How do I delete "You can't open the application Adobe Reader Updater Helper because PowerPC..."

How do I delete "You can't open the application Adobe Reader Updater Helper because PowerPC applications are no longer supported." I have Mac w/ Lion and this message pops-up constantly. I would like to stop it from poping up? Any suggestions?

Adobe Creative Suite 2 (CS2)'s Photoshop running in Snow Leopard Server installed into Parallels 8 for use in Lion or Mt. Lion:
                              [click on image to enlarge]
Apple is now selling Snow Leopard Server for $19.99 + sales tax & shipping costs at 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only).  Smarmy, self-important forum members will have to pay extra!

Similar Messages

  • You can't open the application "Adobe Illustrator CS2.app" because PowerPC applications are no longer supported.

    You can’t open the application “Adobe Illustrator CS2.app” because PowerPC applications are no longer supported.
    what can I do?

    Adobe Creative Suite 2 (CS2)'s Photoshop running in Snow Leopard Server installed into Parallels 8 for use in Lion or Mt. Lion:
                                  [click on image to enlarge]
    Apple is now selling Snow Leopard Server for $19.99 + sales tax & shipping costs at 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only).  Smarmy, self-important forum members will have to pay extra!

  • You can't open the application "Warcraft III (OS X)" because PowerPC applications are no longer supported.

    Have recently purchased the Warcraft III Reign of Chaos Battle Chest though ahave been unable to install this on my Mac Mini.  I get the following error message when attempting to run the executable from the DVD:
    "You can’t open the application “Warcraft III (OS X)” because PowerPC applications are no longer supported."
    I am running what I believe to be the latest Mac OS 10.9.1.  Please can anyone point me in the right direction for how to successfully install and run these games?
    Many thanks in advance,

    Get older hardware that can run 10.6 or lower and the software will run.
    What was the original version of OS X that shipped with your iMac?
    Allan

  • I just installed Photoshop Elements that is supposed to be for Mac. The message appeared that said, ""You can't open the application Photoshop Elements 2.0 because PowerPC applications are no longer supported." I have a Mac OS X, Version 10.8.5,

    I just installed Photoshop Elements that is supposed to be for Mac. The message appeared that said, ""You can't open the application Photoshop Elements 2.0 because PowerPC applications are no longer supported." I have a Mac OS X, Version 10.8.5,

    Have a look here:
    https://www.google.com/search?q=%22You+can%27t+open+the+application+Photoshop+Elements+2.0 +because+PowerPC+applications+…

  • You can't open the application Adobe Flash CS4.app because it may be damaged or incomplete.

    Can someone help me with that one ? When I am trying to run Flash after install I get this error message:
    You can't open the application Adobe Flash CS4.app because it may be damaged or incomplete.
    Mac OS 10.6.5
      Model Name:    Mac Pro
      Model Identifier:    MacPro3,1
      Processor Name:    Quad-Core Intel Xeon
      Processor Speed:    2.8 GHz
      Number Of Processors:    2
      Total Number Of Cores:    8
      L2 Cache (per processor):    12 MB
      Memory:    4 GB
      Bus Speed:    1.6 GHz
    I tried to uninstall and reinstall, same error. I couldn't launch under Leopard (10.5.x) either.
    Thanks
    Eric

    Here’s some updates.
    I can not uninstall Flash (CS4) using "Adobe Creative Suite 4 Design Premium". It looks like Flash is not installed.
    If I try to install it using the disk, it looks like Flash is not installed at all. So I go thrue the installation process, and follow the instructions, until it’s complete.
    But if I go in my App folder, and look in the Adobe Flash CS4 folder the Flash.app icon has a circle with a bar in it. This is when I get the message.

  • You can't open the application "Adobe InDesign CC 2014" because it is not responding.

    For some reason InDesign has decided to stop responding. Acts like it wants to launch but then does nothing. When I try to launch it from the Finder rather than the Dock, I receive this message:
    You can’t open the application “Adobe InDesign CC 2014” because it is not responding.
    Please advise.

    Wild guess here, but the installers are known to fail to set the correct permissions on the preference folders. See Cant launch new inDesign CC | Adobe Community  and substitute Version 10 where you see Version 9.

  • How I can fix the following "You can't open the application "Dell Laser MFP Installer" because PowerPC applications are no longer supported."

    Please help me to recovery "powerPC aplication are no longer supported" on my pc just to add a printers

    You will need to go to the Dell site and get the latest software for the printer.
    As the message states PowerPc apps are not supported in Mavericks. They haven't been supported since Lion. The last OS to be able to run them was Snow Leopard.

  • You can't open the application "About HP Scanner Software" because PowerPC applications are no longer supported.

    I just upgraded my Mac from 10.5.8 to 10.8.2 and now having problems with connecting the scan option on my HP 6500 all-in-one wireless printer. Tried uninstalling followed by downloading from the apple site. It will scan using the scan utility but not otherwise. Anyone have a similar problem?

    Correct Rosetta, which allowed running PPC Apps on IntelMacs, was dropped after 10.6.8
    Not sure if there are Intel drivers, did you check hp's site?

  • You can't open the application "MP Navigator 2.2" because PowerPC applications are no longer supported.

    Yesterday I was printing away but today my iMac sends that message when I try to use the Canon MP 530 printer/scanner. What should I do?

    Run Software Update and see if there are more up-to-date drivers available for your device. If there are not then you will need to navigate to Canon's website and see if they have drivers available for your printer that support Lion and Mountain Lion.

  • You can't open the application Adobe Photoshop CS5 because it may be damaged or incomplete

    Hi all,
    I have installed Adobe cs5 and all the other programs (indesign etc etc) work but when I try to open photoshop it says:
    "You can't open the application Adobe Photoshop CS5.app because it may be damaged or incomplete"
    I am a noob, I first installed it but it was in polish, couldn't work out how to change the language but entered into the program without problems so I deleted, redownloaded and reinstalled and it said the above. I deleted, redownloaded and reinstalled again but it didn't help.
    What else can I do? again, I am a noob to all of this (and Macs) so Idiots Guide to Fixing your Photoshop CS5" Would be fantastic!!
    Many thanks
    Chelsea

    Chelsea,
    Your big (as in HUGE) mistake was in deleting the application instead of using the Adobe uninstaller.
    Look for the CS5Clean script at the Adobe site, download it and run it according to the instrructions.
    Good luck.
    Wo Tai Lao Le
    我太老了

  • You can't open the application "Adobe InDesign CS4" because it is not supported on this architecture"

    A day or two ago I went through installing Adobe InDesign CS4 on Leopard OS X.5.8.  After what appears to be a successful installati
    on, in launching InDesign CS4 the message " You can't open the application "Adobe InDesign CS4" because it is not supported on this
    architecture" comes up".  Calling in to support and speaking with the agent who read through previous posts, suggested to me that I
    should try the same fix that has been suggested when I ran across an error when installing Adobe InDesign CS4 on another separate ha
    rd drive externally connected to this computer running Snow Leopard OS X.6.1 for the error reading: "Damaged &/or incomplete install
    ation" when launching afterwards.  The support technician told me to first delete with the uninstall Adobe InDesign CS4, InDesign.
    Following this I am told to run the CS4 Cleanup Utility.  I restart the computer each and every time after running each of the utili
    ties.  Now I am told to install InDesign as a trial version from the DVD and after installation to go ahead & enter the serial numbe
    r.  When launching InDesign CS4 after installation got back the same error as before: "You can't open the application "Adobe InDesig
    n CS4" because it is not supported on this architecture" comes up".  Followed KB404711 article and no success.  What else can be don
    e to fix this issue?
    This morning contacted Adobe Support regarding this response:
    After having a detailed reserach on your issue i acme to the conclusion
    that the problem you are having is not related to Adobe software but its
    in fact related to your MAC version ( OSX-5.8). While reseraching your
    issue i came across
    to many forums where a lot of postings were about the similar error but
    with different products the only comon thing was all the Errors were
    with Mac machine , also when you check the system requirements  for
    Adobe Indesign Cs4
    by going to the following link
    http://www.adobe.com/products/indesign/systemreqs/?promoid=DRHXE  you
    will find the Mac OS version supported are from Mac OS X
    v10.4.11–10.5.4. but we do support Snow Leoprad , so i would like
    to advise to you to either contact your system manufacturer or upgrade
    to Snow Leopard ( mac os x 10.6)
    I have been told that my case is being sent to Level 2 agents and that it can take 24-48 hours for a response.  In the meantime I decided to see what the Support Forums can do for me.  Until then I am down.  Thanks for the help.

    In the application folder there is a folder 'Adobe InDesign CS4' within which there is just the application file. I would expect there should be more file there??
    I've un-installed and installed again - still the same.
    Even downloaded the dmg again and done thwe whole thing over again.

  • Can't open the application "Adobe Illustrator CS6.app" because it is not supported...

    UPDATE - Ahhh haaaa!  If I log in with the guest account Illustrator works fine! WTF!? Oh well, at least I have a direction to be working towards, thanks for all the suggestions and assistance Adobe Community!
    That was sarcasm by the way...
    UPDATE - Just installed the latest Illustrator update from Adobe - still not loading. Tried reseting the iMac's PRAM, no luck.
    UPDATE - I've just reinstalled the whole CS6 Suite, and the only things that have changed are that I now have a little white no entry sign over Illustrator (it still won't load) and I also have 1.5GB of application updates to do
    I don't have any direct evidence but I'm guessing this is a Mavericks incompatibility judging by the other issues people are having with Illustrator. Any suggestions are welcome!
    I've been using CS6 on my iMac for the past year (3.2GHz Intel Core i5, 32GB ram).  Everything running fine, no problems.
    Then I get the popup from Apple saying to upgrade to Mavericks, so I did. After updating my Java version, for the next two weeks everything carried on running fine. Until just now.
    I finished working on an Illustrator file, saved it and then exited, only to remember I needed to make one more small change. So I clicked on the AI icon and got this error message;
    'You can’t open the application “Adobe Illustrator CS6.app” because it is not supported on this type of Mac.' Eh???
    I tried doing a reboot thinking that maybe something had just gone wonkey and needed resetting. Still no luck. So I reinstalled Java again. Nope. Then I tried every other CS6 app and they all ran fine.
    Does anyone know what could cause Illustrator CS6 to be working fine for weeks and then suddenly become an unsupported app? These things always happen with you're right up against a deadline! I NEED ILLUSTRATOR WORKING NOW! HEEEEEELLLLLLLPPPP!
    James

    I had the same issue and resolved it
    I first remove the prefs folder and the plist files for illustrator in ~/Libary
    next I logged off,
    then I uninstalled illustrator using the adobe uninstaller(http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html)
    Next I reinstall illstrator
    after that it worked for me.

  • I installed Lion 10.7.4.  Went to use Photoshop Cs and got a popup window.  You can't open the application Adobe Photoshop CS because PowerPC applications are no longer supported.    Is there a way of getting this to work or do I have to get the all new!

    I installed Lion 10.7.4.     Went to use Photoshop Cs and got a popup window.  You can't open the application Adobe Photoshop CS because PowerPC applications are no longer supported.    Is there a way of getting this to work or do I have to get newest version of all of my Power PC apps?

    Welcome to Apple Communities
    PowerPC applications are unsupported in newer versions. You can upgrade Photoshop or you can install Snow Leopard in a partition.
    1. Open Disk Utility (Applications > Utilities) and select your drive
    2. Go to Partitions tab, press + button, create a new partition and press Apply
    3. Insert the Snow Leopard install DVD and reboot pressing C key
    4. Install it in the new partition
    5. If you want to change boot, go to System Preferences > Startup Disk and select 10.7

  • I am trying to install Final cut pro studio V1.0.1 (2005) on OS X lion. I get a message "You can't open the application final cut studio.mpkg because power pc application are no longer supported

    I am trying to install Final cut pro 5 studio V1.0.1 (2005) on OS X lion. I get a message "You can't open the application final cut studio.mpkg because power pc application are no longer supported. My computer is New. Is their a link I can go to get tech support?

    You won't find any help at tech support ... other than telling you the facts: Intel processor Macs require FCP 5.1 or higher.  FCP 5.0 and earlier were written for PowerPC processor Macs, long before Apple switched to using Intel processors.
    And then there's the issue of the OS.  OS 7 will allow FCP 7 (and sometimes even FCP 6) to work OK, but versions earlier than that have spotty operation on Lion.
    Here's a brief history of full FCP versions and recommended OS compatibility:
    * = requires PPC             ** = works with both PPC and Intel                          *** = require Intel
    FCP 1.0*       OS 9
    FCP 2.0*       OS 9
    FCP 3.0*       OS 9, OS 10.1, OS 10.2
    FCP 4.0*       OS 10.2, 10.3
    FCP 4.5*       OS 10.3
    FCP 5.0*       OS 10.3 (OS 10.4?)
    FCP 5.1**     OS 10.4, 10.5
    FCP 6.0**     OS 10.4, 10.5, 10.6 (OS 10.7?)
    FCP 7.0***    OS 10.6, OS 10.7
    FCP-X***       OS 10.6, OS 10.7
    Essentially, you have a newer Intel processor Mac with a new OS and very old, incompatible software.   You might be able to find a used version of Final Cut Studio 3 on sites like ebay or craigslist as it is no longer offered by Apple as an upgrade.
    Alternatively, you could purchase and download FCP-X, but it is an entirely different application, sharing virtually nothing with previous versions of FCP.
    -DH

  • I'm trying to install CS2 on a mac OS X 10.9.4 but get a message "You can't open the application Adobe Installer because PowerPC applications are no longer supported.

    I'm trying to install CS2 on a mac OS X version 10.9.4. When I try to open the installer file I get a message "You can't open the application Adobe Installer because PowerPC applications are no longer supported. Does anyone know what I should do?

    It means what it says - it's not compatible with modern Macs. You need to buy a current version.
    Mylenium

Maybe you are looking for

  • Time Out error problem when i run the report for the whole plant

    Dear all, pls find the below coding, when i execute this report for the whole plant , it gives me time out error since it has to process huge database. pls suggest me in which part of my below coding i can improvise or any other better way to fetch t

  • Query on Mitigation Control

    Hi all, We have configured Mitigation Controls and mitigated some of the users. We have the following queries in this regard: a) When we run the SoD anlaysis for that particular user we could able to see only half description of the Mitigation Contro

  • Play two MCs with one button

    Hi, I'm trying to make the main timeline go to frame 2, and a separate MC go to frame 2 by clicking one button. Here's what I'm trying ... on (release) {     _root.gotoAndPlay(2);     snap1.gotoandplay(2); When the button is clicked, the main timelin

  • My external harddrive (g-drive) is not showing up

    My hardrive is not showing up on my macbook anymore and is not found is disk utility either. It is on becuase th light is on when it is connected.  The files on it are also really important. Any help would be geatly appreciated.

  • Multipage PDF with SWF files

    I'm creatinging a multipage PDF document that has mulitple swf files embedded in it.  For example on Page 1 I'm showing a DataGrid and the user has the option to change the datagrid to a columnchart, with the same type of stuff on page 2.  When you g