How do I fix an exporting issue?

I was working on a project, editing the final credits, when Premier Pro froze. I was able to restart but then every time I opened a project the titler windowed opened at the start also. I finally had to reinstall the entire program. The titler problem is fixed but I still can't export with Media Encoder.
I am able to export by clicking "movie". When I click to export through Media Encoder, it shuts the project down. Any suggestions. Thanks.

Please re-post this in the PP forum. You'll get far more attention there.
Bob

Similar Messages

How Can I Fix The Graphics Issue...?

After having my computer for a few years, it started getting an artifact around the mouse, and when it did that, everything was frozen, key commands didn't work, and I would have to manually shut it down.
I went to the Apple store, and they couldn't get it to boot, even with their external drive. The guy at the Apple store took my computer into the back, and a few minutes later, brought it out. He said he had gotten it to boot, without their external drive, but wouldn't tell me how. He said there was a problem with my video card. He said $400 to fix it.
Not having the money, I left. A friend told me how to safe boot the computer, and now it will turn on, despite the artifacts and graphics problems. Why didn't the guy at the store tell me this? It's obviously the only way he could have booted it. He wanted to charge me $50 to back up my data, when I could do it myself under the safe boot.
The thing is, when using safe boot, I have no audio or video functionality- the camera doesn't work, the speakers don't work, and the disc drive doesn't work. I've read up on this, and it's an issue for a lot of macs, from about the time I bought mine. They say there was too much glue used somewhere in the computer (2 or 3 little chips with too much glue or something), and over time the glue/ adhesive gets too hot, and spreads to other areas and ruins them (ie. my graphics card). That's my simplified understanding of the issue, anyway.
Why won't Apple replace it for me? They won't let me trade it in, because it won't boot right, but this is an issue they were aware of at some point. I spent a lot of money on this laptop and it's really nothing more than a digital typewriter now.
Does anyone know how I can fix the graphics issue? Aside from shelling out the money I don't have for something that's really Apple's fault? It'd be really nice to be able to, I don't know, watch things and listen to things. That was the whole reason I got this thing.
Thanks for any ideas, feedback, sympathy, empathy or other comments.
<Edited by Moderator>

Ok, you are right, maybe I don't know it for a fact . . . but from all the things I read in various forums, there was a batch (or something similar) of macs (the exact kind I have) that did have too much glue on some parts, and it caused all sorts of problems for different people, most of those problems being with the graphics card. Apparently the excess glue overheats and leaks out of where it's supposed to stay, and whatever it has the misfortune of getting on goes to pot.
I got very brave, thinking my computer was shot- I opened it, and there was, indeed, crusty glue coming out from under some ... things ... three square chip like things ... and it had seeped onto the edges my graphics card. Having seen the inside of other laptops, I know it was not supposed to look like that no matter how old it is.
This whole issue happened just a few months after my (overpriced, unused) AppleCare expired. Irony?
I did backup all my data and files (no thanks to the Apple people; and on safe boot the disc drive won't work, so I had to borrow my friend's external hard drive for backing up), and did a clean install with the original discs. It was a huge hassle, and when it was finally done, I booted my computer normally. It worked for about 10 minutes before it got artifacts all over and froze, at which point I had to force shut it down. I've tried the clean reinstall a few times, but the problem (I think) is that the glue inside already did the damage, and my graphics card is shot. So, I've been running it on safe boot for months. No music. No video. No disc drive. OH- and the best part- on safe boot, the airport won't work. I can't use wi-fi, and I can't take my laptop anywhere because I'm tethered to a modem. It's the worst thing ever. All of it. It's horribly depressing.
I'm just really frustrated and irritated that this happened, and Apple won't do anything. I do realize they don't HAVE to do anything- buyer beware and whatnot- BUT as a reputable company they should at least let me trade in with the discount or whatever. I didn't have to choose Mac, it was the most expensive computer I looked at- but it has so many awesome functions and things . . . that I can't even use . . .
As a poor college student I don't have the option to get a new computer or have Apple replace any parts in this one, so I just kind of feel like Apple screwed me over. Their fault? Maybe not. Their product? Yes, so they should want to keep me as a future customer. At least I think so.
I guess this isn't quite a question. But I would love more feedback, ideas, anything. Has anyone else had this problem? Can I replace my own video card? Will Apple do anything at all? I love macs but I might never get another one, since this could happen again.
And- unrelated- who changed the title of my post, and how, and why?

How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?

How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?

This is a typical response from the manufacturer. Did you try the fix that Lawrence mentioned. When Apple or any other phone manufacturer update phone software, they have the latest Bluetooth installed. It is usually the problem with the radio manufacturer that they devices are using the older Bluetooth protocols. You can try this support document http://support.apple.com/kb/TS3581 and see if anything there helps, but generally it requires the radio manufacturer to update their firmware.

How do I fix Mountain Lion issue after login where Keychain Access attempts to open, hanging up with "application not responding" message?

How do I fix Mountain Lion issue after login where Keychain Access attempts to open, hanging up with "application not responding" message?

You could try booting into Safe Mode to see if that will help. And "Repair Permissions" in Disk Utility.
Have you got Keychain set to open on Login or is it attempting to open on it's own.

How do I fix the buffering issues with the radio app?,

How do I fix the buffering issues with the radio app? When I try to listen to the Hay House Radio station it buffers quite a lot for no apparent reason sometimes. I have not been able to find any settings to adjust this. Does anyone know what I might be able to do to modify this problem?

msbroome wrote:
How do I fix the buffering issues with the radio app? When I try to listen to the Hay House Radio station it buffers quite a lot for no apparent reason sometimes. I have not been able to find any settings to adjust this. Does anyone know what I might be able to do to modify this problem?
What is your Internet data rate?

How can i fix this wireless issue?

My problem is, few days now my wireless router either not showing my SSID or give me Worst signal even though im far from it like 5ft.,it sometime load fast then right back slow.
but when i run a speed test on verizon website i get a decent
21Mbps download and 15mbps upload
and this happen to almost all my devices, tivo, iphone, xbox360 and laptop.
how can i fix this problem.
this is the first issue that i have with this router.
Im currently using a
Firmware Version: 20.10.7.5 Model Name: MI424WR-GEN2 Hardware Version: E
Solved!
Go to Solution.

Ptnguyen wrote:
My problem is, few days now my wireless router either not showing my SSID or give me Worst signal even though im far from it like 5ft.,it sometime load fast then right back slow.
but when i run a speed test on verizon website i get a decent
21Mbps download and 15mbps upload
and this happen to almost all my devices, tivo, iphone, xbox360 and laptop.
how can i fix this problem.
this is the first issue that i have with this router.
Im currently using a
Firmware Version: 20.10.7.5 Model Name: MI424WR-GEN2 Hardware Version: E
change the wireless signal. you can do that in the router.   open a browser, and go to http://192.168.1.1
user name is admin. and the password is most likely the serial number found on the service tag of your VZ router unless you changed it.
}Once you login succesfully, go to the top and hit wireless, then on the left basic security.   then go to option 3 which is channel
1, 6 and 11 and are the only channels you should try.
So it will likely be set to auto, change it to 11 and put the check for keep settings even after reboot (Directly under the channel) and then hit apply.,
after you hit apply, test your connection out, if you notice a difference, leave it like that until the problem happens again, and if it happens again, go back into the router, and try channel 6,     test it out. and then finally 1 if the first two don't work.
Also take a look at page 2 of Actiontec's Wireless PDF File. It gives you some idea's with regards to position and orientation of where the router sits and how it can best be positioned for maximum coverage.

How can i fix an update issue between iTunes and my iPod Touch

I've recently found my iPod Touch's cable that plugs into the usb drive of my computer. I Downloaded the latest version of iTunes onto my computer, but my ipod hasnt been updated in a while, and when i plug it in, an error pops up in itunes saying I need to unlock my ipod touch in order to sync it. I cannot do this, because when the ipod is turned on/plugged in the only thing that shows up is the image of the ipod cables usb end with an arrow pointing to the itunes logo. How can i resolve this issue and fix my ipod touch?

You need to place the iPod in recovery mode and then restore the iPod via iTunes on its syncing computer. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

How can i fix iphone4s battery issue? Gets drained in just hours...

My iphone4s battery gets drained very quick...mi just bought it 5 days ago...

i faced the same situation but after searching over internet i'v found the solution to fix my battery life.
I hope this wil help you and every one who faces same battery drain issue
solution:
settings>general>date and time>set automatically>turned off. that's it.
set manually your location.
he solves the battery drain issue for me now i am 7hrs standby on 92% battery indicator.
form this video i got the solution
How to dramatically improve Iphone 4S Battery Life
http://www.youtube.com/watch?v=F-Sc091sDbU&feature=related

How do I fix the connection issues on my iPod Touch 4th generation to connect to iMessage?

I am getting very frustrated with this iPod Touch 4th generation. I have been using my 2nd generation iPod Touch to use iMessage to text people and use as a 'fake iPhone' because carrying around my cell phone and iPod is annoying.
Basically, I have tried multiple times to change the DNS on every network to the google public server (8.8.8.8) and this does not work.
I attempt to sign in to my Apple ID on iMessage and it says "iMessage Activation: Could not sign in. Please check your network connection and try again." Even though it claims I cannot connect to the internet, I can connect and browse on Safari and other Apps, but iMessage (also Facetime) will never connect or let me sign in. I continually receive that error message that I need to check my network connection. I just don't understand why. iMessage will work on my iPad 3rd gen and my iPod Touch 2nd gen, but not my iPod Touch 4th gen.
I am using my college's WiFi network and it is hit and miss in my building, but both my iPod touch 2nd gen and iPad 3rd gen can receive iMessages and everything fine. I am starting to think that the 4th gen ipod touch just has a crappy wifi receiver or something.
PLEASE help me fix this. I don't know what else to do.
I just updated to iOS 6.1.2 and that did not fix it either.

I know this question is no related directly to your topic, but I wanted to know how did you get imessage in ipod touch 2g. I have one but it doesn't have imessage. I will appreciate your help. Thanks in advance.

How do I fix the toolbars issue I'm having whenever I open Firefox 4?

EVERY time I open Firefox 4, the entire window flashes black, and the only way to stop it is to right click on a toolbar (between a flash) to bring up the menu and check or uncheck to view one of the toolbars.
On my PC, I had the same problem but I thought I fixed it when I reset my toolbars. I've reset my toolbars a few times on my notebook, with no success. The issue occurs even in Safemode, with all addons disabled and settings reset.
I'm at a loss. What can I do to fix this?

A new profile does not fix the issue. And before I reinstall Firefox I just thought of something. When I do the temporary fix of checking or unchecking a toolbar the new Firefox button disappears, no matter which toolbar I select. Could the button be the reason for the flashing?

How do I fix an exporting error?

I was working on a project, editing the final credits, when Premier Pro froze. I was able to restart but then every time I opened a project the titler windowed opened at the start also. I finally had to reinstall the entire program. The titler problem is fixed but I still can't export with Media Encoder.
I am able to export by clicking "movie". When I click to export through Media Encoder, it shuts the project down. Any suggestions. Thanks.

Please provide these details to help us help you.
Cheers
Eddie

How do I fix this iTunes issue???

I store all my media on an external drive that I have networked. I have gotten rid of the local copy iTunes keeps on my macbook because it was taking up too much space. Now I'm trying to put everything back into iTunes from it's network location and I get the spinning beachball. It's making me crazy because I NEED TO FIX THIS!!! Has anyone had this happen and know how to fix??

Take a look at this guide >>
http://www.apple.com/itunes/inside-itunes/2011/02/how-to-move-your-itunes-librar y-to-another-hard-drive.html

How can i fix audio playback issues?

I have uploaded 3 cds to itunes this weekend and only one will play clearly. The others are all fuzzy. Any idea how to resolve this? I ticked the box to fix errors but still the fuzziness is there.

The computer may be lagging. Does this occur regardless of whether you use the trackpad or a mouse?
Run this program and post the output in your reply:
Etresoft: EtreCheck

How do you fix redirecting page issue?

Every time I click any links like coolermaster.com links at Google search engine box, it redirects me to random website. So, how do you prevent this redirecting page issue? It pisses me off! Also, I have installed Redirect Remover add-on, and it doesn't help prevent redirecting me to some random websites; even though, I hate it and it just irritates me! Please, help resolve this issue.

I got caught by this bug toady while make a Facebook Page Tab. Many users of Facebook (including me) use it over https and the jQuery included by Muse prompts a insecure message in Chrome.
I suggest that the engineering team use the protocol agnostic version of the script tag and sets up a cdn on the worldsecuresystems.com domain. It will use either http och https depending on your connection.
<script src="//musecdn.worldsecuresystems.com/scripts/1.1/jquery-1.7.min.js" type="text/javascript"></script>
Eagerly awaiting the next version of Muse =)

How do I fix .mov export errors?

I'm a flash newbie. I bought flash to create animations. So far they play fine as a swf, but when I export as a .mov file it leaves traces of tweened symbols and looks really ugly!
See my test example below, error is about 4 secs in on car and sun. Please tell me what am I doing wrong? I know it works for other people!
http://www.youtube.com/watch?v=_8d_68tMSDw

Thanks heaps for replying, I really appreciate it! That's great that it worked for you!
So far it works fine exporting from fla to swf, html, and even jpg sequence. Exporting to gif makes for some ugly colours, and didn't seem to animate it, but that might be my viewer? But I need to insert my animations into an imovie (& also for youtube), so swf & html are useless for me. I've read online some users have resorted to using screen capture software! I tried that but needed to crop it, which I attempted in After Effects but After Effects only offers export to swf - so no good.
I haven't tried creating an animation exactly the same length. I have created some shorter and some longer. All with the same type of errors. It seems the more moving parts the more likely it will leave traces behind.
Because I'm new at this I've been using the template: Sample files: Ik stick man sample. Even when I export Ik Stick Man sample straight, without editing it whatsoever as a .mov, it has bad errors. The lip sync template has a barely noticeable hang (but again less movement). Other sample file templates like handwriting & perspective zoom export fine without errors, so could it be the template? or the type of movement within the template?
Not sure if I've answered your questions...if it is a problem with the way my movies are being created and published, how do I get around that?
Thanks again for your time!

How do I fix an exporting issue?

Similar Messages

Maybe you are looking for