How do I fix my screen display? It scrolls vertically and horizontally

The screen on my 21.5 inch imac scrolls up and down and side to side instead of a static resolution. The display resolution is set to 1920 X 1080 on my imac.
This glitch is really annoying but I don't know what to do. Help!

Hi, Tracie -
Also, check in Apple menu > System Preferences > Universal Access. If Zoom has been turned "on", try turning it "off".

Similar Messages

  • I fainted and fell while holding my iPad and the screen cracked; it still works fine. It's just cracked. I have had this iPad for less than a year so it is still covered under warranties. Does this apply? If not how much to fix the screen?

    I fainted and fell while holding my iPad and the screen cracked; it still works fine. It's just cracked. I feel horrible, it was a gift from my brother. have had this iPad for less than a year so it is still covered under warranties. Does this apply? If not how much to fix the screen? Please help

    If you want a short list of third party repair options, here you go.
    iPad Repair & Screen Replacement Services
    http://www.ifixyouri.com/16-ipad-repairs
    RepairZoom iPad Repair
    http://www.repairzoom.com/ipad-repair.html
    Mission Repair
    http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
    iGadgetResQ
    http://www.igadgetresq.com/ipad-repair/

  • HT3743 how do i fix the screen of death on my ipod.....please helpm asap..........my sister is going to kill me

    how do i fix the screen of death on my ipod

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • How can I fix corrupted audiobooks category--plays too fast and is gravelly?

    How can I fix corrupted audiobooks category--plays too fast and is gravelly? Other music categories are unaffected..

    On the audio book (and podcast) playing screen there is a playback speed selector. It is the box on the right hand side of the screen right below the scrubber bar. It say either 1/2X, 1X or 2X, the playback speeds. Tap the box to cycle through the playback speeds.

  • My iphone 5 is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and it won't recognize it or anything. what can i do?

    my iphone 5 is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and it won't recognize it or anything. what can i do?

    Turn it off by holding home+ power button untill the screen goes black ( as soon as it goes black, release the buttons).. This might take some practice , so dont worry if on the first try your phone reboots and goes to itunes screen again.
    Now, with your phone powered off, enter DFU mode:
    Method 1)
    Attach the phone to the pc
    Turn the phone off
    Hold power and home together for *exactly* 10 seconds
    Release power but keep holding home until the pc beeps as a USB device is recognized.
    Whilist in dfu mode, itunes will recognize the device and it will ask you if you wish to restore it. Simply click restore, and the restoring proces will begin.
    This will hopefully fix your iphone.
    Cheers

  • Out of nowhere my daughter, who uses a Samsung Galaxy Victory phone is no longer receiving my text messages but I get hers.  How can I fix this.  I have a 4S and have updated to the 1SO7.

    Out of nowhere my daughter, who uses a Samsung Galaxy Victory phone is no longer receiving my text messages but I get hers.  How can I fix this.  I have a 4S and have updated to the ios 7.0.4.

    http://support.apple.com/kb/ts2755
    if the link provided doesn't help, then you will need to contact your phone carrier as SMS is a carrier feature.

  • My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my

    My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my phone on my computer it would begin the processes then half way through it would say IPHONE has been disconnected, now it won't recognize it or anything. what can i do? This is a brand new phone!!!

    Hello jraff21,
    I was able to locate a support article for the error you mentioned. The following steps may help you get your device back to working order:
    iOS: Restore errors 4005, 4013, and 4014 - Apple Support
    You may see one of these messages if the device unexpectedly disconnects during the update or restore or iTunes couldn't tell the device to go to the restore state.
    The iPhone [device name] could not be restored. An unknown error occurred (4005).
    The iPhone [device name] could not be restored. An unknown error occurred (4013).
    The iPhone [device name] could not be restored. An unknown error occurred (4014).
    Try these steps to resolve the issue:
    Install the latest version of iTunes.
    Restart your computer.
    Make sure your computer is up to date. If an update requires a restart, check for updates again after you restart.
    Restore using another USB cable.
    Learn more about updating OS X.
    Learn more about updating Windows.
    Restore your device on another computer.
    If you continue to see error 4005, 4013, or 4014 when you restore your device,contact Apple for support.
    Learn more about other update and restore errors.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • How do I fix the timeline so both the images and the timeline are 1080p?

    Hello everybody. I'm a relative newbie to FCP, but not totally new to the world of video editing. I've got a problem that I hope somebody out there can assist me with.
    I've shot a lot of footage in HD (1080p) and have imported everything into a timeline. I've performed all my edits, transitions, music integration etc - now when I go to output the footage I realise I've made the mistake of doing everything in a 576p timeline.
    I've figured out how to resize the timeline, but all the clips appear in their original 576p resolution in the middle of the canvas (ie huge bars around the image)..
    My question is simple enough.. How do I fix the timeline so both the images and the timeline are 1080p? Is there a method to 'resize' all the clips to the new timeline? Will this resize the 576p clips or will they still be native 1080p?
    If importing all those clips into the original timeline has destroyed pixels, then resizing to 1080p is definately not what I want to do. I want to retain all the resolution of the original clips.
    Any advice would be very much appreciated. I've created nearly 300 edits in this timeline, not including all the effects and transitions. If I have to redo all this because I set up the timeline incorrectly I'm going to be rather upset!
    Thanks everybody.

    If you captured the footage as 1080 then the fastest way to re-size all the clips back to 1080 is to select all the clips on the time line and then in the menu bar go to Edit -> Remove Attributes. This will pop up window asking which attributes you want to remove. I would try checking the Basic Motion and Distort attributes and click OK. This should pop everything back to their original size and shape.
    However, this will also remove any re-sizing or distortion that is intentional (ie to blow up a particular clip so you can focus on something).

  • When i turn my phone horizontally, the photos/text to not re-orient (they remain vertical) .  How can I fix this?, when i turn my phone horizontally, the photos/text to not re-orient (they remain vertical) .  How can I fix this?

    when i turn my phone horizontally, the photos/text to not re-orient (they remain vertical) .  How can I fix this?, when i turn my phone horizontally, the photos/text to not re-orient (they remain vertical) .  How can I fix this?

    It is possible that you have the rotation lock on? Check this:

  • How can I fix my search engine? Google, Yahoo and Bing doesn't work.

    How can I fix my search engine? Google, Yahoo and Bing doesn't work. I try to change them and they doesn't work. Its there a way to fix this problem?

    Power off the router. Unplug it from the wall. Wait for few  minutes.
    Power off the router. Wait a while.
    Connect the router back to to the wall.
    Power the router back on. Wait  until all lights are lit properly. It will take a while.
    Restart the computer.
    Start up in Safe Mode.
    http://support.apple.com/kb/HT1455

  • Im using an iphone 4s with the latest firmware which is 6.1.3 but my wifi button keeps going grey how can i fix it? i rested network connections and it worked for a while and went grey again,what can i do?

    im using an iphone 4s with the latest firmware which is 6.1.3 but my wifi button keeps going grey how can i fix it? i rested network connections and it worked for a while and went grey again,what can i do?

    Have you worked through the Troubleshooting iOS and WiFi knowledge base article?  If not, see if there is info in there that might help.
    Is the WiFi greyed out on all WiFi networks or just the one?  If it does this on all then there may be a hardwaer problem that needs attention from the techs at an Apple store genius bar.
    Before that, however, try a reboot by holding both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if it appears.  That clears a lot of iOS hang ups that occur.

  • I activated voice over and screen display is not shown and when touched, says time and "screen locked"

    activated voice over and screen display is not shown and when touched, says time and "screen locked"

    Hi muhsinmuhmmed,
    If you are having issues with Voice Over and a locked screen, you may find the following discussion helpful:
    Apple Support Communities: My iPad is locked and I can't type since VoiceOver is active.
    https://discussions.apple.com/thread/3933512
    Regards,
    - Brenden

  • How can I fix waiting for changes to be made and error -54 during sync with 7.1.2

    After updates my iphone5, ipad mini and ipad 3 to ios 7.1.2 cannot sync any of them due to error-54 or waiting for changes to be applied.  Was able to sync all before this update.  What is wrong?  How can I fix?

    Eject the device.
    Close and relaunch iTunes.
    If the problem continues, restart the computer and the device.

  • Hi, While writing an email online using Firefox 3.6.3, I was using one of the "CTRL+left or right arrow" to move the cursor along the text. I must have pressed some other key because the display has become huge - and I can't scroll vertically or horizont

    Hi, While writing an email online using Firefox 3.6.3, I was using one of the "CTRL+left or right arrow" to move the cursor along the text. I must have pressed some other key because the display has become huge - and I can't scroll vertically or horizontally, which makes using the Mail pages of Hotmail impossible. I have since logged in using MSFT Explorer and it works fine. This problem occurs only on the Mail page of Hotmail Live not on the home page or others.
    Could you please let me know if this is a problem with Firefox, or if you have any advice on how to reset the appearance of Hotmail in Firefox?
    == This happened ==
    Just once or twice
    == While I was compiling an email in Hotmail Live

    Wow, lightning fast and absolutely right!
    Thank you so much!

  • Hello. I have windows xp. When using Firefox as my home page, I get awful screen interference of lines verticle and horizontal. When I switch to Internet Explorer I don't get them. I want to keep Firefox as server.

    Hello. I have windows xp. When using Firefox as my home page, I get awful screen interference of lines verticle and horizontal. When I switch to Internet Explorer I don't get them. I want to keep Firefox as server.

    Here is something that you can try:
    # Click on Tools and then click Options.
    # Select the Advanced panel
    # Select the General tab
    # Uncheck Use hardware acceleration where available.
    # Click File and then click Exit.
    # Start Firefox normally.
    Once you have followed those steps, you'll want to follow these as well and see if the lines are gone.
    Click the Help menu and select Restart with Add-ons Disabled.
    Let me know if this has eliminated the problem.

Maybe you are looking for

  • Error while executing the DEBMAS06 idoc - (

    Hi, We are trying to create customers using LSMW with IDOC processing. The basic type used is DEBMAS06. In test execution, an error occurs while processing the partner function tab. The error is "Data is incomplete; check". The message number is F212

  • Result in a PDF file (as it appear when filled)

    I've done an interactive module with FormsCentral. I would like to have the result of the compilation of this module: -- sended via e-mail as an attached PDF file, to a specific e-mail and to the compiler. Is it possible? Thank you for the reply. Bes

  • Text Missing in the message

    Hi Friends, When I am creating message in  R/3 as well in sol  Mgr thru NOTIF_CREATE, we couldn't able to see long Text description (not short text). Accordingly when we are forwarding mesaage to user / processor, we couldn't see extra message which

  • Which albums is a photo in?

    In iPhoto, there is a Search box in the lower-right corner of the iPhoto window. That helps me search for a photo by name. If I have View -> Film Rolls enabled, then I can see what film roll the photo belongs to. That's great. However, it's not what

  • PSD file too large to reopen

    I have a 450MB PSD file that will not reopen in photoshop or illustrator. Are there any downloadable programs to resize the file or extract layers ? Any help asap will be appreciated!