How do I enable the hot swap function on motherboard MS-7758?

Hi,
I just installed a hot swap rack in my computer that runs windows 8.1. It shows up in device manager under Other devices->unknowns device, but the rack will not read a hard drive when i put one in it. I contacted the manufacturer of the hot swap bay, and they told me that i should make sure that the hot swap function is turned on and I do not know how to do that. Any help would be greatly appreciated!
 

Quote from: xmad on 05-April-14, 02:37:50
Advanced section> integrated peripherals
You should see it there.
Thank you, That saved me at least an hour.

Similar Messages

  • How do I enable the blue function keys on an old Pavilion N5445 with Windows XP?

    Yes, how do I enable the blue function keys on an old Pavilion N5445 with Windows XP?
    The blue function keys currently do not work.
    There is NO mention of the function keys (or even action keys) in the BIOS.
    Let me repeat that so that nobody posts a stupid link to how to turn on the function keys in the BIOS. THIS IS AN OLDER LAPTOP.
    There is NO mention of the function keys (or even action keys) in the BIOS.
    There is NO mention of the function keys (or even action keys) in the BIOS.
    There is NO mention of the function keys (or even action keys) in the BIOS.
    There is NO mention of the function keys (or even action keys) in the BIOS.
    There is NO mention of the function keys (or even action keys) in the BIOS.
    There is NO mention of the function keys (or even action keys) in the BIOS.
    Somehow the function keys got turned off. So I suspect there's a way to turn them on again.

    HI Lukon:
    Thank you for your post.  I will do my best to assist you in this endeavor!
    I regret that you are experiencing an issue with the function keys. I am providing you with a link to "Configuring the Multimedia and Internet Keyboard Buttons in Microsoft Windows 98, Me, and XP"    click here. Have you tried running the HP Support Assistant to look for updates and resolve issues.   click here. Have you tried the MS Fix it  tool click here to aid it resolving it. I hope this helps.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • How do I enable the "fn  + enter" key to work as an "insert" function for windows on my mac laptop?

    how do I enable the "fn  + enter" key to work as an "insert" function for windows on my mac laptop?

    enable /disable function within the Bootcamp control panel within Windows Vista or 7

  • How do I enable the GD library in OAS 10.1.2 ?

    I am running OAS 10.1.2 on HP UX 11i 64 bit.
    OAS 10.1.2 supports PHP, but the image function does not work. The imagecreate function gives the error:
    Call to undefined function: imagecreate()
    According to www.php.net, image functionality requires the GD library and one
    is bundled since PHP 4.3. OAS 10.1.2 has PHP 4.3.9 so I assume that GD is
    available.
    But how do I enable the GD library?
    Herman

    In php.ini look for extension_dir, make sure it points to somewhere that exists and then further down you will see Dynamic Modules set out a little like this...
    ;extension=php_gd2.dll (Windows)
    For installation (Quote from PHP Manual)...
    To enable GD-support configure PHP --with-gd[=DIR], where DIR is the GD base install directory. To use the recommended bundled version of the GD library (which was first bundled in PHP 4.3.0), use the configure option --with-gd. GD library requires libpng and libjpeg to compile.
    In Windows, you'll include the GD2 DLL php_gd2.dll as an extension in php.ini. The GD1 DLL php_gd.dll was removed in PHP 4.3.2. Also note that the preferred truecolor image functions, such as imagecreatetruecolor(), require GD2.

  • How do I enable the eliminate browsing history on my IPad? Thanks

    How do I enable the remove browsing history function on my IPad?
    thanks

    If you want to clear your browsing history use Settings > Safari > Clear History.
    To turn on "Private" browsing touch the URL field and then touch "Private" at the upper-left of the keyboard.

  • How do I enable the rotate screen on iphone 4?

    How do I enable the rotate screen on my iphone4, I some how locked it?

    The problem was created when Apple added the "swipeup" feature to your home screen (ios7).  When you swipe up to bring up those often used functions like camera, calculator, etc, it is WAY too easy to accidently touch the Portrait Lock button near the top of the screen. There is a row of round buttons there to turn off or on various functions; the one on the far right is portrait on or off. If you want your screen to rotate for you, the button must be black: white freezes the screen so it won't rotate. I have the wi-fi and bluetooth white (on), but the others are black (off).

  • I have a Verizon IPhone 4 and i can't figure out how to get my ringtones from an app to my iTunes account, it doesn't have a tab for Ringtones! I have tried unplugging it and checking if would show up but it didn't, how do you enable the ringtone folder?

    I have a verizon IPhone and i can't figure out how to get my ringtones from the app to iTunes, my account doesn't have a ringtone section in the liRingtone Folder?brary, how do you enable the ringtone folder?

    Edit > Preferences.  Select the check box for Ringtones, this will add them to the listing in iTunes. 
    Not sure that really answers your question though.

  • I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

    I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

    iLife is preinstalled on all the Macs. If you purchased iLife in the App Store or your computer came without DVDs, open App Store > Purchases and download the applications. If your Mac came with discs, insert the Applications DVD and install iLife applications

  • How do I enable the passbook app in ios 6.  Nothing happens when I click on it.

    how do I enable the passbook app in ios 6?  Nothing happens when I click on it.

    Yes, you do need an antivirus app for iOS. However, they don't currently exist because Apple refuses to make their 'proprietary' technical OS specifics freely available as open source code or to any Antivirus companies, who could examine and potentially identify security holes. Many security problems have been identified by Apple and fixed as part of iOS updates in the past (details are readily available in the iOS update information) and this will likely be a bigger problem in the future as malware authors move toward the technology leader as a target. But right now you can't get an antivirus app for iOS which scans the iOS device wholesale. This is despite the fact that (legitimate) apps are available which can take control of the entire device, install apps, wipe them or the device, view information, etc (for example Sophos Mobile Control). SMC can be installed by tapping an email link to a website and then tapping 'OK' to a couple of dialogues.

  • How do I enable the startup sound on Mac OS 10.2.8(Jaguar)

    Three things
    1.How do I enable the startup sound on Mac OS 10.2.8(Jaguar)
    I am using an iMac G4
    I like the startup chime of mac osx but it doesn't seem to be chiming when I turn the computer on.
    2. How do I get safari+flash player  on 10.2.8
    3. How do I update the computer (e.g. Windows update kind off thing)
    Please help.
    Cheers,
    Mittens131

    1. Make sure the volume is on. Check that the machine makes other sounds.
    2. Here is a link for Safari for a Mac 10.2.8
    http://support.apple.com/kb/HT2964
    Though I'd be surprised if it would be very useful. Things have changed a lot on the internet since that came out. An old version of Firefox might be better. I don't know where you would get an old version of flash. It is an Adobe product.
    3. There are no further updates to  Jaguar 10.2 than you already have, 10.2.8 that was the last update.

  • I disabled my Macbook  Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

    I disabled my Macbook  Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

    How do you disabled it if running the same?

  • How can i do the upload file function using tomcat library??

    how can i do the upload file function using tomcat library??

    Did you read the document for the library?
    If you can't figure it out, why don't you ask the people who provide the library?
    This has nothing to do with JavaMail.

  • How do I enable the Java Accessibilty Stuff?

    Hi. I'm trying to make my application accessible via a screen reader to impaired users. Unfortunately, I'm not having any success whatsoever. If I didnt know Java had accessibility stuff built-in, I would assume that it was just not compatible at all with screen reader technology.
    How do I enable the Java accessibility stuff so that UI components are accessible to a screen reader; they can be iterated over and get sensible names and/or descriptions of them?
    I wrote a simple application, attached below, which just makes a demo UI from which I can start learning the basics of the accessibility stuff. Out of the box, the UI is completely opaque to a screen reader (I'm using the VoiceOver utility bundled with Mac OS X, which does ok with normal applications).
    I tried setting things focusable to no avail, voice over cant cycle through the UI component using the normal keyboard short cuts, and nothing is spoken when I tab between components, despite some things having natural labels, like a menu, and some things, like the button, where i've set the accessible name and description on the accessible context of the component.
    Obviously, I'm doing something wrong or I just don't understand how the accessibility stuff works.
    Could someone please shed some light on this so that I can make my application accessible to a screen reader?
    Thanks.
        private static void try508Example() {
            JFrame aFrame = new JFrame();
            JMenuBar aMenuBar = new JMenuBar();
            JMenu aMenu = new JMenu("Test");
            aMenu.setMnemonic(KeyEvent.VK_T);
            JMenuItem aItem1 = new JMenuItem("Test Item 1");
            aItem1.setFocusable(true);
            aItem1.getAccessibleContext().setAccessibleName("Test Item 1");
            aItem1.getAccessibleContext().setAccessibleDescription("Test Item 1 Description");
            JMenuItem aItem2 = new JMenuItem("Test Item 2");
            JMenuItem aItem3 = new JMenuItem("Test Item 3");
            aMenu.add(aItem1);
            aMenu.add(aItem2);
            aMenu.add(aItem3);
            aMenuBar.add(aMenu);
            aFrame.setJMenuBar(aMenuBar);
            JTabbedPane aTabPanel = new JTabbedPane();
            aTabPanel.setFocusable(true);
            JTextArea aTab1Comp = new JTextArea();
            JScrollPane aTab2Comp = new JScrollPane(new JTree());
            aTabPanel.addTab("Tab1", aTab1Comp);
            aTabPanel.addTab("Tab2", aTab2Comp);
            JTree aTree = new JTree();
            aTree.setFocusable(true);
            JLabel aLabel = new JLabel("some label");
            aLabel.setLabelFor(aTree);
            aLabel.setFocusable(true);
            JScrollPane aScrollList = new JScrollPane(new JList());
            aScrollList.setFocusable(true);
            JButton aBtn = new JButton("Button");
            aBtn.setFocusable(true);
            aBtn.getAccessibleContext().setAccessibleName("Button Name");
            aBtn.getAccessibleContext().setAccessibleDescription("Button Description");
            JPanel aContent = new JPanel(new BorderLayout());
            aContent.add(aTabPanel);
            aContent.add(aBtn, BorderLayout.NORTH);
            aContent.add(aScrollList, BorderLayout.EAST);
            aContent.add(aTree, BorderLayout.WEST);
            aContent.add(aLabel, BorderLayout.SOUTH);
            aFrame.setContentPane(aContent);
            aFrame.setSize(640, 480);
            aFrame.setVisible(true);
            aFrame.setDefaultCloseOperation(WindowConstants.EXIT_ON_CLOSE);
        }

    Ok, so a very curious issue. If I comment out adding the menu bar to the window, ie comment out this line:
    aFrame.setJMenuBar(aMenuBar);
    The screen reader reads me back everything just like I would expect. I comment the line back in, and nothing, the application is completely invisible to the screen reader.
    Anyone have any idea what this is about?

  • I just installed Readdledocs on my ipod, and now when I launch the app, I get a screen which says "downloading message" and the app freezes and won't do anything else.  How can I get the app to function again?

    I just installed Readdledocs on my ipod, and now when I launch the app, I get a screen which says "downloading message" and the app freezes and won't do anything else.  How can I get the app to function again?
    This happened after I tried to get Readdledocs to open an epub file which I created in Calibre.

    This is a followup to my own posting above.
    Thanks to Dave Sawyer for posting information about re-downloading an app which has been deleted.  I deleted the app from iTunes.  Then, when I synched, iTunes asked me if I wanted the items on my ipod touch copied back into iTunes.  I said yes and then synched.
    Readdledocs is now working again.  It is no longer frozen.  However, I have learned my lesson.  I will download only pdf's from now on.  I don't think it works so well with epub files.  The text reflow feature of Readdledocs is exactly what I need to use for my work documents on my ipod touch.

  • In R 12.1.3 , how do I enable the who columns on OAF pages ...

    Hello:
    How do I enable the WHO columns in OAF pages in R 12.1.3 ?
    Thanks - Yesh

    Hi,
    Please post your question in "Technology - OA Framework" forum for a better/faster response.
    Technology - OA Framework
    OA Framework
    Thanks,
    Hussein

Maybe you are looking for