How do I determine the execution bottleneck?

I have a four camera inspection system that I need to run faster. I want to find the bottleneck and look for ways to rearrange the processing work. In Vision Assistant there's a profile tool that tells me how quickly each vi executes. Is it possible to implement something similar on a fairly complex program?

What environment are you in? If you're in LabVIEW, you can use the LabVIEW performance tools available in:
Tools --> Profile
There are four different tools in there - one of them is "Performance and Memory"
If you're working in Vision Builder AI (VBAI), then you should check out the VBAI help topic "Benchmarking Inspection Performance". The benchmarking tool described in that help topic is available in "Operate --> Benchmark Inspection"
Colden

Similar Messages

How do I determine the execution entry point used programatically in a sequence?

I need to vary the behaviour (slightly) of a sequence depending on whether the user runs the sequence with the "Test UUTs" execution entry point or with "Single Pass". I was hoping that I could find a variable to use in my sequence which specifies which entry point was used. Is there a variable that shows this information? If so, what is it? If not, what other methods might work to accomplish this?
Thanks,
Sean

Hi,
In your MainSequence use the expression Locals.Caller = NameOf(RunState.Caller.RunState.Sequence).
(Locals.Caller declared as a string in the sequence.)
This will return a string to your variable as "Single Pass" or "Test UUTs".
Hope this helps
Regards
Ray
Regards
Ray Farmer

How can I make the execution of my script faster

Hi everyone
How can I make the execution of my script faster, because it takes a lot of time to execute? The following is my script:
DECLARE
CURSOR C1 IS
SELECT A.ITEM_CODE,A.STORE_CODE,ST_UNIT,SA_UNIT,CART_QTY,QUANTITY_ON_HAND
FROM PROJ.IM_LOCATION A
WHERE A.ITEM_CODE BETWEEN :ITEM_FRM AND :ITEM_TO
AND A.STORE_CODE = :FRM_STORE
ORDER BY
A.STORE_CODE ;
CURSOR C2 IS
SELECT A.ITEM_CODE,A.STORE_CODE,ST_UNIT,SA_UNIT,CART_QTY,QUANTITY_ON_HAND
FROM PROJ.IM_LOCATION A
WHERE A.ITEM_CODE BETWEEN :ITEM_FRM AND :ITEM_TO
AND A.STORE_CODE = :FRM_STORE
ORDER BY
A.STORE_CODE ;
big_syb_qty_issue number(12,3);
small_syb_qty_issue number(12,3);
big_issue number(12,3);
small_issue number(12,3);
item_syb_code varchar2(30);
big_syb_qty_rec number(12,3);
small_syb_qty_rec number(12,3);
BI_SUPP_REC number(12,3);
SM_SUPP_REC number(12,3);
big_syb_qty_ADJ number(12,3);
small_syb_qty_ADJ number(12,3);
big_ADJ number(12,3);
small_ADJ number(12,3);
big_syb_qty_rec_iner number(12,3);
small_syb_qty_rec_iner number(12,3);
BI_INTER number(12,3);
SM_INTER number(12,3);
cl_big_qty number(12,3);
cl_small_qty number(12,3);
cl_big_qty1 number(12,3);
cl_small_qty1 number(12,3);
BIG_QTY_OPEN number(12,3);
SMALL_QTY_OPEN number(12,3);
BEGIN
     IF ((:FRM_STORE IS NULL) OR (:ITEM_FRM IS NULL) OR (:ITEM_TO IS NULL) OR (:DATE_FRM IS NULL)) THEN
          SHOW_MESSAGE('You Should Enter the Parameters Values Correctly Please try again !!!! ');
          RAISE FORM_TRIGGER_FAILURE;
          GO_FIELD('DATE_FRM');
     END IF;
DELETE FROM STOCK_AT_DATE_REP2;
COMMIT;
cl_big_qty := 0;
cl_small_qty := 0;
-- MESSAGE('Please Wait The System Calculating The Transactions !!!');
SET_APPLICATION_PROPERTY(CURSOR_STYLE,'BUSY');
FOR R IN C1
LOOP
cl_big_qty := R.CART_QTY ;
cl_small_qty := R.QUANTITY_ON_HAND;
-- Transerfer Data 1
BEGIN
SELECT B.ITEM_CODE,SUM(NVL(CART_QTY,0)) ,SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,big_syb_qty_issue,small_syb_qty_issue
FROM IM_TRANS_ISSUE_HEADER A,IM_TRANS_ISSUE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.DEL_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE > :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('ISSUED BIG'||' '||big_syb_qty_issue);
exception
when no_data_found then big_syb_qty_issue := 0;
small_syb_qty_issue := 0;
when others then MESSAGE(10,sqlerrm);
END ;
-- Goods Received Data From Supplier 1
BEGIN
SELECT B.ITEM_CODE,SUM(B.CART_QTY),SUM(ITEM_QUANTITY)
INTO item_syb_code,big_syb_qty_rec,small_syb_qty_rec
FROM IM_GOODS_RECIEVE_HEADER A,IM_GOODS_RECIEVE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND STORE_CODE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE > :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('RECEIVED FROM SUPPLIER BIG'||' '||big_syb_qty_rec);
exception
when no_data_found then big_syb_qty_rec := 0;
small_syb_qty_rec := 0;
when others then message(10,sqlerrm);
END ;
-- Adjustement Data 1
BEGIN
SELECT B.ITEM_CODE ,SUM(NVL(CART_QTY,0)) ADJUST_QTY,SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,big_syb_qty_ADJ,small_syb_qty_ADJ
FROM IM_ADJUST_HEADER A,IM_ADJUST_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.STORE_CODE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND A.DOC_DATE > :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('Adjust BIG'||' '||big_syb_qty_ADJ);
exception
when no_data_found then big_syb_qty_ADJ := 0;
small_syb_qty_ADJ := 0;
when others then message(10,sqlerrm);
END ;
-- Goods Received Data From Stores 1
BEGIN
SELECT B.ITEM_CODE,SUM(B.CART_QTY),SUM(ITEM_QUANTITY)
INTO item_syb_code,big_syb_qty_rec_iner,small_syb_qty_rec_iner
FROM IM_TRANS_REC_HEADER A,IM_TRANS_REC_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND REC_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE > :DATE_TO
GROUP BY
B.ITEM_CODE;
-- show_message('here');
-- SHOW_MESSAGE('Received From Stores BIG'||' '||big_syb_qty_rec_iner);
exception
when no_data_found then
big_syb_qty_rec_iner := 0;
small_syb_qty_rec_iner := 0;
when others then message(10,sqlerrm);
END ;
cl_big_qty := (NVL(cl_big_qty,0) + NVL(big_syb_qty_issue,0));
cl_big_qty := (NVL(cl_big_qty,0) - NVL(big_syb_qty_rec,0));
cl_big_qty := (NVL(cl_big_qty,0) - NVL(big_syb_qty_rec_iner,0));
big_syb_qty_ADJ := -1 * NVL(big_syb_qty_ADJ,0);
cl_big_qty := (NVL(cl_big_qty,0) + NVL(big_syb_qty_ADJ,0));
-- srw.message(2000,'cl_small_qty'||cl_small_qty);
cl_small_qty := (NVL(cl_small_qty,0) + NVL(small_syb_qty_issue,0));
cl_small_qty := (NVL(cl_small_qty,0) - NVL(small_syb_qty_rec,0));
cl_small_qty := (NVL(cl_small_qty,0) - NVL(small_syb_qty_rec_iner,0));
small_syb_qty_ADJ := -1 * NVL(small_syb_qty_ADJ,0);
cl_small_qty := (NVL(cl_small_qty,0) + NVL(small_syb_qty_ADJ,0));
-- srw.message(2000,'cl_small_qty'||cl_small_qty); srw.message(2000,'cl_small_qty'||cl_small_qty);
INSERT INTO STOCK_AT_DATE_REP2
VALUES(R.STORE_CODE,R.ITEM_CODE,cl_big_qty,cl_small_qty,R.ST_UNIT,R.SA_UNIT,:DATE_FRM,
:DATE_TO,0,0,0,0,0,0,0,0,cl_big_qty,cl_small_qty);
cl_big_qty := 0;
cl_small_qty := 0;
END LOOP;
COMMIT;
FOR R IN C2
LOOP
-- Transerfer Data 2
BEGIN
SELECT B.ITEM_CODE,SUM(NVL(CART_QTY,0)) ,SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,big_issue,small_issue
FROM IM_TRANS_ISSUE_HEADER A,IM_TRANS_ISSUE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.DEL_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE BETWEEN :DATE_FRM AND :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('ISSUED BIG'||' '||big_syb_qty_issue);
exception
when no_data_found then
big_issue := 0;
small_issue := 0;
when others then MESSAGE(10,sqlerrm);
END ;
-- Goods Received Data From Supplier 2
BEGIN
SELECT B.ITEM_CODE,SUM(NVL(B.CART_QTY,0)),SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,BI_SUPP_REC,SM_SUPP_REC
FROM IM_GOODS_RECIEVE_HEADER A,IM_GOODS_RECIEVE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND STORE_CODE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE BETWEEN :DATE_FRM AND :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('1- SM_SUPP_REC '||' '||SM_SUPP_REC );
-- SHOW_MESSAGE('RECEIVED FROM SUPPLIER BIG'||' '||big_syb_qty_rec);
exception
when no_data_found then
BI_SUPP_REC := 0;
SM_SUPP_REC := 0;
when others then message(10,sqlerrm);
END ;
-- Adjustement Data 2
BEGIN
SELECT B.ITEM_CODE ,SUM(NVL(CART_QTY,0)) ADJUST_QTY,SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,big_ADJ,small_ADJ
FROM IM_ADJUST_HEADER A,IM_ADJUST_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.STORE_CODE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND A.DOC_DATE BETWEEN :DATE_FRM AND :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('Adjust BIG'||' '||big_syb_qty_ADJ);
exception
when no_data_found then
big_ADJ := 0;
small_ADJ := 0;
when others then message(10,sqlerrm);
END ;
-- Goods Received Data From Stores 2
BEGIN
SELECT B.ITEM_CODE,SUM(NVL(B.CART_QTY,0)),SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,BI_INTER,SM_INTER
FROM IM_TRANS_REC_HEADER A,IM_TRANS_REC_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND REC_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE BETWEEN :DATE_FRM AND :DATE_TO
GROUP BY
B.ITEM_CODE;
-- show_message('here');
-- SHOW_MESSAGE('Received From Stores BIG'||' '||big_syb_qty_rec_iner);
exception
when no_data_found then
BI_INTER := 0;
SM_INTER := 0;
when others then message(10,sqlerrm);
END ;
BEGIN
     BIG_QTY_OPEN := 0;
SMALL_QTY_OPEN := 0;
BEGIN
SELECT NVL(S_BIG_QTY_OPEN,0) ,NVL(S_SMALL_QTY_OPEN,0)
INTO
BIG_QTY_OPEN,SMALL_QTY_OPEN
FROM STOCK_AT_DATE_REP2
WHERE S_STORE_CODE = R.STORE_CODE
AND S_ITEM_CODE = R.ITEM_CODE;
END;
BIG_QTY_OPEN := ((BIG_QTY_OPEN) + NVL(big_issue,0));
BIG_QTY_OPEN := ((BIG_QTY_OPEN) - NVL(BI_SUPP_REC,0));
big_adj := -1 * NVL(big_adj,0);
BIG_QTY_OPEN := ((BIG_QTY_OPEN) + NVL(big_adj,0));
BIG_QTY_OPEN := ((BIG_QTY_OPEN) - NVL(BI_INTER,0));
SMALL_QTY_OPEN := ((SMALL_QTY_OPEN) + NVL(SMALL_issue,0));
SMALL_QTY_OPEN := ((SMALL_QTY_OPEN) - NVL(SM_SUPP_REC ,0));
SMALL_adj := -1 * NVL(SMALL_adj,0);
SMALL_QTY_OPEN := ((SMALL_QTY_OPEN) + NVL(SMALL_adj,0));
SMALL_QTY_OPEN := ((SMALL_QTY_OPEN) - NVL(SM_INTER,0));
END;
BEGIN
UPDATE STOCK_AT_DATE_REP2
SET BIG_SUP_REC = BI_SUPP_REC,
SMALL_SUP_REC = SM_SUPP_REC,
BIG_ISSUE_TRAN = big_issue,
SMALL_ISSUE_TRAN = SMALL_issue,
BIG_ADJUST = big_adj,
SMALL_ADJUST = SMALL_adj,
BIG_INTER_REC = BI_INTER,
SMALL_INTER_REC = SM_INTER,
S_BIG_QTY_OPEN = BIG_QTY_OPEN,
S_SMALL_QTY_OPEN = SMALL_QTY_OPEN
WHERE S_STORE_CODE = R.STORE_CODE
AND S_ITEM_CODE = R.ITEM_CODE;
exception
when no_data_found then
NULL;
when others then
message(10,sqlerrm);
END;
END LOOP;
COMMIT;
SET_APPLICATION_PROPERTY(CURSOR_STYLE,'default');
SYNCHRONIZE;
-- SHOW_MESSAGE('The Data Have Been Calculated !!!');
END;
declare
     pl_id ParamList;
APPLICATION_ID VARCHAR2(20):='PRD';
          COMMAND_LINE VARCHAR2(100) :='STOCK_LEDGER';
BEGIN
pl_id := Get_Parameter_List('tmpdata');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
pl_id := Create_Parameter_List('tmpdata');
Add_Parameter(pl_id,'DATE_FRM',TEXT_PARAMETER,:DATE_FRM);
Add_Parameter(pl_id,'DATE_TO',TEXT_PARAMETER,:DATE_TO);
Add_Parameter(pl_id,'ITEM_FRM',TEXT_PARAMETER,:ITEM_FRM);
Add_Parameter(pl_id,'ITEM_TO',TEXT_PARAMETER,:ITEM_TO);
Add_Parameter(pl_id,'FRM_STORE',TEXT_PARAMETER,:FRM_STORE);
IF :REPORT_TYPE = 1 THEN
Run_Product(REPORTS,'C:\INV\RDF\STOCK_LEDGER.rdf',SYNCHRONOUS,RUNTIME,
FILESYSTEM, pl_id,NULL);
ELSIF :REPORT_TYPE = 2 THEN
Run_Product(REPORTS,'C:\INV\RDF\STOCK_LEDGER_2.rdf',SYNCHRONOUS,RUNTIME,
FILESYSTEM, pl_id,NULL);
END IF;
END;
Waiting for your valuable answer
Best Regards
Jamil Alshaibani

Make a matte in Photoshop.
From the Photoshop menu bar: File > New > Film & Video Presets. Choose one that suits your FCP project pixel dimensions. Make the background black. Place a white rectangle with rounded corners on top (the white will determine how much of your picture is visible). Flatten Image. Save as TIFF. Import into FCP.
Move your video clips up to V2. Place the imported TIFF on V1. Highlight all clips on V2.
Go to Modify > Composite Mode > Travel Matte Luma. Done.
If you want soft edges, no need for a matte. Double click your clip to place it in the Viewer. Open up the Motion tab > Crop > Edge Feather. Nice and quick. Copy and Paste attributes for the other clips.

To Determine the Execution Time of a PL/SQL Block

Hi
I need to determine the total execution time taken by a PL/SQL code (Anonymous Block , Functions etc).
Can anyone please let me know how can I determine the same?
Regards
Kapil.
Edited by: KapilK on Mar 2, 2009 11:00 AM

Kapil,
When you launching your block using sql script or just typing the entire thing
SQL> set timi on;
SQL> BEGIN
2 MYPROC;
3 COMMIT;
4 END;
5 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.64Regards

OSB: how to figure out the execution time of OSB proxy

Trying to figure out how to determine the execution time taken for any given OSB proxy. Seems like the OSB built-in alerting facilities can display the average response time of all calls to a proxy but not individually. Is there a way to dig this out from the monitoring data being collected?

Service monitoring which comes OOTB is supposed to be aggregated because in usual scenarios you dont need to see the processing time of a specific request. From a performance monitoring perspective the useful data usually is average processing time and minimum or maximum processing time for any request within the aggregation interval which is provided by OSB OOTB.
Now, in some cases the business might want to track each request individually. So, for example they can track how long did it take to process a specific order. OSB does not provide this feature OOTB. There are multiple ways to get this implemented. Two of the most common ways are:
1. Add a start and end time capturing in Proxy Services. You can use logging/reporting/publish to a DB etc to achieve this. But this is indeed intrusive and you will need to do this for every Proxy which needs to be monitored at every instance level. This is also a slight overhead in processing in itself.
2. Use monitoring products which can monitor the WS invocations externally. This will mean more investment but definitely a much better solution. You can consider using different products from Oracle and other vendors based on your requirements, features of products and costs. A few examples are OWSM, Oracle EM, CA Wily etc.

How can I determine the type of video out connector I need?

Howdy,
I have a white macbook purchased Jun/2008. I want to connect to a TV but don't know what adapter I need. How can I determine the type of video out jack my macbook has?
System Profiler says the model identifier is "MacBook 4,1". Under Graphics/Displays the only thing it says about the "Display Connector" is that no display is connected. Too bad it doesn't tell me what type of connector it is. If I knew the name of the connector I'd probably be home free. But it seems like every macbook model has a different video connector (since the state of the art has advanced over the years) and I haven't been able to keep up with the names.
Now, I have a 6" long adapter that will convert this connector to VGA. And searching the Apple store for VGA adapters, the existence of mine says my connector is might be one of "Mini DisplayPort", "Apple Mini DVI", "Apple DVI", or "Apple Micro-DVI". But then there is also the connector at
http://store.apple.com/us/product/M8639G/A?mco=MTY3ODQ5OTY
and that looks like the one I have. But unlike the other adapters, this one is just called a "VGA Display Adapter". Does the connector have a name? How can I find adapters that have that same connector?
I know I could use the adapter I have, plus a VGA to VGA cable, to hook up to a TV. But the quality of the VGA signal is poor in the digital world. My goal is to hook up to the TV via HDMI. Is this even possible? By which I mean, will my macbook generate the signals necessary to be able to be converted to HDMI?
Thanks for any help,
Zebulon T

Thanks, Ded,
You're right, the cable that I have won't work. I't from my previous, 2004 iBook. This is pretty embarrassing... I looked at the cable but didn't bother to try plugging it in.
Looking at the close-up picture of the Mini-DVI to VGA adapter, that does look like the right connector. So I have Mini-DVI, and the other apter you pointed to can convert this to DVI. I'll take a look to see what makes the most sense, connector wise, downstream from that.
Thanks very much.
Zeb T

How Can I Determine the Size of the 'My Documents' Folder for every user on a local machine using VBScript?

Hello,
I am at my wits end into this. Either I am doing it the wrong way or it is not possible.
Let me explain. I need a vb script for the following scenario:
1. The script is to run on multiple Windows 7 machines (32-Bit & 64-Bit alike).
2. These are shared workstation i.e. different users login to these machines from time to time.
3. The objective of this script is to traverse through each User Profile folder and get the size of the 'My Documents' folder within each User Profile folder. This information is to be written to a
.CSV file located at C:\Temp directory on the machine.
4. This script would be pushed to all workstations from SCCM. It would be configured to execute with
System Rights
I tried the script detailed at:
http://blogs.technet.com/b/heyscriptingguy/archive/2005/03/31/how-can-i-determine-the-size-of-the-my-documents-folder.aspx
Const MY_DOCUMENTS = &H5&
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objShell = CreateObject("Shell.Application")
Set objFolder = objShell.Namespace(MY_DOCUMENTS)
Set objFolderItem = objFolder.Self
strPath = objFolderItem.Path
Set objFolder = objFSO.GetFolder(strPath)
Wscript.Echo objFolder.Size
The Wscript.Echo objFolder.Size command in the script at the above mentioned link returned the value as
'0' (zero) for the current logged on user. Although the actual size was like 30 MB or so.
I then tried the script at:
http://www.experts-exchange.com/Programming/Languages/Visual_Basic/VB_Script/Q_27869829.html
This script returns the correct value but only for the current logged-on user.
Const blnShowErrors = False
' Set up filesystem object for usage
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objShell = CreateObject("WScript.Shell")
' Display desired folder sizes
Wscript.Echo "MyDocuments : " & FormatSize(FindFiles(objFSO.GetFolder(objShell.SpecialFolders("MyDocuments"))))
' Recursively tally the size of all files under a folder
' Protect against folders or files that are not accessible
Function FindFiles(objFolder)
On Error Resume Next
' List files
For Each objFile In objFolder.Files
On Error Resume Next
If Err.Number <> 0 Then ShowError "FindFiles:01", objFolder.Path
On Error Resume Next
FindFiles = FindFiles + objFile.Size
If Err.Number <> 0 Then ShowError "FindFiles:02", objFile.Path
Next
If Err.Number = 0 Then
' Recursively drill down into subfolder
For Each objSubFolder In objFolder.SubFolders
On Error Resume Next
If Err.Number <> 0 Then ShowError "FindFiles:04", objFolder.Path
FindFiles = FindFiles + FindFiles(objSubFolder)
If Err.Number <> 0 Then ShowError "FindFiles:05", objSubFolder.Path
Next
Else
ShowError "FindFiles:03", objFolder.Path
End If
End Function
' Function to format a number into typical size scales
Function FormatSize(iSize)
aLabel = Array("bytes", "KB", "MB", "GB", "TB")
For i = 0 to 4
If iSize > 1024 Then iSize = iSize / 1024 Else Exit For End If
Next
FormatSize = Round(iSize, 2) & " " & aLabel(i)
End Function
Sub ShowError(strLocation, strMessage)
If blnShowErrors Then
WScript.StdErr.WriteLine "==> ERROR at [" & strLocation & "]"
WScript.StdErr.WriteLine " Number:[" & Err.Number & "], Source:[" & Err.Source & "], Desc:[" & Err.Description & "]"
WScript.StdErr.WriteLine " " & strMessage
Err.Clear
End If
End Sub
The only part pending, is to achieve this for the 'My Documents' folder within each User Profile folder.
Is this possible?
Please help.

Here are a bunch of scripts to get folder size under all circumstances. Take your pick.
https://gallery.technet.microsoft.com/scriptcenter/site/search?query=get%20folder%20size&f%5B0%5D.Value=get%20folder%20size&f%5B0%5D.Type=SearchText&ac=2
¯\_(ツ)_/¯

How can I stop the execution on a JSP page and start it again

Hi
I am making a program that simulates how to manage transactions when accessing a database by using locks. I have run into a problem and I hope someone has the time to help me.
When a user does an update the transaction commits and releases its locks when the program executes
<%stmt.executeUpdate("commit!"); %>
I need to put a break in to stop the program executing this statement, to illustrate the lock is set correctly.
I have tried to put in an alert box but this does not prevent the rest of the java code being executed.
I have tried to use prompt boxes, JavaScript functions, but these functions cannot have any java code in them.
I have tried using the java.swing JOptionPane boxes but this didn?t work either
I have tried to get input from the user but I don?t know how to retrieve this data on the same page. (As far as I know you have to use submit and even refresh the page or retrieve it on the next page).
Does anyone know how I can stop the execution on a JSP page and start it again (on same page)
Mette

I already have another client (Tomcat jsp application) running and it throws a SQLException correctly when I don�t put in a commit=true statement and don't close the database connection.
But the problem is how to get the code above to stop to illustrate I have set this lock.
I have tried to use the JOptionPane but because my program is running in a web browser I cannot use the JOptionPane dialog box.
I have tired using an alert box but it executes the commit statement before the alert box is dispayed. So this does not work
While (i < 2)
if( i==1)
%>alert(�The transactions commits when you press Ok�); <% //what it to stop execution here
else
stmt.executeUpdate(�commit�);
I am not using threads so I cannot use the sleep function.
I am using mysql and have already configured it to detect deadlocks and how long to wait for locks.
Thanks for your help
Mette

How do I determine the # of times a song has been down loaded; 7 is max?

How do I determine the # of times a song has been down loaded? Is 7 max?

Jim, I apprecite your help. Im still lost...not that efficient on computer. Some notes, If burn playlist to disc doesn appear in the menu, it means that the playlist you selected cant be burned to a CD because it contains items that have usage restrictions; if the playist contains itunes store purchases that are not itune plus songs, you can burn the playlsit to a CD up to 7 times; DRM - Digital Rights Management???? Any help is appreciated Thank You

How do you determine the optimal size for Mozilla Firefox?

How do you determine the optimal size for cache in Mozilla
Firefox? I am using Firefox 7.0.1 on a 64-bit Windows 7 Ultimate operating system with 3GB RAM and 300 GB hard drive, but I have other computers running Windows XP. If the answer doesn't apply to all current versions of Firefox on all supported Windows operating systems, please explain the differences. Is there a formula for calculating the best cache size?

I found that the best idea is to let Firefox decide that itself.

How do you determine the firmware version for a laptop docking station?

How do you determine the firmware version of a HP docking station?
Laptop Model: HP 2740p
OS: 64bit Windows 7
Expansion Base: 2740 Ultra Slim Expansion Base WA995AA#ABA
Thank you for any assistance.
Alvin

atenpo wrote:
How do you determine the firmware version of a HP docking station?
Laptop Model: HP 2740p
OS: 64bit Windows 7
Expansion Base: 2740 Ultra Slim Expansion Base WA995AA#ABA
Thank you for any assistance.
Alvin
WA995AA#ABA shows to be a hard drive, not a docking station

How do you determine the picture that is shown on iTunes for your podcast?

How do you determine the picture that is shown on iTunes for your podcast? Is that done in iWeb or Garagetunes?

That is a supported format,
Pull the battery while the device is ON, replace after a minute, Let the device reboot 1-3 min,
see if the problem is fixed,
If not we may have to reload the device OS to get back the missing option.
Thanks,
If you need more info please ask! If not please resolve the thread using the options by the Kudos’ star, Just place the check in the Post that answered your question, Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

How do I determine the version of ADI

Hi,
We have ADI installed on some machines - can anyone advise how I can determine the version of ADI once it is installed?
Thanks

This is a little late, but may be it will help someone else in the future.
There may be an easier way, but this is what works for me.
Log into ADI. Go to the Request Center. Click the ‘tool’ icon.
It looks like a hammer and screwdriver.
On the next screen, look in the bottom left corner.
It will show the version of ADI.
HTH,
Mark

How do we determine the HTTP authentication header for our hosted solution?

How do we determine the HTTP authentication header (adobeconnect_admin_httpauth) from our hosted solution? The documentation says to find it in a custom.ini file but I have no clue how to access that.
I need to supply that to the adobeconnect plugin used with a Moodle instance, screnshot below.
If it helps, when I click "Test Connection", I see the following output.
A series of tests have been run in order to determine whether the Adobe Connect Pro server has been properly setup for this integration to work and to also determine whether the user credentials provided in the activity global settings has the correct permissions to perform the neccessary tasks required by the activity module. If any of the tests below have failed, this activity module will not function properly.
For further assistance and documentation in how to set up your Adobe Connect Pro server please consult the MoodleDocs help page for this activity module Help page
Sending common-info call:
successfully obtained the session key: na11breezrirhb4f4ryf5shqy
successfully logged in as admin user
Testing retrevial of shared content, recording and meeting folders:
error obtaining shared content folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-shortcuts</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
error obtaining forced-archives (meeting recordings) folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-shortcuts</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
error obtaining meetings folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-shortcuts</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
error creating meeting testmeetingtest folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-update</param><param name="type">meeting</param><param name="name">testmeetingtest</param><param name="folder-id"/><param name="date-begin">2015-03-14T06:53:39.000+00:00</param><param name="date-end">2015-03-14T07:53:39.000+00:00</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="invalid"><invalid field="folder-id" type="id" subcode="format"/></status></results>
error creating user testusertest
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">principal-update</param><param name="first-name">testusertest</param><param name="last-name">testusertest</param><param name="login">[email protected]</param><param name="password">9B396EA828A00203FB3E8E69010FE537</param><param name="extlogin">[email protected]</param><param name="type">user</param><param name="send-email">false</param><param name="has-children">0</param><param name="email">[email protected]</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
What are we missing?
Thanks!

Here is the docuementation for loging in with an HTTP Headder Adobe Connect 9 * Log in from an application
Seeing as there may be some modification to files on the server, you may need to work with Adobe Support to see if they can be modified in the Hosted environment.Adobe Connect Help | Adobe Connect Support

How do I determine the size of an event (cmd I does not show any size for events).

How do I determine the size of an Event in iPhoto? (Cmd + I does not show size information at the event level).

If you're running iPhoto 8 (09) select the event and look at the Info pane at the lower left hand corner of the window. It will give you the number of photos and size:
for iPhoto 9 (11) open the Event, select all of the photos in it and open the Info drawer at the right by typing Command+i. The number of photos and size will be at the top of the Info drawer.
OT

How do I determine the execution bottleneck?

Similar Messages

Maybe you are looking for