then with my computer, but it says that it can not open them. Why? How can i open .MOV files with my computer (running with Maverick 10.9.4) ?

Try VLC.
Video Player - VLC
More.
Video Player - Divx
Video Player – Flip4Mac

How to add a .mov file to i tunes

how to add a .mov file to i tunes

Export to master file. Use H.264 and in the When Done selection pick iTunes library or whatever.

How can copy or move files by my AI plugin in Leopard??

How can copy or move files by my AI plugin in Leopard??
Thanks!
hanyang

You can use "execve". This example will copy /tmp/file1 to /tmp/file2 #include <stdio.h> #include <sys/types.h> #include <unistd.h> pid_t forkPid; char *childargs[] = { "cp", "/tmp/file1", "/tmp/file2", 0 }; if( ( forkPid = fork() ) == 0 ) { execve( "/bin/cp", childargs, NULL ); } else if( forkPid > 0 ) { printf( "Success!" ); } else { printf( "Can't fork" ); } For more information, man execve.

How do I quickly move files from old iMac to new one?

how do I quickly move files from old iMac to a new one?

How many files, and what total size?
To move ALL your files from an old Mac, you would use Migration Assistant, using either an Ethernet or Firewire connection. It's not quick, though.
To move just a few, you COULD put the old Mac into target mode (reboot it while holding T, and connect a Firewire cable, with Thunderbolt adaptor on the new end if need be). Or you could just copy them via an external (probably USB, for compatibility) drive or flash drive, formatted Mac Extended.
Matt

How do I crop .mov file without changing aspect

Similar Messages

Maybe you are looking for