How do i edit a file that has been converted to word

I have converte a pdf to a word doc. how do I get to it and how do i edit it

Hello kairle,
if I understand you in the right way you made a YourName.doc from a YourName.pdf file.
Therefore you need to open and edit the contents of this file text editors such as WORD itself, Notepad, WordPad or similar.
Hans-Günter

Similar Messages

  • I do not get a readable or editable PDF file that has been converted to Microsoft Word.

    In the past I have been able to convert PDF files to MicroSoft Word, and Edit and Save the Documents. Now, the converted files are unreadable and uneditable. How do I correct this problem?

    Thanks for the email, Stacy!
    I don't have an old PDF file that I converted to MicroSoft Word, however the new file that I am trying to convert and edit is the same kind of file that I've converted and edited before; An Invoice from the same Company. Is there a possibility that a download, MicroSoft Compatibility Pack for the 2007 Office System, onto MicroSoft Windows XP Home Edition Version 2002 computer might be causing the problem? Should I download to (.doc) or (.docx)? Any help will be greatly appreciated!
    Thanks,
    Joseph Renn Little
    Date: Fri, 21 Mar 2014 08:48:32 -0700
    From: [email protected]
    To: [email protected]
    Subject: I do not get a readable or editable PDF file that has been converted to Microsoft Word.
        Re: I do not get a readable or editable PDF file that has been converted to Microsoft Word.
        created by StacySison in Adobe ExportPDF - View the full discussion
    Hi Joseph,
    I'd like to assist!
    Have you tried converting one of your old PDF's that have worked in the past to see if it still works?
    Are these files scanned to PDF files?
    You may want to try utilizing the OCR solution.
    Let me know if that works.
    Looking forward to hearing back from you!
    Kind regards, Stacy
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6231210#6231210
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6231210#6231210
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6231210#6231210. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Adobe ExportPDF at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • How do I edit the text in a pdf file that has been converted to a Word doc

    How do I edit the text in a pdf file that has been converted to a Word doc?

    Hi BridgetteJean,
    Please go through this video this explains how to edit text in a pdf document.
    http://tv.adobe.com/watch/acrobat-tips-and-tricks/editing-text-with-the-typewriter-tool/

  • HT1040 how do I edit a calendar that has been deleted

    I made the order of a calendar and once cpmpleted the order I deleted the project but after that received an email from apple saying that my order has been called due to problems on the font
    so now I need to edit it, how do I do it?

    Restore the backup copy of the iPhoto Library from a time  just before you deleted the calendar from the library. If you don't have a backup then you'll have to recreate the calendar. 
    In the future you could do as I do and have a separate library just for calendars, each years, etc.  I use the paid version of  iPhoto Library Manager to copy albums of photos from my working library to my calendar library. I do the same for each book I create.
    OT

  • I can not open a file that has been converted from a PDF to a .doc.  I have a one year subscription to PDF Pack.

    I click on the tool to convert my pdf file to a .doc file.  When the program writes it is finished and I can down load the document, I do so.  Even though the converted file is listed as a .doc or docx, neither Microsoft Word nor OpenOffice can open it.  What is going wrong?
    I also click to be able to edit my pdf document, but no commands to edit it come up.  Am I doing something wrong?

    Hi ktewksbu,
    I don't think you're doing anything wrong. What is the file size of the converted document (and the filename extension)? Do you have the same issue with any file that you try to convert? Or is the problem specific to one file?
    As for editing a PDF file, that requires Acrobat. (Adobe Reader lets you comment on a PDF, but  not alter its content).
    Best,
    Sara

  • Editing files that have been converted from Word documents

    Will I be able to save and edit the PDF files I convert from Word documents?

    Hi,
    Yes it is possible to edit the PDF files and save the changes. You need to use Adobe Acrobat for this.
    Please download and test the 30 days Trial for Adobe Acrobat  : http://www.adobe.com/cfusion/tdrc/index.cfm?product=acrobat_pro&loc=us
    ~Pranav

  • How to open a RAW file that has been created with Photoshop CS5.5?

    I did some HDRs and when back in Photoshop CS 5.5 I tried to save them (16 bit colur depth).
    GIven the option to save the image as .RAW file I did that but now:
    Which program can be used to open those Photoshop created RAW files???
    When I try to open one of these files with Photoshop I just get noise.

    1.  Photoshop CAN open (flat) PSD files through Camera Raw, no problem.
    2. There are those of us who have used every version of Photoshop, going back almost 20 years, and who *still* haven't used them all.  I just don't see that as any kind of problem. 
    3. Lastly:  You have been asserting here all along that Photoshop won't re-open a 16 bit .raw file properly.  That's absolutely wrong.  If you get the bit depth, number of channels, and pixel counts right (i.e., the same as when the image was saved) it WILL open properly.  The thing is, with the Photoshop raw format there really is no metadata in the file, meaning YOU have to put all those numbers in.  It's not a general purpose "push one button and done" kind of format - it's a specialty format, as Chris noted above.
    -Noel
    1) will try that out
    2) I am just curious and like to try out all functions and see what it does and how it works.
    3) guess I have to play arould with it a bit more to find the right settings that allow me to save and re-open the file correctly.
    BTW: when writing messages here my FF browser doesnt show any cursor in the text field which makes it difficult to see where I am. Does everyone have that problem?
    Just noticed: I have to click on to something in the pulldown menu and later the cursor appears. I have the same problem with facebook. Have to click somewhere else first and then go back to the text field to make the cursor appear.

  • How do you find a file that has been replaced?

    I might have accidentally replaced a word file with the same name from something else, and now I can't find the original. Is the original gone for good or is there some place else that I can check? It is a school paper and I am freaking out it is due the end of this week.

    TkMcCray wrote:
    I didn't have my backup assist on when I wrote the paper. I have set it up now. But like everyone stated it is gone, so I am rewriting it now and using this as a learning lesson. Thanks for your help
    He meant, do you have a system backup via Time Machine, Carbon Copy Cloner, etc.?  That's the shortest way to restore your complete system and data when (not if) your hard drive dies.
    Have a nice day.

  • How to get PDF file that has been transformed into docx into my filing system so I can work on it???

    How can I get the PDF file that was transformed into a docx file into my filing system to be able to work on it and translate it as the customer requested?

    THanks for your reply.
    Well what happens is I bought the program. It gives you a button to click,
    you log in and then a box opens up asking you to select the file, I go into
    my filing system (in Windows explorer) select the file, and the program
    converts it into docx, my choice.  I can read it there and when I try to
    copy and paste it into my file where the PDF version is saved, it behaves
    like an "image", and I can't save it.... or it saves likes something you
    save on the internet, so you have to go into internet every time you want
    to see it.    I have also pressed any amount of buttons to see if it will
    give me the option to save it any other way, and have found nothing.  What
    I would need is a file in docx.format that I can edit.  People send me
    things in PDF and sometimes I can just copy it off the PDF file and save it
    in WOrd, then I can translate it for them. But sometimes the PDF file
    doesnt allow me to copy the text.  If it is in image form, I cannot work on
    it.  It means printing it, so I can copy type it into Word... and for that
    I certainly wouldnt need to buy a program.  Its just double the work and
    ends up that the job takes twice as long.!
    Sorry  if I am a bit dumb with informatics.  But I simply could not find
    any way whatever to  copy the PDF file that was transformed into Word, in a
    format that would enable me to edit it.
    Kindest regards,
    Margery
    2013/12/2 Test Screen Name <[email protected]>
        Re: How to get PDF file that has been transformed into docx into my
    filing system so I can work on it???
    created by Test Screen Name<http://forums.adobe.com/people/TestScreenName>in *Adobe
    ExportPDF* - View the full discussion<http://forums.adobe.com/message/5890871#5890871

  • FCPX, How do I reconnect a video file that has been modified or over written?

    FCPX, How do I reconnect a video file that has been modified or over written?
    As an animator, I am constantly modifying and overwriting movies files that have already been imported into the Final Cut time line. In FCP7, I could easily modify and update movie files and have those changes appear in the timeline without the need to reimport and re-edit those clips, but FCPX seems to lose it's connection with any modified or overwritten file, making all the editing work I've done to these files worthless.
    Does anyone know of a way to reconnect to a modified or overwritten file? Because, this one single issue makes FCPX completely worthless to me.
    Andy Murdock

    If you import the new clip , select it and drag over the old offline clip , you can choose from the menu ...

  • Is there any easier way to edit imovie files that have been exported as mov file then added to FCE 4?? As every move I make has to be rendered and takes forever??? Also my recording is going out of focus without me touching the camera, why has this happen

    Is there any easier way to edit imovie files that have been exported as mov file then added to FCE 4?? As every move I make has to be rendered and takes forever??? Also my recording is going out of focus without me touching the camera, why has this happened any idea what causes this??
    iMovie '08, Mac OS X (10.5.8), FCE 4

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • How do I open a pdf book cover file using Acrobat XI into Indesign CC?  Everytime I try, it says I am trying to open a file that has been saved wrong.

    How do I open a pdf book cover file using Acrobat XI into Indesign CC?  Everytime I try, it says I am trying to open a file that has been saved wrong.

    PDF files cannot be natively opened in InDesign. They can only be placed as graphics.

  • How do I fix or open a corrupted file that has been corrupted by some sort of programmatically email

    How do I fix or open a corrupted PDF file that has been corrupted by some sort of programmatically emailing?
    Please see the following screen shot:
    http://i67.photobucket.com/albums/h292/Athono/pdfproblem_zpsbd9bdc00.png

    Well, it is a pdf file, and it once was a readable one, I suppose.
    It must have data on the hex or binary level that can be retrieved. 
    If necessary, I will have to look into the file format of a PDF file?  Is this documented?

  • How do I open a Numbers file sent to me that has been converted to Excel?  I already have MS Office for Mac.Ow

    How do I open a Numbers file sent to me that has been converted to Excel?  I already have MS office for Mac, but nothing comes up when I click on the imported file.

    If it indeed has been converted from Numbers to Excel, it will have a .xlsx suffix at the end of the name. Do a Get Info on the file if the suffix doesn't show. Else, it may still be in Numbers format and be unreadable by Excel.
    If it is in the right format, and you don't want to have to do what mende1 has instructed above for every successive file, click on the "Always open with..." option. That will associate the .xlsx suffix to Excel from thereon.

  • Changing a number in an excel file that has been changed to a PDF

    Changing a number in an excel file that has been changed to a PD ?

    Hi llkwx,
    I would like to confirm ,do you want to change the page number of the PDF  or any other number in the data given in that PDF?
    For changing the page number display
    You can select Page Thumbnail option from the left hand side .In that panel ,right click and select the option "Number Pages" from the drop down menu.You can further change the page numbers as per your requirement.
    Adding page numbers to PDF
    Tools>Pages>Edit Page Design>Header and Footer>Add Header and Footer>click Insert Page Number
    Do write us back with your response .We will be glad to help you out with your queries.
    Regards
    Sukrit Dhingra

Maybe you are looking for