How do i get a keyboard when saving contacts to my iphone

hi, every time i want to save a new contact in my iphone i get problems with finding the keyboard. please help me

Sync it through iTunes

Similar Messages

  • How do I get my keyboard back in contacts on my iphone?

    How do I get my keyboard back in contacts on my iphone?
    It was working yesterday and not today.

    I too have this issue.  Have not been able to find the correction. Grrrrr. I have added contacts fine since downloading new system version. But it no longer gives me Tate keyboard to add contact with. What now?

  • How can I get the option in ma contact to say iPhone when I'm add someone's number that has a iphone?

    How can I get the option in ma contact to say iPhone when I'm add someone's number that has a iphone?

    about messaging http://support.apple.com/kb/HT3529
    troubleshooting message http://support.apple.com/kb/ts2755

  • Hello, how can i get my photos,videos,and contacts of my iphone transfer to my pc. As i have lost my iphone 4

    Hello, how can i get my photos,videos,and contacts of my iphone transfer to my pc. As i have lost my iphone 4

    If you don't have your iPhone anymore, you can't access the data on it remotely.
    However, if you are syncing to iCloud, you can set up iCloud syncing on your computer and at least get your contact info.
    iCloud: Set up iCloud on your devices
    You might also think about putting your device in lost mode or erasing it:
    What steps should I take if I misplace my device?
    If you ever misplace your device—whether it’s just lost or you think it may have been stolen—you should put it into Lost Mode immediately using Find My iPhone.
    Lost Mode locks your screen with a four-digit passcode and lets you display a custom message with your phone number to help you get it back. You can also remotely erase your device if needed, and your custom message will continue to display even after the device is erased.
    While Activation Lock works in the background to make it more difficult for someone to use or sell your missing device, Lost Mode clearly indicates to anyone who finds your device that it still belongs to you and can’t be reactivated without your password.
    To put a device into Lost Mode, sign in to icloud.com/find from a Mac or PC or use the Find My iPhone iOS app.
    For more information, read what to do if your device is lost or stolen.
    copied from Find My iPhone Activation Lock

  • HT4528 how do i get rid of suggested/ remembered contacts in my iphone?

    hello, i am trying to get rid of some wunwanted contacts in my iphone, when i am bout to send a message i go to the "TO:" and i type in any letter, a suggested name& number pop up. how do i get rid of it, even tho that contact doesnt exsit in my contacts anymore?
    any suggestions with this problem .
    please & thank you

    The only way to do that is to restore the phone as new (not from back up).

  • TS2755 How do i get rid of the "saved messages" on my iphone?

    whener i go to setting>general>usage it shows that i have 1.8gb of "saved messages". How do i get rid of these?

    Firstly you DO NOT have to do a factory reset / wipe device, it is simply not required to get the space back!!
    Mine had 3GB and I just got rid of it all, here is how:
    Make a backup in iTunes
    open iBackupBot (Google it)
    Go to the relevant backup
    Click on Multimedia File Manager and click on the other Multimedia files tab
    Sort by filename by clicking the Filename tab
    Find MediaDomain/Library/SMS/Attachments and highlight all of them, then press delete.  You can also click to export to a folder of your choice, if you want to save them that is. 
    Then go to System Files>MediaDomain>Library>SMS>Attachments
    They will be all listed here, highlight them all and press delete
    Then just restore that backup using iTunes! 
    Tadaa! Space recovered, your messages are still there but without the attachments! 
    P.S You may want to make two backups in case you get any of the above steps wrong, but it is simple to follow the above and not do anything wrong!

  • How do I get rid of the duplicate contacts on my iPhone?

    I just transferred my 3Gs apps and data to my new iphone5.  The contacts are now duplicated (a few times each) and are not identical.  I am using OS X version 10.8.2 with itunes and icloud.
    Any ideas how to merge or remove the unwanted contacts?  What causes this duplication?
    Any input would be appreciated!

    Duplicate contacts is usually caused by user error due to syncing between iTunes and iCloud simultaneously.  Turn off sync between either iCloud or iTunes and the duplicates should be removed.

  • When I get a call they say press one for english.How to I get the keyboard up?

    How do I get the keyboard when I am talking on the phone?

    The keyboard should automatically show up when you answer the calls, but what Johnathan said is correct.

  • How can I get my keyboard lights to come on?

    How can I get my keyboard lights to come on? When I press the button to turn them up higher, I get a sign meaning I cannot do that. Any help?

    MegoStello,
    There are a few situations when you won't see the keyboard light up as much as you might. If you're in a bright place or outside, the keyboard backlight won't come on. If you're on battery, your MBP may reduce power consumption by cutting off your backlit keyboard.
    On the other hand, you'll nearly always see the backlit keyboard if you're plugged in. In short, your MBP tries to manage your power usage according to your needs.
    MegoStello, if you found this info moderately useful, let me know in this thread. That's how I know if my info is what you need!

  • HT4528 A song I purchased shows up in iTunes, but will not show up on my iPhone.  When the phone is plugged into the computer, iTunes shows that it is on my iPhone, but it is not.  How do I get that song to show up on my iPhone?

    A song I purchased shows up in iTunes, but will not show up on my iPhone.  When the phone is plugged into the computer, iTunes shows that it is on my iPhone, but it is not.  How do I get that song to show up on my iPhone?

    I have the same problem and it only affects the one song, everything else syncs

  • How do I get more volume when watching a movie and can I use headphones?

    How do I get more volume when watching a movie? And can I also use headphones?

    Many governments now limit how loud headphones can go. Europe has been plagued with this for many years. Separate amplifiers are available.  
    I believe volumes should be kept at reasonable levels to avoid hearing loss, but it's not the governments job to protect me.
    I prefer Beyerdynamic over Bose Headphones. (They spend a lot less money on advertising.)
    http://www.amazon.com/beyerdynamic-DT770-PRO-250-ohm/dp/B0006NL5SM/ref=sr_1_1?s= electronics&ie=UTF8&qid=1308969660&sr=1-1

  • I have all my songs in my iTunes library on the computer, but when I press the button to sync it, it doesn't put the songs on my iPhone. I have songs from my iPod on here too.  How do I get it to put the songs on my iPhone?

    I have all my songs in my iTunes library on the computer, but when I press the button to sync it, it doesn't put the songs on my iPhone. I have songs from my iPod on here too. How do I get it to put the songs on my iPhone?

    Have you selected the music to sync?

  • How can we get ADFSecurity work when used in OC4J, OID and OAM?

    I am getting error in http server log "mod_oc4j: Response status=499 and reason=Oracle SSO, but failed to get mod_osso global context."
    But I am not using Oracle SSO and my client doesn't want to use it either, I am using OAM SSO(CoreIDSSO) in my configuration. Please read the details below.
    I am using ADFSecurity in an app that is protected by OAM. To migrate ADFSecurity permissions from
    system-jazn-data.xml to OID, I used JAZNMigrationTool to populate OID with Grantees and Permissions. OAM gives login page, and authentication works fine.
    But ADFSecurity is not working. ADFComponent Delete button is enabled even for roles that dont have permissions for the iterator delete.
    - The app works fine when I use without OAM. ADF Security permissions work fine.
    - The app works fine when used with OAM, but with ADFSecurity disabled (enforce=false).
    - When I enforce ADFSecurity alongwith OAM, ADFSecurity is not working.
    In the doc "Oracle Containers for J2EE Security Guide b28957", there is a mention of use of CoreIDPrincipal for permissions. Our OID Permissions entries show
    LDAPRealmRole for attribute orcljaznprincipal. I am not sure if this could be the reason.
    We have configured AccessServerSDK for the SOA instance and have policy for the urls in the policy manager. We have entries in orion-application.xml, orion-web.xml and system-jazn-data.xml as per the documentations.
    How can we get ADFSecurity work when used with OID and OAM?

    Have you been able to successfully integrate OAS with OAM & OID? We have similar requriement and so far we have not been able to get it working.
    We have application specific roles which we map to OID roles using orion-application.xml.
    Any pointers to achieve this would be greatly appreciated.
    thanks,
    Dipal

  • I recently got my ipod replaced and i have its serial number. now i used to play a game on it which requires me to have its UDID for account transfer so how do i get its UDID when i dont have the ipod now. i have a new one now.

    i recently got my ipod replaced and i have its serial number. now i used to play a game on it which requires me to have its UDID for account transfer so how do i get its UDID when i dont have the ipod now. i have a new one now.

    I would try contacting Apple.
    http://www.apple.com/support/ipodtouch/contact/

  • HT1338 my mac is running 10.5.8, I bought a new Nano, itunes is prompting me to get the current itunes, but my mac will not take it, states I need 10.6.8.  How do I get that?  When I run a software update, system says there is none.  Help

    my mac is running 10.5.8, I bought a new Nano, itunes is prompting me to get the current itunes, but my mac will not take it, states I need 10.6.8.  How do I get that?  When I run a software update, system says there is none.  Help

    Click here, check that your computer meets the requirements, buy and install the DVD, and then run Software Update.
    (73181)

Maybe you are looking for

  • Problem with HP Laserjet 6L and Windows 7 ( 64 bits )

    Hi. I have a new pc, with Windows 7 ( 64 bits ) and when I try to print , nothing happend.  Any body could tell me, what happend.  I update the driver following the instrucctions in HP but , nothing happend. I am breacking my head try searching the s

  • Pivot Table - Rows displayed

    Hi, I have a pivot table report which display complete report instead of showing 25 rows first. Due to large number of rows we are getting Out of memory issue. Is it possible to display 25 rows first in Pivot table. Please help - as users are unable

  • Powerbuilder an Chinese Characters

    I am using powerbuilder 12.5.2 Build 5006 with a MSSQL Server 2008 SP2 database.Version 10.0.5500.0 The connection to the database uses ODBC and the connect string is DBParm=ConnectString='DSN=StarKISHK_Dev;UID=;PWD=;APP=%app%;WSID=%wsid%',ConnectOpt

  • Simultaneo​us but Separate tasks in VI Logger

    Hello, We have two tools (A & B) that used to both send a signal to a PCI-6032E data acquisition board. The signal was being logged in VI Logger through a Traditional DAQmx task (we were using the version 1.1.1 of VI Logger). We had two separate VI L

  • How to cut-and-paste image into forms

    using forms9i, is it possible to cut and paste into a forms image field (database blob field) in the browser?