How do I edit in multitrack?

When I delete a section of a clip, how do I automatically get Audition to join the remianing two pieces of the clip together?

I don't know a way to automatically join the two clips together but if you use "Ripple Delete" (Alt Del) instead of just Delete, the two clips will be automatically butted against each other. At the end of all your edits, just mix the collection of clips down to a new track.
Generally though, it's better practice to use Edit View for destructive editing and keep multitrack for non-destructive processes.
Bob
Edited to add: Ripple Delete is in AA3.0....I can't remember whether it was in earlier versions.

Similar Messages

How do I edit a merged clip in Audition, that was created in premiere to correct the synchronisation, and have it all updated to the premiere clip?

Hello,
How do I edit a merged clip in Audition, that was created in premiere to correct the synchronisation, and have it all updated to the premiere clip?
I have tried several tutorials but these either:
- show correction in premiere sequence (which is not practical; given the huge number of files we have)
- or show the editing in audition of a sequence, not the clip.
We have started merging audio and video (removing the original audio during merge) but some of the merged clips are out of sync, so we need to correct manually, BUT we want to correct the merged clip, which may or may not end up being used, so we do not want to take it to the sequence as all we are doing is prepare the synced files for editing.
Any idea how I can correct the synchronisation in Audition?, when I right click on clip and select "Edit in Adobe Audition" I get a list of files but not a multitrack session where I can see my video and audio tracks.

if premiere pro doesn't sync your footage properly, and you have a huge number of files, you may want to look at pluraleyes. there is a demo, and if it works properly, it would save you time to have it done right the first time, instead of tracking down random merged clips with bad sync.
premiere will either export a complete sequence or "edit clip in audition". the edit clip will create a copy of the original audio and open that in audition. there is no dynamic link, its just an audio file open in two programs at the same time. since there is no dynamic link, its not possible to bring merged clips into audition.
Adobe Premiere Pro Help | Synchronizing audio and video with Merge Clips
Once created, the merged clip cannot be re-synchronized, or adjusted. You must make a new merged clip.
Merged clip audio results in mono track audio only.Final Cut Pro XML and AAF interchange formats are not supported.
this doesn't give me much hope that audition or any other adobe program outside of premiere will help you fix the problem merged clips.

How do you edit cropped audio?

Hello everyone
I would like to apply a cutoff to the frequency range of my audio using Crop, then edit the cropped audio in the Multitrack mode.
The following page explains how to crop audio but doesn't explain how to make edits to it in the Multitrack mode:
Adobe Audition Help | Copying, cutting, pasting, and deleting audio
Can you just select Crop in the Waveform mode, save the cropped data and make edits to the data in the Multitrack mode?
Thank you in advance,
Ead

iMovie is a good way to do this if your project is film based. If your using photos (slideshow) in iDVD, I would be inclinded to use GarageBand to edit the audio portion of your project (It may be just me, but whenever I've attempted to create a slideshow in iMovie, the photos look "grainy" to me, not as clear).
If you know the time of when you want your songs to change, you can adjust the length (time) of each song in GarageBand as well as fade in/fade out transition of the two or more songs. After saving, you then can access the saved audio mix via the audio tab in iDVD. (I'm making an assumption that one might be familiar enough with GarageBand to do this

How do you edit text that is in a text box?

How do you edit text that is in a text box? I just want to change the font color of the text. Solution in the Help files recommends selecting the text and then selecting Optional) To make further changes to the text box:
   Using the Select tool or the Text Box tool, click an edge of the text box to select it, and then drag a corner to resize it. Use the Properties toolbar to change the border and fill options.
   Double-click the text box to edit the text or change the text attributes. Drag across text to select it, and then select options from the Properties toolbar.
This is what the help files recommend
(Optional) To make further changes to the text box:
   Using the Select tool or the Text Box tool, click an edge of the text box to select it, and then drag a corner to resize it. Use the Properties toolbar to change the border and fill options.
   Double-click the text box to edit the text or change the text attributes. Drag across text to select it, and then select options from the Properties toolbar.
When I try the above solution I don't have a "Options" in the "Properties" toolbar.
Why would they change a process that was so simple in previous editions to such a hidden awkward process?

Try with a Brightness/Contrast adjustment layer and/or changing the blending mode.
If the effect is too much for the rest of the bulb, you may be able to mask it out.
It would help if you post a representative picture here on the forum page for us to look at.

How do I edit text in a fill-in form?

How do I edit text in a fill-in form? I am using Adobe Acrobat Pro version 10.1.8 in Mac OSX. The document was created in Word, saved as a pdf, opened in Acrobat, and form fields added. Now I need to change some of the text on the original form (mostly just dates). Ideally, I wish there were a way to edit the forms overall - add or delete lines, edit text, etc. I've done this before, but I always seem to need to go back to Word, edit the original document, and then re-create the form fields... it takes me a huge amount of time, making sure each field is formatted correctly (font, size, wrapping, text resizing, etc) so it looks ok when the user enters their data and prints it. Please, tell me there is a better way!
If the solution is upgrading to a higher version of Acrobat, I'm listening... but ideally I can get this batch done in the software I have, then worry about learning the newest version.

Fonts are Licensed asset's subject to single user use. They are not intended to be exchanged, redistributed, etc.
As part of the PDF standard they included in a document so that the document can be viewed reliably without the font be installed on the viewing station.
To edit you must have the font installed on your computer. The ability for second parties to use the font would violate font licenses.

How do I Edit an Existing PDF Form Without Losing Form Functionality

I'm brand new to Acrobat but familiar and proficient with Flash, PhotoShop Premiere Pro, After Effects, Dreamweaver, Fireworks etc.
The company I work for sells office supplies. We sell 57 distinct items. We have Acrobat 9. I am designing a PDF order form with fields that can be emailed to our clients as an attachment. They fill out the form, it calculates the total, they send it back to us, we fill and ship the order. Basic and straightforward.
I can add form fields to my order/pricelist... not a problem. The question is:
Once I have brought a PDF into Acrobat and add 57+ fields and calculations, which is a time consuming process, how do I edit an item price at a later date, if someone in the company decides to make a change to our pricing?
See..., If I save the original Microsoft Excel document as a PDF, Acrobat can't edit the text for some reason. Something to do with "Renderable Text". Now if I open the PDF saved from Microsoft Excel in Adobe Illustrator, I can use the text tool to make changes. That doesn't help me... just saying. Why can't I edit "Renderable Text" with the Acrobat Text Tool? Someone in a forum stated that Acrobat is NOT a word processing program! If that is an accurate statement, it would appear that Acrobat can at least work with base PDF documents to make certain types of modifications and add functionality. Is that correct?
Here's the problem. I create a PDF with form functionality. Everything works great. The boss says, I want to change the price of the scissors. I can't change the text in Acrobat because of the "Renderable Text" nonsense. Does this mean that I have to re-apply all of the form fields and calculations to the new base PDF document every time there is a minor change? I know there has to be a simple work around. Should I upgrade to a newer version of Acrobat?
Is it possible to save the original existing form functionality as a layer or overlay to be applied to the new modified base PDF document? Kind of like so many other Adobe products do including PhotoShop, Fireworks, Premiere Pro, After Effects, Flash etc., so that all of the form functionality can be applied in one big chunk? Premiere Pro has the time-saving feature of "Paste Attributes". It's a real time saver.
It may be simpler to just direct me to a video that goes through the process of creating a PDF order form with fillable fields that multiplys quantity by unit price and totals one column.
I already created a prototype of the form in PhotoShop which can be saved as a PDF. The finished order document appearance has 95 horizontal 3px wide lines and 6 vertical 3px lines, kind of like what one might expect to see in an Excel spread sheet. The form also contains some graphics and unconventional text areas that acrobat could overlay text fields and everything would be fine.
With these great number of horizontal dividing lines, It doesn't seem practical or even possible to create the basic layout in Acrobat. As I originally stated, I'm new to Acrobat and would like suggestions for a workflow that enables easy editing of an existing PDF document with form fields. I want to avoid the monumental task of re-doing all of the fields and calculations.

For what you are trying to do that is probably what you want -- Replace Pages. There are a few more issues that you need to be aware of since this is a business form. If customers are using Reader XI, it is not an issue.
On the renderable text, can you see the text list when you look at the font tab in the document properties (ctrl-D)? If not, they you do not really have fonts to edit. This may be the type of fonts you used in the original or the way in which you did the conversion to PDF. You need to have fonts that are on your system and then be sure to embed them (otherwise others may not be able to read them because of different OS or such).
As to e-mailing the form, that is fine (though there are sometimes problems with various clients and PDFs -- but usually on the sending end).
For collecting the data you may want to try a different route. For users of Reader XI, they can save the form with the data. Prior versions could not do that unless you enabled the form for Reader. However, this latter process has a 500 form use limit -- A license issue. If the data is submitted, then it does not make a difference. The folks with Reader XI can still save the form with the data, others will have to print a copy for their records.
The data can be imported to the form on your end and so you would have the exact same results as what was filled out. However, the submission process should be set up to submit to a web script for your receipt and not use mailto. The latter has problems that you have no control over due to proper operation with the mail client on the user machine. Typically the mail client must be the default and use MAPI. In any case, it is not reliable (not for business use). So submission to a web script is useful. The data in AcroForms would be of the type FDF (or possibly XFDF). If for some reason use created the form with Designer, that limit any editing in Acrobat since it is no longer a real PDF, but an XML container that Acrobat and Reader can display and interact with, but not change. Again, submission to a web script is still preferred.
For dealing with a web script and some coding for various languages, you can check out the FDF Toolkit. It has been around a while, but should still handle the CGI needs of the submission. In addition, it has tools for adding the data to a database and other typical operations for data collection. You can save the FDF files and import them to the form and deal with the data there also.
The use of Replace pages would do the job if all your form fields will still need to be in about the same location. Form fields are mark up and the pages are referred to as the document. Thus the replace pages will just original page and leave all the form fields. You will still need to go back and fix the value within the fields themselves, but that is a field edit.

How do I edit my pictures on my computer?

How do I edit my pictures on my computer?

This should help. The Revel apps for mac, iphone and ipad have editing. The web version does not support editing (adoberevel.com). What platform(s) are you on?
Pattie
EDIT
FAQ: How do I edit photos in Revel?
http://forums.adobe.com/message/5088287#5088287

How can i edit contacts in bulk

Bought an iPhone 5 and transfered contacts from my old phone and my phone contacts first and last name were reversed. How can I edit my address book contacts in bulk instead of one at a time? And then have these updates in my iPhone 5?

to any1 that wants to use the scripts and have them work just type "save" on the next like after end tell and itll do it........

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

How do i edit my billing info if my credit card associated with apple id expired and i have a duty to app store from the time when i had the old credit card?

how do i edit my billing info if my credit card associated with apple id expired and i have a duty to app store from the time when i had the old credit card?
so the thing is a few days ago i made an app store purchase and i didn't know i was running out of money on my credit card. i realized that only when i tried to purchase another item and it didn't work. nothing special til here. the problem is that meanwhile my credit card was replaced by a new one by the bank because the old one was soon expiring. So the data associated with the old credit card no longer exist.
i tried to edit my billing info associated with my apple id in order to enter the new credit card data, but the system doesn't allow me to do that.
so i can neither pay my purchase, nor edit my info, nor access app store anymore.
what's next? any ideas? thanks

Servers down wait till status is fixed to change or add your data http://www.apple.com/support/systemstatus/

How do I edit photos on my PC?

I found my pics in my library and clicked on the one I want to edt but there is no editing button there. How do I edit my pics?

Shelby
The apps support editing, but the browser version does not. You do have some options, though.
You can edit in Photoshop Elements 11 or Lightroom if you use either program and upload to Revel from there, You can use older versions of Photoshop Elements or Photoshop if you have them or any other editing program and save the photos to your hard disk and then upload to Revel.
You also have access to the free Photoshop.com Photoshop express editor if you are not a user of Elements or another editing program. I gave instructions to another user on this post if you are interested. http://forums.adobe.com/message/5232833#5232833 .
You can sign up to be notified when Revel is available for Windows and Android by going to http://www.photoshop.com/products/revel ….scroll down and look on the right side where it says "coming soon- Notify me" for windows or android. Click and you can sign up to be notified.
Pattie

How do i edit photos with out geting rid of the orginal

I try and edit photos, in Iphoto, but how do i edit a photowith out it geting rid of the orginal?

Hi Robbin,
When you edit in iPhoto, iPhoto saves the original in an originals folder and the edits are made on a copy. You can always revert back to the original by control clicking on the image and scrolling to "revert to original"
If you want to see both the original and the edited version in the library, duplicate the original and edit the duplicate image.

How do I edit photos on my pdf? it only lets me edit the text

how do I edit photos on my pdf? it only lets me edit the text

Hi Caryn,
Actually Creative Cloud is not my speciality - but I would recommend posting your specific questions to that forum:
http://forums.adobe.com/community/creative_cloud
I'm sure our community members would have a better idea if it is right for your project!
Kind regards, Stacy

When I download pictures from my camera they use to also downloan in Cannon's Easy Photo. In my new computer they don't. I want them to. How??? Also how do i edit photos in Photoshop and print 4 to a page?

When I download pictures from my camera they use to also downloan in Cannon's Easy Photo. In my new computer they don't. I want them to. How??? Also how do i edit photos in Photoshop and print 4 to a page?

Please study this, then come back with more specific questions
Learn Photoshop Elements 12 | Adobe TV
Learn Photoshop Elements | Adobe TV
Use of the tools is pretty much the same in all versions of the program.
"Edit" is a menu item in Photoshop Elements Editor. Don't you see this?

How can I edit photos in iPhoto in Photoshop Elements? I select PE in iPhoto preferences but they stay in iPhoto for editing.

How can I edit photos in iPhoto in Photoshop Elements? I select PE in iPhoto preferences but they stay in iPhoto for editing.

Here's something you can try with a copy of your current library.
1 - go to iPhoto's Events preference pane and set the auto split option to 1 day per even.
2 - go the the Events mode, select all Events.
3 - go to the Events menu and and select Autosplit Selected Events.
which will give you an event for each day.
4 - again select all events (although it might be better do to fewer at a time) and export them to your desired destination via the File ➙ Export ➙ File Export menu option with the following settings:
The workflow above will produce a folder for each days photos with the date as the folder's title.

How do I edit in multitrack?

Similar Messages

Maybe you are looking for