How do I find and use the Firefox Identity Finder feature?

On a web page that compares various Web browsers, the following narrative describes a Firefox 5.0 feature called Identity Finder:
"Once Identity Finder has secured all exposed private data, a laptop thief or spying Trojan won't be able to steal your identity."
I am running Firefox version 5.0.1.
Thanks,
DDOcean
[email protected]

Hi,
I'll start with the most basic qusetion if you have Spot selected from the dropdown in the Lighting Effects Properties.
There are also some presets under Presets including a Default Setting.

Similar Messages

Is there any way to disable Quick Find and use the old VS 2010 find?

I really dislike the Quick Find dialog. It's one of the few tools from the VS 2010 Productivity Pack that I always disabled. It looks like they've forced it on us with 2012 though, so I'm wondering if there's a way to disable Quick Find and use the old
style Find dialog?

I wish the VS2012 devs would realize just how badly the Quick Find tool slows me down. It's poorly labelled, does a full search immediately after every single keystroke, and doesn't default to whatever's highlighted in the code when invoked. It
makes me feel like I'm the only one who uses the product.
I agree with ElectricNinja and
Disable Quick Find in VS 2012
The quick find is terrible, and was one of the few tools that I'd disable in the 2010 pack. wish there was a way to return to the good old normal find.

How do I find and use the "Spotlight Effect" in PS6?

How do I find and use the "Spotlight Effect" in PS6? I was using it yesterday and now I can find it ... help!

Hi,
I'll start with the most basic qusetion if you have Spot selected from the dropdown in the Lighting Effects Properties.
There are also some presets under Presets including a Default Setting.

How can I access and use the alphabetical keyboard of the phone ?

How can I access and use the alphabetical keyboard of the phone ? I cannot find the answer in the manual of use. Thanks for your help !

Recently I was abroad and tried to contact my voicemail to check my messages. I was asked to enter a password and did not know how to use the letters below the figures on the keyboard. I had to give up and wait until I was back in my country (no password is then needed).

How do I import and use the Keynote themes that I've downloaded?

I'm sure this is a stupid question, but I searched this forum & didn't immediately find the answer I needed. I've downloaded some Keynote themes (they have a .kth extension). How do I import these into Keynote 08 so that Keynote will recognize and use the themes?
Thanks!

Put the .kth in "Themes" folder under the route Home > Library > Application Support > iWork > Keynote > Themes - it will then appear (at the bottom) in the theme chooser when opening keynote.

How do i launch and use the apps i download on my mac pro?

how do i launch and use apps i downlaod on my mac pro?

ug.betty wrote:
.. pro tools ...
Have a look here > http://www.macprovideo.com/tutorials/pro+tools-suite

HT4623 what do i do if some one got my apple id and used the i phone finder app to re set my phone track me down and put my phone on lock mode

someone has broken into my i phone with the i phone finder app re set my phone put ti on lock mode and track me what do i do

You can erase your phone. That's really your only option. You can reboot it while holding down the home button and it should go into DFU mode.
You also must reset your Apple ID password. Hopefully you have a good backup, and you should use better passwords and/or get better friends.

How can I display and use the full RAW file?

Hi,
my camera (Canon S95) has a sensor with 4:3 aspect ratio and thus saves all RAW files in this format. Additionally, the camera can automatically create JPGs with a cropped ratio (e.g. 3:2 or 16:9). This is very helpful because you can see the target format already on the camera screen (with black bars on top and bottom), which helps the composition. However, when processing the photos on the big screen afterwards, it often also helps the photo to adjust the ratio a little bit and therefore use the additional information saved in the bigger 4:3 RAW file. This works very well with many of the freely available software tools.
The problem found in Lightroom is now that it only shows the RAW photo in the cropped format and up to know I have found no way to display or use the full RAW format. So my question is: Which settings do I have to change to use the full format? What do I need to change?
Searching a little bit on the web I found many other photographes having the exactly same problem with many different cameras. However none of them reported to have a solution for this. Still I am pretty sure that there must be a solution, since otherwise this would be a really heavy bug within Lightroom and I cannot imagine that Adobe would leave this matter unsolved.
So I would really appreciate if someone could help me with this.
Many Thanks
Martin

Hi Jao, Victoria, Lee Jay,
Thanks for clearification. Do you have additional information about when this fix will be available and whether at least some popular old cameras will be supported?
What I do not get is why Adobe would need to redo all existing cameras. I think this is a more general issue, where Lightroom misinterpretes the exif data which includes both the exif image height/width as well as the cropped image height/width. Intepreting this information correctly, any software should be able to display both - the full image and the cropped area (as shown by many cheap or free software tools). In the internet I found another workaround for the issue in Lightroom, which is undermining this point: When setting the cropped image height/width to the numbers of exif image height/width manually (e.g. with exif tools), Lightroom actually is able to display the full 4:3 picture.
So this bug should be easily fixed for all cameras and I have no clue why Adobe still has no fixed it with Lightroom already available in version 4.2.
Cheers
Martin

FCproX Trying to find and use the Audio Animation Editor

I put the playhead at the point I wanted the audio/music to go under a sound bite and hit option K and nothing happened. What do I need to do? Thanks!

Hold down the option key and click the audio volume control line in the audio part of the timeline.
A keyframe will appear at that point.
You can make as many keyframes as you want this way and drag them up and down to achieve the desired effect.
You don't need the Audio Animation editor.

I have a G4 MacBook Pro and I just updated Firefox; it will not load the new Firefox and gives me an error code 10661; how do a load and use the new updated Firefox?

I am currently using Firefox 3.6.9
My operating system is Mac OX 10.4.11
I have downloaded the most recent update for Firefox and it won't load.
How do I load this recent update?

See also:
*http://kb.mozillazine.org/Firefox_crashes
*http://support.mozilla.com/kb/Firefox+crashes+when+you+open+it
Do a malware check with some malware scanning programs. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan. 
 
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

How to uninstall Inquisitor and use the updated AcidSearch (in Leopard)

Title says it all I think - I loved AcidSearch - enough that I didn't use Safari 3 (beta) in Tiger because it killed AcidSearch and when I migrated to Leopard I missed it dearly and have been getting by unhappily with Inquisitor. Now there's a new AcidSearch and it's installed but my search tab is still controlled by Inquisitor - which I can't remove.
The two ways to remove it that I've found while googling are running the install app again and clicking 'uninstall' - however that isn't an option - it just installs over the top over and over - or by removing it from the Input Managers folder in Library - but that's seemingly a Tiger-only folder now and there's nothing Inquisitor-related in it...
I guess the other question I have is actually which is better - I only just now realized I can add search engines to Inquisitor - so that might make it very functionally similar to AcidSearch. I don't have very fast broadband, so I feel the predictive element of Inquisitor is useless.
Any thoughts on which is better and/or how to uninstall Inquisitor (so I can choose!) would be greatly appreciated!

Hi Alex,
I just installed it to see where it places files, and the only place the latest version seems to install anything is in Hard drive -> Library -> Input Managers.
It also (annoyingly) renamed my users Input Managers folder to what you have, i.e. Input Managers-Tiger (I have Cocoa Gestures in there, which was working just fine Mr InquisitorX developer...)
After deleting the Inquisitor bundle from the top level Input Managers folder and restarting Safari it appears to have gone.
What version were you using before? Have you tried downloading the same version from versiontracker.com and seeing if the uninstall in that version works?

My M-Air start up disk if full; I have the a new time capsule, how do I transfer and use the TC as my main storage drive?

The start-up disk on my MAC AIR is full - I just added a new Time Capsule - how do you transfer your files from the AIR to the TC and set it up to be used as my primary storage disk - not my Mac Air

Get a second external drive, drag both the iTunes library and the pictures to it, launch iTunes with the Option key held down, and point it to that instance of the library. This also works with iPhoto, but see below.
A drive or partition needs to be formatted as Mac OS Extended in order to hold an iPhoto library or for Time Machine to back it up.
(83755)

How do i install and use the lacie hard disk

i bought the 1TB Lacie Rugged Hard Drive because I have run out of disk space on my Mac desktop. Once I plug it in, I can't seem to format it for the Mac and then use it to transfer my iPhoto library from my desktop to the Lacie Hard drive. Please help! Thanks.

I went into Disk Utility and into Erase and selected Mac OS Journaled and hit "Erase" (I hope that wasn't a big mistake.)
... it was only a mistake if the LaCie drive has multiple partitions on it. Sometimes they have a utiliy partition that I like to remove.
Then when asked whether I wanted to use Time Machine to back up everything on my Mac, I hit "yes". (I hope that wasn't a big mistake.)
... it was only a mistake if you didn't want TimeMachine to use it.
So now the Lacie image on my desktop has turned from orange to green (Time Machine?) and is backing up 700,000 things. . .I just want to free up space on my Mac so I was thinking of moving my iPhoto library from my Mac over to the Lacie Hard Drive. Will I be able to still do that, given what I just did above? If so, do I just drag the iPhoto library icon onto the green (Time Machine?) icon on my desktop?
... if the LaCie has enough space this should be fine. You might run into problems later when TimeMachine starts to fill up your drive; iPhoto might start giving you errors if there isn't enough freespace.

My sites have been hacked and hostgator has told me to "Disable javascript - Use the firefox addon noscript" and I don't know how to. Are all updates always sent to me as that was another point made to prevent hackers? Thanks you. David. in English

What are malicious scripts and what causes them? Over the years hackers found it hard to trick people into visiting suspicious sites so they're now targeting legit sites and using them to infect unknowing customers. In most cases an FTP account's password is obtained through key logging malware, then legit website files are modified to distribute the malware and gather more passwords. If your PC has been infected with one of these trojans, your bank account, email accounts, and FTP accounts may no longer be secure. * What to do if you find malicious scripts 1. Use the following online vulnerability scanner and ensure your software is up-to-date: http://secunia.com/vulnerability_scanning/online/?task=load 2. Download antivirus and fully scan your PC for malicious files. Here are some free online scanners: http://housecall.trendmicro.com/ http://www.bitdefender.com/scan8/ie.html http://www.kaspersky.com/virusscanner http://support.f-secure.com/enu/home/ols.shtml 3. Update all passwords that may have been obtained. Do not use old passwords, generate new ones. 4. Upload older versions of the files or contact support for assistance removing the malicious scripts. * Prevention - Ensure you use the latest browser version - Disable javascript - Use the firefox addon noscript - Download and install some free antivirus software, make sure it stays updated - Use http://www.avg.com.au/index.cfm?section=avg&action=onlinescan to test suspicious links you are given in emails or find online. If you are seeing a Google Attack Page when you visit the site, use the steps below to request that Google reindex the site and hopefully remove this block. This excerpt was copied from the URL below, and provides step by step instructions to request a delisting. http://www.google.com/support/webmasters/bin/answer.py?answer=45432 Once you have reviewed your site and are sure it is clean, you can can submit a request for review. Note that you'll need to verify site ownership before you can request a site review. 1. Sign in to Webmaster Tools with your Google account. 2. On the Dashboard, select the site you want. 3. On the Overview page, click Request a review and follow the instructions. Best regards, Tyler Evans Network Security Administrator HostGator.com LLC http://support.hostgator.com

Thank you.
I also had tried other means of getting answers and got an even more specific answer on just how to do this. Below is the link to the actual knowledgebase article giving specific instructions since there are some files that need to be on the Palm and some on the card, etc.
http://support.laridian.com/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=380&ratingconfirm=...
I emailed Zondervan to see if they might be able to direct me to a downloadable manual. The referred me to laridan.com who now supports their software.
I followed the instructions, taking into account some things that were already where they needed to be, hot synced it and it seems to be working fine with 7.8 M free space on my Palm which I trust is enough for my other very large applications.
Thanks for your help!
Post relates to: Tungsten E2

I updated to Firefox 4.0.1 and can no longer use the thumb/finger spreading feature on the trackpad of my Mac Powerbook (Mac OSX 10.6.7) to enlarge text on websites. How do I restore this function?

I updated to Firefox 4.0.1 and can no longer use the thumb/finger spreading feature on the trackpad of my Mac Powerbook (Mac OSX 10.6.7) to enlarge text on websites. How do I restore this function?

* [/questions/777886]
Some gestures have been removed in Firefox 4.
You can restore the zoom feature by changing the values of the related prefs on the about:config page.
browser.gesture.pinch.in -> cmd_fullZoomReduce
browser.gesture.pinch.in.shift -> cmd_fullZoomReset
browser.gesture.pinch.out -> cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift -> cmd_fullZoomReset
browser.gesture.pinch.latched -> false
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
You can use the Filter bar at to top of the about:config page to locate a pref more easily.

How do I find and use the Firefox Identity Finder feature?

Similar Messages

Maybe you are looking for