How do I enable the flip/flop image button in the geometry room?

How do I enable the flip/flop buttons in the geometry room. A noob question to be sure, but I just can't figure it out. The buttons are grey, and won't respond when I click on them.
I shot on the HVX using the brevis adaptor, so the footage is all upside down. In FCP I corrected this, but upon importing the project into Color, the images were upside down again. Do I need to re-flip them in color for the final output? Or will they automatically be subject to the effects already in my time line when I export back to FCP? Either way I'd like to temporarily flip them in Color so I don't have to stand on my head while color correcting.
Anyone out there who can clue me in?

Use FCP... the geometry in COLOR was never meant to be more than a convenience, sort of... Final Touch always ignored everything in the Motion tab until recently, with ambiguous results. Now one doesn't really know where the flips flops and flies are coming from unless you've done them yourself but I do notice that keyframed geometry-composed camera moves rarely import or export correctly, and interlace is poison.
jPo

Similar Messages

How can I view information about an image, such as the file name and exposure, on the Ipad?

how can I view information about an image, such as the file name and exposure, on the Ipad?

You can't with the built-in Photos app, but there are apps such as iPhoto which allow you to see the exposure details (aperture, shutter speed, focal length, ISO). PhotoMeta also shows you that info

How do I enable playback of music without intermission on the iPhone?

How do I enable playback of music without intermission on the iPhone?

Doing so on a 3G iPhone "can" take several hours. So, plug your phone into a wall outlet, then Settings>General>Reset>Erase All Content & Settings. When finished, your phone should look just like it did when first taken out of the box, with nothing but the OS on it. Conversely, you can connect it to iTunes & restore it as a "New" device. Just don't sync after you restore as new.

Misplaced my ipad mini now i have found it . how do i enable it . i turned it on and the message read disabled try again in 22,809,570 minutes. really.

misplaced my ipad mini , now i have found it how do i enable it . i turned it on and the message read ipad is disabled try again in 22,809.566 minutes , really

Restore it.

How to start the Toshiba Ghost image files from the HDD

Hello
Ok this is a tough one but hopefully some tech/wizz can help me out.
I have all the necessary CD Recovery disc but my Toshiba laptop CDRom has died and i'm looking for replacement at the moment.
I have managed to copy the image files and all the other info from these CD's onto the laptop hard drive via a network from my desktop cdrom. I did try to use the desktop cdrom to boot the 2.5" laptop drive but it knew it wasnt a toshiba laptop so wouldn't let me recovery.
However now I have manage to copy all the ghost image files onto the laptop hdd I'm stuck on how to run installation via dos.
The laptop hdd is formatted and all i have are the following files
span.bmp
setenv.bat --------> batch file contains following lines
@ECHO OFF
SET GHOSTPAR=
SET SWN=01237000
SET EXT=GHO
SET VOLLABEL=%SWN%
SET FILENAME=%SWN%.%EXT%
01237001.GHS------> PART 2 OF IMAGE
01237000.GHO -----> GHOST IMAGE MAIN
01237000.CRC
A folder called G_INST
which contains 3 extra folders BMP, DOS and TOOLS and span.bmp
I cant figure out how i can run ghost to extract and recovery my HDD can someone help me :)
Thanks in advance
Simon

Im really skeptical if you will be start the Toshiba ghost image files from the second partition without using the Symantec Norton Ghost software.
I have created a ghost image of the C partition and placed it on the D partition.
To recover the C partition I have to start the Ghost Utility and have to use the image file .gho from D partition
I have googled a little bit and found the useful instruction how to recover the Portege M3500 without using an CD/DVD drive. Maybe this will run also on the Sat A30.
http://mobilepcwiki.com/mpc/index.php?title=Toshiba/Portege_M3500/FAQ
By the way: the internal, compatible ODD can be ordered from the ASP in your country!

How can I construct a flip flop or other similar VI?

Hi all,
I am trying to develop a hardware simulator and the hardware has some feedback in it. For starters, I'm trying to make a simple D flip flop. I can do this using a while loop and shift registers or a feedback node, but I have to make the module non-reentrant so that it stores the internal state between calls.
The problem with this is that I want to be able to put multiple flip flops on a diagram and if the VI is non-reentrant, which I have to do to use functional global variables, they all wind up sharing the same internal state, which is unacceptable. But of course, I can't make it reentrant, otherwise the next time I excute the flip flop VI, it won't be in the right state.
It seems that LabView needs a way to generate a VI that is re-entrant, but yet holds it's internal state on a PER-INSTANTIATION basis.
Any ideas?
Thanks,
Jason

JasonWB wrote:
Thanks - this seems to be working. I have an associate who claims he needs to change the name of the VI, even if it IS reentrant - I am looking into that. Thanks much for the help! I was getting confused with functional globals, thinking that was what I needed. So, I assume that as long as the particular instantiation is loaded into memory, it will hold all internal values in shift registers?
Your associate may be seeing something that could be tricking him into thinking that. Like if he is initializing the shift registers outside the loop, then the registers will not hold the previous value because they get re-initialized on each run. This has nothing to do with it being reentrant, it's just doing what it's wired to do.
Functional Globals are actually just subVIs that are not reentrant so that they can share data the same way a regular variable does.
And you're correct in that as long as the reentrant is in memory, the values in it's shift registers will hold.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

How do i hide the "print as image" option in the menu ?

I need to hide the "print as image" option in the menu for some users.
what would be the best way to do it ?
(the result should be that the users do not see the print as image option when they want to print something
with Adobe Acrobat reader)
Thanx
M.

Hello there, you can start with this
Check Firefox page settings
If a web page prints incorrectly in Firefox:
At the top of the Firefox window, click on the Firefox button, go over to the Print... menu (on Windows XP, click on the File menu) and select Print Preview. The print preview window will appear.
In the print preview window, make sure Scale is set to Shrink To Fit.
Make sure the Portrait orientation is set.
Click Page Setup.... The Page Setup window will appear.
In the Page Setup window, click the Margins & Header/Footer tab.
In the Margins section, make sure the page margins are set correctly (the default setting is 12.7 mm, or 0.5 in).
Click OK to close the Page Setup window and return to the Print Preview window.
Back in the Print Preview window, click Print. The Print window will appear.
Make sure the correct printer is shown in the Name field.
Make sure the Print to file setting is not selected.
If you made changes, go ahead and attempt to print the page again. If not, follow the instructions below.

How to adjust the size of image to suit the size of panel?

i have got a panel which contains a image.but i don't want to use scroll panel if the image's size is bigger than the panel.
what can i do to change the size of image to suit the size of the panel every time i want to display it?
thanks

Reply 3 of this thread should be able to help you:
http://forum.java.sun.com/thread.jsp?forum=31&thread=286424

How to add a hyperlink to a image button in theme area?

Hi!
We need to make an image button (on the theme area) to be
clickable -- i.e., once you click that image button, it will
call www.yahoo.com.
Please advise how to do it.
Points guaranteed. Thanks!

Hello,
Maybe this will help you?
http://help.sap.com/saphelp_nw70/helpdata/en/9d/52f973810cb448842e35e13ad6c992/frameset.htm
Gene Madikrama

In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

Please don't post the same question multiple times!

Hello i hav an ipad mini and i was in the middle of the ios 8 update and i held the sleep and home button at the same time to cancel the update and now it wants me to connect to itunes i dont no how to do that can someone pleaze help me

hello i hav an ipad mini and i was in the middle of the ios 8 update and i held the sleep and home button at the same time to cancel the update and now it wants me to connect to itunes i dont no how to do that can someone pleaze help me?

RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

Does anyone have the code to use an image button as the reset button?

Does anyone have the code to use an image button as the reset button? I'm finally at the end of the form and got the submit button to work as an image button, but cannot do the same with the reset button. Any help is greatly appreciated!

I agree.
http://www.456bereastreet.com/archive/200909/almost_never_add_a_reset_button_to_a_form/
Nancy O.

My ipod touch 4 gen is in recovery mode and i dont know how to get out of it,i tried everything like hold the home and top button at the same time. All it did what g to the apple logo and went back to recovery mode any help?

My ipod touch 4 gen is in recovery mode and i dont know how to get out of it,i tried everything like hold the home and top button at the same time. All it did what g to the apple logo and went back to recovery mode any help?

Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
kevinpowell1 wrote:
how can i get it out of recovery mode?
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

STMS: how to hide the Import All Requests button in the import queue view?

Hi All,
I'd like to know how to hide the "Import all requests" button in the import queue view.
Thanks a lot for your answers.
G.

Hi,
about hiding i have a doubt but u can inactivate by following procedure,
As referred in a thread:
On the domain controller, in STMS>overview>systems>(double click the one you want to change)>Select Transport Tool tab and click on change. Add Import_single_only value 1, import_single_strategy value 1 and no_import_all value 1. Save distribute and activate.
or
Refer to OSS NOTE 194000.
Thanks & regards.

How may one cancel the download of an update that was started by having actuated the "Check for Updates" button in the "About Firefox" window, please?

How may one cancel the download of an update that was started by having actuated the "Check for Updates" button in the "About Firefox" window, please? If possible please cover all platforms, Mac, Windows, Linux, although the first mentioned is what currently applies to my circumstances.
Thank you.

Such a download is usually saved in an updates or updated folder in the Firefox program/application folder.
You can delete this folder to cancel the download.
If files already have been downloaded then remove the files in the updates and updates\0 folder.
*http://kb.mozillazine.org/Updates_reported_when_running_newest_version
*http://kb.mozillazine.org/Software_Update
Mac: /Applications/Firefox.app/updates "/path_to/Firefox.app/Updated.app"
Linux: "/path_to/firefox/updated"
Windows: C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates

How do I enable the flip/flop image button in the geometry room?

Similar Messages

Maybe you are looking for