How do I get an icloud account to use icloud for Windows if I do not have a Mac or ipod?

I do not own an Apple products. However, I keep getting asked to subscribe to the icloud to see photos.  Is there anyway I can received the pictures or access icloud on my Windows PC.

You cannot set up an iCloud account without an Apple product of some sort to do it on.
Sorry,
GB

Similar Messages

  • How do i get rid of the annoying pop up for the adobe trial after i have bought and installed adobe pro?

    How do I get rid of the annoying pop up from the adobe trial after I have bought and installed adobe pro?

    This isn't an annoying pop-up. Rather, it is seriously telling you that it doesn't know that you have licensed the software, and it will continue to be a trial, and will stop when the 30 days are up.
    So you must tell it that you have licensed the software.

  • How do I get my contacts to sync using iCloud for iPhone and iPad.

    I can sync my pictures using icloud on my iPhone and my iPad however when I try to do the same for contacts having no luck. Also when I type a callander event on my iPad it comes up on my phone however when I type entry on iPad on calendar it does not come up on my phone.. Can anyone help.

    Yes I agree with iamjeremie above. I am a newbie and had some trouble with this myself over last few days but now sorted.
    You can also select existing cal entries, edit them and change calendar to correct one (iCloud cal in your case). Yes you need to set iCloud cal as default in settings. Also it may be worth disabling other unused or unwanted calendars in other accounts if you only want to use iCloud. Make sure to accept the prompt and save existing entries to device when disabling accounts so you do not loose or switch off your existing entries. Less confusing that way. Remember you can change entries to another cal in the future if you wish.
    Keep it simple. I now have 2 calendars set up on iPhone and one on iPad.
    Exchange cal for work. On exchange server at work and work stuff syncs with windows PC and server at work.
    Hotmail cal for personal stuff that syncs with work iPhone, home PC and personal iPad.
    I would have used iCloud for all but work iPhone and personal iPad are on separate iCloud accounts.
    This was a work around and works great for me and enables me to enter synced personal cal entries on my work iPhone.

  • How can I get iTunes Store to properly function on my windows 7 laptop? I have tried numerous things such as the MDos Promt, checked for firewall, checked for applications allowing iTunes to not be affected by anything. "Can't connect to network"

    How can I get my iTunes to function properly. It stopped working a couple of days ago and I can't figure how to get back and running. I have tried numerous things such as rebooting, checking for the network connection, applying it to open without security measures. Error message "Your connection time out. Check your connection." Even though I can get into the internet, iTunes is still not responding! Technical support help isn't helping!

    Just to close out ... the 'supervisor' was clueless as it turns out.  Apple does NOT have a deal with UPS on handling the Mini, so the person who gave me the info was wrong.  Did he call back?  No ... he just let me go out and find out myself.
    So I called again, and this time eventually ended up with a manager, who told me that the UPS Store thing wouldn't work, but that a box would arrive and then there would be a 'forced replacement'.
    About 10 minutes later he called back and said he discovered that EVERYTHING the supervisor did was wrong ... he didn't actually properly flag for auto-replace, so I would have gone through an identical cycle again!  So he had to restart the whole process, meaning I would get TWO 'coffins', but that I would then get an auto-replacement and would see that indicated in my support email.
    I got the email, saw 'auto-replace'.  Got the box on the 28th and immediately turned it around.  Apple got the box on the 31st, and on the 1st I got emails that my Mini would arrive on the 2nd and it also had the new serial #.
    Yesterday I grab the box from FedEx and go home to check it out.  As expected, it IMMEDIATELY worked on my WiFi without issue ... and has worked perfectly since.
    So ...
    - it was NOT my home network.
    - it WAS a hardware issue with the Mini
    - Apple does NOT do proper testing on the Mini to detect what appears to be a fairly common issue.
    - non-retail customers ARE treated as second-class by support.
    This issue took FOUR WEEKS to resolve, involved FOUR shipments back & forth, and the ONLY reason it got resolved was that *I* did the troubleshooting that Apple either would not or could not do.
    For someone who has been an Apple customer for more than 30 years, this has been a sobering experience ... I quite frankly expected much better from them.

  • How can I get ITunes to work again? Error message reads. "You do not have enough access privileges for this operation!

    Why do I get a message, "You do not have enough access privileges for this operation"? This has not been a problem before.

    Hello wdesertman,
    Thank you for contacting Apple Support Communities.
    This article explains what is going on and how to correct it:
    support.apple.com/kb/TS1277
    http://support.apple.com/kb/TS1277
    Regards,
    Jeff D.

  • How do I get the iPhone 6 if I am an international student and does not have a social security number?

    How do I get the iPhone 6 with a 2 year contract if I am an international student and does not have a social security number? I talked to many sales person. One person said I could not get it with contract at all. The other one said I need to pay a $400 security deposit. The last one said I should just enter 1 through 9 in the space provided for social security number.

        Thanks for reaching out to us about service with our awesome family monkrisann. Our sales team can provide you with the best options for starting service without a social security number. I recommend prepaid for the best option.
    Kinquana_VZW
    Follow us on Twitter @vzwsupport

  • HT5035 I have an $15.00 balance on my itunes account.How do I get in the account to use it?thanks

    I have a $15.00 balance on a gift card.How do I retreive it and use it?
    <Email Edited by Host>

    Welcome to the Apple Community.
    Use the redeem option in the top right corner of the store window.
    I have asked for your email address to be edited out. Posting your address in an open thread is a sure way to be bombarded by unwanted email, remember it will be here long after you have resolved your problem, for automated detection software to find.
    If you want people to contact you, enable others to see your email address in your profile.

  • How did I get IOS8 on my iPad when I never downloaded it (I do not have auto download)

    Hi..all of a sudden I had IOS8 download only iPad mini and I never authorized it…I have manual downloads checked in my setting so how could this happen..

    If you don't want iOS 8 at this time, do NOT press the install button under Settings/General/Software Update. Instead, go to Settings/Usage, wait for the list to partially populate, then tap "Show all Apps" and wait for the list to FULLY populate. Scroll though the list and find the iOS 8 update and delete it from there or else it will rob you of at least 3 GB of your storage space. At least this time around, apparently Apple is giving the user the option to delete the update. I have not verified this on my end, however other users have reported the ability to delete the download (as long as you have NOT installed it) However, they are still auto-pushing the update to devices *without the user's consent nor permission*. I feel for those who are on limited data and get this update pushed to them...Apple however doesn't seem to care.

  • When I try to go to my pintrest page I get this message: {"status": "404"}. What does this mean and how can I get to pintrest and stop using IE for that website

    Pintrest appears to be the only website where I am getting the error message: {"status": "404"}. So far all other sites come up.

    Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Press and hold Shift and left-click the Reload button.
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (MAC)
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    *https://support.mozilla.org/kb/how-clear-firefox-cache
    *https://support.mozilla.org/kb/Deleting+cookies

  • How do I encrypt a second hard drive using BitLocker for Windows 8.1?

    Hi there,
    I've encrypted my 1st HDD with BitLocker, however, I can't seem to find a way to encrypt my 2nd HDD too.
    More specifically, on my laptop I've got a SSD (successfully encrypted) and a HDD (yet to be encrypted).
    Any ideas on how this would be achievable? 
    Also, what if I want to encrypt an external backup HDD? 
    Thanks!
    Robert

    Hi,
    Could you check the file system of the system partition in the disk management, to see if it is NTFS or Fat32? If it is not NTFS, try to change it to NTFS.
    Two partitions are required to run BitLocker because pre-startup authentication and system integrity verification must occur on a separate partition from the encrypted operating system drive. This configuration helps protect the operating system and the
    information in the encrypted drive. In Windows Vista, the system drive must be 1.5 gigabytes (GB), but in Windows 7 this requirement has been reduced to 100 MB for a default installation. The system drive may also be used to store the Windows Recovery
    Environment (Windows RE) and other files that may be specific to setup or upgrade programs. Computer manufacturers and enterprise customers can also store system tools or other recovery tools on this drive, which will increase the required size of the system
    drive. For example, using the system drive to store Windows RE along with the BitLocker startup file will increase the size of the system drive to 300 MB. The system drive is hidden by default and is not assigned a drive letter. The system drive is created
    automatically when Windows 7 is installed.
    Best Regards,
    Jason Zeng

  • How can I get the direction handles to show up for the Position attribute?

    How can I get the direction handles to show up for the Position attribute?
    I have CS3 and I did the formentioned test and was able to make the handles work for the scale attribute but they don't seem to show when editing the position values.
    *I am in the graph editor looking at the "value graph"
    *I select the keys and convert the keys to auto bezier (I also tried the ease in and out buttons)
    *It changed the graph the way you might think (no longer linear) however the handles are not showing to edit further.
    *I also tried using the "convert vertex tool" (part of the pen tool) and still no luck getting those handles.
    *the handles only show up in the speed graph but that does me no good.
    Please help!
    THANKS 

    I don't have CS3 installed on any of my machines any more but your value graphs for position should look something like this:
    There are no handles for position in the Graph editor. You adjust the position curve by editing the motion path in the composition window. Press the G key to bring up the pen tool, then use the modifier keys Crtl/Cmnd and Alt/Option to temporarily switch between select and convert vertex to adjust the paths. Changes will be reflected in the value graphs. You will get editable handles with scale and rotation because these are not spatial properties. Spatial properties, position, Anchor Point, all XY & Z coordinates are edited in the comp window or in the layer window after revealing the properties. IOW, you edit anchor point position paths by opening up the layer window and choosing Anchor Point from the display options.
    The Manual isn't wrong. Here's a link to the live docs.

  • I have an icloud account which I can access via the web but when I go to systems preferences and click on the icloud it sends me to the mobileme closed site?? How do I get it to go to my icloud log in

    I have an icloud account which I can access via the web but when I go to systems preferences and click on the icloud it sends me to the mobileme closed site?? How do I get it to go to my icloud log in?

    You're saying that when you click on the  iCloud preference pane button it sends you to the defunct MMe
    rather than giving you this?
    Is your profile up to date, i.e. are your running 10.7.5?  Make sure you click on the iCloud button and not the MMe button.
    OT

  • TS3988 How do I get the email account that was in icloud?

    Hello, my manager handed me his phone off to resolve it and I restored and updated the iphone without knowing who was the account that was set up iCloud, and now I can not activate the phone. How do I get the email account that was in icloud that was configured on the phone? Starting email already know who is the account

    No one can give you that.  Ask your manager to contact the previous owner of the device.  They are the only one who can help you with this, either by providing the correct ID and password, or erasing the phone and removing it from their account as explained here: http://support.apple.com/kb/TS4515.

  • HT202667 I switched from att to charter internet and change e-mail address. I keep getting messages telling me my at&t iCloud account is not connected. How do I get rid of the at&t iCloud message?

    I switched from att to charter internet and change e-mail address. I keep getting messages telling me my at&t iCloud account is not connected. How do I get rid of the at&t iCloud message?

    Hi adamsfly,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like you changed your email address and iCloud is looking to sign in with the old Apple ID email. I would recommend that you read this article, it may be able to help the issue.
    What to do after you change your Apple ID email address or password - Apple Support
    Cheers,
    Mario

  • How can I sync my various email accounts into an iCloud account.  Example.  I have an embarqmail.account.  How can I get it to sync with iPhone, iPad, iMac so that I don't have to read or review eMails on all 3 devices.  Thanks

    How can I sync my various email accounts into an iCloud account.  Example.  I have an embarqmail.account.  How can I get it to sync with iPhone, iPad, iMac so that I don't have to read or review eMails on all 3 devices.  Thanks

    You need OSX 10.7.2 or higher in order to access icloud.  The mobile me account is now defunct (it closed down more than a year ago).

Maybe you are looking for

  • Need Help Creating Advanced Interacives in InDesign

    I am a graphic designer for a multinational New Zealand based company and we are looking to create an interactive offline web site or flash programme that our reps can use to introduce people to our products. We are looking for something akin to what

  • Error:IDOC_ADAPTER" ATTRIBUTE_INV_SND_PARTY : File to IDOC scenario .

    Dear XI experts , Issue : Error to a new implementated SAP ERP SYSTEM . File to IDOC Scenario Business Scenario :  Exchange Rates from Thomas REuters (XML) - > XI-> SAP 1 , SAP 2  ERP Systems ( 2 diff SAP ERP systems) SAP 2 is a new  system set up fo

  • Internal Essbase JAPI Error (Report error when executing query)

    Hi all, I have a report that queries against an Essbase Reporting Cube. The reports prompt a JAPI error message when querying a parent level member that exceeds 256 members. The error displayed says that the number of columns on the report exceeds th

  • Javascript backend scripts - Query response hangs

    I am modifying a database Read script to filter based on data within a related table. However, when this is executed from my iOS app, it hangs. A response is never sent back. Here's what I have. What am I doing wrong? function read(query, user, reque

  • Newbie query - Accessing Cookie in new browser window

    Hi - I have created a cookie in my JSP page. I could read from the same cookie in the same browser window. However when I try to read the cookie from another browser window, its not posisble. Can somebody throw some light?