How do I fade audio in Final Cut Pro X Version 10.6.8

Hi how do I Fade audio in and out in Final Cut Pro X Version 10.6.8 ?
In previous final cut I could pin point the audio line using the pen tool cannot seem to find it in Final Cut Pro X
Please help?

just like that …
http://help.apple.com/finalcutpro/mac/10.0.6/#ver39580fed

Similar Messages

  • How do I overlap audio in Final Cut Pro X?

    Sorry, I'm totally new with Final Cut Pro X and need to do one specific thing. I'm probably missing something blatantly obvious but I've looked around on the web and inside obvious placed in FCP and haven't found it.
    I need to do this: http://support.apple.com/kb/PH2260?viewlocale=en_US
    I've looked in the precision editor, however the audio just doesn't extend. I'm hoping that I can get answers here.

    Double click the audio portion to expand the clip. Drag the audio to create the split edit. Double click the audio to collapse it.

  • How do I edit audio in Final Cut Pro 10.1.3 Trail Version?

    I'm extremely frustrated. I need to edit the audio and I can't even see the keyframes or waves. If I do put a keyframe the audio bounces. Like I set it to -10 and it slowly goes back up to 0. I am use to Final Cut 7. Please Help!!!

    You can modify the Timeline look.
    Have you checked the current settings?
    If this is not the issue try trashing the FCP X Preferences.
    Al

  • How do I revert to original footage in Final Cut Pro X version 10.0.9, for some reason I have lost some audio in my timeline and would like to start again but cannot get the original footage?

    How do I revert to original footage in Final Cut Pro X version 10.0.9?
    For some reason I have lost some audio in my timeline and would like to start again but cannot get the original footage?
    Only the edited version which is no good without the audio?
    Please  Help

    What format is your problem clip? Are there wave forms visible in the section without sound?
    Right click on the clip in the event broswer and choose Reveal in Finder; open the clip in Quick Time to confirm that there is sound throughout at that stage of your workflow.
    Russ

  • In the past when I have imported my dslr video/audio files and then my zoom audio files Final Cut Pro has organized them in pairs in my library. For some reason my video/audio and my audio are being organized seperately. How do I fix this? Thanks!

    In the past when I have imported my dslr video/audio files and then my zoom audio files Final Cut Pro has organized them in pairs in my library. For some reason my video/audio and my audio are being organized seperately. How do I fix this? Thanks!

    Thank you Russ! Seems as though the timestamp on my audio files was completely incorrect so it placed the files far away from the corresponding video. I've modified the timestamp information and this has helped. The hour/minute information is incorrect but at least now I'm in the ballpark. Thank you!

  • How to import MXF files to Final Cut Pro with smooth editing

    Summary: Follow this tutorial to learn how to import and edit MXF files in Final Cut Pro by converting MTS to FCP native format.
    If you have a Panasonic P2, Canon XF or Sony XDCAM series camcorder,
    you may be familiar with Material eXchange Format (MXF). Though MXF is a
    great video format to record high-definition videos, it is not easy to
    use in that they are not natively supported by most NLE systems like
    Final Cut Pro. In order to import MXF to FCP for editing, the easy workaround is to transcode MXF files to FCP compatible video formats.
    Along with some help from a top MXF Converter, it can be done. To
    help those who wanna edit MXF files in FCP without problems, here I
    share with you a simple guide on how to convert MXF files to edit in
    Final Cut Pro 6/7 or FCP X.
    First of all, downloading the App- Brorsoft MXF Converter for Mac
    Overall, the program is a professional yet easy-to-use MXF Converter
    on Mac (Mavericks included) which can not only convert XF100, Canon
    C300, XF105 and XF305, Panasonic P2 recorded MXF files, but also provide
    simple video editing functions for you. The MXF to FCP Converter not
    only can convert MXF to ProRes for FCP, but also can transcode MXF
    videos for editing in Avid MC, Adobe Premiere Pro, iMovie, FCE, etc.
    Just download it and follow the tutorial below to get the work done.
    Transcoding (P2) MXF files to ProRes for Final Cut Pro 6/7/X
    1. Import MXF files to the converter
    Launch the best MXF to FCP Converter, and then click the “add files” button to browse and import MXF videos from your camcorder or hard drive.
    2. Select FCP editable format
    Click the Format bar, and move mouse cursor to choose “Final Cut Pro > Apple ProRes 422 (*.mov)” as output format.
    Tips:
    a. Settings- click to set video
    resolution(1920×1080/1440×1080/1280×720/720×480), bitrate (from 1Mbps to
    20Mbps), frame rate (24p/30p)
    b. Editor (next to “Add” icon)- click to set deinterlace, trim, crop, add effect, attach subtitles, etc
    3. Start transcoding MXF video to FCP
    Click “Convert” button to start converting MXF files to Apple ProRes
    MOV for FCP 6/7/X under Mac OS. Once the MXF to ProRes 422 conversion
    is done, you can transfer MXF footage into Final Cut Pro (X) for editing
    smoothly on Mac with ease.
    Source:How to import MXF files to Final Cut Pro with smooth editing
    [quote] jacknjchn.tumblr.com/post/76914947404/cant-import-mxf-footage-to-fcp-transcoding-mxf-to-fcp [/quote]

    You may refer to this step by step guide on how to convert MXF to Final Cut Pro more supported Apple ProRes or DV at http://www.idealshare.net/imovie-fcp/mxf-final-cut-pro.html
    It also applies to convert MXF to other video or audio format. It even applies to convert other videos like AVCHD, MOD, TOD, AVI, and MPEG etc to FCP format.

  • Can I mute all audio from Final Cut Pro X?

    Can I mute all audio from Final Cut Pro X so that I can listen to music while I do sorting, keywording, favoriting, etc? I'm doing a video where all the camera audio won't be used anyways, so I don't need to hear it in FCPX.. I'd rather just listen to my music instead. Thanks.

    For clips in the timeline, andynick's suggestion works fine - temporarily disable the audio roles will play everything without audio and you just have to reenable these roles later.
    For clips in the Event Browser, you can also disable and reenable audio for a bunch of clips all at once. Select the all the clips you want, open the inspector, click the audio tab and uncheck the box (for "stereo" or "mono" or whatnot) under "Channel Configuration". Again, to reenable just check this box again.

  • Best way to adjust audio on Final Cut Pro 5 Quicktime Export?? Render files

    What is the best way to adjust audio on Final Cut Pro, Quicktime self-contained export? Please note all render files and orginals master clip are gone. So adjustments will need somehow be made to the exported Quicktime file.
    As always thanks in advance for your reading and replying to my post,
    Sebastian

    Export the aiff file out of QT Pro, and import it into SoundTrack. Sweeten there

  • How do I view fps? and how do I adjust fps in final cut pro x?

    How do I view fps? and how do I adjust fps in final cut pro x?

    The frame rate shows in the Inspector. Conform in the retiming menu of the toolbar will let you change the frame rate.

  • How to change pixal ratio in final cut pro x 10.0.0

    i have just been given a macbook pro 2012 13" i5 which has final cut pro x 10.0.0
    i cant change pixal ratio
    i have used premier pro cs6 which can easily do this by left clicking on footage then selecting interpret and changing pixal aspect ratio then select conform to anamorphic 2:1 (2.0) ...i want to do the same in final cut pro x
    i want to change a 1440x1920 to anamorphic 2:1 (2.0)
    how can i do this in final cut pro x with out croping or losing footage
    i have used letterbox plugin (2:35) but i lose the top and bottom of the footage any way i can do this in final cut pro x of motion 5/apple comppressor?
    any help would be very helpful
    god bless
    thx abdul

    Check the Tutorial:
    http://www.matthieu-jalbert.fr/capture-dimage-final-cut-pro-x-10-1/

  • Mixing 5.1 audio in final cut pro

    Hello,
    Looking for good sources on mixing 5.1 audio in final cut pro.
    Thanks,
    joe

    You don't. You use Soundtrack Pro for this.  FCP is a picture editor...not sound editor.  You need to use a sound editor to mix 5.1 audio.
    Look in the manual...best place to start.

  • How to update final cut pro newer version?

    How to update final cut pro newer version?

    Do you have Final Cut Pro X? (To check, go to the menu bar and click Final Cut Pro > About). If you don't have version 10 (X) I don't think you can update it any way other than buying it from the Mac App Store, which requires Snow Leopard 10.6.6 or later.
    It's currently $300 on the Mac App Store, which is an enormous drop from what it used to be.

  • How to import MXF file to final cut pro?

    how to import MXF file to final cut pro?

    Directly or XDCAM transfer depending on camera according to this:
    http://en.wikipedia.org/wiki/Material_Exchange_Format
    If it doesn't work, I'd ask the question on Final Cut Pro forum, being sure to mention which version of Final Cut Pro you are using. 

  • Audio from Final Cut Pro very very low

    Hi guys I have not have a problem for awhile. A friend of mine recently move from DPS Velocity system to Final Cut Pro Studio 2 using a Intel Pro 3.2GHZ with all the bell and whistle, so I am giving him some training and tutorial. They have some footage in Velocity which I use MPEG StreamClip to convert to a DV file, I brought it in FCP (Three File one video and two audio makes one clip) it play in FCP Played ok when I export it to DVD studio Pro the audio is extremely low (barely audio able)I open the clip in QuickTime and it did not play. There is other clip in the project, some capture in FCP and others imports in FCP Studio, DVD Studio Pro and QuickTime plays these audio ok. The audio from Velocity are Wave files, I taught anyfile that plays in FCP would play in QuickTime. Does anyone knows how to solve this problem please to help I would like my friend to change both system to Apple and FCP thanks.

    Wellcome to the forums!
    when I export it to DVD studio Pro the audio is extremely low (barely audio able)I open the clip in QuickTime and it did not play.
    I guess you encoded it to Dolby AC3 with Compressor, did you? Then you must chamge the standard Dolby preset as follows to keep the original FCP mix and level:
    - Dialog normalization: -31
    - Compression preset: none
    And QT cannot play AC3 files.
    Hope that helps !
      Alberto

  • Exporting audio from Final Cut Pro

    ok I have my film clip in a project in final cut pro, it is an interview, and I want to export the audio part allowing me to work with the audio in Logic 9
    how do I export the audio please>

    File>Share>Master File and in the window that opens select Settings.
    Then in the Format section select Audio Only from the drop-down menu and also choose the audio format otherwise it will default to AAC.

Maybe you are looking for

  • Video Card for Photoshop CS5

    Hi, I'm deciding between these two cards (I do not want to spend more than 70/80 bucks as I might be selling the PC in some time): http://www.amazon.com/GeForce-ENGT430-DC-SL-1GD3/dp/B0051UWKUW/ref=wl_it_dp_o_npd?ie=UTF8& coliid=I3KL9BC6YWAB99&colid=

  • Creating a JSF Web application from scratch.

    hi, i have created a JSF web application, but not from scratch i had to use a jsf example included in the final specification of the JSF download, as a template to create my own application, by deleting and editing the example files with my own. i tr

  • Fact to Dimension ratio

    Is there a t-code to check Fact and Dimension table ratios other than doing an RSRV check? Thanks

  • Converting flat table to a parent- table

    Hi, I have a flat table with P&L and Balance sheet accounts . The table structure is as follows - Lvl1 Lvl2 Lvl3 Lvl4 AccountID AccountDesc There are null values as well in all levels Lvl1 determines whether the levels below belong to P&L or balance

  • I want to insert an image among text... how can I ?

    Nice day webmates : I am trying to insert a small logo in between text... so that if for example I type something like this : This text is for example on behalf of my [LOGO] because I need that [LOGO] be displayed here as an image.. How do I do that