How do I export my iMovie '11 video and burn it to a DVD? I've tried 'Share' - 'Media Browser', 'iDVD', and 'Export Movie' but always get an error message indicating that my movie is too long to publish. Thoughts?
How do I export my iMovie '11 video and burn it to a DVD? I've tried 'Share' - 'Media Browser', 'iDVD', and 'Export Movie' but always get an error message indicating that my movie is too long to publish. Thoughts? Additionally, what does 'File' 'Finalize Project' do?
Instead of Share to Media Browser, what happens if you try Share Menu > Export Movie... (choose Large size) and save it to the Desktop?
If that fails try Share Menu > Export using QuickTime...
Then pick Movie to QuickTime Movie, then click on Options... which is just to the right of Export
Under the Video section click on Settings...
Then in the pulldown menu at the top, titled Compression Type: Choose Apple Intermediate Codec. Then click OK. And click OK again, and save it to the desktop. Once the .mov file is created, you can import that into iDVD and most likely it will work in Wondershare Creator if you prefer to use that instead.
Similar Messages
-
I am trying to upload a pdf i created to an online system but am getting an error message indicating that my document is not formatted to 8.5x11. How can i get my document to 8.5x11
You'll want to fix this via the online system you used to create the PDF.
If all content mastering and page configuration is done online then that is where you must make a correction to what you did before.
If a file is uploaded to the online system for processing then you must revisit that file.
Open the file with its native application and correct page size there.
If you upload a scanned image to the online system you must configure the scanner software to output the needed page size.
Be well... -
When I download photos from a flash drive,everything is fine and they show in Events and Pictures, but when I click on the individual pic I get an error message saying that it cannot locate the JPG. Any thoughts?
It sounds like your iPhoto Advanced preferences are set to not copy photos during import, i.e. a Referenced library:
Check your Advanced preferences to see if that's the case. If it is the best solution would be to select the checkbox to copy the photos and reimport the photos from the flash drive. Then check the new import. It it was OK you can delete the previous event with the "missing" photos.
OT -
I can't sync my iPhone movies. I have 3 movies but now I am getting an error message that says some of the items in the iTunes library were not copied becuase they could not be found. Two of the movies are from the iTunes store and one is froma movie recently purchased.
Had the same issue, found a solution.
The iTunes Store open in my iTunes was U.S. and the apps on my iPad are from Switzerland's store. So I went to iTunes Store in iTunes, then opened the App Store tab and at the bottom right of this tab clicked the round american Flag button. Changed to Switzerland, went to Store>Authorize this computer (which it did sucessfully) and after that syncronization worked great. Hope this helps -
IPhoto quit in the midst of importing some photos to the library. When I reopened it, it had some events, that were imported a few days earlier, which had no photos. They were missing. I tried Time Machine to restore the iPhoto Library to a version made a couple of hours earlier. But I got an error message saying that I did not have permission. I tried restarting iPhoto while holding down the Option key and tried to access the Time Machine iPhoto Library, but that only got me a portion of the library and not the portion that was missing earlier. When I restarted iPhoto this time, even more of my photos were missing.
Try repairing the permissions on your Time Machine, Take a look at this link, http://support.apple.com/kb/HT1452
-
Hello:
I am very much a novice with Final Cut. I am trying to import some video files from my desktop but keep getting an error message that says, "File error 1 file recognized, 0 access denied, 1 unknown". The file type is .mov, 35MB, 1920 x 1080, Codec MPEG-2 video linear PCM timecode, color profile HD (1+1+1). Can someone help? Thanks, PaulYou can't import MPEG-2 files directly to FCP X.
Can you play this file in Quicktime Player? If so, then you can use the free program MPEG Streamclip to convert this to Quicktime. Use the ProRes codec. -
I'm trying to open a 900kb Word doc (240pages) in Pages but get this error message: Import Warning - A table was too big. Only the first 40 columns and 1,000 rows were imported.
Julian,
Pages simply won't support a table with that many rows. If you need that many, you must use another application.
Perhaps the originator could use a tabbed list rather than a table. That's the only way you will be able to contain a list that long in Pages. You can do the conversion yourself if you open the Word document in LibreOffice, Copy the Table, Paste the Table into Numbers, Export the Numbers doc to CSV, and import to Pages. In Pages Find and Replace the Commas with Tabs.
There are probably other ways, but that's what comes to mind here.
Jerry -
Safari tries repeatedly to open a page. The page partially opens but then Safari reports that there's something wrong with page and I get an error message. This is happening at too many web sites for one site to be having issues.
I have a similar problem, Safari cannot load a complet page. It stalls e.g. ["38 of 42"]. sometimes it will complete loading after a long wait. just as often it will never complete the page,
The same thing happens in chrome and firefox but safari on my iPad works just fine.
I have the latest version of everything
I assume there is a system problem but cleaning up permissions does not help -
My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years
answered in your other thread LR 4 suddenly no longer recognizes files.
-
When trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?
Welcome to the Apple Community.
The following article(s) may help you.
Photo Stream ToU's -
I've had an iWeb site running for 4 months and I publish a monthly newsletter. Since August I've been unable to republish. The test connection under FTP settings works but I get an error message when I try to upload newsletter. Am I missing something?
Where are you hosting the site a what are you using to upload the site files to the server?
OT -
I can no longer back up my iphone to my computer on selecting 'sync'. I can back up to iCloud but I get an error message telling me I cannot backup to my Mac. Can any one help? It's driving me crazy!
Hello joelfromn. charleston,
It seems you are unable to activate iMessage on a device with no carrier service. The following article provides information regarding activation issues:
If you get an error when trying to activate iMessage or FaceTime - Apple Support
Check your device settings
Make sure that you’re connected to a cellular data or Wi-Fi network. If you're using an iPhone, you'll need SMS messaging to activate your phone number with iMessage and FaceTime. Depending on your carrier, you might be charged for this SMS.
Go to Settings > General > Date & Time and make sure that your time zone is set up correctly.
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D -
when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 709e, connecter wirelessly
I'm using a mac (OS X - snow leopord) and am printing over the network (wirelessly).
HP Photosmart Premium Fax All in One - C410a
I was only able to print one page and then both my printer and my computer would display an error message about the printer's inability to print. Since then I've been able to resolve my specific problem.
I
1. uninstalled HP from my computer (checked to ensure that my printer was no longer visible in my printers and the HP Utility software was nowhere to be found),
2. grabbed the software/driver update from Aug, 2010,
3. installed the Aug, 2010 update, and my problems seem to have been fixed.
This is where I got my 2010 update from (obviously you should get the driver/software applicable to your OS and specific printer):
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-85379-1&cc=us&dlc=en&lc=en&... -
I KEEP GETTING AN ERROR MESSAGE STATING THAT MY MIDI HAS TIMED OUT, HOW DO I RESOLVE THIS?
Besides not typing in all caps... you probably have Pro Tools installed, the Avid/Digi Core Audio MIDI driver is not compatible with Lion.
It has to be removed... Look in ~/Library/Audio/MIDI Drivers
Seriously, we tend to ignore Dweebs that type in all caps -
I perviously transfered all my iTunes music to an external hard drive. But now when I connect the external hard drive and try to play a song, I get an error message saying that I need to "locate" my music. I don't how to find it on my external hard drive. Please help for I am not that computer savy and don't want to mess anything up.
Thanks!I called Apple Support and they walked me through it. They told me to basically copy and paste my music to the external hard drive. (I think.) Or maybe it was they had me transfer a folder to the EHD. I don't exactally remember it was a few years back. But I tried to plug in the EHD before starting and...nothing. Still says same thing, "locate file."
Maybe you are looking for
-
The icloud backup window appeared on my ipad screen. I pressed Ok without thinking and everything on my ipad seems to have locked.And the icloud backup window won't go away.
-
Relation between tables BSEG and COEP
Hi, I am developing a report where I want to know the relationship between BSEG and COEP or COBK table is there any field or other way to know. Thanks in Advance. Regards, Kiran
-
Need informations about dependency scenario with job chains
Hi, I created several job chains containing one ora mor scripts. Now I want to create dependencies between this job chains. For example : job chain 2 must begin when job chain 1 is finished, job chain 3 must begin when job chain 2 is finished etc...
-
Transaction completing with out the process
hi all I have an SP which does Updation in table_1 and Table_2 Both having more than 8 columns where 4 columns are updating though this SP depends on the condition. My problem is i wrote this Query under transaction Block to update 4 cols of both tab
-
Anyone know about login problems with lion?
I am having problems when login screen is shown, can't type my password and the colors ball is shown. I have to turn off by getting pressed the button more than 3 seconds. After that i try again and the same occurs. After that i try again and then i