How do I fix the Database Organizer Error when using Acrobat 9 Pro on desktop PC with Windows 8.1 and 64-bit OS?

After loading Acrobat 9 Pro on my desktop PC (Windows 8.1; 64-bit OS), opening and closing a previously saved pdf file, I constantly get a message pop-up that indicates a "database organizer" error.
How do I fix this?
I have read multiple responses at various forums and they do not seem to apply, or have not worked for others, with regard to the details of my version of Acrobat and Windows OS.
I'm beginning to think that the only solution is to purchase the latest version of Acrobat Pro and install it on my PC, which, of course, I would prefer not to do, unless this is my only viable option.
Can this problem, specific to my version of Acrobat and Windows OS, be fixed or is the simple answer:  purchase the latest version of Acrobat Pro, because there is no fix for my version of Acrobat/Windows OS?
Any help would be greatly appreciated.
FHW

Hi Frank ,
Please refer to the following link and see if this helps.
https://helpx.adobe.com/acrobat/kb/error-organizer-database-damaged-reset-1.html
Regards
Sukrit Dhingra

Similar Messages

  • How do I fix the "Expected handle" error when trying to transfer a file with FireFTP?

    I'm trying to upload a ZIP file to my FTP folder with Blackbaud and cannot do so. I've entered all the parameters exactly as instructed by Blackbaud and all connections look good but when I go to transfer the file, I get the following message: "Expected handle: /users/B67E610BAA01/"H:\Downloads\BUMFS RE7 Database.zip" "BUMFS RE7 Database.zip"." All I can do is click "OK" and nothing happens other than seeing a repeated loop in the log that alternates between "noop" and "ok."

    Make sure your account has the proper permissions to write to the location. I ran into this exact same problem, and that was my solution, anyway...

  • How do I fix the iTunes system error 7 windows error 126?

    How do I fix the iTunes system error 7 windows error 126?

    Sorry to hear about that
    Certainly hope this assists you:
    ≈≈≈≈≈≈≈≈
    https://discussions.apple.com/docs/DOC-6562
    ≈≈≈≈≈≈≈≈
    Please do respond with results/questions.

  • How do you fix a msvcr80.dll error when trying to install itunes 11.1.4

    How do you fix a msvcr80.dll error when trying to install itunes 11.1.4?

    This also work100% 
    Removing and reinstalling iTunes and other software components
    If applicable, disconnect any iPod or iOS device and close Microsoft Outlook.
    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later).
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (see note 1 below)
    iCloud (if present)
    MobileMe (if present) (see note 2 below)
    Bonjour
    Apple Application Support
    Reboot your computer. Delete any of the following folders where they can be found: (see note 3 below)
    C:\Program Files\Bonjour
    C:\Program Files\Common Files\Apple
    C:\Program Files\iPod
    C:\Program Files\iTunes
    also on 64-bit systems:
    C:\Program Files (x86)\Bonjour
    C:\Program Files (x86)\Common Files\Apple
    C:\Program Files (x86)\iPod
    C:\Program Files (x86)\iTunes
    Download the iTunes setup file and run it to install. Use an account with administrative rights. This can usually be achieved by right-clicking on the downloaded file and selecting Run as... or Run as Administrator. In some cases a combination of Shift or Ctrl keys may be required for the option to show, or it may not be necessary.
    If you deleted iCloud and reinstalling iTunes doesn't automatically reinstall it visit iCloud Control Panel.

  • How do I fix a "medium write error" when I try to burn a MP3 CD?

    how do I fix a "medium write error" when I try to burn a MP3 CD?
    Thanks,
    Jackie

    First, update your Mac OS 10.6.8 (Apple menu Software update).
    If that doesn't do it, try a different brand CD-R.

  • How to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3g or gPRS on safari with an iphone 4 and latest software updates

    Please can someone help me to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3G or GPRS on safari with an iphone 4GS and latest software updates. I have tried resetting the network and phone settings. I have restored the factory settings on itunes and still the problem persists.

    All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
    Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
    Message was edited by: modular747

  • How do I get the PDF Convert feature of Adobe Acrobat Pro Extended 9.4.4, which makes a PDF of a web page interactive, to work in Firefox 4.0.1?

    I just installed (on my Windows 7 Ultimate (64 bit) operating system/Intel i5 CPU M560 2.67 GHz) and am now using as my default browser Firefox 4.0.1 because Internet Explorer 9 was giving me so much trouble--lack of display of web content, lack of PDF reproduction when web content displayed, screwball formatting display, etc., all of which has been remedied by the mere installation of Firefox 4.0.1.
    How do I get the PDF Convert feature of Adobe Acrobat Pro Extended 9.4.4, which converts a web page to an interactive PDF, to set up and work on Firefox 4.0.1?

    You can not do that using Adobe Acrobat 9. Adobe never made a create PDF add-on for Firefox for use with Adobe Acrobat 9. They created a Firefox add-on for use with Acrobat X, but currently that one does not work with Firefox 4 though Adobe are working on an update.

  • [svn:fx-trunk] 10891: Fix for ASDoc throws error when using getter methods for pseudo-inheritance of static constants

    Revision: 10891
    Author:   [email protected]
    Date:     2009-10-06 09:46:47 -0700 (Tue, 06 Oct 2009)
    Log Message:
    Fix for ASDoc throws error when using getter methods for pseudo-inheritance of static constants
    QE notes: None.
    Doc notes: None
    Bugs: SDK-22676
    Tests run: checkintests
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-22676
    Modified Paths:
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocUtil.java

    Have you tried using com.adobe.air.crypto.EncryptionKeyGenerator instead?

  • How do you fix the itunes R6034 error

    How do you fix the R6034 error with itunes?

    A few more details....
    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • How to fix the 42408 unknown error when trying to authorize computer?

    I have 2 ipods which i use on th same account so they both have the same sogs and videos. I just recently tried to plug in the ipod videoto ge all my movies and tv shows and songs but it said that i neded to authorize my computer. I typed in my password and the friendly 42408 unknown error showed up..How do i fix this?

    In the course of your troubleshooting to date, have you worked through the following document?
    [iTunes: "Error 42408" or "Error 42404" after upgrading to iTunes 9.0.3|http://support.apple.com/kb/TS3258]

  • Error code 2324, what is this and how does one fix the issue?, error code 2324, what is this and how does one fix the issue?, error code 2324, what is this and how does one fix the issue?

    How does one fix error code 2324 that I receive each time I attempt to upgrade my iTunes.  Of course now iTunes will not work until this issue is fixed.  Thanks, D

    Let's try the fixit from the following Microsoft document with that one:
    Fix problems with programs that can't be installed or uninstalled

  • How do I fix the trash -8003 error

    I can't empty my trash. Any ideas?

    The reason why some of the files are blocking the trash from emptying is because of specific ".app" files from third party companies like Adobe products. Not the user files or the various help documents but instead the actual mother program. Here's how to fix this problem:
    1) remove from the trash all the actual software programs like Photoshop, InDesign, DreamWeaver and so on and put them on the desktop.
    2) Command "I" (info) and when the dialog box opens go to the "Name & Extension" text box and remove the ".app" from the software name. Example: Photoshop.app change to Photoshop.
    3) the program icon will change to a "folder icon".
    4) put the folder icon back into the trash and you should be able to now empty the trash.
    If you continue to get the error code 8003 it's because you may still have one or more software programs in the trash that needs to go through this process. Remember - it's not the user files or help documents or supporting files that is causing this but instead the "actual product programs".
    JKai

  • How do i fix the disk repair error that pops up when i plug my iPod into my computer?

    every time i plug my ipod into my mac a "Disk Repair" error pops up. how do i fix that?

    Try a low level reformat of your iPod using Disk Utility and the instructions in this article.
    http://www.methodshop.com/gadgets/ipodsupport/erase/
    B-rock

  • How do I fix the "shockwave flash" error, causing firefox to lock up, slow, or crash?

    continous errors about "shockwave flash", "script has stopped working" etc, causing numerous slowdowns, lock-ups, and crashes. have tried several fixes, but none have worked.....please advise

    Is it a permissions problem? Here's another way.
    (1) In a My Computer or Windows Explorer window, open this folder:
    C:\Windows\SysWOW64\Macromed\Flash
    If that folder does not exist, then you are using 32-bit Windows, and you can open the following folder instead:
    C:\Windows\System32\Macromed\Flash
    ''(Note: This folder exists on both 32-bit and 64-bit Windows, but on 64-bit Windows Firefox uses the Flash player in the SysWOW64 folder instead.)''
    (2) Check for a file named mms.cfg:
    (A) ''If mms.cfg exists,'' drag it to your '''Documents folder''' where you can edit it without being bothered about administrator privileges
    (B) ''If mms.cfg does not exist,'' open your '''Documents folder''', right-click > New > Text File and name the new file mms.cfg
    (3) Open mms.cfg from Documents into a text editor such as Notepad. Add this on its own line (I put it last):
    ProtectedMode=0
    Save the file and close Notepad.
    (4) Hold down the Ctrl key and drag the mms.cfg file back to the Flash folder to make a copy there, keeping the original in Documents
    This change should take effect the next time you restart Firefox.
    Hopefully that works around the permission issue.

  • How do I fix the uninstal set error message that continues to pop up

    when FF is open and I click on any item a message appears as follows: [JavaScript Application] ! uninstal set. This message appears each time I press the left mouse button and will not dissappear until i click on OK. How do I fix this

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for

  • Error in JMS Adapter:

    Receiving the below error, thought of JMS Drivers problems undeployed and re-deployed several times, but still problem persist in XI. Success     MP: Processing local module localejbs/SAP XI JMS Adapter/ConvertMessageToBinary 2010-09-09 11:45:21     

  • Third Party sale error

    Dear Gurus, The below error does not allow me to save the P.Order. I am configuring the standard third party sales schenario where the Item category is TAS and Schedule Line Cate. used  is CS. The material type I used is Trading Goods. I created a sa

  • OWB: Warning in Owb 10.2.0.5 has become an Error in 11.2.0.1

    Hi. I'm trying to find a way of recovering from errors in our WF's in Owb 11.2.0.1. In the dev/test/prod environments we are have today we are using Owb 10.2.0.5, WF 2.6.4 and Oracle 11.1.0.7 (running on AIX 6.1). Our WF strategy has been (and still

  • Doubt on bdc's

    i was trying my first bdc program. i wanted to record mm03 transaction. so i went to tcode SHDB, pressed new recording, gave a recording name and t-code mm03 and started recording. it asked for material number, i just entered one and pressed back to

  • Libraries and Classpath option panel is empty

    Hi All, Just installed Jdeveloper 11g 11.1.1.1.0 on Vista 64b. Added my jar file into "Manage Libraries" whent to the project properties, "Libraries and Classpath", but this pannel is empty, blank, does not have any options.... Any ideas what is wron