How do I do to conect an Emac with a Mac Book Pro Mid 2009
I want to conect my Emac with my Mac Book Pro Mid 2009 in order to share and move files. I bought a firewire cable 9 pins to 6 pins and conected both computers but I am unable to see the hard drives and move files.
You eMac will need to be booted into Target Disk Mode.
Restart the eMac and hold the T key. It will then show up on your MBPs Desktop.
Similar Messages
-
how many problems do you need to have with a mac book pro to get it replaced i have had 6 problems and they say they have fixed everything and somthing new happends
I have had thehad the:
ram replaced
Battery
Audio
Trackpad
os operating system
fans
And they still won't replace the laptop for me worst buy ever but i have had a imac for 2 months and nothing at all wrong .You could try calling Apple and ask for Customer Relations.
From Readers Digest-February, 2005
How to Complain
You call customer service to complain about a product, and you hang up angrier than when you started. That’s customer rage, a feeling experienced by millions of people with a major complaint, says Scott Broetzmann, president an American firm that tells companies how to offer the best customer service. His secrets to getting good service:
Have a goal
If you want your product repaired, say so. Want an apology? Speak up.
Keep it short
Focus on one problem, and be succinct.
Stick with it
You have to invest the time it takes. Don’t get what you want? Ask for a supervisor.
Skip ultimatums
Don’t threaten not to do business with them again. Why should they help you if you won’t buy from them in the future?
Plead your case
Many companies have information such as how much money you’ve spent with them and how often you complain. If you’re a good customer, they may be more willing to help.
Be nice
You’re unlikely to get what you want if you’re rude.
Good luck. -
How to get the iPhone 5c to pair with my mac book pro and my ue speaker
How to get the iphone 5c to pair with my mac book pro and my ue speaker
TerryReynar wrote:
How to get the iphone 5c to pair with my mac book pro
You don't. It only sync using iTunes.
It doesn't "pair".
and my ue speaker
What is "ue speaker"?
Ultimate Ears wirless bluetooth speaker?
Set speaker to Pairing mode.
On the iPhone, Settings > BlueTooth.
Select the speaker. -
HT4906 So how do i sync my i phone 5 with my mac book pro for photos
So how do i sync my i phone 5 with my mac book pro for photos
Getting photos off the phone? Use iPhoto or Image Capture (in your Applications Folder)
Getting Photos on to the Phone? Use iTunes. -
Hi everyone!
Please, I need a big help from you!
Do you know how to restore from Time Capsule all my mac book pro (mid 2009) files, data, Mavericks and settings after upgrading HD (250 to 500GB)?
Thank you very much!
Best regards,
MarcioRecover your entire system
See 14.
Time Machine FAQ -
How do I connect to a terminal server with my mac book pro
How do I connect to a terminal server with my mac book pro
Use the Remote Desktop icon on the tray and make sure to use the Fully Qualified Domain Name (FQDN) on the 'name of server' field. If that does not work then use the IP address to connect.
-
How can I buy black rubber feet for my mac book pro mid 2009
MY 2009 Mid Mac Book Pro bottom pad came off. Very very poor design. These should last forever. I noticed that this was a design or product failure. Thus I need the part number to order them. Cant seem to get any assistance.
I have located the pads on Ebay. I biggest issue is the design for removal and install. Yes nothing last forever!! If you look at the message boards they are failing on new product also. Poor design any way you look at it!!
pbparts.com
http://pbparts.com/shop/076-1399
Thanks syndelklett for the reply have a great weekend! -
I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
ThanxI can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera... is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
thanx -
I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?
The battery is fully charged so it is not the problem.
What happens when you use the MagSafe? -
How do I mirror my mac book pro late 2009 to my apple tv
How do I mirror my mac book pro late 2009 to my apple tv
Airplay Mirroring requires MacBook Pro early 2011 or later and Mountain Lion or later.
-
Hi guys,
before Mountain Lion came out, I had my Mac Book Pro mid 2010, nicely connected to my DENON AVR-1912 amplifier through HDMI. The Amplifier would send the signal to the TV and manage the Audio as well.
Since Mountain Lion came out, I could not anymore use my iWires HDMI cable to connect my MacBookPro to the amplifier, as my Mac would not recognize anymore my amplifier as a TV and therefore would not give me the display option that it used to give me with Lion. Result- I can not adjust the signal that goes through the HDMI cable and the signal is not recognised by the amplifier and then transmitted onto the tv. NO SIGNAL
So I went to the apple store and was told I could use the Apple tv 3rd Gen to do that. So I bought it, and went back home. After having installed and realised that it didn't worked as well, I've called the Apple customer Service. They told me thta unfortunately, since I have a Mac Book Pro bought in mid 2010, I can not benefit from the mirroring function (Come on an i7 processor is absolutely good enough to do that). I asked if I could upgrade my Mac to a machine able to do that as I need this functionality. I was told I can't. I have to buy an other machine and sell mines through their recycle program....
So I returned my apple TV 3rd Generation, and decided to buy a VeeBeam HD. This product says that I can easily stream from a Macbook Pro with an i7 and 4Gb of ram to my TV. However, when the Veebeam arrived today, I tried to install it... and it didn't work, why? Because Apple has changed some "protocols" and does not allow anymore third party companis to produce products that stream data from Apple products to a TV.
So... my dear Apple, how am I meant to watch what I've got on my laptop (movies, music and stuff) on my TV going through my Amplifier now? It really seems I can not go by cable (the cable Apple sells- iWires), I can not use the Apple TV3rd Gen, and I can not use third party products.
IS this normal to you?Hi guys,
before Mountain Lion came out, I had my Mac Book Pro mid 2010, nicely connected to my DENON AVR-1912 amplifier through HDMI. The Amplifier would send the signal to the TV and manage the Audio as well.
Since Mountain Lion came out, I could not anymore use my iWires HDMI cable to connect my MacBookPro to the amplifier, as my Mac would not recognize anymore my amplifier as a TV and therefore would not give me the display option that it used to give me with Lion. Result- I can not adjust the signal that goes through the HDMI cable and the signal is not recognised by the amplifier and then transmitted onto the tv. NO SIGNAL
So I went to the apple store and was told I could use the Apple tv 3rd Gen to do that. So I bought it, and went back home. After having installed and realised that it didn't worked as well, I've called the Apple customer Service. They told me thta unfortunately, since I have a Mac Book Pro bought in mid 2010, I can not benefit from the mirroring function (Come on an i7 processor is absolutely good enough to do that). I asked if I could upgrade my Mac to a machine able to do that as I need this functionality. I was told I can't. I have to buy an other machine and sell mines through their recycle program....
So I returned my apple TV 3rd Generation, and decided to buy a VeeBeam HD. This product says that I can easily stream from a Macbook Pro with an i7 and 4Gb of ram to my TV. However, when the Veebeam arrived today, I tried to install it... and it didn't work, why? Because Apple has changed some "protocols" and does not allow anymore third party companis to produce products that stream data from Apple products to a TV.
So... my dear Apple, how am I meant to watch what I've got on my laptop (movies, music and stuff) on my TV going through my Amplifier now? It really seems I can not go by cable (the cable Apple sells- iWires), I can not use the Apple TV3rd Gen, and I can not use third party products.
IS this normal to you? -
I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
ThanxI can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera... is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
thanx -
How can I add a Epson Stylus SX445w to my Mac Book Pro
This is the second one I've tried and failing miserably...it should be so simple...I've installed poken to the help line at Epson and they say it's down to Apple !! Somebody please help meYes I did everything that I was instructed to do!
Cheers
Joyce -
I use a two button mouse with my Mac Book Pro. It works fine, but after installing Lion, the mouse wheel goes in reverse of what it did (rolling the wheel towards your palm goes up not down the page). Anyone know how to fix this?
First sentence in OPs question:
I use a two button mouse with my Mac Book Pro
I guess the track pad settings would look similar to my screen shot?
Regards,
Colin R. -
How do I turn off authentification on a brand new Mac Book Pro
How do I turn off authentification on a brand new Mac Book Pro?
Every time my husband does something like change the name of a file, he has to put in an authentification password.
Maybe you are looking for
-
Have a HP Photosmart Premium C310a printer, copier,sca​nner problem
Have a HP Photosmart Premium C310a printer, copier,scanner problem When I try to scan it asks me for destination, PC or SD card, when you select PC it tells me to iniciate from the computer. The printer was installed with the 3100 series drivers. i h
-
HTTP and SMB over Cisco LAN-to-LAN IPSec-VPN
we are connecting Cisco 887VA router with various other Non-Cisco routers. VPN tunnels are up and we can ping devices on the remote network through the VPN. However, we have a few devices (on the Cisco lan) that provide a web interface (NAS etc) and
-
Reporting - Selection Problem.
Guys, I have a question about a selection. I have a selection when I go into it's properties, For Number of places they are defined as - Number of decimal places = From KeyFigure: 0.00. When I run the query it rounds up the number which is f
-
SOLVED Sqlitebrowser won't load since update changed dependency to Qt5
I think this is the first qt5 program I've tried to run. I didn't even have the qt5-base package until sqlitebrowser updated and pulled it down as a new dependency. Anywhere here's the error I'm getting which seems to be common among qt5 apps but I
-
Dynamic roles in Agent Assignment
Dear All I have a requirement of assigning dynamic roles which is stored in container element. When i select the role in the agent assignment of the task all the system roles come in the drop down. How to assign the role stored in the container eleme