How do I gang automation? ie. I need to reduce the volume on the master fader, so I need to reduce the volume of all my faders ( ideally simultaneously.)

How do I gang automation? ie. I need to reduce the volume on the master fader, so I need to reduce the volume on all my faders (ideally simultaneously.)

Open the Mixer, select all the faders at once and lower 1 of them. the others will follow proportionally.
Or you can just put a gain plugin in the master output and lowerr the gain coming to the masterfader.

Similar Messages

HT4060 How long does it take to charge your ipad once the battery is all gone?

How long does it take to charge your ipad 4th generation with retina display once the battery is all gone?

About 5 hours using the 12W charger that came with it.

How to do Invoice Automation ( Converted PDF needs to be put in DMS)

Hi All,
i do have one requirement for Invoice Automation.
i need to develop the report to do invoice Automation.
the logic - first we need to run the tcode - VF31.
after the Printing of invoice i need to convert into PDF, then converted PDF need to be put into DMS.
i am not getting how to take forward .
kindly can u help me.
Thanks,
Manjunath

The attached form will help you in understanding the dynamic calculations.
Reading the table data with changes in the future..
a) If your application is a standalone application, (means you distribute the .PDF file directly to the users instead of rendering the PDF based on request), then you may need to hard code the data inside the form itself. - In this case, if the table data changes, you need to change the PDF and re-distribute the form.
b) If you are rendering the PDF on the fly based on the request, then you have the option of reading the data from the table (you need to do this in the parent application which is invoking the rendering process) and make it part of the input XML at the time of rendering. You need to write your code to read the XML and do the calculations for each request. - In this case, if the table data changes, PDF will get the latest information beacause the latest info is available in the input XML.
Thanks
Srini

TS4009 How can I change my iCloud Apple ID to be the same on all my devices?

I am using one Apple ID for basically everything now on iTunes. But some of my devices, iPad and iPhone use a different Apple ID. Also the Cloud Apple ID is different on my Mac Pro than the Apple TV I just set up. How can I change the iCould ID on my Mac Pro so I can start photo streaming from my computer to my TV?

Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

I settup Bootcamp drive on my Macbook pro retina. Loaded Windows 7. The necessary drivers to communicate with Win7 did not load. How do I get drivers for flash drive, etc. when the keyboard et. all do not work on Windows side?

Can't get Windows 7 to recognize my keyboard, usb drives, nor the mouse pad on my MacBook Pro. Have settup Bootcamp division and loaded Win 7. Apparantly the needed drivers did not load. How do I deal with this issue?
Thanks.

Got it working!
First off, I found out if you use a 32GB Flash Drive or larger, you need to format it with EXFAT format, not MS-DOS FAT. I was also trying to use USB 3.0 Flash Drives which may have something to do with my problems. I was successful in my installation attempt when I used an 8GB USB 2.0 Flash Drive formated in DOS/FAT.
Also ensure when you install Windows, that Windows 7 Premium (NOT Basic) is selected for installation (also had the option to install Windows 7 Professional and Ultimate but do not have the license for them). I did not see that window with all the options on any of my three previous installation attempts. I noticed that Windows 7 Basic is the default which may have been part of the problem.
Happy and safe New Years to all,
DJ

How can i use an existing vpn connection without using the option "Send all traffic over vpn connection"?

I have been trying to get my computer (os x.7) to astablish a remote desktop connection to my work computer via a vpn tunnel. In fact I have just discovered that it works fine if i select to "send all traffic over vpn connection" from the options in the advanced setup of the vpn.
If the option is selected microsofts "Remote desktop connection for mac" works just fine. However without selecting the option it is not taking advantage of the tunnel but tries to connect as if the tunnel would not exist.
Now the question is how do I get program to use the vpn tunnel without checking the above option?
Thanks for any hints and pointers.

Then can her computer be authorized to both accounts?
Absolutely. You can authorize any given computer to up to five iTunes Store accounts.
If purchases are made on her account, to a computer authorized to my account, can I put those songs on my iPod?
If you connect your iPod to her computer, yes. Tracks download only to the computer from which they're purchased, regardless of which iTunes Store account is used for the purchase. Or you could copy the tracks from her computer to yours and then authorize your computer to her iTunes Store account. But that's sort of defeating the original purpose, it would seem to me.
is it better to buy music through Amazon downloads and/or actually purchasing CDs to avoid the security features iTunes puts on its music?
That's certainly an option. If it's an entire album I want, I buy CDs. That way I can import them at the quality I want and to whichever of my systems I want. Amazon or one of the other download stores that offer tracks as MP3 are also an option, though for me download stores are best when you just want a couple of tracks off a given CD.

My Ipod Touch Was dropped and screen is broken. How can I get It Fixed? I cannot Unlock the Ipod Touch, all I can do is play Music and Change Songs.

I Dropped My Ipod Gen 4 on a Granite Floor and it Spider webbed. Now all I can do is Play songs and change songs from the lock screen. I cannot unlock the Ipod or do anything else. Is there any way for me to get it fixed Cheap???

Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
Apple - iPod Repair price
You can do it at an Apple store by making an appointment:
Apple Retail Store - Genius Bar
or send it in to Apple. See:
Service Answer Center - iPod
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit

How do i get rid of this code attached to the end of all my emails Preferences § 1 2 3 4 5 6 7 8 9 0 - = Backspace Tab q w e r t y u i o p [ ] Return capslock a s d f g h j k l ; ' \ shift ` z x c v b n m , . / shift English Deutsch Es

Please help me

Hello yde80,
I would check for email signatures being enabled. This article named Lion Mail: Use signatures found here http://support.apple.com/kb/ph4798
Create a signature
Choose Mail > Preferences, and then click Signatures.
From what you are describing this is the first place I would check.
All the best,
Sterling

How can I use Automator to extract specific Data from a text file?

I have several hundred text files that contain a bunch of information. I only need six values from each file and ideally I need them as columns in an excel file.
How can I use Automator to extract specific Data from the text files and either create a new text file or excel file with the info? I have looked all over but can't find a solution. If anyone could please help I would be eternally grateful!!! If there is another, better solution than automator, please let me know!
Example of File Contents:
Link Time =
DD/MMM/YYYY
Random
Text
161 179
bytes of CODE    memory (+                68 range fill )
16 789
bytes of DATA    memory (+    59 absolute )
1 875
bytes of XDATA   memory (+ 1 855 absolute )
90 783
bytes of FARCODE memory
What I would like to have as a final file:
EXCEL COLUMN1
Column 2
Column3
Column4
Column5
Column6
MM/DD/YYYY
filename1
161179
16789
1875
90783
MM/DD/YYYY
filename2
xxxxxx
xxxxx
xxxx
xxxxx
MM/DD/YYYY
filename3
xxxxxx
xxxxx
xxxx
xxxxx
Is this possible? I can't imagine having to go through each and every file one by one. Please help!!!

Hello
You may try the following AppleScript script. It will ask you to choose a root folder where to start searching for *.map files and then create a CSV file named "out.csv" on desktop which you may import to Excel.
set f to (choose folder with prompt "Choose the root folder to start searching")'s POSIX path
if f ends with "/" then set f to f's text 1 thru -2
do shell script "/usr/bin/perl -CSDA -w <<'EOF' - " & f's quoted form & " > ~/Desktop/out.csv
use strict;
use open IN => ':crlf';
chdir $ARGV[0] or die qq($!);
local $/ = qq(\\0);
my @ff = map {chomp; $_} qx(find . -type f -iname '*.map' -print0);
local $/ = qq(\\n);
#     CSV spec
#     - record separator is CRLF
#     - field separator is comma
#     - every field is quoted
#     - text encoding is UTF-8
local $\\ = qq(\\015\\012);    # CRLF
local $, = qq(,);            # COMMA
# print column header row
my @dd = ('column 1', 'column 2', 'column 3', 'column 4', 'column 5', 'column 6');
print map { s/\"/\"\"/og; qq(\").$_.qq(\"); } @dd;
# print data row per each file
while (@ff) {
    my $f = shift @ff;    # file path
    if ( ! open(IN, '<', $f) ) {
        warn qq(Failed to open $f: $!);
        next;
    $f =~ s%^.*/%%og;    # file name
    @dd = ('', $f, '', '', '', '');
    while (<IN>) {
        chomp;
        $dd[0] = \"$2/$1/$3\" if m%Link Time\\s+=\\s+([0-9]{2})/([0-9]{2})/([0-9]{4})%o;
        ($dd[2] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of CODE\\s/o;
        ($dd[3] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of DATA\\s/o;
        ($dd[4] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of XDATA\\s/o;
        ($dd[5] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of FARCODE\\s/o;
        last unless grep { /^$/ } @dd;
    close IN;
    print map { s/\"/\"\"/og; qq(\").$_.qq(\"); } @dd;
EOF
Hope this may help,
H

How do I reduce the size of all elements in a Motion project proportionately and simultaneously?

I have created a complex Motion project with many elements. Does anyone know how to reduce the size of all elements proportionately and simultaneously in order to shrink this down to a corner logo? Thanks

Sure.
In the Layers pane, IF all of your layers are already in a single Group (if you're really a beginner, then you probably just have the one group), all you need to do is select the Group "layer" containing your design elements and clone it (type - k) -- you'll get a new layer in a new group if it's a top level group of the project called Clone Layer. (If you have more than one group, select all of them --- however, if there is an FCPX Placeholder-drop-zone-looking-layer with a label like Effect Source or Title Background, don't select that -- you'll need to command-click select just the layers that make up your logo design). [You can alternately select *everything* and command click the layers you do not want to include in the Clone.]
Creating a clone of anything in no way changes that object or objects. A clone is like a composite viewer for objects/layers -- like a tv screen is to broadcast signals...
Uncheck the Cloned Group (or selected objects - if still selected, unchecking one will uncheck all of the selected layers) to inactivate it (this will not affect the clone visibility.)
Select the Clone Layer.
Use the Properties > Transform tools to scale and position the clone layer (changing the blend mode to something like hard light, overlay or similar, and adjusting the opacity makes for a nice "watermark" [corner logo]).
HTH (hope it's clear enough!)

Really how secure is the current erase all content and settings?

I am not sure about taking my iPhone in for repair or exchange after reading many old articles about how unsecure the erase really is, seeing how many sensitive passwords and e-mails I have. I have the most current firmware. So tell me, how reliable for keeping my data safe and gone is the current "Erase all content and settings" feature?
Also note: I have iPhone 3g, not later or earlier. So I am not sure if the hardware would make a difference, but yeah.
Message was edited by: nkcrcr

It is what it is. Erase all contents & settings overwrites user settings and information, writing a series of ones to the data partition. This process can take several hours, depending on the storage capacity of your iPhone. During this time, the device displays the Apple logo and a progress bar. If you had a 3GS, it would be instantaneous, as the 3GS supports hardware encryption. Can someone still recover data? Yes. But the software & equipment necessary to do so is very expensive & generally only available to law enforcement.

How can I use Automator to open and save Word docs with links?

Hi-
I'm having trouble building a Workflow to open and save Word docs with links.
My Workflow so far:
1. Get Finder items
2. Copy Finder items (to new folder)
3. Rename selected items
4. Open selected items (Word docs)
Three problems occur.
The first is a Word 2004 problem -- I can't get the warning "This document has links in it; do you want to open it with/without updating the links" to go away (Unilke the Macro warning toggle capability, there is nothing in the Preferences for Word 2004 that addresses the links warning, as far as I can tell; any insight you can shed on this would be terrific.)
The second problem happens with Automator: if I manually accept the update of the first document's links, Automator opens that document but then halts completely, even though I've instructed it to open multiple documents.
The third problem I have is that there's no Finder action in Automator that allows me to save the document that's now open (as far as I can see).
Any suggestions for how to fix? If I can get this to work, and scheduled in iCal, it will be an unbelievable time saver.
Thanks,
Jeremy
PowerPC G5 Mac OS X (10.4.6)

Hi there Jeremy,
to do this you are going to have to add in some Run AppleScript steps...
These will rely on GUI Scripting. So first you need to activate GUI Scripting.
Now we need to add in a Run AppleScript action to the end of your workflow...
This will replace your current number 4 in the workflow (Open Selected...)
click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">on run {input, parameters}
set allItems to every item of input
repeat with currItem in allItems
tell application "TextWrangler"
open currItem
end tell
activate application "TextWrangler"
tell application "System Events"
tell process "TextWrangler"
delay 2
--when the Word document is opened I have told it to press okay !
--I don't know what key you want it to press in the dialog box
keystroke return
delay 2
--save the doc
keystroke "s" using command down
delay 5
--close the doc
keystroke "w" using command down
end tell
end tell
end repeat
return input
end run</pre>
The above script should open each Word Document, press a button in the dialog box then do a save and then close the doc...then loop through the rest of them.
You need to replace the name Text Wrangler with Microsoft Word (or whatever it is called!), I don't have it on my Mac.
You will have to let me know what button needs pressing in the first dialog, if it isn't the 'highlighted ' one then we will have to amend the script...
regards
Ric

How to apply multiple automator workflows to one file

Hi everyone,
I've set up a few workflow applications to automate the process of making packshots from PDF files. The way those roughly work is they create a temporary copy in a folder, open a Photoshop droplet that executes all the actions on the file, and then save the finished product in a "finished" folder.
However, we frequently need to deliver multiple packshots made from the same file. I was asked to make one automator app that allowed us to drop the PDF version on it, resulting in the multiple types of packshots in the "finished" folder, together with the original PDF.
The way I have this set up right now is as follows:
1) Copy the original PDF file to the "finished" folder
2) Execute the first automator app
3) Execute the second automator app
This seems simple enough, and does work in 10.6.8. When I try it on a different computer in our studio though, with 10.7 installed, I get various errors:
- Sometimes it says an error occured within one of the automator apps, while the app works fine when running it seperately (on all computers).
- Sometimes it says something like "An error occurred while converting the data" when moving on from the first application to the second application
- Sometimes I'll get an error message in the log, saying:
*** -[_NSArrayl objectAtIndex:]: index 0 beyond bounds for empty array
What I got from this is that it's actually not getting the right input it requires (or not getting any input, since it's an empty array). However, the previous task is set to "return the task input" (our systems are Dutch so excuse me for any discrepancies in translations please), and the resulting output that I get seems to be what I want the next automator application to use. Below is a screenshot of the error message:
What I've tried:
- I read somewhere that the newer versions of Automator require the action "Retrieve selected finder items" between them. I've tried using this in various ways (between all other actions/tasks, only before the second application to be run and before both applications to be run), but with no success. The problem I have with these is that, during the applications, it moves the files around, thus apparently selecting those folders as well.
- Building an entirely new workflow on the newer system
- Using "Start application" instead of "Execute Automator workflow". This results in Automator saying that it did execute the workflow while nothing happened.
- Using "Ignore input" for the second application. This also results in Automator saying that it executed the workflow while nothing happened.
So right now, I'm pretty stumped as to how to get this combination of apps to work in 10.7. Any solutions or workarounds are most welcome.
Thanks in advance!

Yes, angelanna. You can merge or split your video file via FCP sequence.
ahaah, maybe I think angelanna would like to get the resulting file with MTS format because he mentioned “No need to be compressed”. Are you asking for this, angelanna?
If so, a simple MTS files managing and editing tool is needed. Maybe you can have a try the Mac version of Aunsoft Final Mate for managing HD camcorder footages. I just downloaded its free trial version and it offers a simple way of garping footages directly from camcorder. And also it provides a attractive feature to join flawlessly and split accurately native MTS files for video file output with original MTS format.
Maybe this is the tool cwhich an help you out, angelanna.
Enjoy your video.

HELP - Need to be able to RESET ALL CALENDARS to "FLOATING" - How To ???

These two quotes are from the Apple Forums - they never received an Answer - my problem is IDENTICAL to these gentlemen:
"Hi all,
I'm just a guy who recently migrated from Palm Desktop and who doesn't like to be in Madrid, for example, only to see his Chicago appointments listed seven hours ahead. I've been managing time zones in my head my whole life and don't really need or want iCal to "help" me out with it.
That said, does anyone know of a script available or other method that will allow one to change all events in iCal to "floating"? I would prefer to not have to do this one event at a time.
Thanks much for your thoughts and insight.
MacBook Mac OS X (10.4.7)
tonyhj"
"Re: Question re. converting multiple events to floating time zone
Posted: Sep 9, 2006 4:25 PM in response to: Ryan Grub
I'm glad this topic is here, and sad that it hasn't generated any useful replies in almost 20 days! I really had to dig before I found this unanswered question!
I've posted my own - somewhat comparable - problem and possibly someone will notice and answer. My question, posted Sept 9, is entitled "Can I disable 'time zone' actions done by iCal?"
Back to me, Real Time, August 5th, 2007:
Does ANYONE have a solution for this? How to GLOABLLY set ALL EVENTS (or at least all events in a given Calendar) to FLOATING, including RETROACTIVELY all the way back to the very beginning of a Calendar (or even all of iCal) ???
Perhaps an Automator Script???
Help Please!!!
Running:
iCal 2.0.5, Powerbook G4, OS X 10.4.9
Thanks!

Turning off Time Zones does not even remotely address the problem. All that does is solve the issue of not continuing to repeat the problem in the future. But at this moment I have literally HUNDREDS (perhaps thousands) of past event entries that need to be accessed for legal reasons, and the date / time is Critically Important..... and all the dates and times are fubar due to this time zone issue. Only resetting the events (PAST) to "Floating" resolves the problem, but how to do this with hundreds (1000's) of Past Events Entries?
i.e. How to Globally RESET all events to "Floating"?

How do I make automator automatically turn off the volume when I shutdown?

I want to make automator automatically run when I click the shutdown menu. How do I make it do this?

dpna wrote:
Yes it is a proper cover
If it is an APPLE COVER, perhaps it's not the one for that model. But, if it's not an Apple cover, then maybe the manufacturer hasn't set up the magnets the way they are supposed to be.
I'm going to quote from another post elsewhere ...
Are you using a genuine Apple cover or another third party cover?
It's the magnets in the cover which activate the lock/unlock feature to appear in your settings. In earlier iPads you could slide a magnet down the side of the iPad to find where the magnet activates and turn the feature on.....Apple have now changed how this works with the iPad Air. Whereas before there was only 1 magnet positioned in the cover for earlier iPads, it is now thought there are 2 with alternating polarity.
So if you want this feature you will need to buy an Apple cover or wait for third party manufacturers to get their magnets in the correct position.
If you do have a genuine Apple cover then there is something going wrong here....

How do I gang automation? ie. I need to reduce the volume on the master fader, so I need to reduce the volume of all my faders ( ideally simultaneously.)

Similar Messages

Maybe you are looking for