How do i drag media to the menu screens in premiere elements 13? I can't see my audio files and the menu screens at the same time. In prior versions it was easy

How do i drag media to the menu screens in premiere elements 13? I can't see my audio files and the menu screens at the same time. In prior versions it was easy?
It is very cumbersome to "re browse" for audio files/pics/movie clips to add to menu screens. Certainly there is a way to view the media and menu screen at the same time so I can drag and drop?

Jayhawk
I think I know exactly what you are seeking and believe it cannot be done in Premiere Elements 11, 12, and 13 as it can be done in versions earlier than 11 where the Disc Layout and Project Media are viewed side by side.
Premiere Elements 13 uses a Movie Menu customization workspace which is not allowing viewing of Project Assets in the Expert workspace at the same time.
ATR

Similar Messages

  • How can I open a PDF file and enter a word in the Find field from the command line?

    Hi,
    I want to use a PDF file as the help file of another program.
    I have found somewhere an incomplete description of the command line parameters of Acrobat Reader.
    It described how to open a file and jump to its given page.
    I have written the following batch file based on that.
    rem Open pdf (prm1) with Acrobat reader at given page (prm2)
    "%adobe_rdr%\AcroRd32.exe" /N "zoom=73&page=%2=OpenActions" %1
    The following batch file opens the search dialog:
    rem Open pdf (prm1) with Acrobat reader
    rem and search for something (prm2)
    "%adobe_rdr%\AcroRd32.exe" /N "zoom=73&navpanes=1=OpenActions&search=%2" %1
    I need the simple find field instead of the complicated search window.
    Regards
                   Ferenc

    Not possible.

  • When I open my premiere elements 9, I can't see the workspace, I have to restart the program many times until it works, what happens??

    Somebody can help me, the program was fantàstic, but a few months ago, when I open my premiere I can't see the workspace, the program doesn't show me an error message, but I have to restart Windows several times until I can work normally, what happens, adobe premiere have some problems with other programs installed? I don't understand, I have a serial number, I buy a dell with the program installed, with Windows 7.
    Can somebody help me, it's very important for me this program and I use it a lot

    mcaro5
    Thanks for reporting what worked for you with regard to your Premiere Elements 9 issue. Your results will be helpful to all those who find themselves in the same situation that you encountered. It is good that the suggestion worked for you also since often problems with the same symptoms can (often do) have different causes and fixes.
    Best wishes as you move forward with your Premiere Elements projects.
    ATR

  • How can I read an audio file and brodcast it using NI RFSG?

    Hi everybody,
    I'm designing a wireless audio signal simulation system that will read an audio signal from a file and modulate the signal using NI 5671 RFSG, then broadcast it to be received at an NI 5660 RFSA. 
    All I need is some guidance from you guys. Some related examples would be of great help since I'm a new user of NI hardwares and software.
    Thanks in advance.
    Muslim,
    Communication Engineering Student,
    International Islamic University Malaysia. 

    Hi,
    I’m going to
    help here since Paul is out of the office, so far you have been able to use
    Paul’s example to generate a signal from a Wav File, right? I have a question:
    why did you combine some of the parts of the (fm-modulation) with the generate
    FM signal from WAV file if the example Paul attached is already modulating the
    signal?
    I have another question on the part
    that you are stuck when reading the file, do you want to play it back through
    your speakers or you just want to be able to see the array of samples? Have you
    seen the example “MT niRFSA Demodulate FM.vi”? And if so why it does not help? Here
    is another example for FM modulation: Sound File Frequency
    Modulated Generation using NI-567x I would like to let you know that all
    those examples Paul and I are giving you are located at our website most are
    free and you may find them yourself; if you have the necessary drivers and
    toolkits installed you should be good to go. “The examples
    available do not show what I'm searching for” What are you
    searching for? What type of analysis do you need to perform?
    Remember
    that in the RFSA part of your project what you are going to be receiving will
    be an array that contains all the points of your data not a WAV file. I will suggest trying to
    run both FM example the RFSG and RFSA with no modification for a better
    understanding of what is happening.
    I hope it helps
    Jaime Hoffiz
    National Instruments
    Product Expert
    Digital Multimeters and LCR Meters

  • How can I upload an audio file and link a page on my webiste to it?

    I host a radio show weekly, have recorded broadcasts in MP3, want to host them on itunes and have a link from my website for visitors to listen to. Can anyone help me? Thanks

    Could I ask you to read my 'get you started' page on podcasting, which should answer most of your questions.
    http://rfwilmut.net/pc
    If you still have questions do please come back.
    As to your website, which is a separate matter from iTunes, you can provide embedded players - these pages gives you some information:
    How to embed an MP3 audio file into a web page without bringing up dialog boxes in Windows
    How to create a pop-up MP3 player

  • Problem with the preview window in Premiere Elements 10

    Hi guys,
    I have a question:
    I have a new PC (data follow) and Adobe Premiere Elements 10.
    My problem is that I see in the preview-window only one grey picture. The sound runs without problems! In other chats I red, that perhaps my graphic card is the reson of my problam. Is this thus? If so, how I can repair this?
    PC:
    AMD FX-8350 Eight Core Processor 4 GHrz
    NVIDIA GeForce GTX 750 Ti
    Do you need even more?
    What I have already tried:
    - Adobe Premiere Elements 10 anew inst.
    - Graphics drivers update
    - Check DirectX
    - Windows Media Player and QuickTimePlayer anew Inst.
    Already to many thanks for your help!!!!!
    lg
    Börni

    borni123
    What computer operating system is your Premiere Elements 10 to run on?
    You are involved in the Premiere Elements 10/NVIDIA GeForce issue whose full details (description and fix) are included
    in the Announcement at the top of this forum. Copy for your convenience below.
    You gave a lot of details but did not include the computer operating system. This information may be the key whether
    the known fix will work for you. The known fix requires roll back of the driver version to about May 2013. If your computer
    is Windows 8 or 8.1 64 bit, there may not be a driver old enough to resolve the issue. This may force you consider
    a Premiere Elements version other than 10 or a different video card/graphics card for your computer. This issue is
    specific for Premiere Elements 10 and the NVIDIA GeForce cards.
    Copy of Announcement at top of this forum....
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
    Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
    back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
    glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this
    applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary
    to get rid of the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working
    Premiere Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is
    expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver
    roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    The following is the specific link in the above for determining what older NVIDIA GeForce GTX750Ti driver versions are
    available to you.
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    Please update us on your progress,
    Thank you.
    ATR

  • How can I adjust the clip speed in the editing window of Premiere Elements 11?

    In former versions of Premiere Elements I could change the function while pushing the corner of a clip in the editing window: it was not cutting only, but I could also use it to adjust the speed of a clip (clicked the clock icon, after that the speed of a clip was adjusted perfectly).
    But in Premiere Elements 11 this funktion seems to have gone: Now the timeline in the editing window seems to have the cutting function only!
    Yes, I still can use the function "prolong time" (or whatever it is called in English, I use the German version), but in this I just can guess what percentage would fit and it's a very hard "try & error" part to get it right. In the former version the speed was adjusted "automatically" to fit the duration the clip needs – that was way more comfortable.
    So, is this function really gone? I couldn't emagine why! Or how is this done now?
    Couldn't find any post or video, explaning how to do that now.
    No: The new "time zone" feature is not the same: it's not adjusting the needed speed rate automatically.
    And by the way: There is a bug in that fuction: When I once added a new time zone, I can't remove it – clicking "set back" (or reset) doesn't do anything, the time zone stays where it is and is not deleted at all! I'm using a Windows 7 Ultimate system (64 bit) ...
    I really would appreceate if someone could tell me how to adjust the clip speed perfectly to the needed duration of a clip!
    Thanks in advance!

    SG
    An interesting point that you point out
    "However, the drag-to-size method of adjusting Time Stretch has indeed been removed from version 11."
    I am assuming that you are referring to an earlier version of Premiere Elements,  having a Time Stretch icon (clock icon) above the Timeline to select, and then perhaps, with the mouse cursor, dragging on the end of the video clip to increase its duration. The keyboard shortcut to select the "clock icon" in thar instance is X. If you look at Premiere Elements 11 Edit Menu/Keyboard Customization/Windows/Timeline Window/, you will mysteriously find "Time Stretch Tool" command with a keyboard shortcut X. And, if you look at Premiere Elements 11 Edit Menu/Keyboard Customization/Applications/Time Stretch, you will find "Time Stretch" with a keyboard shortcut Ctrl+R. Bottom line: I have not gotten the keyboard shortcut X to work in Premiere Elements 11 in this regard, but the Ctrl+R does to bring up the Time Stretch dialog to do the job.
    In accord with this business of what is and what isn't...the good old Razor Tool. That disappeared from sight a long time ago. Yet users were able to use that in later versions using the keyboard shortcut C. Now for me that "C" does not work to change the mouse cursor to a razor for clip splitting at the Timeline level in Premiere Elements 11 in spite of the fact that Edit Menu/Keyboard Customization/Windows/Timeline Window continues to show Razor Tool command with keyboard shortcut C.
    On the good news side of things, if one trims a clip in the Preview Window, one is still able to drag that trimmed clip to the Timeline (Expert view) and drag it out on either of its edges with the mouse cursor to recover the whole clip. And, the mouse cursor is still going to be that red ] with a double edged black horizontal arrow going through it.
    ATR

  • How can I add location to a photo that does not have a gps location? On iPhoto it was easy.

    how can I add location to a photo that does not have a gps location? On iPhoto it was easy.

    You can use the Settings in the slideshow to Show Captions,  either the Description filed be display, the Title field or both.
    If you create the slideshow in iDVD from still photos from iPhoto you can add the Description and/or Title via the settings in iDVD.
    Since iDVD adds both automatically the user must go thru the slideshow and remove those items not wanted.

  • How can I output the alpha channel in Premiere elements 10

    How can I output the alpha channel in Premiere elements 10. What format should I use?
    Tried outputting to an AVI filet but the file did not contain an alpha channel that After Effects 5.5 would recognize.

    Bill,
    I hope you ordered 32 GB or more on that new computer After Effects 5.5 takes up as much as it can.
    The Roto Brush tool is really a timesaver over ordinary Rotoscoping. Although, my problem now is: when I try to send a 1 min. And 11 second video from Adobe Premier Pro 5.5 two Adobe Media encoder 5.5, the process hangs in wait state in the Media Encoder. I have filed a request for help on the Media Encoder forum.
    I know you will put your new computer to use in helping other people and for this I thank you.

  • How do I delete photo ALBUMS from my iPHONE 4? I sync via icloud and I can not see any folders selected in itunes. I searched the internet and basically there is no one who has the answer to how you delete the iphone photo library and misc albums

    how do I delete photo ALBUMS from my iPHONE 4?
    I sync via icloud and I can not see any folders selected in itunes.
    I searched the internet and basically there is no one who has the answer (so far)
    to how you delete the iphone photo library and misc albums
    I have also had every iphone and I am not stupid.
    charles altman

    Replying to my own post - heh. I downloaded iExplorer (http://www.macroplant.com/iexplorer/) which allowed me access to the files on the phone and there was the phantom movie in the DCIM folder. Deleted it, and all is well - although I still have 0.65gb of Other in iTunes.....

  • TS3280 How can i enable both paired bluetooth and ios keyboard input at the same time?

    How can i enable both paired bluetooth and ios keyboard input at the same time?
    This is needed for the app im working on. Need some user input via keypad as well as scanner input via a paired bluetooth scanner.

    You probably should not be using a keyboard bluetooth profile for a scanner, I am not a developer for apple so do not know the location for you to find out the correct profile you should be using for an input device that is not a keyboard. Sorry,
    I am sure if you navigate the apple developer site you will probaly finmd what you're looking for.
    https://developer.apple.com

  • HT204074 How do I use 2 apple id's on one mac?  I have my apple id on my mac and would like to use the same mac for my wife's phone and ipad?

    How do I use 2 apple id's on one mac?  I have my apple id on my mac and would like to use the same mac for my wife's phone and ipad?

    Correction, thats two itune id's

  • I have a new Apple TV which is working fine except that I cannot access .mov files which are in my iTunes Library. How can I get to these? I can run them on my computer and select Apple TV on the screen, but the Apple TV goes to a black screen

    I have a new Apple TV which is working fine except that I cannot access .mov files which are in my iTunes Library. How can I get to these? I can run them on my computer and select Apple TV on the screen, but the Apple TV goes to a black screen

    Mov is a container format, you'd need to look at the codec used by the movie file inside the container to know whether it will work with the Apple TV or not.

  • I recently changed my password to my apple id and was able to log into everything fine except the icloud on my ipad.  It reverted back to an old apple id and I don't know the password.  I have tried all the suggestions and no luck.

    I recently changed my password to my apple id and was able to log into everything fine except the icloud on my ipad.  It reverted back to an old apple id and I don't know the password.  I have tried all the suggestions and no luck.

    You didn't say what you've tried, but f the old ID is an earlier version of your current ID, temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • How can i see if other accounts on my ipod touch with the serial code?

    How can i see if other accounts on my ipod touch with the serial code?

    What? If other accounts what?

Maybe you are looking for

  • Problem with SQL Listener Name

    I installed SQL 2012 with Always on. It has 3 nodes. Here is the detail information about the server:- Server Name Failover Mode SQL Listener Name Node 1 Automatic ABCD Node 2 Automatic ABCD Node 3 Manual ABCD It seems application is having problem t

  • Caching user shared data in WebDynPro (i.e. applicationBean)

    Hi, I'd like to know if there's a standard way to cache/access user shared data on the J2EE engine running my WebDynPro app. I need to do that because Bapis call in our application are expensive. Thus we want to minimize them. It would be impossible

  • Spot healing brush issues

    When the spot healing bursh is activated the cursor changes erratically from a pointer to the spot brush and does not seem to work.  I am on a iMac 64bit machine with OS 10.7.2.  Anyone else having this issue?  hjz62

  • AUC / CIP

    Hi Guru's, We currently do not have asset module set-up in the system. We have been making manual entires through FB60. Credit - vendor account Debit - CIP clearing account & Tax / VAT account. So there is no link to an internal order or purchase ord

  • Creating SWF in Illustrator

    Hello, I get in trouble to create very simple animations in illustrator. I have a green square, and I don't know how to do to change its color when the mouse is over ... Does somebody can help me ? Thanks a lot!